A new method of one-pot synthesis of dicarboxylic acid derivatives and diketones containing quaternary carbon atom and remote functional groups from linear acyl halides

The one-pot, regioselective synthesis of branched diacid derivatives – diesters, dithioesters, diamides [YC(O)O(CH₂)_mC(Me)₂OC(O)Y] and diketones of aromatic and heteroaromatic series, [ArCO(CH₂)_mC(Me)₂C(O)Ar,) from available linear acyl halides, C_nH_2 n+1COCl (n = 7–9), CO (1 at) and various nucleophiles (YH = EtOH, CF₃CH₂OH, H(CF₂)₂CH₂OH, thiophene, anisole, Et₂NH, aniline, and morpholine) in the presence of the superelectrophilic complex, CBr₄·2AlBr₃ has been performed for the first time. This method provides access to new and promising groups of dicarboxylic acid derivatives and diketones containing quaternary carbon atom and remote functional groups.     

Isonitrile ligand properties as studied by He I/He II photoelectron spectroscopy

A new series of isonitrile-substituted cobalt tricarbonyl nitrosyl (Co(CO)₂(NO)CNR, R = Me, Et, ⁿPr, ⁱPr, ⁿBu, ⁿPe, CH₂Si(CH₃)₃) has been synthesized, and their He I ultraviolet photoelectron spectra are reported. The assignment of the bands in the low energy part of the spectra was performed with the aid of DFT calculations. The first vertical ionization energies of the complexes were found to be 7.73 (CNMe), 7.58 (CNEt), 7.59 (CNⁿPr), 7.70 (CNⁿBu), 7.67 (CNⁿPe), 7.77 (CNⁱPr), and 7.54 ± 0.03 eV (CNCH₂Si(CH₃)₃). In the case of ⁿPr- and CH₂Si(CH₃)₃- substitutions, He II photoelectron spectra were also recorded. The relative importance of electronic and steric effects of the isonitrile ligands, as a function of the size of group –R, is discussed.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Catalytic dehydrocoupling of thienyl/furyl-substituted carbosilanes – Synthesis and characterization of functional poly(hydrosilane)s [RMe2Si(CH2)xSiH]n, (R = 2-Th, 4-Me-2-Th, 2-Fu, 5-Me-2-Fu; x = 2 and 3)

The carbosilanes RMe₂Si(CH₂)_xSiH₃, [R = 2-Th (1a, 2a), 4-Me-2-Th (3a, 4a), 2-Fu (5a, 6a), 5-Me-2-Fu (7a, 8a); x = 2 and 3], with primary SiH₃ end groups undergo a facile dehydropolymerization under ambient conditions (50 °C, 48 h) in presence of Cp₂TiCl₂/2.2 n-BuLi catalyst to afford the corresponding poly(hydrosilane)s 1–8 bearing carbosilyl side chains appended with thienyl/furyl groups. These have been characterized by GPC, IR, multinuclear (¹H, ¹³C{¹H}, ²⁹Si{¹H}) NMR, UV and PL spectral studies.     

Thermodynamics of the nickel and cobalt removal from aqueous solution by layered crystalline organofunctionalized barium phosphate

The available hydroxyl groups inside the lamellar cavity of barium phosphate (BaP) reacted with the silylating agents (RO)₃Si(CH₂)₃L_x (L₁ = NH₂, L₂ = NH(CH₂)₂NH₂, and L₃ = NH(CH₂)₂ NH(CH₂)₂NH₂), to yield organofunctionalized BaPSiL₁, BaPSiL₂ and BaPSiL₃ nanomaterials. The amounts of organofunctional groups covalently attached to the inorganic layer were (1.24, 1.46, and 1.23) mmol · g^?1, respectively. The basic nitrogen atoms attached to the distinct pendant organic chains adsorb divalent nickel and cobalt from aqueous solutions, as represented by well-established isotherms. The energetic effects caused by metallic cation interactions were determined through calorimetric titration at the solid/liquid interface and gave a net thermal effect that enabled enthalpy and equilibrium constant calculations. Complete thermodynamic results composed of exothermic enthalpy, negative free Gibbs energy and positive entropy result in a set of favourable cation/basic centre interactions, to indicate that these nanomaterials could be useful tools to eliminate undesirable cations from aqueous systems.     

