Polarization‐Driven Self‐Powered Photodetection in a Single‐Phase Biaxial Hybrid Perovskite Ferroelectric

Self‐powered photodetection driven by ferroelectric polarization has shown great potential in next‐generation optoelectronic devices. Hybrid perovskite ferroelectrics that combine polarization and semiconducting properties have a promising position within this portfolio. Herein, we demonstrate the realization of self‐powered photodetection in a new developed biaxial ferroelectric, (EA)₂(MA)₂Pb₃Br₁₀ ( 1 , EA is ethylammonium and MA is methylammonium), which displays high Curie temperature (375 K), superior spontaneous polarization (3.7 μC cm^?2), and unique semiconducting nature. Strikingly, without an external energy supply, 1 exhibits an direction‐selectable photocurrent with fascinating attributes including high photocurrent density (≈4.1 μA cm^?2), high on/off switching ratio (over 10⁶), and ultrafast response time (96/123 μs); such merits are superior to those of the most active ferroelectric oxide BiFeO₃. Further studies reveal that strong inversion symmetry breaking in 1 provides a desirable driving force for carrier separation, accounting for such electrically tunable self‐powered photoactive behaviors. This work sheds light on exploring new multifunctional hybrid perovskites and advancing the design of intelligent photoelectric devices.     

Molecular Engineering of Conjugated Acetylenic Polymers for Efficient Cocatalyst‐free Photoelectrochemical Water Reduction

Conjugated polymers featuring tunable band gaps/positions and tailored active centers, are attractive photoelectrode materials for water splitting. However, their exploration falls far behind their inorganic counterparts. Herein, we demonstrate a molecular engineering strategy for the tailoring aromatic units of conjugated acetylenic polymers from benzene‐ to thiophene‐based. The polarized thiophene‐based monomers of conjugated acetylenic polymers can largely extend the light absorption and promote charge separation/transport. The C≡C bonds are activated for catalyzing water reduction. Using on‐surface Glaser polycondensation, as‐fabricated poly(2,5‐diethynylthieno[3,2‐b]thiophene) on commercial Cu foam exhibits a record H₂‐evolution photocurrent density of 370 μA cm^?2 at 0.3 V vs. reversible hydrogen electrode among current cocatalyst‐free organic photocathodes (1–100 μA cm^?2). This approach to modulate the optical, charge transfer, and catalytic properties of conjugated polymers paves a critical way toward high‐activity organic photoelectrodes.     

Ge‐Mediated Modification in Ta3N5 Photoelectrodes with Enhanced Charge Transport for Solar Water Splitting

Ta₃N₅ is a promising photoanode candidate for photoelectrochemical water splitting, with a band gap of about 2.1 eV and a theoretical solar‐to‐hydrogen efficiency as high as 15.9 % under AM 1.5 G 100 mW cm^?2 irradiation. However, the presently achieved highest photocurrent (ca. 7.5 mA cm^?2) on Ta₃N₅ photoelectrodes under AM 1.5 G 100 mW cm^?2 is far from the theoretical maximum (ca. 12.9 mA cm^?2), which is possibly due to serious bulk recombination (poor bulk charge transport and charge separation) in Ta₃N₅ photoelectrodes. In this study, we show that volatilization of intentionally added Ge (5 %) during the synthesis of Ta₃N₅ promotes the electron transport and thereby improves the charge‐separation efficiency in bulk Ta₃N₅ photoanode, which affords a 320 % increase of the highest photocurrent comparing with that of pure Ta₃N₅ photoanode under AM 1.5 G 100 mW cm^?2 simulated sunlight.     

Centimeter‐Sized Single Crystal of Two‐Dimensional Halide Perovskites Incorporating Straight‐Chain Symmetric Diammonium Ion for X‐Ray Detection

Two‐dimensional (2D) AA′_n?1M_nX_3n+1 type halide perovskites incorporating straight‐chain symmetric diammonium cations define a new type of structure, but their optoelectronic properties are largely unexplored. Reported here is the synthesis of a centimeter‐sized AA′_n?1M_nX_3n+1 type perovskite, BDAPbI₄ (BDA=NH₃C₄H₈NH₃), single crystal and its charge‐transport properties under X‐ray excitation. The crystal shows a staggered configuration of the [PbI₆]^4? layers, a band gap of 2.37 eV, and a low trap density of 3.1×10⁹ cm^?3. The single‐crystal X‐ray detector exhibits an excellent sensitivity of 242 μC Gy_air^?1 cm^?2 under the 10 V bias (0.31 V μm^?1), a detection limit as low as 430 nGy_air s^?1, ultrastable response current, a stable baseline with the lowest dark current drift of 6.06×10^?9 nA cm^?1 s^?1 V^?1, and rapid response time of τ_rise=7.3 ms and τ_fall=22.5 ms. These crystals are promising candidates for the next generation of optoelectronic devices.     

Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications

A core‐shell structure with CuO core and carbon quantum dots (CQDs) and carbon hollow nanospheres (CHNS) shell was prepared through facile in‐situ hydrothermal process. The composite was used for non‐enzymatic hydrogen peroxide sensing and electrochemical overall water splitting. The core‐shell structure was established from the transmission electron microscopy image analysis. Raman and UV‐Vis spectroscopy analysis confirmed the interaction between CuO and CQDs. The electrochemical studies showed the limit of detection and sensitivity of the prepared composite as 2.4 nM and 56.72 μA μM^?1 cm^?2, respectively. The core‐shell structure facilitated better charge transportation which in turn exhibited elevated electro‐catalysis towards hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting. The overpotential of 159 mV was required to achieve 10 mA cm^?2 current density for HER and an overpotential of 322 mV was required to achieve 10 mA cm^?2 current density for OER in 1.0 M KOH. A two‐electrode system was constructed for overall water splitting reaction, which showed 10 and 50 mA cm^?2 current density at 1.83 and 1.96 V, respectively. The prepared CuO@CQDs@CHNS catalyst demonstrated excellent robustness in HER and OER catalyzing condition along with overall water splitting reaction. Therefore, the CuO@CQDs@CHNS could be considered as promising electro‐catalyst for H₂O₂ sensing, HER, OER and overall water splitting.     

Room‐Temperature Ferroelectric Material Composed of a Two‐Dimensional Metal Halide Double Perovskite for X‐ray Detection

Although two‐dimensional (2D) metal–halide double perovskites display versatile physical properties due to their huge structural compatibility, room‐temperature ferroelectric behavior has not yet been reported for this fascinating family. Here, we designed a room‐temperature ferroelectric material composed of 2D halide double perovskites, (chloropropylammonium)₄AgBiBr₈, using an organic asymmetric dipolar ligand. It exhibits concrete ferroelectricity, including a Curie temperature of 305 K and a notable spontaneous polarization of ≈3.2 μC cm^?2, triggered by dynamic ordering of the organic cation and the tilting motion of heterometallic AgBr₆/BiBr₆ octahedra. Besides, the alternating array of inorganic perovskite sheets and organic cations endows large mobility‐lifetime product (μτ=1.0×10^?3 cm² V^?1) for detecting X‐ray photons, which is almost tenfold higher than that of CH₃NH₃PbI₃ wafers. As far as we know, this is the first study on an X‐ray‐sensitive ferroelectric material composed of 2D halide double perovskites. Our findings afford a promising platform for exploring new ferroelectric materials toward further device applications.     

Visible light active hydrogen modified (HM)-n-TiO2 thin films for photoelectrochemical splitting of water

Visible light active hydrogen modified n-type titanium oxide (HM-n-TiO₂) thin films were synthesized by thermal oxidation of Ti metal sheet (Alfa Co. 0.25 mm thick) in an electric oven followed by incorporation of hydrogen electrochemically under cathodic polarization at ?1.6 V vs Pt. The photoresponse of the HM-n-TiO₂ was evaluated by measuring the rate of water splitting reaction to hydrogen and oxygen in terms of photocurrent density, J_p. The optimized electric oven-made n-TiO₂ and HM-n-TiO₂ photoelectrodes showed photocurrent densities of 0.2 mA cm^?2 and 1.60 mA cm^?2, respectively, at a measured potential of ?0.4 V vs Pt at illumination intensity of 100 mW cm^?2 from a 150 W xenon lamp. This indicated an eightfold increase in photocurrent density for HM-n-TiO₂ compared to oven-made n-TiO₂ at the same measured electrode potential. The band-gap energy of HM-n-TiO₂ was found to be 2.7 eV compared to 2.82 eV for electric oven-made n-TiO₂ and a mid-gap band at 1.67 eV above the valence band was also observed. The HM-n-TiO₂ thin film photoelectrodes were characterized using photocurrent density under monochromatic light illumination and UV–Vis spectral measurements.     

