A highly active FeNi3–SiO2 magnetic nanoparticles catalyst for the preparation of 4H-benzo[b]pyrans and Spirooxindoles under mild conditions

A green and efficient method for the synthesis of various 4H-benzo[b]pyrans and Spirooxindoles in the presence of FeNi₃–SiO₂ as the nanocatalyst at room temperature is reported. High catalytic activity and ease of recovery from the reaction mixture using an external magnet, and several reuse times without significant losses in performance are additional eco-friendly attributes of this catalytic system.     

SiO2-functionalized melamine-pyridine group–supported Cu(OAc)2 as an efficient heterogeneous and recyclable nanocatalyst for the N-arylation of amines through Ullmann coupling reactions

This study reports a convenient approach to prepare SiO₂/CCPy/Cu(OAc)₂ as a novel nanocatalyst, in which melamine-bearing pyridine groups have functionalized SiO₂ and can act as a capping agent to stabilize Cu(II) species. The catalyst is characterized through Fourier transform infrared, transmission electron microscopy, field emission scanning electron microscopy (FESEM), Brunauer–Emmett–Teller (BET), thermogravimetric analysis, inductivity coupled plasma (ICP), and energy dispersive X-ray (EDX) techniques. Furthermore, its catalytic behavior is evaluated in the N-arylation of indole, imidazole, and aniline during Ullmann-type C–N coupling reactions. Moreover, it has been proved that the heterogeneous nanocatalyst can be feasibly recovered by filtration and reused in five consecutive reaction cycles without any noticeable loss of its catalytic activity. The results clarified that the devised method is advantageous from several perspectives, that is, low catalyst loading, high product yield, experimental simplicity, broad substrate scope, and short reaction time.     

PbS nanoparticles stabilized on HPG-modified FeNi3 as catalyst for synthesis of 2-amino-4H-chromene under mild conditions

FeNi₃\SiO₂\HPG\PbS magnetic nanoparticles (MNPs) catalyst was readily prepared from inexpensive starting materials in aqueous media which catalyzed the synthesis 2-amino-4H-chromene via intermittent microwave irradiation. X-ray diffraction, transmission electron micrographs, and scanning electron micrographs were employed to characterize the properties of the synthesized FeNi₃\SiO₂\HPG\PbS MNPs. High catalytic activity and ease of recovery from the reaction mixture using external magnet and several reuse times without significant losses in performance are additional eco-friendly attributes of this catalytic system.     

One-pot synthesis of thiazole-2-imine derivatives by CoFe2O4@SiO2-PA-CC-Guanidine-SA MNPs as an efficient and recyclable catalyst

A novel and atom-economic protocol for the synthesis of thiazole-2-imine derivatives was developed. Synthesis of thiazole-2-imine derivatives from primary amines, phenyl isothiocyanate and phenacyl bromide derivatives by the CoFe₂O₄@SiO₂-PA-CC-Guanidine-SA magnetic nanocatalyst in excellent yields was reported. This nanocatalyst is easily separated from the reaction mixture and can be reused for several times. For the characterization of the catalyst used of Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and vibrating-sample magnetometry (VSM) techniques.     

Boehmite@SiO2@ Tris (hydroxymethyl)aminomethane-Cu(I): a novel,highly efficient and reusable nanocatalyst for the C-C bond formation and the synthesis of 5-substituted 1H-tetrazoles in green media

In this work, a versatile protocol was introduced for the preparation of a new Cu(I) supported complex on Silica supported boehmite nanoparticles (Boehmite@SiO₂@Tris-Cu(I)). The structure of the catalyst was comprehensively characterized using Fourier transform infrared spectroscopy (FT-IR), X-Ray Diffractometer (XRD), energy-dispersive X-ray spectroscopy (EDS), inductively coupled plasma atomic emission spectroscopy (ICP), X-ray mapping, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) techniques. The catalytic activity of this catalyst was studied in the Suzuki cross-coupling reaction and synthesis of 5-substituted 1H-tetrazole derivatives in ethanol and PEG-400 respectively as green solvents. In this sense, simple preparation of the catalyst from the commercially available materials, high catalytic activity, simple operation, short reaction times, high yields and use of green solvent are some advantages of this protocol. Finally, it is worth mentioning that this nanocatalyst was easily recovered, and reused for several times without significant loss of its catalytic efficiency. In addition, stability of the catalyst after recycling was confirmed by FT-IR technique.     