Crystal structure and thermal analysis of the tetramethylammonium dichromate and trichromate

The structures of the tetramethylammonium dichromate, [(CH₃)₄N]₂Cr₂O₇ and trichromate, [(CH₃)₄N]₂Cr₃O₁₀, were determined from single-crystal X-ray diffraction data. These compounds crystallize in the orthorhombic system (space group Pnma, with Z=4 and a=17.192(1) Å, b=8.55(1) Å, c=10.637(1) Å), for the dichromate and in the monoclinic system (space group P2₁/n, with Z=4 and a=11.366(2) Å, b=8.493(2) Å, c=20.187(4) Å, β=103.98(3)° for the trichromate. The structures consist of discrete dichromate anions (Cr₂O₇)^2– or trichromate anions (Cr₃O₁₀)^2–, respectively, stabilized by quaternary ammonium [(CH₃)₄N]⁺. Phase transitions in [(CH₃)₄N]₂Cr₂O₇ have been evidenced by differential scanning calorimetry as well as a new allotropic variety of [(CH₃)₄N]₂Cr₂O₇ which was characterized by X-ray powder diffraction. It crystallizes in an orthorhombic system with the unit cell parameters a=24.49(1) Å, b=8.85(1) Å, c=8.705(8) Å.     

Synthesis,spectroscopic, structural and thermal characterizations of [(C7H6NO4)2TeBr6·4H2O]

Tellurium (IV) complexes with pyridine-2,6-dicarboxylate ligand were synthesized by slow evaporation from aqueous solutions yielding a new compound: [(C₇H₆NO₄)₂TeBr₆·4H₂O]. The structure of this compound was solved and refined by single-crystal X-ray diffraction. The compound is centrosymmetric P2₁/c (N°: 14) with the parameters a = 8.875(5) Å, b = 15.174(5) Å, c = 10.199(5) Å, β = 94.271° (5) and Z = 2. The structure consists of isolated H₂O, isolated [TeBr₆]^2? octahedral anions and (pyridine-2,6-dicarboxylate) [C₇H₆NO₄]⁺ cations. The stability of the structure was ensured by ionic and hydrogen bonding contacts (N–H?Br and O–H?Br) and Van-Der Walls interaction. The thermal decomposition of the compound was studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The FTIR and Raman spectroscopy at different temperatures confirm the existence of vibrational modes that correspond to the organic, inorganic and water molecular groups. Additionally, the UV–Vis diffuse reflectance spectrum was recorded in order to investigate the band gap nature. The measurements show that this compound exhibits a semiconducting behavior with an optical band gap of 2.66 eV.     

Palladium and platinum complexes with planar chiral 1,2-disubstituted ferrocenes containing phosphine and thioether donor groups

Three palladium(II) complexes and four platinum(II) complexes having general formula CpFe{1,2-C₅H₃(PPh₂)(CH₂SR)}MCl₂ (M = Pd, R = Ph, Et and tBu; M = Pt, R = Ph, Et, tBu and Cy) have been synthesized by reaction of the corresponding CpFe{1,2-C₅H₃(PPh₂)(CH₂SR)} ligands with PdCl₂(CH₃CN)₂ or PtCl₂(CH₃CN)₂. These complexes have been fully characterized in solution and in solid state. In all cases, monomeric square planar complexes were obtained as pure diastereoisomers.     

The effect of bridgehead steric bulk on the ground state and intramolecular exchange processes of (μ-SCH2CR2CH2S)[Fe(CO)3][Fe(CO)2L] complexes

The flexibility of the coordination sphere in the diiron organometallic is likely an important design component in nature's electrocatalyst for proton reduction or H₂ oxidation, i.e, the active site of [FeFe]hydrogenase. A series of complexes, (μ-SCH₂CRR′CH₂S)[Fe(CO)₃][Fe(CO)₂L] with steric bulk incorporated into the μ-S-to-S linker was synthesized and the compounds were analyzed by infrared spectroscopy and cyclic voltammetry [(R/R′ = Me/Me, Et/Et, Bu/Et), (L = CO, PPh₃, IMes (1,3-bis(2,4,6-trimethylphenyl)-imidazol-2-ylidene), and IMe (1,3-dimethylimidazole-2-ylidene))]. While added steric bulk at the bridgehead carbon of the μ-SCH₂CR₂CH₂S produced little change in the ground state structures (X-ray diffraction) and electronic character for the (μ-SRS)[Fe(CO)₃]₂ complexes, monosubstitution of a CO with L produced distortions consistent with steric interference of the μ-SRS with nearby ligands as compared to the similar (μ-pdt)[Fe(CO)₃][Fe(CO)₂L] (pdt = S(CH₂)₃S). Variable temperature NMR studies have shown that the activation barrier for CO site exchange on the sterically bulky complexes decreases in a manner predicted by theory [J.W. Tye, M.B. Hall, M.Y. Darensbourg, Inorg. Chem. 45 (2006) 1552].     