Enhancing the Water Splitting Efficiency of Sn‐Doped Hematite Nanoflakes by Flame Annealing

The effect of flame annealing on the water‐splitting properties of Sn decorated hematite (α‐Fe₂O₃) nanoflakes has been investigated. It is shown that flame annealing can yield a considerable enhancement in the maximum photocurrent under AM 1.5 (100 mW cm^?2) conditions compared to classic furnace annealing treatments. Optimizing the annealing time (10 s at 1000 °C) leads to a photocurrent of 1.1 mA cm^?2 at 1.23 V (vs. RHE) with a maximum value 1.6 mA cm^?2 at 1.6 V (vs. RHE) in 1 M KOH. The improvement in photocurrent can be attributed to the fast direct heating that maintains the nanoscale morphology, leads to optimized Sn decoration, and minimizes detrimental substrate effects.     

Bioelectrocatalytic Activity of Immobilized Alcohol Oxidase on 4‐(pyrrole‐1‐yl) Benzoic Acid Modified Carbon Nanotubes

A novel bioelectrocatalytic system was prepared by immobilizing alcohol oxidase (AOx) onto multiwalled carbon nanotubes (MWCNT) modified with 4‐(pyrrole‐1‐yl) benzoic acid (PyBA). Functional carboxylic groups from PyBA create covalent amide linkages with amine groups from the enzyme molecule and provide an anchor for the effective immobilization of AOx improving the stability of the whole system. The immobilized enzyme displayed a pair of reversible redox peaks of flavin adenine dinucleotide (FAD) cofactor with the formal potential E^0’=?0.451 V. The response showed a surface‐controlled electrode process with the heterogeneous electron transfer rate constant k_s=2.7 s^?1. Under aerobic conditions AOx(FADH₂) can be oxidized to AOx(FAD) by oxygen, which then reacts with ethanol decreasing the cathodic response, which could be used for ethanol detection with a high sensitivity 13.1 μA mM^?1 cm^?2. The lack of bioactivity towards ethanol in anaerobic conditions suggests the presence of two types of AOx molecules in the system: active with oxygen maintaining the direct electron transfer feature and not active without a redox mediator, due to the deeply embedded FAD cofactor. The polarization curve showed that the electrooxidation current of ethanol appears at ?410 mV and reaches 2.0 µA cm^?1 at ?300 mV. In this case, the bioactivity of AOx to ethanol can be observed offering promising solution for the development of mediatorless systems for application to biosensors and biofuel cells.     

Application of the Tris(acetylacetonato)iron(III)/(II) Redox Couple in p‐Type Dye‐Sensitized Solar Cells

An electrolyte based on the tris(acetylacetonato)iron(III)/(II) redox couple ([Fe(acac)₃]^0/1?) was developed for p‐type dye‐sensitized solar cells (DSSCs). Introduction of a NiO blocking layer on the working electrode and the use of chenodeoxycholic acid in the electrolyte enhanced device performance by improving the photocurrent. Devices containing [Fe(acac)₃]^0/1? and a perylene–thiophene–triphenylamine sensitizer (PMI–6T–TPA) have the highest reported short‐circuit current (J_SC=7.65 mA cm^?2), and energy conversion efficiency (2.51 %) for p‐type DSSCs coupled with a fill factor of 0.51 and an open‐circuit voltage V_OC=645 mV. Measurement of the kinetics of dye regeneration by the redox mediator revealed that the process is diffusion limited as the dye‐regeneration rate constant (1.7×10⁸ M ^?1 s^?1) is very close to the maximum theoretical rate constant of 3.3×10⁸ M ^?1 s^?1. Consequently, a very high dye‐regeneration yield (>99 %) could be calculated for these devices.     

