Farbeffekte in oxidischen and anderen Mn2+-Verbindungen – die Ligandenfeldspektren von MgO/MnO- und CaO/MnO-Mischkristallen sowie von MnAl2O4

Colour Effects in Oxidic and Other Mn²⁺ Compounds – the Ligand Field Spectra of Mixed Crystals MgO/MnO, CaO/MnO, and of MnAl₂O₄ The colour intensity and the shift of the hue is examined for mixed crystals Mg_1?xMn_x^IIO and Mn_1?y^IICa_yO in dependence of the Mn²⁺-concentration and interpreted in terms of Mn²⁺? Mn²⁺ pair interactions and variations of the Mn? O bond length, respectively. The experimental band positions (sextet-quartet transitions) could be fitted quantitatively – also in case of Mn²⁺ in tetrahedral (MnAl₂O₄) and dodecahedral oxygen coordination (Mn₃Al₂Ge₃O₁₂, MnY₂Mg₂Ge₃O₁₂) – by means of crystal field calculations. The obtained ligand field parameters are discussed in comparison with data for octahedral Mn²⁺ ions with H₂O, F^? and Cl^? as ligands.     

Color Point Tuning in Lu3−x−yMnxAl5−xSixO12:yCe3+ for White LEDs

A series of the solid‐solution phosphors Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ is synthesized by solid‐state reaction. The obtained phosphors possess the garnet structure and exhibit similar excitation properties as the phosphor Lu₃Al₅O₁₂:Ce³⁺, but with an effectively improved red component in the emission spectrum. This can be attributed to the energy transfer from Ce³⁺ to Mn²⁺. Our investigation reveals that electric dipole–quadrupole interactions dominate the energy‐transfer mechanism and that the critical distance determined by the spectral overlap method is about 9.21 Å. The color‐tunable emissions of the Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ phosphor as a function of Mn₃Al₂Si₃O₁₂ content are realized by continuously shifting the chromaticity coordinates from (0.354, 0.570) to (0.462, 0.494). They indicate that the obtained material may have potential application as a blue radiation‐converting phosphor for white LEDs with high‐quality white light.     

Properties and Structure of Spinel Li‐Mn‐O‐F Compounds for Cathode Materials of Secondary Lithium‐ion Battery

The spinel Li‐Mn‐O‐F compound cathode materials were synthesized by solid‐state reaction from calculated amounts LiOH‐H₂O, MnO₂(EMD) and LiF. The results of the electrochemical test demonstrated that these materials exhibited excellent electrochemical properties. It's initial capacity is ‐ 115 mAh.g¹ and reversible efficiency is about 100%. After 60 cycles, its capacity is still around 110 mAh.g¹ with nearly 100% reversible efficiency. The spinel Li‐Mn‐O‐F compound possibly has two structure models: interstitial model [Li]‐[Mn³⁺_xMn⁴⁺_2‐x]O₄F_δ, in which the fluorine is located on the interstice of crystal lattice, and substituted model [Li]‐[Mn³⁺_xMn⁴⁺_2‐x]O_4‐δF_δ, which the fluorine atom substituted the oxygen atom. The electrochemical result supports the interstitial model [Li][Mn³⁺_xMn⁴⁺_2‐x]O₄F_δ.     

Eu2+ & Mn2+‐Coactivated Ba3Gd(PO4)3 Orange‐Yellow‐Emitting Phosphor with Tunable Color Tone for UV‐Excited White LEDs

A novel orange‐yellow‐emitting Ba₃Gd(PO₄)₃:x Eu²⁺,y Mn²⁺ phosphor is prepared by high‐temperature solid‐state reaction. The crystal structure of Ba₃Gd(PO₄)₃:0.005 Eu²⁺,0.04 Mn²⁺ is determined by Rietveld refinement analysis on powder X‐ray diffraction data, which shows that the cations are disordered on a single crystallographic site and the oxygen atoms are distributed over two partially occupied sites. The photoluminescence excitation spectra show that the developed phosphor has an efficient broad absorption band ranging from 230 to 420 nm, perfectly matching the characteristic emission of UV‐light emitting diode (LED) chips. The emission spectra show that the obtained phosphors possess tunable color emissions from yellowish‐green through yellow and ultimately to reddish‐orange by simply adjusting the Mn²⁺ content (y) in Ba₃Gd(PO₄)₃:0.005 Eu²⁺,y Mn²⁺ host. The tunable color emissions origin from the change in intensity between the 4f–5d transitions in the Eu²⁺ ions and the ⁴T₁‐⁶A₁ transitions of the Mn²⁺ ions through the energy transfer from the Eu²⁺ to the Mn²⁺ ions. In addition, the mechanism of the energy transfer between the Eu²⁺ and Mn²⁺ ions are also studied in terms of the Inokuti–Hirayama theoretical model. The present results indicate that this novel orange‐yellow‐emitting phosphor can be used as a potential candidate for the application in white LEDs.     

