Rapid and Efficient Synthesis of Imidazolines and Bisimidazolines Under Microwave and Ultrasonic Irradiation

Summary. Small assemblies of 2-imidazolines and bisimidazolines from appropriate nitriles and ethylenediamine with catalytic amounts of P₂S₅ employing a microwave assisted protocol were prepared. Sonication of this system also led to successful synthesis of 2-imidazolines and bisimidazolines. Another advantage of these systems is the ability to carry out large scale reactions.     

Synthesis of ordered copolyamides by the interfacial polycondensation of the hydrolyzate of bisimidazoline with diacid chloride

Ordered copolyamides were prepared by the interfacial polycondensation of the hydrolyzate of bisimidazoline in the aqueous solution with diacid chloride in chloroform solution; bisimidazolines used were 1,4-bis(imidazoline-2-yl)butane and 1,4-bis(imidazoline-2-yl)-octane; diacid chlorides used were adipoyl chloride, sebacoyl chloride, and terephthaloyl chloride. The aqueous solutions of the hydrolyzates of bisimidazolines were prepared by heating the aqueous solutions of imidazolines at 70°C. It was shown by infrared spectra and paper electrophoresis of the hydrolyzates that bisimidazolines were hydrolyzed to give quantitatively diamines containing amides linkages of the type H₂N(CH₂)₂NH-CORCONH(CH₂)₂NH₂. The regularity in the sequence of the copolyamide of nylon 26 and nylon 2T prepared from the hydrolyzate of 1,4-bis(imidazoline-2-yl)butane and terephthaloyl chloride was studied by NMR spectrometry: it was concluded that the copolyamide was highly ordered.     

A Convenient Way to Methylated 2-Imidazolines. Syntheses of Fluorene and Triazine Cyclic Diamidines

One N-methyl- and 4-substituted 2-imidazolines are described. Fluorene bisimidazolines were obtained in good yield (64–92%), starting from 2,7-dicyanofluorene and ammonium sulfide. In a two-step procedure the crude bisthioamide was reacted with excess diaminoalkane-ethanol (1:1 mixture) in an oil bath. This new procedure is superior over standard methods. For the sake of comparison, a new triazine bisimidazoline was prepared by direct conversion of the appropriate bisnitrile. Preliminary in vitro studies have shown an interesting anticancer activity of this compound (NSC 710607) against diverse human cancer types, including colon, CNS, melanoma, breast, non-small cell lung, and ovarian.     

A Convenient Way to Methylated 2-Imidazolines. Syntheses of Fluorene and Triazine Cyclic Diamidines

Summary. One N-methyl- and 4-substituted 2-imidazolines are described. Fluorene bisimidazolines were obtained in good yield (64–92%), starting from 2,7-dicyanofluorene and ammonium sulfide. In a two-step procedure the crude bisthioamide was reacted with excess diaminoalkane-ethanol (1:1 mixture) in an oil bath. This new procedure is superior over standard methods. For the sake of comparison, a new triazine bisimidazoline was prepared by direct conversion of the appropriate bisnitrile. Preliminary in vitro studies have shown an interesting anticancer activity of this compound (NSC 710607) against diverse human cancer types, including colon, CNS, melanoma, breast, non-small cell lung, and ovarian.     

Oxidation of 2-imidazolines to 2-imidazoles with sodium periodate catalyzed by polystyrene-bound manganese(III) porphyrin

In the present work, the dehydrogenation of 2-substituted imidazolines with sodium periodate in the presence of tetraphenylporphyrinatomanganese(III) chloride supported on polystyrene-bound imidazole, [Mn(TPP)Cl@PSI] is reported. A wide variety of 2-imidazolines were efficiently converted to their corresponding imidazoles by the [Mn(TPP)Cl@PSI]/NaIO₄ catalytic system in a 1:2 CH₃CN/H₂O mixture under agitation with magnetic stirring. Ultrasonic irradiation enhanced the catalytic activity of this catalyst in the oxidation of 2-imidazolines and this led to shorter reaction times and higher product yields. This catalyst could be reused several times without significant loss of its catalytic activity.     