Electroconductive Hydrogels: Electrical and Electrochemical Properties of Polypyrrole‐Poly(HEMA) Composites

Composites of inherently conductive polypyrrole (PPy) within highly hydrophilic poly(2‐hydroxyethyl methacrylate)‐based hydrogels (p(HEMA)) have been fabricated and their electrochemical properties investigated. The electrochemical characteristics observed by cyclic voltammetry suggest less facile reduction of PPy within the composite hydrogel compared to electropolymerized PPy, as shown by the shift in the reduction peak potential from ?472 mV for electropolymerized polypyrrole to ?636 mV for the electroconductive composite gel. The network impedance magnitude for the electroconductive hydrogel remains quite low, ca. 100 Ω, even upon approach to DC, over all frequencies and at all offset potentials suggesting retained electronic (bipolaronic) conductivity within the composite. In contrast, sustained application of +0.7 V (vs. Ag/AgCl, 3 M Cl^?) for typically 100 min. (conditioning) to reduce the background amperometric current to <1.0 μA, resulted in complete loss of electroactivity. Nyquist plots suggest that sustained application of such a modest potential to the composite hydrogel results in impedance characteristics that resembles p(HEMA) without evidence of the conducting polymer component. PPy composite gels supported a larger ferrocene monocarboxylate diffusivity (D_appt=7.97×10^?5 cm² s^?1) compared to electropolymerized PPy (D_appt=5.56×10^?5 cm² s^?1), however a marked reduction in diffusivity (D_appt=1.01×10^?5 cm² s^?1) was observed with the conditioned hydrogel composite. Cyclic voltammograms in buffer containing H₂O₂ showed an absence of redox peaks for electrodes coated with PPy‐containing membranes, suggesting possible chemical oxidation of polypyrrole by the oxidant     

Functionalized Alkynylplatinum(II) Polypyridyl Complexes for Use as Sensitizers in Dye‐Sensitized Solar Cells

A series of platinum(II) alkynyl‐based sensitizers has been synthesized and found to show light‐to‐electricity conversion properties. These dyes were developed as sensitizers for the application in nanocrystalline TiO₂ dye‐sensitized solar cells (DSSCs). Their photophysical and electrochemical properties were studied. The excited‐state property was probed using nanosecond transient absorption spectroscopy, which showed the formation of a charge‐separated state that arises from the intramolecular photoinduced charge transfer from the platinum(II) alkynylbithienylbenzothiadiazole moiety (donor) to the polypyridyl ligand (acceptor). A lifetime of 3.4 μs was observed for the charge‐separated state. A dye‐sensitized solar cell based on one of the complexes showed a short‐circuit photocurrent of 7.12 mA cm^?2, an open circuit voltage of 780 mV, and a fill factor of 0.65, thus giving an overall power conversion efficiency of 3.6 %.     

Hemoglobin‐Titanate Composite Based Biosensor for the Amperometric Determination of Hydrogen Peroxide in Acidic Medium

A hemoglobin‐titanate composite based biosensor was chosen for determination of H₂O₂ in an acidic medium. CV results of the Hb‐titanate modified pyrolytic graphite electrode showed a pair of well‐defined, quasi‐reversible redox peaks centered at ?246 mV (vs. Ag/AgCl) in a pH 5.0 HAc‐NaAc buffer solution. The modified electrode exhibited good electrocatalytic response for monitoring H₂O₂ and had a large linear detection range from 20 μM to 3.2 mM with a detection limit of 8 μM (S/N=3) and a sensitivity of 29.7 mA M^?1 cm^?2 in the pH 5.0 solution. The biosensor also possessed good long term storage stability.     

Coupling of Bifunctional CoMn‐Layered Double Hydroxide@Graphitic C3N4 Nanohybrids towards Efficient Photoelectrochemical Overall Water Splitting

The development of durable, low‐cost, and efficient photo‐/electrolysis for the oxygen and hydrogen evolution reactions (OER and HER) is important to fulfill increasing energy requirements. Herein, highly efficient and active photo‐/electrochemical catalysts, that is, CoMn‐LDH@g‐C₃N₄ hybrids, have been synthesized successfully through a facile in situ co‐precipitation method at room temperature. The CoMn‐LDH@g‐C₃N₄ composite exhibits an obvious OER electrocatalytic performance with a current density of 40 mA cm^?2 at an overpotential of 350 mV for water oxidation, which is 2.5 times higher than pure CoMn‐LDH nanosheets. For HER, CoMn‐LDH@g‐C₃N₄ (η₅₀=?448 mV) requires a potential close to Pt/C (η₅₀=?416 mV) to reach a current density of 50 mA cm². Furthermore, under visible‐light irradiation, the photocurrent density of the CoMn‐LDH@g‐C₃N₄ composite is 0.227 mA cm^?2, which is 2.1 and 3.8 time higher than pristine CoMn‐LDH (0.108 mA cm^?2) and g‐C₃N₄ (0.061 mA cm^?2), respectively. The CoMn‐LDH@g‐C₃N₄ composite delivers a current density of 10 mA cm^?2 at 1.56 V and 100 mA cm^?2 at 1.82 V for the overall water‐splitting reaction. Therefore, this work establishes the first example of pure CoMn‐LDH and CoMn‐LDH@g‐C₃N₄ hybrids as electrochemical and photoelectrochemical water‐splitting systems for both OER and HER, which may open a pathway to develop and explore other LDH and g‐C₃N₄ nanosheets as efficient catalysts for renewable energy applications.     

