Novel methodology for the study of mercury methylation and reduction in sediments and water using <Superscript>197</Superscript>Hg radiotracer

Mercury tracers are powerful tools that can be used to study mercury transformations in environmental systems, particularly mercury methylation, demethylation and reduction in sediments and water. However, mercury transformation studies using tracers can be subject to error, especially when used to assess methylation potential. The organic mercury extracted can be as low as 0.01% of the endogenous labeled mercury, and artefacts and contamination present during methylmercury (MeHg) extraction processes can cause interference. Solvent extraction methods based on the use of either KBr/H₂SO₄ or HCl were evaluated in freshwater sediments using ¹⁹⁷Hg radiotracer. Values obtained for the ¹⁹⁷Hg tracer in the organic phase were up to 25-fold higher when HCl was used, which is due to the coextraction of ¹⁹⁷Hg²⁺ into the organic phase during MeHg extraction. Evaluations of the production of MeHg gave similar results with both MeHg extraction procedures, but due to the higher Hg²⁺ contamination of the controls, the uncertainty in the determination was higher when HCl was used. The Hg²⁺ contamination of controls in the HCl extraction method showed a nonlinear correlation with the humic acid content of sediment pore water. Therefore, use of the KBr/H₂SO₄ method is recommended, since it is free from these interferences. ¹⁹⁷Hg radiotracer (T _1/2 = 2.673 d) has a production rate that is about 50 times higher than that of ²⁰³Hg (T _1/2 = 46.595 d), the most frequently used mercury radiotracer. Hence it is possible to obtain a similar level of performance to ²⁰³Hg when it is used it in short-term experiments and produced by the irradiation of ¹⁹⁶Hg with thermal neutrons, using mercury targets with the natural isotopic composition. However, if the 0.15% natural abundance of the ¹⁹⁶Hg isotope is increased, the specific activity of the ¹⁹⁷Hg tracer can be significantly improved. In the present work, ¹⁹⁷Hg tracer was produced from mercury 51.58% enriched in the ¹⁹⁶Hg isotope, and a 340-fold increase in specific activity with respect to natural mercury targets was obtained. When this high specific activity tracer is employed, mercury methylation and reduction experiments with minimum mercury additions are feasible. Tracer recovery in methylation experiments (associated with Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spike, but also with Hg²⁺ contamination and Me¹⁹⁷Hg artefacts) with marine sediments was about 0.005% g⁻¹ WS (WS: wet sediment) after 20 h incubation with mercury additions of 0.05 ng g⁻¹ WS, which is far below natural mercury levels. In this case, the amount of Hg²⁺ reduced to Hg⁰ (expressed as the percent ¹⁹⁷Hg⁰ recovered with respect to the ¹⁹⁷Hg²⁺ added) varied from 0.13 to 1.6% g⁻¹ WS. Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spike after 20 h of incubation of freshwater sediment ranged from 0.02 to 0.13% g⁻¹ WS with mercury additions of 2.5 ng g⁻¹ WS, which is also far below natural levels. ¹⁹⁷Hg⁰ recoveries were low, 0.0058 ± 0.0013% g⁻¹ WS, but showed good reproducibility in five replicates. Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spiked in freshwater samples ranged from 0.1 to 0.3% over a period of three days with mercury additions of 10 ng L⁻¹. A detection limit of 0.05% for Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spike was obtained in seawater in a 25 h incubation experiment with mercury additions of 12 ng L⁻¹.     

Effects of La<Superscript>3+</Superscript> and Eu<Superscript>3+</Superscript> on outward potassium channels in Vicia guard cells

Effects of La³⁺ and Eu³⁺ on outward potassium channels (K_out⁺) in Vicia guard cells have been studied by patch clamping technique. Extracellular La³⁺ inhibited K_out⁺ currents with a half-inhibition concentration (IC₅₀) of 81 μmol·L⁻¹. Interestingly, intracellular La³⁺ activated K_out⁺ currents at a free concentration of 1.13 × 10⁻¹⁴ mol·L⁻¹, and inhibited K_out⁺ currents at a free concentration of 5.86 × 10⁻¹⁴ mol·L⁻¹. Extracellular Eu³⁺ also activated K_out⁺ currents at concentrations of 10 μmol·L⁻¹ and 50 μmol·L⁻¹, and inhibited K_out⁺ currents at concentrations of more than 1 mmol·L⁻¹. The effects of La³⁺ and Eu³⁺ on K_out⁺ currents may contribute to regulation of the plant water status, which may be one of the mechanisms of the biological effect of rare earth elements.     

