Hyperbranched copolymer micelles as delivery vehicles of doxorubicin in breast cancer cells

Four types of drug nanoparticles (NPs) based on amphiphilic hyperbranched block copolymers were developed for the delivery of the chemotherapeutic doxorubicin (DOX) to breast cancer cells. These carriers have their hydrophobic interior layer composed of the hyperbranched aliphatic polyester, Boltorn^® H30 or Boltorn^® H40, that are polymers of poly 2,2‐bis (methylol) propionic acid (bis‐MPA), while the outer hydrophilic shell was composed of about 5 poly(ethylene glycol) (PEG) segments of 5 or 10 kDa molecular weight. A chemotherapeutic drug DOX, was further encapsulated in the interior of these polymer micelles and was shown to exhibit a controlled release profile. Dynamic light scattering and transmission electron microscopy analysis confirmed that the NPs were uniformly sized with a mean hydrodynamic diameter around 110 nm. DOX‐loaded H30‐PEG10k NPs exhibited controlled release over longer periods of time and greater cytotoxicity compared with the other materials developed against our tested breast cancer cell lines. Additionally, flow cytometry and confocal scanning laser microscopy studies indicated that the cancer cells could internalize the DOX‐loaded H30‐PEG10k NPs, which contributed to the sustained drug release, and induced more apoptosis than free DOX did. These findings indicate that the H30‐PEG10k NPs may offer a very promising approach for delivering drugs to cancer cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Target‐Specific Capture of Environmentally Relevant Gaseous Aldehydes and Carboxylic Acids with Functional Nanoparticles

Aldehyde and carboxylic acid volatile organic compounds (VOCs) present significant environmental concern due to their prevalence in the atmosphere. We developed biodegradable functional nanoparticles comprised of poly(d,l ‐lactic acid)‐poly(ethylene glycol)‐poly(ethyleneimine) (PDLLA‐PEG‐PEI) block co‐polymers that capture these VOCs by chemical reaction. Polymeric nanoparticles (NPs) preparation involved nanoprecipitation and surface functionalization with branched PEI. The PDLLA‐PEG‐PEI NPs were characterized by using TGA, IR, ¹H NMR, elemental analysis, and TEM. The materials feature 1°, 2°, and 3° amines on their surface, capable of capturing aldehydes and carboxylic acids from gaseous mixtures. Aldehydes were captured by a condensation reaction forming imines, whereas carboxylic acids were captured by acid/base reaction. These materials reacted selectively with target contaminants obviating off‐target binding when challenged by other VOCs with orthogonal reactivity. The NPs outperformed conventional activated carbon sorbents.     

Enzymatic bioactivity investigation of glucose oxidase modified with hydrophilic or hydrophobic polymers via in situ RAFT polymerization

Biomacromolecules, such as enzymes are widely used for biocatalysis, both at academic and industrial level, due to their high specificity and wide applications in different reaction media. Herein, taking GOx as a representative enzyme, in‐situ RAFT polymerization of four different monomers including acrylic acid (AA), methyl acrylate (MA), poly (ethylene glycol) acrylate (PEG‐A) and tert‐butyl acrylate (TBA) were polymerized directly on the surface of GOx to afford GOx‐poly (PEG‐A)(GOx‐PPEG‐A), GOx‐poly(MA)(GOx‐PMA), GOx‐poly(AA)(GOx‐PAA), and GOx‐poly(TBA)(GOx‐PTBA) conjugates, respectively. Thereinto, PAA and PPEG‐A represent the hydrophilic polymers, while PMA and PTBA stand for the hydrophobic ones. Effects of different polymer on the properties of GOx were investigated by measuring the bioactivity and stability of the as‐prepared and different GOx‐polymer conjugates. Higher bioactivity was obtained for GOx modified with hydrophilic polymers compared with that modified with hydrophobic ones. All the tested polymers can enhance the stability of the GOx, while the hydrophobic GOx‐polymers conjugates exhibited much better stability than the hydrophilic ones. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1289–1293     

Chemical Design of Non‐Ionic Polymer Brushes as Biointerfaces: Poly(2‐oxazine)s Outperform Both Poly(2‐oxazoline)s and PEG