2,2‐Bis(3‐Amino‐4‐hydroxyphenyl)hexafluoropropane Modified Glassy Carbon Electrodes as Selective and Sensitive Voltammetric Sensors. Selective Detection of Dopamine and Uric Acid

2,2‐bis(3‐Amino‐4‐hydroxyphenyl)hexafluoropropane (BAHHFP) was electro‐polymerized oxidatively on glassy carbon by cyclic voltammetry. The activity of the modified electrode towards ascorbic acid (AA), uric acid (UA) and dopamine (DA) was characterized with cyclic voltammetry and differential puls voltammetry (DPV). The findings showed that the electrode modification drastically suppresses the response of AA and shifts it towards more negative potentials. Simultaneously an enhancement of reaction reversibility is seen for DA and UA. Unusual, selective preconcentration features are observed for DA when the polymer‐modified electrode is polarized at negative potential. In a ternary mixture containing the three analytes studied, three baseline resolved peaks are observed in DPV mode. At physiological pH 7.4, after 5 min preconcentration at ?300 mV, peaks positions were ?0.073, 0.131 and 0.280 V (vs. Ag/AgCl) for AA, DA and UA, respectively. Relative selectivities DA/AA and UA/AA were over 4000 : 1 and 700 : 1, respectively. DA response was linear in the range 0.05–3 μM with sensitivity of 138 μA μM^?1 cm^?2 and detection limit (3σ) of 5 nM. Sensitive quantification of UA was possible in acidic solution (pH 1.8). Under such conditions a very sharp peak appeared at 630 mV (DPV). The response was linear in the range 0.5–100 μM with sensitivity of 4.67 μA μM^?1 cm^?2 and detection limit (3σ) of 0.1 μM. Practical utility was illustrated by selective determination of UA in human urine.     

Single‐Nanoparticle Collision Events: Tunneling Electron Transfer on a Titanium Dioxide Passivated n‐Silicon Electrode

Single‐nanoparticle collisions were observed on an n‐type silicon electrode (600 μm diameter) passivated by a thin layer of amorphous TiO₂, where the current steps occurred by tunneling electron transfer. The observed collision frequency was in reasonable agreement with that predicted from theory. The isolated electrode, after a collision experiment, with a Pt/TiO₂/n‐Si architecture was shown to retain the photoelectrochemical properties of n‐Si without photocorrosion or current decay. The Pt/TiO₂/n‐Si electrode produced 19 mA cm^?2 of photocurrent density under 100 mW cm^?2 irradiation from a xenon lamp during oxygen evolution without current fading for over 12 h.     

Photovoltaic properties of Pt/BiFeO3 thin film/fluorine-doped tin oxide capacitor

We study the photovoltaic properties of the Pt/BiFeO₃ (BFO) thin film/fluorine-doped tin oxide capacitor and obtain the open circuit voltage (V _oc) of 0.44 V and short circuit photocurrent (J _sc) of 0.14 mA/cm² under purple laser illumination. As compared to the BFO film with random orientations, the BFO film with a strong preferred orientation exhibits larger photovoltaic output as a result of its larger spontaneous polarization in the unpoled state. We further demonstrate that there is remarkable influence of external electric field poling on the photovoltage in the two polycrystalline BFO films, and the larger net change of the photovoltage after positive and negative poling in the highly preferred oriented BFO film is believed to be due to its improved crystalline structure. Our experiment results indicate that the responsiveness to external electric field and photovoltaic performance of the narrow-band-gap BFO film can be optimized by structural modification, making it possible to apply in the photosensitive and other optoelectronic devices.     

