Zeolitic Imidazolate Framework/Graphene Oxide Hybrid Nanosheets as Seeds for the Growth of Ultrathin Molecular Sieving Membranes

A defect‐free zeolitic imidazolate framework‐8 (ZIF‐8)/graphene oxide (GO) membrane with a thickness of 100 nm was prepared using two‐dimensional (2D) ZIF‐8/GO hybrid nanosheets as seeds. Hybrid nanosheets with a suitable amount of ZIF‐8 nanocrystals were essential for producing a uniform seeding layer that facilitates fast crystal intergrowth during membrane formation. Moreover, the seeding layer acts as a barrier between two different synthesis solutions, and self‐limits crystal growth and effectively eliminates defects during the contra‐diffusion process. The resulting ultrathin membranes show excellent molecular sieving gas separation properties, such as with a high CO₂/N₂ selectivity of 7.0. This 2D nano‐hybrid seeding strategy can be readily extended to the fabrication of other defect‐free and ultrathin MOF or zeolite molecular sieving membranes for a wide range of separation applications.     

Unlocking the Electrocatalytic Activity of Antimony for CO2 Reduction by Two‐Dimensional Engineering of the Bulk Material

Two‐dimensional (2D) materials are known to be useful in catalysis. Engineering 3D bulk materials into the 2D form can enhance the exposure of the active edge sites, which are believed to be the origin of the high catalytic activity. Reported herein is the production of 2D “few‐layer” antimony (Sb) nanosheets by cathodic exfoliation. Application of this 2D engineering method turns Sb, an inactive material for CO₂ reduction in its bulk form, into an active 2D electrocatalyst for reduction of CO₂ to formate with high efficiency. The high activity is attributed to the exposure of a large number of catalytically active edge sites. Moreover, this cathodic exfoliation process can be coupled with the anodic exfoliation of graphite in a single‐compartment cell for in situ production of a few‐layer Sb nanosheets and graphene composite. The observed increased activity of this composite is attributed to the strong electronic interaction between graphene and Sb.     

A Generalized Strategy for the Synthesis of Large‐Size Ultrathin Two‐Dimensional Metal Oxide Nanosheets

Two‐dimensional (2D) nanomaterials show unique electrical, mechanical, and catalytic performance owing to their ultrahigh surface‐to‐volume ratio and quantum confinement effects. However, ways to simply synthesize 2D metal oxide nanosheets through a general and facile method is still a big challenge. Herein, we report a generalized and facile strategy to synthesize large‐size ultrathin 2D metal oxide nanosheets by using graphene oxide (GO) as a template in a wet‐chemical system. Notably, the novel strategy mainly relies on accurately controlling the balance between heterogeneous growth and nucleation of metal oxides on the surface of GO, which is independent on the individual character of the metal elements. Therefore, ultrathin nanosheets of various metal oxides, including those from both main‐group and transition elements, can be synthesized with large size. The ultrathin 2D metal oxide nanosheets also show controllable thickness and unique surface chemical state.     

A Review on Graphene Oxide Two-dimensional Macromolecules: from Single Molecules to Macro-assembly

Graphene oxide(GO), which consists of two-dimensional(2 D) sp² carbon hexagonal networks and oxygen-contained functional groups, has laid the foundation of mass production and applications of graphene materials. Made by chemical oxidation of graphite, GO is highly dispersible or even solubilized in water and polar organic solvents, which resolves the hard problem of graphene processing and opens a door to wet-processing of graphene. Despite its defects, GO is easy to functionalize, dope, punch holes, cut into pieces, conduct chemical reduction, form lyotropic liquid crystal, and assemble into macroscopic materials with tunable structures and properties as a living building block. GO sheet has been viewed as a single molecule, a particle, as well as a soft polymer material. An overview on GO as a 2 D macromolecule is essential for studying its intrinsic properties and guiding the development of relevant subjects. This review mainly focuses on recent advances of GO sheets, from single macromolecular behavior to macro-assembled graphene material properties. The first part of this review offers a brief introduction to the synthesis of GO molecules. Then the chemical structure and physical properties of GO are presented, as well as its polarity in solvent and rheology behavior. Several key parameters governing the ultimate stability of GO colloidal behavior, including size, p H and the presence of cation in aqueous dispersions, are highlighted. Furthermore, the discovery of GO liquid crystal and functionalization of GO molecules have built solid new foundations of preparing highly ordered, architecture-tunable, macro-assembled graphene materials, including 1 D graphene fibers, 2 D graphene films, and 3 D graphene architectures. The GO-based composites are also viewed and the interactions between these target materials and GO are carefully discussed. Finally, an outlook is provided in this field, where GO is regarded as macromolecules, pointing out the challenges and opportunities that exist in the field. We hope that this review will be beneficial to the understanding of GO in terms of chemical structure,molecular properties, macro-assembly and potential applications, and encourage further development to extend its investigations from basic research to practical applications.     