Diazabicyclo[2.2.2]octane stabilized on Fe3O4 as catalysts for synthesis of coumarin under solvent-free conditions

Fe₃O₄-diazabicyclo[2.2.2]octane (Fe₃O₄-DABCO) magnetic nanoparticles (MNPs) catalyst was readily prepared from inexpensive starting materials in aqueous media which catalyzed the synthesis of coumarin. FTIR spectroscopy, X-ray diffraction, transmission electron micrographs were employed to characterize the properties of the synthesized Fe₃O₄-DABCO MNPs. High catalytic activity and ease of recovery from the reaction mixture using external magnet, and several reuse times without significant losses in performance are additional eco-friendly attributes of this catalytic system.     

Application of novel and reusable Fe3O4@CoII(macrocyclic Schiff base ligand) for multicomponent reactions of highly substituted thiopyridine and 4H-chromene derivatives

In this research study we designed and synthesized Co^II(macrocyclic Schiff base ligand containing 1,4-diazepane) immobilized on Fe₃O₄ nanoparticles as a novel, recyclable, and heterogeneous catalyst. The nanomaterial was fully characterized using various techniques such as Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, energy-dispersiveX-ray spectroscopy, thermogravimetric analysis, vibrating sample magnetometry, differential reflectance spectroscopy, Brunauere–Emmette–Teller method, inductively coupled plasma, and elemental analysis (CHNS). Then, the catalytic performance was successfully investigated in the multicomponent synthesis of 2-amino-4-aryl-6-(phenylsulfanyl)pyridine-3,5-dicarbonitrile and 2-amino-5,10-dioxo-4-aryl-5,10-dihydro-4H-benzo[g]chromene-3-carbonitrile derivatives. Furthermore, the catalyst was isolated using a simple filtration, and recovery of the nanocatalyst was demonstrated five times without any loss of activity.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

β-Alanine-functionalized magnetic graphene oxide quantum dots: an efficient and recyclable heterogeneous basic catalyst for the synthesis of 1H-pyrazolo[1,2-b]phthalazine-5,10-dione and 2,3-dihydroquinazolin-4(1H)-one derivatives

In this research, we report a novel synthesis of magnetic β-alanine-functionalized-graphene oxide quantum dots Fe₃O₄@GOQDs-N-(β-alanine) as a recyclable and eco-friendly heterogeneous nanocatalyst. The catalytic efficiency of these nanosheets was explored as a basic catalyst for a one-pot three-component synthesis of various 1H-pyrazolo[1,2-b]phthalazine-5,10-dione and 2,3-dihydroquinazolin-4(1H)-one derivatives. The reactions proceeded smoothly under mild and green conditions to afford the respected products in excellent yields. The structure of this newly fabricated catalyst was successfully confirmed by different analytical techniques such as Fourier transform infrared spectroscopy, X-ray diffraction, field emission-scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, vibrating sample magnetometry, and thermogravimetric analysis. The stability and recyclability of the catalyst were examined by performing the model reaction in six consecutive runs. The recovered catalyst from the first run was directly used for the next runs with no significant loss of catalytic activity.     

(3‐Oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) functionalized magnetic γ‐Fe2O3 nanoparticles: A novel and heterogeneous nanocatalyst for one‐pot and efficient four‐component synthesis of novel spiro[indeno[1,2‐b]quinoxaline derivatives

The efficient synthesis of novel spiro[indeno[1,2‐b]quinoxaline derivatives via the four‐component condensation of amines, ninhydrin, isatoic anhydride, and о‐phenylenediamine derivatives catalyzed by ( 3‐oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) supported on γ‐Fe₂O₃ as novel heterogenous magnetic nanocatalyst was described. The novel nanocatalyst was characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), vibrating sample magnetometry (VSM), Field Emission Scanning Electron Microscopy (FE‐SEM), and thermal analysis (TGA‐DTG). The nanoparticles covered by (3‐oxo‐[1,2,4]triazolidin‐1‐yl)bis (butane‐1‐sulfonic acid) showed enhanced catalytic performance in the preparation of spiro[indeno[1,2‐b]quinoxaline derivatives in excellent yields. Moreover, this method showed several advantages such as mild conditions, high yields, easy work‐up, and being environmentally friendly. The catalyst can be easily separated from the reaction mixture by an external magnet, recycled, and reused several times without a noticeable decrease in catalytic activity.     

Fe3O4@SiO2@sulfated boric acid as superparamagnetic and recyclable nanocatalyst‐assisted,one‐pot,pseudo four‐component synthesis of 5‐amino‐2‐aryl‐3H‐chromeno[4,3,2‐de][1,6]naphthyridine‐4‐carbonitrile derivatives

The catalytic performance of the superparamagnetic nanocatalyst Fe₃O₄@SiO₂@Sulfated boric acid as a green, recyclable, and acidic solid catalyst in the synthesis of chromeno[4,3,2‐de][1,6]naphthyridine derivatives has been studied. Chromeno[4,3,2‐de][1,6]naphthyridine derivatives via a pseudo four‐component reaction from aromatic aldehydes (1 mmol), malononitrile (2 mmol), and 2′‐hydroxyacetophenone in the presence of Fe₃O₄@SiO₂@Sulfated boric acid (0.004 g) as a nanocatalyst in 3 mL of water as a green solvent at 80°C has been synthesized. The advantages of this method are higher product yields in shorter reaction times, easy recyclability and reusability of the catalyst, and easy work‐up procedures. The nanocatalyst was reused at least six times. The nanocatalyst retained its stability in the reaction, and after reusability, it was separated easily from the reaction by an external magnet.     