An optical chemical sensor for mercury ion based on 2-mercaptopyrimidine in PVC membrane

An optical chemical sensor based on 2-mercaptopyrimidine (2-MP) in plasticized poly(vinyl chloride) (PVC) membrane incorporating (N,N-diethyl-5-(octadecanoylimino)-5H benzo[a]phenoxazine-9-amine (ETH 5294) and sodium tetraphenyl borate (NaTPB) for batch and flow-through determination of mercury ion is described. The response of the sensor is based on selective complexation of Hg²⁺ with 2-MP in the membrane phase, resulting in an ion exchange process between H⁺ in the membrane and Hg²⁺ in the sample solution. The influences of several experimental parameters, such as membrane composition, pH, and type and concentration of the regenerating reagent, were investigated. The sensor has a response range of 2.0 × 10⁻⁹ to 2.0 × 10⁻⁵ mol L⁻¹ Hg²⁺ with a detection limit of 4.0 × 10⁻¹⁰ mol L⁻¹ and a response time of ≤45 s at optimum pH of 6.5 with high measurement repeatability and sensor-to-sensor reproducibility. It shows high selectivity for Hg²⁺ over several transition metal ions, including Ag⁺, Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, and common alkali and alkaline earth ions such as Na⁺, K⁺, Mg²⁺, Ca²⁺, and Pb²⁺. The sensor membrane can be easily regenerated with dilute acid solutions. The sensor has been used for the determination of mercury ion concentration in water samples.     

From a Tb<Superscript>3+</Superscript> chelated compound to a hybrid material: selective emission responses to anions

A novel terbium 2-hydroxymethyl-benzoimidazole-6-carboxylic acid complex has been designed and unique emission changes to fluoride anions in comparison with HSO₄⁻, AcO⁻, Cl⁻, Br⁻, and I⁻ were observed. Then, the complex was encapsulated into an inorganic matrix. The novel hybrid material, with strong green emission was successfully synthesized as an anions receptor in water. More importantly, this hybrid material not only gave luminescence response to F⁻, but also to HSO₄⁻. Spectroscopic studies demonstrated that the recognition process for fluoride ions can be mainly ascribed to its hydrogen bonding interactions with hydrogen bond donor units (NH and OH). In case of hydrogen sulfate, the sensing effects can be probably attributed to its acidity instead of hydrogen bonding interactions.     

A chelating resin with bis[2-(2-benzothiazolylthioethyl)sulfoxide]: Synthesis, characterization and properties for the removal of trace heavy metal ion in water samples

A new chelating resin containing bis[2-(2-benzothiazolylthioethyl)sulfoxide] was synthesized using chloromethylated polystyrene as material and characterized by elemental analysis and infrared spectra. The adsorption capacities of the newly formed resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were investigated over the pH range 1.0-6.0. The resin exhibited no affinity for alkali or alkaline earth metal ions. The maximum adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were 1.49, 0.96, 0.58, 0.11, 0.37, 0, 0.24, 0.36 and 0.25 mmol g⁻¹, respectively. In column operation it had been observed that Hg²⁺ and Ag⁺ in trace quantity could be separated from different binary mixtures and Hg²⁺ could be effectively removed from industrial wastewater and the natural water spiked with Hg²⁺ at usual pH.     

Determination of alkali, alkaline earth and transition metal ions in UO2, ThO2 powders and sintered (Th,U)O2 pellets by ion chromatography

An ion chromatographic method has been developed for the determination of traces of Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, Sr²⁺, Fe³⁺, Cu²⁺, Ni^2+, Co²⁺, Zn²⁺, Cd²⁺, Mn²⁺ in UO₂, ThO₂ powders and sintered (Th,U)O₂ pellets. This new method utilizes poly-(butadiene-maleic acid) (PBDMA) coated silica cation exchange column and mixed functionality column of anion and cation exchange to achieve the separation of alkali, alkaline earths and transition metal ions, respectively. It involves matrix separation after sample dissolution by solvent extraction with TBP (tri butyl phosphate)-TOPO (tri octyl phosphine oxide)/CCl₄. Interference of transition metal ions in the determination of alkali, alkaline earth metal ions are removed by using pyridine 2,6-dicarboxylic acid (PDCA) in the tartaric acid mobile phase. Mobile phase composition is optimized for the base line separation of alkali, alkaline earth and transition metal ions. Linear calibration graphs in the range 0.01–20 μg mL⁻¹ were obtained with regression coefficients better than 0.999. The respective relative standard deviations were also determined. Recoveries of the spiked samples are within ±10% of the expected value. The developed method is authenticated by comparison with certified standards of UO₂ and ThO₂ powders.     