The era of poly(ethylene glycol) (PEG) brushes as a universal panacea for preventing non‐specific protein adsorption and providing lubrication to surfaces is coming to an end. In the functionalization of medical devices and implants, in addition to preventing non‐specific protein adsorption and cell adhesion, polymer‐brush formulations are often required to generate highly lubricious films. Poly(2‐alkyl‐2‐oxazoline) (PAOXA) brushes meet these requirements, and depending on their side‐group composition, they can form films that match, and in some cases surpass, the bioinert and lubricious properties of PEG analogues. Poly(2‐methyl‐2‐oxazine) (PMOZI) provides an additional enhancement of brush hydration and main‐chain flexibility, leading to complete bioinertness and a further reduction in friction. These data redefine the combination of structural parameters necessary to design polymer‐brush‐based biointerfaces, identifying a novel, superior polymer formulation.     

Microporous structure and drug release kinetics of polymeric nanoparticles

The aim of the present study was to characterize pegylated nanoparticles (NPs) for their microporosity and study the effect of microporosity on drug release kinetics. Blank and drug-loaded NPs were prepared from three different pegylated polymers, namely, poly(ethylene glycol)1%-graft-poly(D,L)-lactide, poly(ethylene glycol)5%-graft-poly(D,L)-lactide, and the multiblock copolymer (poly(D,L)-lactide-block-poly(ethylene glycol)-block-poly(D,L)-lactide)n. These NPs were characterized for their microporosity using nitrogen adsorption isotherms. NPs of the multiblock copolymer showed the least microporosity and Brunauer-Emmett-Teller (BET) surface area, and that of PEG1%-g-PLA showed the maximum. Based on these results, the structural organization of poly(D,L)-lactide (PLA) and poly(ethylene glycol) (PEG) chains inside the NPs was proposed and was validated with differential scanning calorimetry (DSC) and X-ray photoelectron spectroscopy (XPS) surface analysis. An in vitro drug release study revealed that PEG1%-g-PLA NPs exhibited slower release despite their higher surface area and microporosity. This was attributed to the presence of increased microporosity forming tortuous internal structures, thereby hindering drug diffusion from the matrix. Thus, it was concluded that the microporous structure of NPs, which is affected by the molecular architecture of polymers, determines the release rate of the encapsulated drug.     

pH‐responsive squeezing polysaccharidic nanogels for efficient docetaxel delivery

In this study, we report pH‐responsive polysaccharidic nanogels comprising starch grafted with 3‐(diethylamino)propylamine (DEAP, as an inner soft nanogel core) and poly(ethylene glycol) (PEG, as an outer hydrophilic nanogel shell). Here, the DEAP moieties (pK_b ~ pH 7.0) enhance the lipophilicity of the nanogel core at pH 7.4, improving the loading efficiency of an antitumor model drug (docetaxel [DTX]) in the core. However, the DEAP moieties could be protonated below pH 7.0, resulting in the mediation of ion‐dipole interactions with hydroxyl groups abundant in starch backbone. This event causes the electrostatic condensation of the nanogel core and enables the acceleration of drug release by squeezing of the core. We demonstrated that the nanogels selectively release the drug given a weakly acidic pH stimulus. These drug release trends are reversible with changes in pH. As a result, the nanogels are able to efficiently reduce MDA‐MB‐231 tumor cell population in acidic pH environments.     

Preparation of Fluorescent Organometallic Porphyrin Complex Nanogels of Controlled Molecular Structure via Reverse‐Emulsion Click Chemistry

Here, we are the first to report a novel approach to preparing well‐defined poly(ethylene glycol) (PEG) fluorescent nanogels, with well‐defined molecular structures and desired functionalities via reverse (mini)emulsion copper(I)‐catalyzed azide‐alkyne cycloaddition (REM‐CuAAC). Nanogels with hydroxyl groups and Ga‐porphyrin complex (Ga‐porphyrin‐OH nanogels), as well as with Ga‐porphyrin complex and folate functional groups (Ga‐porphyrin‐FA), are successfully prepared. Nanogels of 30 and 120 nm in diameter are obtained and they exhibit an emission maxima within the wavelength range 700–800 nm. The nanogels could find uses in near infrared (NIR) imaging attributable to their fluorescence and their functionality for cell affinity.     