Robust Superhydrophobic/Superoleophilic Wrinkled Microspherical MOF@rGO Composites for Efficient Oil–Water Separation

Graphene/MOF‐based composite materials in three‐dimensional (3D) architectures are promising for the treatment of oil‐containing wastewater by absorption owing to their intrinsic properties of graphene and metal‐organic frameworks (MOFs), such as high porosity, ultralow density, and facilely tailored superwettability. In this study, novel wrinkled 3D microspherical MOF@rGO composites with both superhydrophobic and superoleophilic properties were developed by embedding MOF nanoparticles between graphene oxide (GO) nanosheets, followed by high‐temperature reduction self‐assembly. The microspherical composites feature a unique micro/nano hierarchy consisting of crumpled reduced GO (rGO) nanosheets intercalated with well‐dispersed MOF nanoparticles. Combined with the superwettability and abundant meso/microporosity, the peculiar architectures of wrinkled ZIF‐8@rGO microspheres show very fast absorption rates and high sorption selectivity for organic solvents and oils from water.     

Ultrathin Hexagonal Hybrid Nanosheets Synthesized by Graphene Oxide‐Assisted Exfoliation of β‐Co(OH)2 Mesocrystals

In the present study, we report the synthesis of a high‐quality, single‐crystal hexagonal β‐Co(OH)₂ nanosheet, exhibiting a thickness down to ten atomic layers and an aspect ratio exceeding 900, by using graphene oxide (GO) as an exfoliant of β‐Co(OH)₂ nanoflowers. Unlike conventional approaches using ionic precursors in which morphological control is realized by structure‐directing molecules, the β‐Co(OH)₂ flower‐like superstructures were first grown by a nanoparticle‐mediated crystallization process, which results in large 3D superstructure consisting of ultrathin nanosheets interspaced by polydimethoxyaniline (PDMA). Thereafter, β‐Co(OH)₂ nanoflowers were chemically exfoliated by surface‐active GO under hydrothermal conditions into unilamellar single‐crystal nanosheets. In this reaction, GO acts as a two‐dimensional (2D) amphiphile to facilitate the exfoliation process through tailored interactions between organic and inorganic molecules. Meanwhile, the on‐site conjugation of GO and Co(OH)₂ promotes the thermodynamic stability of freestanding ultrathin nanosheets and restrains further growth through Oswald ripening. The unique 2D structure combined with functionalities of the hybrid ultrathin Co(OH)₂ nanosheets on rGO resulted in a remarkably enhanced lithium‐ion storage performance as anode materials, maintaining a reversible capacity of 860 mA h g^?1 for as many as 30 cycles. Since mesocrystals are ubiquitous and rich in morphological diversity, the strategy of the GO‐assisted exfoliation of mesocrystals developed here provides an opportunity for the synthesis of new functional nanostructures that could bear importance in clean renewable energy, catalysis, photoelectronics, and photonics.     

Development of Miniature Solid Contact Ion Selective Electrodes for in situ Instrumentation

Using a standardized miniature format ion selective electrode, five different carbon based solid contact materials, including a novel commercially available graphene oxide assisted carbon nanotube dispersion (Flexiphene^TM), were compared. The electromotive force (EMF) response, stability, and behavior following storage was evaluated. Bulk resistance for the novel graphene oxide/carbon nanotube (GO‐CNT) based ISE was observed to be 0.09±0.03 MΩ, which is two orders of magnitude lower than reported for either component in isolation. The results for previously described solid contact materials are in general agreement with the literature, and the tradeoffs between solid contact layer material choices are discussed. Performance of GO‐CNT solid contact ion selective electrodes were then evaluated in a 3D‐printed fluidic array to determine their suitability for future in situ instruments.     

Self-assembly of graphene oxide nanosheets in t-butanol/water medium under gamma-ray radiation

Graphene oxide (GO) nanosheets dispersed in strong acidic t-butanol/water medium can be reduced and self-assembled into a self-standing graphene hydrogel under γ-ray radiation, providing a facile and economical preparation method for hydroxylalkylated graphene-based aerogel.     