Sorption behavior of Am<Superscript>3+</Superscript> on suspended pyrite

Sorption behavior of ²⁴¹Am (~10⁻⁹ M) on naturally occurring mineral pyrite (particle size: ≤70 μm) has been studied under varying conditions of pH (2–11), and ionic strength (0.01–1.0 M (NaClO₄)). The effects of humic acid (2 mg/L), other complexing anions (1 × 10⁻⁴ M CO₃ ²⁻, SO₄ ²⁻, C₂O₄ ²⁻ and PO₄ ³⁻), di- and trivalent metal ions (1 × 10⁻³ M Mg²⁺, Ca²⁺ and Nd³⁺) on sorption behavior of Am³⁺ at a fixed ionic strength (I = 0.10 M (NaClO₄)) have been studied. The sorption of ²⁴¹Am on pyrite increased with pH from 2.8 (84%) to 8.1 (97%). The sorption of ²⁴¹Am decreased with ionic strength at low pH values (2 ≤ pH ≤ 4), but was insensitive in the pH range of 4–10, suggesting the formation of outer-sphere complexes on pyrite surface at lower pH, and inner-sphere complexes at higher pH values. The sorption of ²⁴¹Am increased in the presence of (i) humic acid (5 < pH < 7.5), and (ii) C₂O₄ ²⁻ (2 < pH < 3). By contrast, other complexing anions such as (carbonate, phosphate, and sulphate) showed negligible influence on ²⁴¹Am sorption. The presence of Mg²⁺, Ca²⁺ ions showed marginal effect on the sorption profile of ²⁴¹Am; while the presence of Nd³⁺ ion suppressed its sorption significantly under the conditions of present study. The sorption of ²⁴¹Am on pyrite decreased with increased temperature indicating an exothermic process.     

Molecular modeling of hydration properties of hydrophobic ions Li<Superscript>+</Superscript>@C<Subscript>60</Subscript> and K<Superscript>+</Superscript>@C<Subscript>60</Subscript>

The Gibbs free energies of solvation (ΔG _s) and the electronic structures of endohedral metallofullerenes M⁺@C₆₀ (M⁺= Li⁺, K⁺) were calculated within the framework of the density functional theory and the polarizable continuum model. In water environment, the equilibrium position of K⁺ is at the center of the fullerene cavity whereas that of Li⁺ is shifted by 0.14 nm toward the fullerene cage. The Li⁺ cation is stabilized by interactions with both the fullerene and solvent. The equilibrium structures of both endohedral metallofullerenes are characterized by very close ΔG _s values. In particular, the calculated ΔG _s values for K⁺@C₆₀ are in the range from −124 to −149 kJ mol⁻¹ depending on the basis set and on the type of the density functional. Molecular dynamics simulations (TIP3P H₂O, OPLS force field, water sphere of radius 1.9 nm) showed that the radial distribution functions of water density around C₆₀ and M⁺@C₆₀ are very similar, whereas orientations of water dipoles around the endohedral metallofullerenes resemble the hydration pattern of isolated metal ions.     

Mercury-selective membrane electrode based on methyl substituted dibenzo tetraphenyl tetraaza macrocycle

A new polystyrene based membrane electrode of methyl substituted 6,7:13,14-dibenzo-2,4,9,11-tetraphenyl-1,5,8,12-tetraazacyclotetradeca-1,4,6,8,11,13-hexaene (I) with sodium tetraphenylborate (NaTPB) and dibutyl phthalate (DBP) as anion excluder and plasticizing agent was prepared and investigated as Hg (II)-selective electrode. The electrode exhibits a Nernstian response for Hg (II) ions over a wide concentration range of 1.0 × 10⁻¹–8.9 × 10⁻⁶ M with a slope of 30 ± 1 mV per decade concentration. It has a response time of 10 s and can be used for at least 4 months without any divergence in potentials. The membrane works satisfactorily in a partially non-aqueous medium up to a maximum 30% (v/v) content of methanol and ethanol. The proposed sensor revealed good selectivity over a wide variety of other cations including alkali, alkaline earth, heavy and transition metal ions and could be used in a pH range of 2.5–5.0. Normal interferents like Ag⁺, Cd²⁺ and Pb²⁺ low interfere in the working of the electrode. The electrode was successfully used in the direct determination of Hg²⁺ in aqueous solution.     