Hydrophilicity Regulates the Stealth Properties of Polyphosphoester‐Coated Nanocarriers

Increasing the plasma half‐life is an important goal in the development of drug carriers, and can be effectively achieved through the attachment of polymers, in particular poly(ethylene glycol) (PEG). While the increased plasma half‐life has been suggested to be a result of decreased overall protein adsorption on the hydrophilic surface in combination with the adsorption of specific proteins, the molecular reasons for the success of PEG and other hydrophilic polymers are still widely unknown. We prepared polyphosphoester‐coated nanocarriers with defined hydrophilicity to control the stealth properties of the polymer shell. We found that the log P value of the copolymer controls the composition of the protein corona and the cell interaction. Upon a significant change in hydrophilicity, the overall amount of blood proteins adsorbed on the nanocarrier remained unchanged, while the protein composition varied. This result underlines the importance of the protein type for the protein corona and cellular uptake.     

A New Approach for the Synthesis of Miktoarm Star Polymers Through a Combination of Thiol–Epoxy “Click” Chemistry and ATRP/Ring‐Opening Polymerization Techniques

A new approach was developed for synthesis of certain A₃B₃‐type of double hydrophilic or amphiphilic miktoarm star polymers using a combination of “grafting onto” and “grafting from” methods. To achieve the synthesis of desired miktoarm star polymers, acetyl protected poly(ethylene glycol) (PEG) thiols (M_n = 550 and 2000 g mol^?1) were utilized to generate A₃‐type of homoarm star polymers through an in situ protective group removal and a subsequent thiol–epoxy “click” reaction with a tris‐epoxide core viz. 1,1,1‐tris(4‐hydroxyphenyl)ethane triglycidyl ether. The secondary hydroxyl groups generated adjacent to the core upon the thiol–epoxy reaction were esterified with α‐bromoisobutyryl bromide to install atom transfer radical polymerization (ATRP) initiating sites. ATRP of N‐isopropylacrylamide (NIPAM) using the three‐arm star PEG polymer fitted with ATRP initiating sites adjacent to the core afforded A₃B₃‐type of double hydrophilic (PEG)₃[poly(N‐isopropylacrylamide)] (PNIPAM)₃ miktoarm star polymers. Furthermore, the generated hydroxyl groups were directly used as initiator for ring‐opening polymerization of ε‐caprolactone to prepare A₃B₃‐type of amphiphilic (PEG)₃[poly(ε‐caprolactone)]₃ miktoarm star polymers. The double hydrophilic (PEG)₃(PNIPAM)₃ miktoarm star polymers showed lower critical solution temperature around 34 °C. The preliminary transmission electron microscopy analysis indicated formation of self‐assembly of (PEG)₃(PNIPAM)₃ miktoarm star polymer in aqueous solution. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 146–156     

Micelle formation and sol–gel transition behavior of comb‐like amphiphilic poly((PLGA‐b‐PEG)MA) copolymers

Comb‐like amphiphilic poly(poly((lactic acid‐co‐glycolic acid)‐block‐poly(ethylene glycol)) methacrylate (poly((PLGA‐b‐PEG)MA)) copolymers were synthesized by radical polymerization. (PLGA‐b‐PEG)MA macromonomer was prepared by ring‐opening bulk polymerization of DL ‐lactide and glycolide using purified poly(ethylene glycol) monomethacrylate (PEGMA) as an initiator. (PLGA‐b‐PEG)MA macromonomer was copolymerized with PEGMA and/or acrylic acid (AA) by radical polymerization to produce comb‐like amphiphilic block copolymers. The molecular weight and chemical structure were investigated by GPC and ¹H NMR. Poly((PLGA‐b‐PEG)MA) copolymer aqueous solutions showed gel–sol transition behavior with increasing temperature, and gel‐to‐sol transition temperature decreased as the compositions of the hydrophilic PEGMA and AA increased. The gel‐to‐sol transition temperature of the terpolymers of the poly((PLGA‐b‐PEG)MA‐co‐PEGMA‐co‐AA) also decreased when the pH was increased. The effective micelle diameter obtained from dynamic light scattering increased with increasing temperature and with increasing pH. The critical micelle concentration increased as the composition of the hydrophilic monomer component, PEGMA and AA, were increased. The spherical shape of the hyperbranched polymers in aqueous environment was observed by atomic force microscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1954–1963, 2008     