Preparation,characterization and use of new lignocellulose-based bio nanocomposite as a heterogeneous catalyst for sustainable synthesis of pyrimido benzazoles

A sustainable combinatorial synthesis of densely substituted pyrimido [1,2-b] benzazole derivatives in water under microwave irradiation was performed using a new lignocellulose-based bio nanocomposite (BNC) as heterogeneous catalyst. The lignocellulosic waste peanut shells (LCWPS) were turned into a value-added product, a new BNC PS/ZnO, which was prepared via in situ hydrothermal synthesis. The as-prepared BNC was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction spectrum. PS/ZnO has been successfully used in a sustainable catalytic method for the synthesis of pyrimido [1, 2-b] benzazole derivatives in water under microwave irradiation. The time of this reaction was significantly reduced. This catalytic system has a very high turnover number (TON?～?10³) and turnover frequency (TOF?～?10^5?h^?1). This paper presents the benefit of sustainable management of LCWPS, a bio-sourced polymeric carbohydrate for production of new nanocatalyst.     

Spirooxindole-fused pyrazolo pyridine derivatives: NiO–SiO2 catalyzed one-pot synthesis and antimicrobial activities

We describe here a one-pot synthesis of 13 spirooxindole-fused pyrazolo pyridine derivatives using NiO–SiO₂ catalyst via three-component reaction of isatin, 5-amino-3-methylpyrazole, and malononitrile. This multicomponent one-pot protocol also features shorter reaction time, good yield, and simple work-up using a recoverable and reusable solid acid heterogeneous catalyst. The NiO–SiO₂ catalyst was characterized using different instrumental techniques such as X-ray diffraction study, surface area analysis, transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, UV-DRS (diffuse reflectance spectroscopy), and energy dispersive X-ray analysis (EDX). The new compounds were tested for in-vitro anti-microbial activity.     

Magnetic carbon nanotube as a highly stable support for the heterogenization of InCl3 and its application in the synthesis of isochromeno[4,3-c]pyrazole-5(1H)-one derivatives

In the present study, a novel magnetically retrievable catalytic system involving indium nanoparticles on magnetic carbon nanotube (Fe₃O₄-CNT-In) was synthesized and characterized using various techniques, such as Fourier transform-infrared, thermogravimetric analysis, energy-dispersive X-ray analysis, vibrating-sample magnetometry1, X-ray diffraction, field emission-scanning electron microscopy and inductively coupled plasma-optical emission spectrometry. The catalytic activity of the synthesized nanocatalyst was evaluated in green synthesis of isochromeno[4,3-c]pyrazole-5(1H)-one derivatives from the reaction of ninhydrin and arylhydrazones under solvent-free conditions. The catalyst was magnetically separated from the reaction mixture using an external magnet and recovered for five cycles without an appreciable decrease in its catalytic efficiency. Performing the reactions in environmentally friendly and affordable conditions, the low catalyst percentage, high yield of products, short reaction times, large substrate scope and easy work-up are the merits of this protocol. Furthermore, four of the synthesized isochromeno[4,3-c]pyrazole-5(1H)-one derivatives are also new.     

Effective one-pot synthesis of tetrahydrobenzo[b]pyran derivatives using nickel Schiff-base complex immobilized on iron oxide nanoparticles

Nickel Schiff-base complex immobilized on silica-coated Fe₃O₄ as a heterogeneous catalyst was designed and characterized by different techniques, such as Fourier transform infrared (FT-IR), X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), inductively coupled plasma (ICP) and vibrating sample magnetometry (VSM) thermogravimetric analysis (TGA), and Brunauer–Emmett–Teller (BET). The synthesized nanocatalyst has been explored as a new and efficient recyclable heterogeneous catalyst for the one-pot three-component synthesis of tetrahydrobenzo[b]pyran derivatives. The reaction proceeds smoothly to supply the respective products in excellent yields and low reaction times. The catalyst can be easily recovered by a magnetic field and reused for eight consecutive reaction cycles without significant loss of activity.     