Wrapping Nanocellulose Nets around Graphene Oxide Sheets

Constructing advanced functional nanomaterials with pre‐designed organized morphologies from low‐dimension synthetic and biological components is challenging. Herein, we report an efficient and universal amphiphilicity‐driven assembly strategy to construct “hairy” flexible hybrid nanosheets with a 1D cellulose nanofibers (CNFs) net conformally wrapped around 2D graphene oxide (GO) monolayers. This interface‐driven bio‐synthetic assembly is facilitated by tailoring the surface chemistry of flexible GO sheets, resulting in individual sheets tightly surrounded by dense conformal nanocellulose network. The mechanical stability of the products far exceeds the compressive instability limits of both individual components. Additionally, the CNF network significantly enhances the wetting ability of initial hydrophobic reduced GO nanosheets, allowing fast water transport combined with high filtration efficiency.     

Three‐Dimensional MoS2 Hierarchical Nanoarchitectures Anchored into a Carbon Layer as Graphene Analogues with Improved Lithium Ion Storage Performance

Much attention has recently been focused on the synthesis and application of graphene analogues of layered nanomaterials owing to their better electrochemical performance than the bulk counterparts. We synthesized graphene analogue of 3D MoS₂ hierarchical nanoarchitectures through a facile hydrothermal route. The graphene‐like MoS₂ nanosheets are uniformly dispersed in an amorphous carbon matrix produced in situ by hydrothermal carbonization. The interlaminar distance between the MoS₂ nanosheets is about 1.38 nm, which is far larger than that of bulk MoS₂ (0.62 nm). Such a layered architecture is especially beneficial for the intercalation and deintercalation of Li⁺. When tested as a lithium‐storage anode material, the graphene‐like MoS₂ hierarchical nanoarchitectures exhibit high specific capacity, superior rate capability, and enhanced cycling performance. This material shows a high reversible capacity of 813.5 mAh g^?1 at a current density of 1000 mA g^?1 after 100 cycles and a specific capacity as high as 600 mAh g^?1 could be retained even at a current density of 4000 mA g^?1. The results further demonstrate that constructing 3D graphene‐like hierarchical nanoarchitectures can effectively improve the electrochemical performance of electrode materials.     

Surface‐Confined Single‐Layer Covalent Organic Framework on Single‐Layer Graphene Grown on Copper Foil

The integration of 2D covalent organic frameworks (COFs) with atomic thickness with graphene will lead to intriguing two‐dimensional materials. A surface‐confined covalently bonded Schiff base network was prepared on single‐layer graphene grown on copper foil and the dynamic reaction process was investigated with scanning tunneling microscopy. DFT simulations provide an understanding of the electronic structures and the interactions between the surface COF and graphene. Strong coupling between the surface COF and graphene was confirmed by the dispersive bands of the surface COF after interaction with graphene, and also by the experimental observation of tunneling condition dependent contrast of the surface COF.     

An efficient way to functionalize graphene sheets with presynthesized polymer via ATNRC chemistry

Graphene nanosheets offer intriguing electronic, thermal and mechanical properties and are expected to find a variety of applications in high‐performance nanocomposite materials. The great challenge of exfoliating and dispersing pristine graphite or graphene sheets in various solvents or matrices can be achieved by facilely and properly chemical functionalization of the carbon nanosheets. Here we reported an efficient way to functionalize graphene sheets with presynthesized polymer via a combination of atom transfer nitroxide radical coupling chemistry with the grafting‐onto strategy, which enable us to functionalize graphene sheets with well‐defined polymer synthesized via living radical polymerization. A radical scavenger species, 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO), was firstly anchored onto ? COOH groups on graphene oxide (GO) to afford TEMPO‐functionalized graphene sheets (GS‐TEMPO), meanwhile, the GO sheets were thermally reduced. Next, GS‐TEMPO reacted with Br‐terminated well‐defined poly(N‐isopropylacrylamide) (PNIPAM) homopolymer, which was presynthesized by SET‐LRP, in the presence of CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine to form PNIPAM‐graphene sheets (GS‐PNIPAM) nanocomposite in which the polymers were covalently linked onto the graphene via the alkoxyamine conjunction points. The PNIPAM‐modified graphene sheets are easily dispersible in organic solvents and water, and a temperature‐induced phase transition was founded in the water suspension of GS‐PNIPAM. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Graphene‐Assisted Room‐Temperature Synthesis of 2D Nanostructured Hybrid Electrode Materials: Dramatic Acceleration of the Formation Rate of 2D Metal Oxide Nanoplates Induced by Reduced Graphene Oxide Nanosheets