Surfactant‐Free Emulsion‐Based Preparation of Redox‐Responsive Nanogels

A surfactant‐free emulsion‐based approach is developed for preparation of nanogels. A water‐in‐oil emulsion is generated feasibly from a mixture of water and a solution of disulfide‐containing hyperbranched PEGylated poly(amido amine)s, poly(BAC2‐AMPD1)‐PEG, in chloroform. The water droplets in the emulsion are stabilized and filled with poly(BAC2‐AMPD1)‐PEG, and the crosslinked poly(amido amine)s nanogels are formed via the intermolecular disulfide exchange reaction. FITC‐dextran is loaded within the nanogels by dissolving the compound in water before emulsification. Transmission electron microscopy and dynamic light scattering are applied to characterize the emulsion and the nanogels. The effects of the homogenization rate and the ratio of water/polymer are investigated. Redox‐induced degradation and FITC‐dextran release profile of the nanogels are monitored, and the results show efficient loading and redox‐responsive release of FITC‐dextran. This is a promising approach for the preparation of nanogels for drug delivery, especially for neutral charged carbohydrate‐based drugs.

     

Protein resistance of polyurethane with hydrophilic and hydrophobic soft segments

Polyurethane (PU) containing poly(propylene glycol) (PPG) or poly(tetramethylene oxide) (PTMG) soft segments have been prepared by two‐step condensation polymerization. The former (PPG‐PU) with a lower critical solution temperature (LCST) at ～21 °C can change from hydrophilic to hydrophobic, whereas the latter (PTMG‐PU) is hydrophobic at a temperature above 0 °C. The adsorption of fibrinogen, bovine serum albumin, or lysozyme on such a PU surface in aqueous solution has been investigated by use of quartz crystal microbalance with dissipation (QCM‐D) and surface plasmon resonance (SPR) in real time. PPG‐PU surface exhibits protein resistance at a temperature below the LCST of PPG, but it significantly adsorbs proteins at a temperature above the LCST. On the other hand, the hydrophobic PTMG‐PU surface adsorb the proteins at any temperatures investigated, in contrast with the hydrated poly(ethylene glycol) exhibiting excellent protein resistance. The hydration and dehydration of the polymers at different temperatures were confirmed by Raman spectroscopy. Our study demonstrates that the protein resistance of polymers is determined by their hydration. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1987–1993, 2010     

Preparation of hybrid triple‐stimuli responsive nanogels based on poly(L‐histidine)

A series of novel multi‐responsive disulfide cross‐linked polypeptide nanogels has been synthesized by a one‐step ring‐opening polymerization process. The pH‐responsive core of the prepared nanogels was based on poly(L‐histidine), the difunctional N‐carboxy anhydride of l ‐cystine (l ‐Cys‐NCA) was used as a reduction‐cleavable cross‐linking agent, while the outer hydrophilic corona was comprised of a poly(ethylene oxide) block. Extensive molecular characterization studies were conducted in order to confirm the formation of the desired polymeric nanostructures and also to prove their responsiveness to external stimuli within the physiological values of healthy and cancer tissues. Furthermore, the disruption of the disulfide‐bond linkages between the polymeric chains was achieved by the presence of the reductive tripeptide glutathione (GSH), leading to size variations that were monitored by dynamic light scattering (DLS) and size‐exclusion chromatography (SEC). “Stealth” properties of the formed nanostructures were examined by zeta potential measurements. The described nanogels are clearly promising candidates for drug delivery applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1278–1288     

Oligonucleotide loaded polypeptide‐peptide nanoparticles towards mitochondrial‐targeted delivery

Nanoparticles (NPs) consisting of biodegradable and biocompatible polymers may have the ability to deliver a cargo to specific tissue, cell type, and organelle. Various diseases, which are linked to mitochondrial genome (mtDNA) mutations and have no effective treatments, may be approached by gene therapy strategies. In this study, we adapted the recently developed mitochondria delivering polypeptide‐peptide nanoparticles (PoP‐NPs) system to carry an oligonucleotide cargo to the proximity of the mitochondria. PoP‐NPs are formulated by self‐assembly of the negatively charged polypeptide, poly gamma glutamic acid (γ‐PGA), with an amphiphilic and cationic β‐sheet peptide (PFK). Here, we show that PFK interacts favorably with oligonucleotides and thereby enables the formation of DNA‐loaded PoP‐NPs (DNA‐PoP‐NPs). DNA‐PoP‐NPs could be assembled with different peptide to oligonucleotide (N/P) ratios, and their targeting to the proximity of mitochondria in cell culture could be facilitated through NPs coating with PFK peptide.     