Cu@KCC-1-NH-CS2 as a new and highly efficient nanocatalyst for the synthesis of 2-amino-4H-chromene derivatives

In the present work, Cu@KCC-1-NH-CS₂ as a green, efficient, and reusable nano-reactor was designed and used for the one-pot, three-component synthesis of 2-amino-4H-chromene derivatives using the reaction of cyclic 1,3-diketones, arylglyoxals, and malononitrile, under reflux conditions in EtOH. Engineered nanocatalyst characterized using different methods including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), adsorption/desorption analysis (BET), and energy dispersive X-ray spectroscopy (EDS). According to the obtained results, presented protocol for the synthesis of 2-amino-4H-chromenes using Cu@KCC-1-NH-CS₂ gave the desired products in higher yields (89–98%) with short reaction times. Also, under mild reaction conditions this green nanocatalyst indicated recyclable behavior five times with minor reduce in its catalytic activity.     

Synthesis,characterization and application of Fe3O4@SiO2@CPTMO@DEA-SO3H nanoparticles supported on bentonite nanoclay as a magnetic catalyst for the synthesis of 1,4-dihydropyrano[2,3-c]pyrazoles

Fe₃O₄ nanoparticles were prepared and decorated on the surface of nanobentonite (NB), and subsequently modified by the organic and inorganic linkers and then sulfonic acid immobilization on the nanoparticles. The NB-Fe₃O₄@SiO₂@CPTMO@DEA-SO₃H catalyst was characterized via Fourier transform-infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, vibrating-sample magnetometer, X-ray diffraction patterns, Brunauer–Emmett–Teller and thermal gravimetric analysis. The new catalyst benefits from a simple preparation method, and environmentally friendly and high magnetic properties of the nanocatalyst, Accordingly, we used it for the synthesis of dihydropyrano[2,3c]pyrazole derivatives in water and ethanol mixture as a green solvent under reflux conditions. Use of mild conditions, easy catalyst separation, cost-effectiveness, short reaction time, reusability of the catalyst, excellent yield and easy work-up are the main advantages of the present method.     

Polyaniline/SiO2 Nanocomposite Catalyzed Efficient Synthesis of Quinoxaline Derivatives at Room Temperature

Polyaniline/SiO₂ nanocomposite material has been synthesized by using chemical oxidative method. Prepared catalytic material was characterized by means of transmission electron microscopy (TEM), thermal analysis (TG‐DTA), X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and Fourier transform infrared spectroscopy (FT‐IR). Solvent stability for the catalyst has been screened using UV‐Visible spectroscopy. Polyaniline/SiO₂ catalyzed route has found to be an efficient and rapid protocol for the synthesis of quinoxaline derivatives by cyclocondensation of 1,2‐diketones and o‐phenylenediamines at room temperature. This protocol has several advantages such as high yield, good thermal stability, simple work up procedure, non‐toxic, clean, and easy recovery and reusability of the catalytic system.     

Immobilization of copper nanoparticles on WO3 with enhanced catalytic activity for the synthesis of 1,2,3-triazoles

In this study, a heterogeneous catalyst based on copper nanoparticles immobilized on metal oxide, WO₃, was fabricated using an impregnation method as an easy and straightforward nanoparticle synthesis strategy. The successful synthesis of the nanocatalyst was confirmed using various spectroscopic techniques such as X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, and transmission electron microscopy. The catalytic performance of the well-characterized material was evaluated through the azide–alkyne cycloaddition reaction (click reaction) in the aqueous medium. To optimize reaction conditions, different reaction parameters such as nanocatalyst amount, reaction time, temperature, and solvents were studied. Experimental results showed that as-prepared nanocatalyst (Cu/WO₃) could act as an effective and reusable heterogeneous catalyst in water for the synthesis of 1,2,3-triazoles in good-to-excellent yields. In addition, Cu/WO₃ has some advantages such as simple preparation procedure, easy separation, and recyclability for three runs with no remarkable loss of catalytic activity, which is essential from a catalytic application point of view.     

Fe3O4@vitamin B1 as a sustainable superparamagnetic heterogeneous nanocatalyst promoting green synthesis of trisubstituted 1,3‐thiazole derivatives

Fe₃O₄@vitamin B₁ was designed and prepared as an inexpensive and efficient heterogeneous nanocatalyst for the synthesis of new 1,3‐thiazol derivatives. The structure of the nanomagnetic catalyst was comprehensively characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry and thermogravimetric analysis. The three‐component, one‐pot condensation of arylglyoxal monohydrate, cyclic 1,3‐dicarbonyls and thioamides in water as a green solvent was applied for the preparation of 1,3‐thiazol derivatives. Simple preparation of the catalyst from commercially available materials, high catalytic activity, simple operation, short reaction times, high yields and use of green solvent are some advantages of this protocol. The superparamagnetic nanocatalyst is magnetically separable and retains its stability after recycling for at least five consecutive runs without detectable activity loss.