Novel dual inhibitors against FP-2 and PfDHFR as potential antimalarial agents: Design,synthesis and biological evaluation

A series of novel 2,4-diaminopyrimidine-modified compounds was designed and synthesized. Compound 14 showed micromolar dual inhibitory effect on both FP-2 and PfDHFR, and potential inhibition to the proliferation of P. falciparum 3D7 strain and chloroquine-resistant P. falciparum Dd2 strain.     

Tellurium(II) and tellurium(IV) complexes of phosphine chalcogenide ligands,synthesis and X-ray structures

Reaction of TeX₄ (X = Cl or Br) with 2 mol. equiv. of OPR₃ (R = Me, Et or Ph) gives the distorted octahedral cis-[TeX₄(OPR₃)₂], while the bidentates Ph₂P(E)(CH₂)_nP(E)Ph₂ (E = O, n = 1 or 2; E = S, n = 1) give the six-coordinate [TeX₄{Ph₂P(E)(CH₂)_nP(E)Ph₂}]. These species have been characterised spectroscopically (via ¹H and ³¹P{¹H} NMR and IR) and by crystallographic analyses on cis-[TeBr₄(OPPh₃)₂], [TeCl₄{Ph₂P(O)CH₂P(O)Ph₂}] and [TeBr₄{Ph₂P(S)CH₂P(S)Ph₂}]. The TeX₄ (X = Cl or Br) are reduced by Ph₂P(S)(CH₂)₂P(S)Ph₂ and Ph₂P(Se)CH₂P(Se)Ph₂, giving the planar, four-coordinate Te(II) species [Te{Ph₂P(S)(CH₂)₂P(S)Ph₂}₂]²⁺ (isolated as [(TeCl₅)₂{μ-Ph₂P(S)(CH₂)₂P(S)Ph₂}]^2? and [TeBr₆]^2? salts) and [TeBr₂{Ph₂P(Se)CH₂P(Se)Ph₂}], all of which have also been identified crystallographically. On the basis of the structural data the Te-based lone pair associated with the Te(IV) species is assumed to occupy the 5s orbital, whereas in the Te(II) complexes the planar coordination is consistent with the two stereochemically active lone pairs occupying the axial sites.     

Enthalpies of solvation of ethylene oxide oligomers CH3O(CH2CH2O)nCH3 (n = 1 to 4) in different H-bonding solvents: Methanol,chloroform, and water. Group contribution method as applied to the polar oligomers

The enthalpies of solution and solvation of ethylene oxide oligomers CH₃O(CH₂CH₂O)_nCH₃ (n = 1 to 4) in methanol and chloroform have been determined from calorimetric measurements at T = 298.15 K. The enthalpic coefficients of pairwise solute–solute interaction for methanol solutions have been calculated. The enthalpic characteristics of the oligomers in methanol, chloroform, water and tetrachloromethane have been compared. The hydrogen bonding of the oligomers with chloroform and water molecules is exhibited in the values of solvation enthalpy and coefficient of solute–solute interaction. This effect is not observed for methanol solvent. The thermochemical data evidence an existence of multi-centred hydrogen bonds in associates of polyethers with the solvent molecules. Enthalpies of hydrogen bonding of the oligomers with chloroform and water have been estimated. The additivity scheme has been developed to describe the enthalpies of solvation of ethylene oxide oligomers, unbranched monoethers and n-alkanes in chloroform, methanol, water, and tetrachloromethane. The correction parameters for contribution of repeated polar groups and correction term for methoxy-compounds have been introduced. The obtained group contributions permit to describe the enthalpies of solvation of unbranched monoethers and ethylene oxide oligomers in the solvents with standard deviation up to 0.6 kJ · mol⁻¹. The values of group contributions and corrections are strongly influenced by solvent properties.     