Comb‐Like Amphiphilic Polycarbonates with Different Lengths of Cationic Branches for Enhanced siRNA Delivery

Owing to the biodegradability and good biocompatibility polycarbonates show the versatile class of applications in biomedical fields. While their poor functional ability seriously limited the development of functional polycarbonates. Herein, a new Br‐containing cyclic carbonate (MTC‐Br) and a polycarbonate atom transfer radical polymerization (ATRP) macro‐initiator (PEG‐PMTC‐Br) is synthesized. Then, by initiating the side‐chain ATRP of 2‐(dimethyl amino)ethyl methacrylate (DMAEMA) on PEG‐PMTC‐Br, a series of comb‐like amphiphilic cationic polycarbonates, PEG‐b‐(PMTC‐g‐PDMAEMA) (GMDMs), with different lengths of cationic branches are successfully prepared. All these poly(ethylene glycol)‐b‐(poly((5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐yl) methyl 2‐bromo‐2‐methylpropanoate/1,3‐dioxane‐2‐one)‐g‐poly(2‐dimethyl aminoethyl methacrylate) (GMDMs) self‐assembled nanoparticles (NPs) (≈180 nm, +40 mV) can well bind siRNA to form GMDM/siRNA NPs. The gene silence efficiency of GMDM/siRNA high to 80%, which is even higher than the commercial transfection reagent lipo2000 (76%). But GMDM/siRNA shows lower cell uptake than lipo2000. So, the high gene silence ability of GMDM/siRNA NPs can be attributed to the strong intracellular siRNA trafficking capacity. Therefore, GMDM NPs are potential siRNA vectors and the successful preparation of comb‐like polycarbonates also provides a facile way for diverse side‐chain functional polycarbonates, expanding the application of polycarbonates.     

Development of Poor Cell Adhesive Immersion Precipitation Membranes Based on Supramolecular Bis‐Urea Polymers

A variety of biomedical applications requires tailored membranes; fabrication through a mix‐and‐match approach is simple and desired. Polymers based on supramolecular bis‐urea (BU) moieties are capable of modular integration through directed non‐covalent stacking. Here, it is proposed that non‐cell adhesive properties can be introduced in polycaprolactone‐BU‐based membranes by the addition of poly(ethylene glycol) (PEG)‐BU during immersion precipitation membrane fabrication, while unmodified PEG is not retained in the membrane. PEG‐BU addition results in denser membranes with a similar pore size compared to pristine membranes, while PEG addition induces defect formation. Infrared spectroscopy and surface hydrophobicity measurements indicate that PEG‐BU is retained during membrane processing. Additionally, PEG‐BU incorporation successfully leads to poor cell adhesive surfaces. No evidence is observed to indicate PEG retention. The results obtained indicate that the BU system enables intimate mixing of BU‐modified polymers after processing. Collectively, the results provide the first steps toward BU‐based immersion precipitated supramolecular membranes for biomedical applications.     

Protein adhesion on silicon-supported hyperbranched poly(ethylene glycol) and poly(allylamine) thin films

Hyperbranching poly(allylamine) (PAAm) and poly(ethylene glycol) (PEG) on silicon and its effect on protein adhesion was investigated. Hyperbranching involves sequential grafting of polymers on a surface with one of the components having multiple reactive sites. In this research, PAAm provided multiple amines for grafting PEG diacrylate. Current methodologies for generating PEG surfaces include PEG-silane monolayers or polymerized PEG networks. Hyperbranching combines the nanoscale thickness of monolayers with the surface coverage afforded by polymerization. A multistep approach was used to generate the silicon-supported hyperbranched polymers. The silicon wafer surface was initially modified with a vinyl silane followed by oxidation of the terminal vinyl group to present an acid function. Carbodiimide activation of the surface carboxyl group allowed for coupling to PAAm amines to form the first polymer layer. The polymers were hyperbranched by grafting alternating PEG and PAAm layers to the surface using Michael addition chemistry. The alternating polymers were grafted up to six total layers. The substrates remained hydrophilic after each modification. Static contact angles for PAAm (32-44 degrees) and PEG (33-37 degrees) were characteristic of the corresponding individual polymer (30-50 degrees for allylamine, 34-42 degrees for PEG). Roughness values varied from approximately 1 to 8 nm, but had no apparent affect on protein adhesion. Modifications terminating with a PEG layer reduced bovine serum albumin adhesion to the surface by approximately 80% as determined by ELISA and radiolabel binding studies. The hyperbranched PAAm and PEG surfaces described in this paper are nanometer-scale, multilayer films capable of reducing protein adhesion.     