Properties of semiconductor electrodes coated with living films of cyanobacteria

IntactPhormidium sp. cells, immobilized on a SnO₂ semiconductor electrode, are capable of transferring electrons to SnO₂ in a light-dependent reaction. Drying a “wet” algal electrode at 50°C for 60 min increases photocurrent output capacity by 100-fold. We have studied the effect of various parameters on photocurrent generation. The magnitude of the photocurrent increased with increasing light intensity and depended on the nature of the electrolyte solution. The output, about 8 μA 10 μg Chl^?1 cm⁺², was obtained using 50 mM H₃BO₃?Na₂CO₃?KCl buffer as an electrolyte, an irradiance (>460 nm) of 250 J/m², and potentiostatic conditions (the algal working electrode was poised at +0.6 V vs a saturated calomel electrode). The yield was more than doubled upon addition of an electron carrier, such as methyl viologen, benzyl viologen, or Vitamin K₃, to the electrolyte solution. Maximum photocurrent was obtained at around pH 8 and 45°C, which are optimal conditions for growth of the cyanobacterium. Furthermore, DCMU, an inhibitor of photosynthetic electron flow, drastically decreased the yield, as did heat treatment of the electrode at 110°C for 15 min. The photocurrent action spectrum peak coincided well with the absorption peak of the light-harvesting pigment, phycocyanin. These results support the idea that electron transfer can occur across algal cell walls from the source of the light-induced reactions located within the lamellar membranes to the semiconductor electrode.     

Two C3‐Symmetric Dy3III Complexes with Triple Di‐μ‐methoxo‐μ‐phenoxo Bridges,Magnetic Ground State,and Single‐Molecule Magnetic Behavior

Two series of isostructural C₃‐symmetric Ln₃ complexes Ln₃ ? [BPh₄] and Ln₃ ? 0.33[Ln(NO₃)₆] (in which Ln^III=Gd and Dy) have been prepared from an amino‐bis(phenol) ligand. X‐ray studies reveal that Ln^III ions are connected by one μ₂‐phenoxo and two μ₃‐methoxo bridges, thus leading to a hexagonal bipyramidal Ln₃O₅ bridging core in which Ln^III ions exhibit a biaugmented trigonal‐prismatic geometry. Magnetic susceptibility studies and ab initio complete active space self‐consistent field (CASSCF) calculations indicate that the magnetic coupling between the Dy^III ions, which possess a high axial anisotropy in the ground state, is very weakly antiferromagnetic and mainly dipolar in nature. To reduce the electronic repulsion from the coordinating oxygen atom with the shortest Dy?O distance, the local magnetic moments are oriented almost perpendicular to the Dy₃ plane, thus leading to a paramagnetic ground state. CASSCF plus restricted active space state interaction (RASSI) calculations also show that the ground and first excited state of the Dy^III ions are separated by approximately 150 and 177 cm^?1, for Dy₃ ? [BPh₄] and Dy₃ ? 0.33[Dy(NO₃)₆], respectively. As expected for these large energy gaps, Dy₃ ? [BPh₄] and Dy₃ ? 0.33[Dy(NO₃)₆] exhibit, under zero direct‐current (dc) field, thermally activated slow relaxation of the magnetization, which overlap with a quantum tunneling relaxation process. Under an applied H_dc field of 1000 Oe, Dy₃ ? [BPh₄] exhibits two thermally activated processes with U_eff values of 34.7 and 19.5 cm^?1, whereas Dy₃ ? 0.33[Dy(NO₃)₆] shows only one activated process with U_eff=19.5 cm^?1.     

Iridium‐Based Cubic Nanocages with 1.1‐nm‐Thick Walls: A Highly Efficient and Durable Electrocatalyst for Water Oxidation in an Acidic Medium

We report a highly active and durable water oxidation electrocatalyst based on cubic nanocages with a composition of Ir₄₄Pd₁₀, together with well‐defined {100} facets and porous walls of roughly 1.1 nm in thickness. Such nanocages substantially outperform all the water oxidation electrocatalysts reported in literature, with an overpotential of only 226 mV for reaching 10 mA cm^?2_geo at a loading of Ir as low as 12.5 μg_Ir cm^?2 on the electrode in acidic media. When benchmarked against a commercial Ir/C electrocatalyst at 250 mV of overpotential, such a nanocage‐based catalyst not only shows enhancements (18.1‐ and 26.2‐fold, respectively) in terms of mass (1.99 A mg^?1_Ir) and specific (3.93 mA cm^?2_Ir) activities, but also greatly enhanced durability. The enhancements can be attributed to a combination of multiple merits, including a high utilization efficiency of Ir atoms and an open structure beneficial to the electrochemical oxidation of Ir to the active form of IrO_x.