Rational design of sterically and electronically easily tunable chiral bisimidazolines and their applications in dual Lewis acid/brønsted base catalysis for highly enantioselective nitroaldol (Henry) reactions

A new addition to the rational design of sterically and electrically easily tunable chiral bis(imidazoline) ligands from chiral amino alcohols has been developed. Vast structural variation of chiral bis(imidazoline) ligands can be simply achieved by the choice of both the 1,2‐amino alcohol and its N‐1 R¹ substituent. A small library of chiral bisimidazolines ( 1 a – h ) has been constructed. The method has provided an easy and simplified route to a diverse set of air‐stable and water‐tolerant chiral bis(imidazoline) ligands on 10 g scales. The dual Lewis Acid/Brønsted base catalytic system generated from the (S)‐ 1 a /Cu(OTf)₂ complex and Et₃N was able to catalyze Henry reactions between aldehydes and nitromethane effectively at room temperature, and also to tolerate a wide scope of aldehydes with excellent enantiomeric excesses. Not only aromatic aldehydes but also aliphatic aldehydes afforded the nitroalcohol products, with enantiomeric excesses in the 93–98 % range. This dual catalytic system is among the most effective systems so far reported for the asymmetric parent Henry reactions. This work also represents the first members of the class of chiral bisimidazolines to have been demonstrated to achieve excellent enantioselectivities.     

A simple synthesis of Δ2-oxazolines, Δ2-oxazines, Δ2-thiazolines and Δ2-imidazolines

Carboxylic acids react with amino alcohols, amino mercaptans or diamines in the presence of triphenylphosphine, CCl₄ and tert. bases to afford in 50–75% yield the corresponding Δ²-oxazolines, Δ²-oxazines, Δ²-thiazolines and Δ²-imidazolines.     

Synthesis of substituted imidazolines via [3+2]-cycloaddition of aziridines with nitriles

An efficient synthesis of 2,4-disubstituted 1H-imidazolines from aziridines and nitriles in the presence of BF₃-Et₂O or triethyloxonium tetrafluoroborate has been described. The reaction proceeds via a [3+2]-cycloaddition reaction. Most of the nitriles successfully underwent cycloaddition reactions with aziridines even at room temperature in a very short time.     

Synthesis,stereochemistry, and isomeric transformations of cis- and trans-1,2-dimethyl-4-aryl-5-aroyl-2-imidazolines

The corresponding trans- and cis-1,2-dimethyl-4-aryl-5-aroyl-2-imidazolines were obtained from complexes of cis- and trans-1-methyl-2-aryl-3-aroylaziridines with BF₃ by heating with acetonitrile. The reaction proceeds with inversion of the configuration of the starting 3-aroylaziridines. In the presence of bases the complexes of cis-1,2-dimethyl-4-aryl-5-aroyl-2-imidazolines readily undergo isomerization to the corresponding trans analogs. The structures of the products were established on the basis of the IR, PMR, and mass spectra and the results of elementary analysis. The configurations of the compounds were determined by means of the Overhauser nuclear effect.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 952–957, July, 1981.     

Chiral trans-carboxylic trifluoromethyl 2-imidazolines by a Ag2O-catalyzed Mannich-type reaction

Trifluoromethyl aldimines derived from α-amino esters have proven to be very good starting materials to obtain the title compounds. A Ag₂O-catalyzed Mannich-type/cyclization cascade reaction starting from suitable α-isocyano acetates leads to enantiopure valuable trans-carboxylic trifluoromethyl substituted 2-imidazolines by a highly stereoselective addition without the need to add organocatalysts.     

Copper-catalyzed synthesis of 2-imidazolines and their N-hydroxyethyl derivatives under various conditions

A rapid and efficient method for the synthesis of 2-imidazolines and their N-hydroxyethyl derivatives from the reaction of aromatic nitriles with ethylenediamine (EDA) or N-(2-aminoethyl)ethanolamine (AEEA) using cupric indole-3-acetate (Cu(II)-(IAA)₂) as a reusable catalyst under reflux and microwave conditions is reported. And seven new N-hydroxyethyl-imidazolines were reported for the first time.     

A facile one-pot synthesis of 2-fluoroalkyl 1,3-imidazolines and 1,3-oxazolines through imidoyl halide intermediates

A facile one-pot procedure has been developed for the synthesis of 1,3-imidazolines and 1,3-oxazolines bearing fluorinated alkyl groups at the 2-position. The reaction involves the condensation of N-monosubstituted ethane-1,2-diamines or 2-aminoethanols with a fluorinated carboxylic acid in the presence of PPh₃/CX₄. The proposed mechanism is that the amide intermediates were initially formed, and then converted to the imidoyl halide intermediates in the presence of PPh₃/CX₄, followed by rapid intramolecular cyclization to 1,3-diazoline products. This protocol allows for the synthesis of 2-bromodifluoromethyl-1,3-imidazoline, a useful CF₂Br-heterocyclic building block, which can be used for the synthesis of gem-difluoromethylene linked compounds.     

Synthesis,stereochemistry, and isomeric transformations of 4-aryl-5-aroyl-2-methylthio-2-imidazolines

The corresponding 4-aryl-5-aroyl-2-methylthio-2-imidazolines were obtained by the reaction of complexes of cis- and trans-3-aroylaziridines and boron trifluoride with methyl thiocyanate. It is shown on the basis of spectral data that the aziridine ring is opened regiospecifically at the C(₂) atom and stereospecifically with inversion of the configuration.Deceased.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1484–1488, November, 1988.     