Tailored Synthesis of Octopus‐type Janus Nanoparticles for Synergistic Actively‐Targeted and Chemo‐Photothermal Therapy

A facile, reproducible, and scalable method was explored to construct uniform Au@poly(acrylic acid) (PAA) Janus nanoparticles (JNPs). The as‐prepared JNPs were used as templates to preferentially grow a mesoporous silica (mSiO₂) shell and Au branches separately modified with methoxy‐poly(ethylene glycol)‐thiol (PEG) to improve their stability, and lactobionic acid (LA) for tumor‐specific targeting. The obtained octopus‐type PEG‐Au‐PAA/mSiO₂‐LA Janus NPs (PEG‐OJNP‐LA) possess pH and NIR dual‐responsive release properties. Moreover, DOX‐loaded PEG‐OJNP‐LA, upon 808 nm NIR light irradiation, exhibit obviously higher toxicity at the cellular and animal levels compared with chemotherapy or photothermal therapy alone, indicating the PEG‐OJNP‐LA could be utilized as a multifunctional nanoplatform for in vitro and in vivo actively‐targeted and chemo‐photothermal cancer therapy.     

Polymerization of oligo(ethylene glycol) (meth)acrylates: Toward new generations of smart biocompatible materials

Monomers composed of a (meth)acrylate moiety connected to a short poly(ethylene)glycol (PEG) chain are versatile building‐blocks for the preparation of “smart” biorelevant materials. Many of these monomers are commercial and can be easily polymerized by either anionic, free‐radical, or controlled radical polymerization. The latter approach allows synthesis of well‐defined PEG‐based macromolecular architectures such as amphiphilic block copolymers, dense polymer brushes, or biohybrids. Furthermore, the resulting polymers exhibit fascinating solution properties in aqueous medium. Depending on the molecular structure of their monomer units, non linear PEG analogues can be either insoluble in water, readily soluble up to 100 °C, or thermoresponsive. Thus, these polymers can be used for building a wide variety of modern materials such as biosensors, artificial tissues, smart gels for chromatography, and drug carriers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3459–3470, 2008     

Synthesis of PEG‐PNIPAM‐PLys hetero‐arm star polymer and its variation of thermo‐responsibility after the formation of polyelectrolyte complex micelles with PAA

A hetero‐arm star polymer, poly(ethylene glycol)‐poly(N‐isopropylacrylamide)‐poly(L‐lysine) (PEG‐PNIPAM‐PLys), was synthesized by “clicking” the azide group at the junction of PEG‐b‐PNIPAM diblock copolymer with the alkyne end‐group of poly(L‐lysine) (PLys) homopolymer via 1,3‐dipolar cycloaddition. The resultant polymer was characterized by gel permeation chromatography, proton nuclear magnetic resonance, and Fourier transform infrared spectroscopes. Surprisingly, the PNIPAM arm of this hetero‐arm star polymer nearly lose its thermal responsibility. It is found that stable polyelectrolyte complex micelles are formed when mixing the synthesized polymer with poly(acrylic acid) (PAA) in water. The resultant polyelectrolyte complex micelles are core‐shell spheres with the ion‐bonded PLys/PAA chains as core and the PEG and PNIPAM chains as shell. The PNIPAM shell is, as expected, thermally responsive. However, its lower critical solution temperature is shifted to 37.5 °C, presumably because of the existence of hydrophilic components in the micelles. Such star‐like PEG‐PNIPAM‐PLys polymer with different functional arms as well as its complexation with anionic polymers provides an excellent and well‐defined model for the design of nonviral vectors to deliver DNA, RNA, and anionic molecular medicines. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1450–1462, 2009