Structure elucidation of BaSi2O2N2 – A host lattice for rare-earth doped luminescent materials in phosphor-converted (pc)-LEDs

BaSi₂O₂N₂ is a promising host lattice for rare-earth doped luminescent materials in phosphor-converted (pc)-LEDs. Applying a combined approach, its orthorhombic average structure (space group Cmcm (no. 63), a = 14.3902(3) Å, b = 5.3433(1) Å, c = 4.83256(7) Å and V = 371.58(2) Å³, Z = 4) has been elucidated by electron diffraction and structure solution from X-ray and neutron powder diffraction data with subsequent Rietveld refinement (wRp = 0.0491 for X-ray data). The structure contains layers of highly condensed SiON₃ tetrahedra with O terminally bound to Si. The Ba²⁺ ions are situated between the layers and are surrounded by a cuboid of O atoms capped by two N atoms. In the structure, there is only one Ba site and one Si site, respectively, which is in accordance with a single sharp ²⁹Si NMR signal observed at ?52.8 ppm typical for SiON₃ tetrahedra in MSi₂O₂N₂ type oxonitridosilicates. Lattice energy calculations support the results of the structure determination.     

Synthesis and properties of alkaline metal complexes with new overcrowded β-diketiminato ligands

Enaminoimines TbtNHC(Me)CHC(Me)NAr (5, Tbt = 2,4,6-[CH(SiMe₃)₂]₃C₆H₂) bearing a Tbt group were synthesized by the two steps condensation of acetylacetone with bulky amines. Enaminoimines 5 were treated with n-BuLi to give the corresponding lithium β-diketiminates, [Li{TbtNHC(Me)CHC(Me)NAr}] (1). The X-ray structural analysis of [Li{TbtNC(Me)CHC(Me)NMes}] (1c, Mes = mesityl) revealed that it is a monomeric, solvent-free lithium β-diketiminate. The equilibrium between free 1c plus THF and THF-coordinated (1c · thf) was investigated in detail by the determination of the association constant (K_a) in C₆D₆ at 293 K and the Job’s plot. The heavier alkali metal complexes, sodium and potassium β-diketiminates (6c–9c), were prepared by the two routes. THF-coordinated [M{TbtNC(Me)CHC(Me)NMes}(thf)] (6c: M = Na. 7c: M = K) were prepared by the reaction of 5c (Ar = Mes) with MH (M = Na, K). Solvent-free [M{TbtNC(Me)CHC(Me)NMes}] (8c: M = Na. 9c: M = K) were prepared by the reaction of 1c with t-BuOM (M = Na, K).     

Synthesis,characterization and fluorescence properties of hexanuclear zinc(II) complexes

Two hexanuclear zinc(II) complexes, [Zn₆(L¹)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · CH₃CN (1 · CH₃CN) and [Zn₆(L²)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · 4CH₃CN (2 · 4CH₃CN), where HL¹ = 4-methyl-2,6-bis(cyclohexylmethyliminomethyl)-phenol and HL² = 4-methyl-2,6-bis(1-naphthalylmethyliminomethyl)-phenol, have been synthesized and characterized by elemental analysis, FT-IR and fluorescence spectroscopic methods, and by X-ray diffraction analysis. In the asymmetric unit of complex 1, two of the three zinc atoms have pentacoordinate geometries and the other is tetrahedrally coordinated, whereas the three distinct Zn atoms in complex 2 adopt three different coordination environments, namely distorted octahedral, trigonal bipyramidal and tetrahedral. The fluorescence properties of the ligands and complexes have been investigated.     

Rhizopus arrhizus-mediated asymmetric reduction of arylalkanones: unusual anti-Prelong products with benzyl alkyl ketones

Rhizopus arrhizus-mediated microbial reduction of various aryl alkyl ketones afforded chiral carbinols in good yields and high enantiomeric purity. The most striking feature was the formation of the anti-Prelog (R)-alcohols with the benzyl alkyl ketones, while the other ketones ArXCOR (X = (CH₂)_n, n = 0 or 2, OCH₂ or SCH₂ and R = Me/Et/n-Bu) furnished (S)-alcohols.     