Azomethine ylide mediated inversion of configuration of quaternary imidazoline carbon: converting trans- to its cis- imidazolines

An efficient synthetic methodology of converting trans-4,5-diaryl-2-imidazolines to the corresponding cis-4,5-diaryl-2-imidazolines has been developed. This methodology features mild reaction conditions and a simple one-pot two-step procedure.     

Synthesis and physicochemical properties of 1-(2-alkylamidoethyl)-2-alkyl-2-imidazolines based on α,α′-branched carboxylic acids

Condensation of diethylenetriamine with lauric, 2-ethylhexanoic, and α,α′-branched C_10,12-carboxylic acids results in 1-(2-alkylamidoethyl)-2-alkyl-2-imidazolines. A stability of the synthesized compounds relative to the acid and alkaline hydrolysis was studied. Their protonation constants were determined. The effect of the structure of the alkyl substituents on the distribution of the substance between the organic and aqueous phases was examined. The principal possibility of extracting Zn(II), Fe(III), Cu(II), Co(II), Mn(II) chlorides from hydrochloric acid solutions was shown. A mixture of 1-(2-alkylamidoethyl)-2-alkyl-2-imidazolines based on the α,α′-branched carboxylic acids was suggested as a potential extractant of the metal salts from hydrochloric acid and chloride solutions.     

Multi-wall carbon nanotube supported manganese(III) porphyrin: an efficient and reusable catalyst for oxidation of 2-imidazolines with sodium periodate

The oxidation of 2-substituted imidazolines with sodium periodate catalyzed by tetrakis(p-aminophenyl)-porphyrinatomanganese(III) chloride, [Mn(TNH₂PP)Cl], supported on functionalized multi-wall carbon nanotubes is reported. A wide variety of 2-imidazolines were efficiently converted to their corresponding imidazoles by this catalytic system. When the same reaction was subjected to ultrasonic irradiation, the reaction times were reduced significantly and the product yields were increased. This catalyst could be reused several times without significant loss of activity. The effects of reaction parameters such catalyst amount, choice of solvent, and the effects of ultrasonic irradiation on the catalytic activity have been investigated.     

Synthesis of 1,2-diaryl-2-imidazolines

Polyphosphoric acid and N-aryl-N′-benzoylethylenediamines in a type of Bischler-Napieralski reaction afforded 1,2-diaryl-2-imidazolines in good yields, rather than the 2,3-dihydro-1H-[1,4]-benzodiazepines. Blocking of the amino nitrogen by a methyl or ethyl group, to avoid imidazoline formation, gave starting material rather than the expected dihydrobenzodiazepine. When p-tosyl was the blocking group, imidazoline was again the only product isolated. Analytical and spectroscopic data of several unreported 1,2-diaryl-2-imidazolines are presented.     

Imidazolines in synthesis,I: lithio imidazolines-formation and C-alkylation

2-Methyl-2-imidazolines have been lithiated and then $\text{C}$-alkylated; further metallation - alkylation of the products has been completed. Hydrolysis of the products to carboxylic acids completes a homologation, the imidazoline providing a two-carbon unit.     

Reaction of N-alkoxycarbonylaziridines with nitriles

The acid catalysed reaction of acetonitrile or benzonitrile with N-alkoxycarbonylaziridines, 1a and 1b yields the corresponding 1-alkoxycarbonyl-2-imidazolines, 2ax, 2ay, and 2bx. The imidazolines obtained by the reaction of N-ethoxycarbonyl-2,3-tetramethyleneaziridine (1c) with acetonitrileor benzonitrile are labile and are readily hydrolysed to trans-cyclohexane-1,2-diamine derivatives (3cx or 3cy). The nitrile-addition supposedly proceeds S_N2 type CN bond cleavage and CN bond formation.     

Green oxidation of 2-imidazolines with tert-butyl hydroperoxide catalyzed by supported manganese(III) porphyrin in water

Green oxidation of 2-substituted imidazolines with tert-butyl hydroperoxide catalyzed by tetraphenylporphyrinatomanganese(III) chloride, [Mn(TPP)Cl], supported on polystyrene and silica bound imidazole is reported. A variety of 2-imidazolines were efficiently converted to their corresponding imidazoles by these catalytic systems in H₂O. Ultrasonic (US) irradiation enhanced the catalytic activity of these catalysts and higher product yields were observed at shorter reaction times. These catalysts were re-used several times without significant loss of their catalytic activities. The effect of reaction parameters such as catalyst amount, reaction temperature, and the effect of US irradiation on the catalytic activity was also investigated.