Effects of La<Superscript>3+</Superscript> on inward K<Superscript>+</Superscript> channels at plasma membrane in guard cells

The effects of La³⁺ on inward K⁺ channels at plasma membrane in vicia guard cells are investigated using the whole-cell patch-clamp recording mode. It is shown that La³⁺ on both sides of plasma membrane blocks inward K⁺ currents in a concentration-dependent manner, indicating that La³⁺ binding sites may exist on both sides of plasma membrane in guard cells in vicia. The dose response is fitted by the Michaelis-Menten relation characterized by an inhibitor constant K _i of 2.56±0.25 μmol · L⁻¹ (outside membrane) and (1.18±0.11)×10⁻¹⁵ mol · L⁻¹ (inside membrane). Intracellular La³⁺ has much stronger inhibitory effect on inward K⁺ currents than extracellular La³⁺ does, suggesting there may exist stronger binding sites inside membrane than outside membrane. Since ion channel activities of guard cells directly affect plant stomatal movement and water status, our results imply that rare earth elements might have potential practical values in regulating plant water status and strengthening plant drought endurance.     

Ion-exchange selectivity of a network calixarene-containing polymer obtained by the template synthesis on Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, and Ba<Superscript>2+</Superscript> matrices

The ion-exchange equilibrium in network polymers obtained from cis-2,8,14,20-tetraphenyl-4,6,10,12,16,18,22,24-octahydroxycalix[4]arene by template synthesis on cations Na⁺, K⁺, and Ba²⁺ as matrices was studied. The selectivity coefficients of ion exchanges Ba²⁺-H⁺, Na⁺-H⁺, K⁺-H⁺, Na⁺-K⁺, and Na⁺-NH₄ ⁺ were determined. The template synthesis enhanced the affinity of the polymers to matrix-forming cations by 6–8 kJ mol⁻¹. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1919–1922, August, 2005.     

Solubility and hydrolysis of lutetium at different [Lu<Superscript>3+</Superscript>]<Subscript>initial</Subscript>

Solubility product (Lu(OH)_3(s)⇆Lu³⁺+3OH⁻) and first hydrolysis (Lu³⁺+H₂O⇆Lu(OH)²⁺+H⁺) constants were determined for an initial lutetium concentration range from 3.72·10⁻⁵ mol·dm⁻³ to 2.09·10⁻³ mol·dm⁻³. Measurements were made in 2 mol·dm⁻³ NaClO₄ ionic strength, under CO₂-free conditions and temperature was controlled at 303 K. Solubility diagrams (pLu_aq vs. pC _H) were determined by means of a radiochemical method using ¹⁷⁷Lu. The pC _H for the beginning of precipitation and solubility product constant were determined from these diagrams and both the first hydrolysis and solubility product constants were calculated by fitting the diagrams to the solubility equation. The pC _H values of precipitation increases inversely to [Lu³⁺]_initial and the values for the first hydrolysis and solubility product constants were log₁₀ β* _Lu,H = −7.92±0.07 and log₁₀ K*_sp,Lu(OH)3 = −23.37±0.14. Individual solubility values for pC _H range between the beginning of precipitation and 8.5 were S _Lu3+ = 3.5·10⁻⁷ mol·dm⁻³, S _Lu(OH)2+ = 6.2·10⁻⁷ mol·dm⁻³, and then total solubility was 9.7·10⁻⁷ mol·dm⁻³.     

Thermodynamic behavior of complexation of 18-crown-6 with Tl<Superscript>+</Superscript>, Pb<Superscript>2+</Superscript>, Hg<Superscript>2+</Superscript>, and Zn<Superscript>2+</Superscript> metal cations in methanol-water binary media