A new prompt room temperature synthetic route to 2D nanostructured metal oxide–graphene‐hybrid electrode materials can be developed by the application of colloidal reduced graphene oxide (RGO) nanosheets as an efficient reaction accelerator for the synthesis of δ‐MnO₂ 2D nanoplates. Whereas the synthesis of the 2D nanostructured δ‐MnO₂ at room temperature requires treating divalent manganese compounds with persulfate ions for at least 24 h, the addition of RGO nanosheet causes a dramatic shortening of synthesis time to 1 h, underscoring its effectiveness for the promotion of the formation of 2D nanostructured metal oxide. To the best of our knowledge, this is the first example of the accelerated synthesis of 2D nanostructured hybrid material induced by the RGO nanosheets. The observed acceleration of nanoplate formation upon the addition of RGO nanosheets is attributable to the enhancement of the oxidizing power of persulfate ions, the increase of the solubility of precursor MnCO₃, and the promoted crystal growth of δ‐MnO₂ 2D nanoplates. The resulting hybridization between RGO nanosheets and δ‐MnO₂ nanoplates is quite powerful not only in increasing the surface area of manganese oxide nanoplate but also in enhancing its electrochemical activity. Of prime importance is that the present δ‐MnO₂–RGO nanocomposites show much superior electrode performance over most of 2D nanostructured manganate systems including a similar porous assembly of RGO and layered MnO₂ nanosheets. This result underscores that the present RGO‐assisted solution‐based synthesis can provide a prompt and scalable method to produce nanostructured hybrid electrode materials.     

Core–Shell LiFePO4/Carbon‐Coated Reduced Graphene Oxide Hybrids for High‐Power Lithium‐Ion Battery Cathodes

Core‐shell carbon‐coated LiFePO₄ nanoparticles were hybridized with reduced graphene (rGO) for high‐power lithium‐ion battery cathodes. Spontaneous aggregation of hydrophobic graphene in aqueous solutions during the formation of composite materials was precluded by employing hydrophilic graphene oxide (GO) as starting templates. The fabrication of true nanoscale carbon‐coated LiFePO₄‐rGO (LFP/C‐rGO) hybrids were ascribed to three factors: 1) In‐situ polymerization of polypyrrole for constrained nanoparticle synthesis of LiFePO₄, 2) enhanced dispersion of conducting 2D networks endowed by colloidal stability of GO, and 3) intimate contact between active materials and rGO. The importance of conducting template dispersion was demonstrated by contrasting LFP/C‐rGO hybrids with LFP/C‐rGO composites in which agglomerated rGO solution was used as the starting templates. The fabricated hybrid cathodes showed superior rate capability and cyclability with rates from 0.1 to 60 C. This study demonstrated the synergistic combination of nanosizing with efficient conducting templates to afford facile Li⁺ ion and electron transport for high power applications.     

Graphene–carbon 2D heterostructures with hierarchically-porous P,N-doped layered architecture for capacitive deionization

Exploring a new-family of carbon-based desalinators to optimize their performances beyond the current commercial benchmark is of significance for the development of practically useful capacitive deionization (CDI) materials. Here, we have fabricated a hierarchically porous N,P-doped carbon–graphene 2D heterostructure (denoted NPC/rGO) by using metal–organic framework (MOF)-nanoparticle-driven assembly on graphene oxide (GO) nanosheets followed by stepwise pyrolysis and phosphorization procedures. The resulting NPC/rGO-based CDI desalinator exhibits ultrahigh deionization performance with a salt adsorption capacity of 39.34 mg g⁻¹ in a 1000 mg L⁻¹ NaCl solution at 1.2 V over 30 min with good cycling stability over 50 cycles. The excellent performance is attributed to the high specific surface area, high conductivity, favorable meso-/microporous structure together with nitrogen and phosphorus heteroatom co-doping, all of which are beneficial for the accommodation of ions and charge transport during the CDI process. More importantly, NPC/rGO exhibits a state-of-the-art CDI performance compared to the commercial benchmark and most of the previously reported carbon materials, highlighting the significance of the MOF nanoparticle-driven assembly strategy and graphene–carbon 2D heterostructures for CDI applications.

MOF nanoparticle-driven assembly on 2D nanosheets produces the graphene–carbon heterostructure with hierarchically-porous P,N-doped layered architecture.     