Reactions of β-diketiminatoaluminum hydrides with tert-butyl hydrogenperoxide – Facile formation of dialuminoxanes containing Al–O–Al groups

Treatment of diphenyl-β-diketiminatoaluminum dihydride, LAlH₂ [1, L = {H₅C₆–NC(Me)}₂CH] with neopentyl- or trimethylsilylmethyllithium afforded the corresponding alkylderivatives LAlH(R) [R = CH₂–SiMe₃ (2), CH₂–CMe₃ (3)] by the precipitation of lithium hydride. Deprotonation of a methyl group instead of salt elimination occurred by the similar reaction of the more basic alkyllithium compound LiC(SiMe₃)₃. The reactions of the hydrides 1–3 with tert-butyl hydrogenperoxide did not yield the expected peroxo derivatives, instead the dialuminoxanes LAl(R)–O–Al(R)L [R = OCMe₃ (5), CH₂SiMe₃ (6), CH₂CMe₃ (7)] were isolated in high yields. Their Al–O–Al bridges deviated from linearity and had Al–O–Al bond angles of about 155° on average.     

Surveying the {AuCl} adducts of bulky phosphines bearing the 2,6-dimesitylphenyl group

A series of gold chloride {AuCl} adducts of the sterically demanding phosphines DmpPR₂ (Dmp = 2,6-dimesitylphenyl; R = H (1); Me (2); Cl (3)) have been prepared. The adducts are readily formed by the reaction of Au(tht)Cl and DmpPR₂, yielding [(DmpPR₂)AuCl] (R = H (4); Me (5); Cl (6)) in moderate to excellent yields. All three new compounds have been structurally characterized. The structures demonstrate little or no significant intermolecular Au?Au or intramolecular Au?arene interactions. In addition, the new difluoroarylphosphine DmpPF₂ (7) has been prepared and structurally characterized.     

Synthesis,structure and solid state NMR analysis of a new templated titanium(III/IV) fluorophosphate

The title compound MIL-131 (MIL stands for Material from Institut Lavoisier) was prepared hydrothermally (4 days, 473 K, autogenous pressure) in the presence of an organic base (N((CH₂)₂NH₂)₃). The structure of MIL-131 or Ti^IIITi^IV(OH)F₄(HPO₄)·(PO₄)·(N((CH₂)₂NH₃)₃) has been determined ab initio from X-Ray synchrotron powder diffraction data using simulated annealing methods and was refined in the triclinic space group P-1 (no. 2). MIL-131 exhibits a one-dimensional structure built up from inorganic chains of corner sharing TiO₅(OH) titanium(III) octahedra and PO₄ and HPO₄ phosphate tetrahedra, related to TiO₂F₄ titanium octahedra. Protonated triamine cations are located between the inorganic motifs, and interact strongly with the mineral network through hydrogen bondings both with terminal fluorine atoms and hydroxo or oxo groups. Multinuclear solid state NMR has allowed a clear attribution of the protons, fluoride, and phosphate groups environment within the framework of MIL-131. The large values of chemical shift anisotropy together with the absence of any ¹³C NMR response confirmed the presence of paramagnetic titanium(III) species deduced from the crystal structure. Finally, 2D MAS ¹H-³¹P CP-HETCOR NMR correlation experiment gives some insight on the nature of the intra-framework hydrogen bonding.Crystal data for MIL-131: a = 14.109(1) Å, b = 8.462(3) Å, c = 7.179(1) Å, α = 93.772(1)°, β = 96.566(2)°, γ = 98.004(1)°, V = 840.36(2) ų, z = 2.     

Highly sensitive fluorescent sensor targeting CuCl2 based on thiophene attached anthracene compound (TA)

A novel thiophene attached anthracene (TA) based fluorescent compound was designed and synthesized. The TA showed a high quantum yield (Qy = 0.34) in regard to fluorescence. We applied this TA compound to detect specific metal compound and found that it could identify CuCl₂ from other metals through dramatic fluorescence change at λ_max = 460 nm. It showed strong quenching fluorescence property with CuCl₂ while with other metal compounds it exhibited strong blue fluorescence emission. UV/Vis absorption spectroscopy clearly demonstrated that the quenching property of TA at λ_max = 460 nm was due to overlapping of the fluorescence peak of TA at λ_max = 460 nm and the absorption band of CuCl₂ (from 190 nm to 525 nm). Binding constant (K′), which was 0.0895 mM^?2, indicated a complexation ratio between TA and CuCl₂ as 1:2 and this interaction induced quenching property.