The equilibrium constants and thermodynamic parameters for complex formation of 18-Crown-6 (18C6) with Tl⁺, Pb²⁺, Hg²⁺, and Zn²⁺ metal cations have been determined by conductivity measurements in methanol (MeOH)-water (H₂O) binary solutions. 18-Crown-6 forms 1:1 complexes with Hg²⁺ and Zn²⁺ cations, but in the case of Tl⁺ and Pb²⁺ cations, in addition to 1:1 stoichiometry, 1:2 (ML₂) complexes are formed in some binary solvents. The thermodynamic parameters (ΔH _c⁰ and ΔS _c⁰), which were obtained from the temperature dependences of equilibrium constants, show that in most cases the complexes are enthalpy destabilized but entropy stabilized. Non-linear behavior is observed between the equilibrium constants (log K _f ) of complexes and the composition of the mixed solvent. The selectivity of the ligand for these metal cations is sensitive to the solvent composition, and, in some cases, the selectivity order is reversed in certain compositions of the mixed solvent. The results also show that the mechanism of complexation reactions and the stoichiometry of complexes of some metal cations change with the nature and even with the composition of the mixed solvent. The article was submitted by the authors in English.     

Sensitive electrochemical DNA-based biosensors for the determination of Ag<Superscript>+</Superscript> and Hg<Superscript>2+</Superscript> ions and their application in analysis of amalgam filling

In the present paper, we used single-stranded poly-T (100% thymine bases) and poly-C (100% cytosine bases) nucleic acids as DNA probes for selective and sensitive individual electrochemical determination of Hg²⁺ and Ag⁺_, respectively, on the multi-walled carbon nanotube paste electrodes (MWCNTPEs) using [Fe(CN)₆]^3?/4? as electroactive labels. In the presence of Hg²⁺ and Ag⁺, the probe–Hg²⁺/Ag⁺ interactions through T–Hg²⁺–T and C–Ag⁺–C complexes formation could cause the formation of a unimolecular hybridized probe. This structure of probe led to its partial depletion from electrode surface and facilitation of electron transfer between [Fe(CN)₆]^3?/4? redox couple and electrode surface, resulting in the enhanced differential pulse voltammetry (DPV) oxidation current of [Fe(CN)₆]^3?/4? at the probe-modified electrode surface. We applied the difference in the oxidation peak currents of [Fe(CN)₆]^3?/4? before and after Hg²⁺/Ag⁺–DNA probe bonding (?I) for electrochemical determination of these heavy metal ions. Detection limits were 8.0?×?10^?12 M and 1.0?×?10^?11 M for Hg²⁺ and Ag⁺ ions determination, respectively. The biosensors were utilized to determine the weight percent of toxic metals, i.e., silver and mercury in dental amalgam filling composition. The results of their practical applicability in analysis of the amalgam sample were satisfactory.     

Hydration numbers of Na<Superscript>+</Superscript> and Cl<Superscript>−</Superscript> ions in an aqueous urea solution

The relations for the calculation of the partial molar volumes of NaCl, NaBPh₄, and Ph₄AsCl in an aqueous urea solution are obtained. The salt characteristics are divided into ionic components. Different methods of the division are discussed. It is shown that the hydration numbers of Na⁺ and Cl⁻ ions decrease with increasing urea concentration; therewith, the dehydration of Cl⁻ ion occurs relatively faster.     

Photo- and ionochromic indoline spiropyrans based on 7,8-dihydroxy-4-methyl-2-oxo-2<Emphasis Type="Italic">H</Emphasis>-chromene-6-carbaldehyde

A number of indoline spiropyrans were synthesized from 7,8-dihydroxy-4-methyl-2-oxo-2H-chromene-6-carbaldehyde. The products were found to exhibit both photochromic and ionochromic properties. According to the UV, IR, and ¹H NMR spectral data, they exist in the spiro form. Irradiation at λ 365 nm in 2-methylbutane-propan-2-ol (4:1) at 203 K induces their isomerization into colored merocyanine structure. Addition of alkaline earth and transition metal salts to acetonitrile solutions of these compounds at room temperature changes the isomer ratio and leads to formation of merocyanine complexes characterized by different colors, so that visual detection of Zn²⁺, Mg²⁺, Hg²⁺, and Pb²⁺ ions is possible.     

Study on physicochemical properties of U<Superscript>3+</Superscript> in LiCl–KCl eutectic media at 773 K

In order to enhance the efficiency of pyrochemical technology, especially electrorefining process, physicochemical data of trivalent uranium in LiCl–KCl eutectic at 773 K were measured, including molar absorptivity, formal potential and diffusion coefficient of U³⁺ ions. The molar absorptivities of U³⁺ were determined to be 765 ± 48 and 686 ± 39 M⁻¹ cm⁻¹ at 465 and 550 nm, respectively. The formal potential of U³⁺/U⁴⁺ redox couple and diffusion coefficient of U³⁺ ions were measured to be −0.308 V vs. Ag/Ag⁺ and 8.7 × 10⁻⁶ M⁻¹ cm⁻¹, respectively. To elucidate the chemical behavior of U³⁺ ions under the existence of oxide ions, U³⁺ ions were reacted with oxides ions in situ produced at the LiCl–KCl media. Surprisingly, it was revealed from XRD patterns that UO₂ was formed from the reaction between U³⁺ ions and O²⁻ ions with the molar ratio of 1:1.     