Poly(N‐vinylcarbazole) chemically modified graphene oxide

A new soluble donor‐acceptor type poly(N‐vinylcarbazole)‐covalently functionalized graphene oxide (GO‐PVK) has been synthesized by reaction of DDAT (S‐1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐aceticacid)trithiocarbonate)‐PVK with GO‐toluene‐2,4‐diisocynate. The incorporation of sufficient amount of PVK chains makes the modified GO nanosheets readily dispersible in organic solvents. The resulting material exhibits an enhanced solubility of 10 mg/mL in organic solvents. Covalent grafting of PVK onto the edge and surface of GO nanosheets did not change the carbazole absorption in the ultraviolet region, but substantially reduced the absorption intensity of GO in the visible region. The intensity of the emission band of GO‐PVK at 437 nm was a little bit quenched when compared with that of DDAT‐PVK, suggesting intramolecular quenching from PVK to GO. Such intramolecular quenching process may involve energy or electron transfer between the excited singlet states of the PVK moiety and the GO moiety. The HOMO/LUMO values and the energy bandgap of GO‐PVK experimentally estimated by the onset of the redox potentials are ?5.60, ?3.58, and 2.02 eV, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2642–2649, 2010     

Graphene Oxide Restricts Growth and Recrystallization of Ice Crystals

We show graphene oxide (GO) greatly suppresses the growth and recrystallization of ice crystals, and ice crystals display a hexagonal shape in the GO dispersion. Preferred adsorption of GO on the ice crystal surface in liquid water leads to curved ice crystal surface. Therefore, the growth of ice crystal is suppressed owing to the Gibbs–Thompson effect, that is, the curved surface lowers the freezing temperature. Molecular dynamics simulation analysis reveals that oxidized groups on the basal plane of GO form more hydrogen bonds with ice in comparison with liquid water because of the honeycomb hexagonal scaffold of graphene, giving a molecular‐level mechanism for controlling ice formation. Application of GO for cryopreservation shows that addition of only 0.01 wt % of GO to a culture medium greatly increases the motility (from 24.3 % to 71.3 %) of horse sperms. This work reports the control of growth of ice with GO, and opens a new avenue for the application of 2D materials.     

Covalent polymeric modification of graphene nanosheets via surface‐initiated single‐electron‐transfer living radical polymerization

Graphene nanosheets offer intriguing electronic, thermal, and mechanical properties and are expected to find a variety of applications in high‐performance nanocomposite materials. Dispersal of graphene nanosheets in polymer hosts and precise interface control are challenging due to their strong interlayer cohesive energy and surface inertia. Here, an efficient strategy is presented for growing polymers directly from the surface of reduced graphene oxide (GO). This method involves the covalent attachment of Br‐containing initiating groups onto the surface of hydrazine hydrate reduced GO via a diazonium addition and the succeeding linking of poly(tert‐butyl methacrylate) (PtBMA) chains (71.7 wt % grafting efficiency) via surface‐initiated single‐electron‐transfer living radical polymerization (SET‐LRP) to graphene nanosheets. The resulting materials were characterized by using a range of testing techniques and it was proved that polymer chains were successfully introduced to the surface of exfoliated graphene sheets. After grafting with PtBMA, the modified graphene sheets still maintained the separated single layers, and the dispersibility was improved significantly. The method is believed to offer possibilities for optimizing the processing properties and interface structure of graphene–polymer nanocomposites. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Nanostructured Three‐Dimensional (3D) Assembly of 2D MoS2 and Graphene Directly Build From Acidic Graphite Oxide

A 3D highly interconnected macroporous network of reduced GO having finely dispersed few‐layered 2D MoS₂ nanosheets was constructed through direct use of acidic graphite oxide (GO) for the first time. This facile and technologically scalable process can afford efficient hydrodesulfurization electrocatalysts as potential anode materials at lower cost, and can circumvent the poor thermal stability and recyclability of the material. The strategy provided here can be the basis to design and develop practical processes to address the ultimate goal of large‐scale manufacturing of hybrids composed of 2D materials for various energy and catalysis applications.     

Laminar Graphene Oxide Membranes Towards Selective Ionic and Molecular Separations: Challenges and Progress

Resolution of resources and environmental crises requires an efficient separation technologies, consequently, scientists and engineers are working vigorously for ideal separation materials. Laminar graphene oxide (GO) is a two‐dimensional (2D) material offers considerable interest in this field due to its single atomic layer thickness, good stability, chemical inertness, and variety of functional groups. Recently, GO have emerged as a novel membrane material for molecular and ionic separation of gases, solvent, water, and desalination applications. This tutorial review aims to discuss the various approaches used to control the stacking of GO‐based membrane with emphasis of advantages and drawbacks associated with each approach. Further, attention will also be given to describe the recent progress in GO based membranes for ionic and molecular separations. Meanwhile, challenges and opportunities will also be discussed in detail. We hope this review expected to provide a compact source of information that will be of great interest to chemists, material scientists, physicists, and engineers working or planning to work in GO based membranes for separation applications.