Gas phase structure of micro-hydrated [Mn(ClO<Subscript>4</Subscript>)]<Superscript>+</Superscript> and [Mn<Subscript>2</Subscript>(ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> ions probed by infrared spectroscopy

Gas-phase infrared photodissociation spectroscopy is reported for the microsolvated [Mn(ClO₄)(H₂O) _n ]⁺ and [Mn₂(ClO₄)₃(H₂O) _n ]⁺ complexes from n = 2 to 5. Electrosprayed ions are isolated in an ion-trap where they are photodissociated. The 2600–3800 cm⁻¹ spectral region associated with the OH stretching mode is scanned with a relatively low-power infrared table-top laser, which is used in combination with a CO₂ laser to enhance the photofragmentation yield of these strongly bound ions. Hydrogen bonding is evidenced by a relatively broad band red-shifted from the free OH region. Band assignment based on quantum chemical calculations suggest that there is formation of water—perchlorate hydrogen bond within the first coordination shell of high-spin Mn(II). Although the observed spectral features are also compatible with the formation of structures with double-acceptor water in the second shell, these structures are found relatively high in energy compared with structures with all water directly bound to manganese. Using the highly intense IR beam of the free electron laser CLIO in the 800–1700 cm⁻¹, we were also able to characterize the coordination mode (η²) of perchlorate for two clusters. The comparison of experimental and calculated spectra suggests that the perchlorate Cl—O stretches are unexpectedly underestimated at the B3LYP level, while they are correctly described at the MP2 level allowing for spectral assignment.     

Crystal structure of Li(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>[GaEdta]

The ethylenediaminetetraacetate complex Li(H₂O)₃[Ga(Edta)] was synthesized and its crystal structure composed of octahedral (Ga(Edta)⁻ anions connected to the Li(H₂O)₃⁺ ion through the oxygen atom was studied. Five of the six hydrogen atoms of water molecules are involved in weak hydrogen bonds with the oxygen atoms of four Ga(Edta)⁻ complexes, the complex anion is hydrogen-bonded to five water molecules. In addition, shortened contacts C(221)–H(22A)…O(112) between the Ga(Edta)⁻ anions were found. As a result, the molecular packing in the crystal is determined by the three-dimensional lace of hydrogen bonds. The results are compared with published data for the lithium salts of Bi(III), Sb(III), Fe(III), Ni(II), and Hg(II) ethylenediaminetetraacetates.     

Scalar-relativistic 5f-in-core pseudopotentials and core-polarization potentials for trivalent actinides: calibration calculations for Ac<Superscript>3+</Superscript>, Cm<Superscript>3+</Superscript> and Lr<Superscript>3+</Superscript> complexes

The performance of recently proposed 5f-in-core pseudopotentials for the trivalent actinides was investigated in calculations for model complexes An³⁺L ⁿ⁻ for three selected actinides (An³⁺ = Ac³⁺, Cm³⁺, Lr³⁺) and eight simple ligands with atoms from the first three periods of the table of elements (L ⁿ⁻ = F⁻, Cl⁻, OH⁻, SH⁻, CO, NH₂⁻, H₂O, H₂S, NH₃). Results of Hartree-Fock and Coupled Cluster with singles, doubles and perturbative triples calculations using basis sets of quadruple-zeta quality are compared to corresponding reference data obtained with scalar-relativistic energy-adjusted 5f-in-valence small-core pseudopotentials. The inclusion of core-polarization potentials in the 5f-in-core pseudopotential calculations and corrections of the basis set superposition error by the counterpoise correction leads to very good agreement between the 5f-in-valence and 5f-in-core pseudopotential results for bond lengths, bond angles and binding energies. Results from 5f-in-core pseudopotential calculations using different density functionals also show reasonable agreement with the more rigorous Coupled Cluster results. It is argued that the An 5f rather than the An f population is a useful criterion for the applicability of a specific An 5f-in-core pseudopotential.