Effect of External Pressure on the Excitation Energy Transfer from [Cr(ox)3]3− to [Cr(bpy)3]3+ in [Rh1−xCrx(bpy)3][NaM1−yCry(ox)3]ClO4

Resonant excitation energy transfer from [Cr(ox)₃]^3? to [Cr(bpy)₃]³⁺ in the doped 3D oxalate networks [Rh_1?xCr_x(bpy)₃][NaM^III_1?yCr_y(ox)₃]ClO₄ (ox=C₂O₄^?, bpy=2,2′‐bipyridine, M=Al, Rh) is due to two types of interaction, namely super exchange coupling and electric dipole–dipole interaction. The energy transfer probability for both mechanisms is proportional to the spectral overlap of the ²E→⁴A₂ emission of the [Cr(ox)₃]^3? donor and the ⁴A₂→²T₁ absorption of the [Cr(bpy)₃]³⁺ acceptor. The spin‐flip transitions of (pseudo‐)octahedral Cr³⁺ are known to shift to lower energy with increasing pressure. Because the shift rates of the two transitions in question differ, the spectral overlap between the donor emission and the acceptor absorption is a function of applied pressure. For [Rh_1?xCr_x(bpy)₃][NaM_1?yCr_y(ox)₃]ClO₄ the spectral overlap is thus substantially reduced on increasing pressure from 0 to 2.5 GPa. As a result, the energy transfer probability decreases with increasing pressure as evidenced by a decrease in the relative emission intensity from the [Cr(bpy)₃]³⁺ acceptor.     

Superior Na‐Storage Performance of Low‐Temperature‐Synthesized Na3(VO1−xPO4)2F1+2x (0≤x≤1) Nanoparticles for Na‐Ion Batteries

Na‐ion batteries are becoming comparable to Li‐ion batteries because of their similar chemical characteristics and abundant sources of sodium. However, the materials production should be cost‐effective in order to meet the demand for large‐scale application. Here, a series of nanosized high‐performance cathode materials, Na₃(VO_1?xPO₄)₂F_1+2x (0≤x≤1), has been synthesized by a solvothermal low‐temperature (60–120 °C) strategy without the use of organic ligands or surfactants. The as‐synthesized Na₃(VOPO₄)₂F nanoparticles show the best Na‐storage performance reported so far in terms of both high rate capability (up to 10 C rate) and long cycle stability over 1200 cycles. To the best of our knowledge, the current developed synthetic strategy for Na₃(VO_1?xPO₄)₂F_1+2x is by far one of the least expensive and energy‐consuming methods, much superior to the conventional high‐temperature solid‐state method.     

Relationships between luminescent properties and structure in β-K2SO4-type orthophosphates

The conditions of a Ce³⁺ → Tb³⁺ energy transfer have been analyzed in the Na_2+x+yCa_2(1?x?y) Ce_xTb_y(PO₄)₂ orthophosphates. Terbium green emission through uv cerium excitation is characterized by a very low yield. This result is the consequence of a sodium-rare-earth short range ordering even at low rare-earth concentrations and of lack of rigidity in the anionic sublattice.     

P2‐Na0.67AlxMn1−xO2: Cost‐Effective,Stable and High‐Rate Sodium Electrodes by Suppressing Phase Transitions and Enhancing Sodium Cation Mobility

Sodium layered P2‐stacking Na_0.67MnO₂ materials have shown great promise for sodium‐ion batteries. However, the undesired Jahn–Teller effect of the Mn⁴⁺/Mn³⁺ redox couple and multiple biphasic structural transitions during charge/discharge of the materials lead to anisotropic structure expansion and rapid capacity decay. Herein, by introducing abundant Al into the transition‐metal layers to decrease the number of Mn³⁺, we obtain the low cost pure P2‐type Na_0.67Al_xMn_1?xO₂ (x=0.05, 0.1 and 0.2) materials with high structural stability and promising performance. The Al‐doping effect on the long/short range structural evolutions and electrochemical performances is further investigated by combining in situ synchrotron XRD and solid‐state NMR techniques. Our results reveal that Al‐doping alleviates the phase transformations thus giving rise to better cycling life, and leads to a larger spacing of Na⁺ layer thus producing a remarkable rate capability of 96 mAh g^‐1 at 1200 mA g^‐1.     

Novel tantalum phosphate Na13Sr2Ta2(PO4)9: synthesis,crystal structure,DFT calculations and Dy3+‐activated fluorescence performance

A new tantalum phosphate, tridecasodium distrontium ditantalum nonaphosphate, Na₁₃Sr₂Ta₂(PO₄)₉, was prepared using the high‐temperature flux method. The structure can be described as a three‐dimensional open framework containing isolated [Ta^V₂(PO₄)₉]¹⁷⁻ units that are interlocked by Na and Sr ions. Band structure studies by the first‐principles method revealed that Na₁₃Sr₂Ta₂(PO₄)₉ is an insulator with an indirect band gap of 4.78 eV, which makes it suitable as a luminescent host matrix. A series of solid solutions, i.e. Na₁₃Sr_2–xTa₂(PO₄)₉:xDy³⁺ (x = 0.01, 0.02, 0.04, 0.06, 0.08, 0.1, 0.12 and 0.14), were prepared and their photoluminescence properties studied. Under 350 nm light excitation, these emit two typical emissions of the Dy³⁺ ion, i.e. the ⁴F_9/2→⁶H_15/2 transition centred at 476 nm and the ⁴F_9/2→⁶H_13/2 transition centred at 570 nm.     

P2‐Na0.67AlxMn1−xO2: Cost‐Effective,Stable and High‐Rate Sodium Electrodes by Suppressing Phase Transitions and Enhancing Sodium Cation Mobility

Sodium layered P2‐stacking Na_0.67MnO₂ materials have shown great promise for sodium‐ion batteries. However, the undesired Jahn–Teller effect of the Mn⁴⁺/Mn³⁺ redox couple and multiple biphasic structural transitions during charge/discharge of the materials lead to anisotropic structure expansion and rapid capacity decay. Herein, by introducing abundant Al into the transition‐metal layers to decrease the number of Mn³⁺, we obtain the low cost pure P2‐type Na_0.67Al_xMn_1?xO₂ (x=0.05, 0.1 and 0.2) materials with high structural stability and promising performance. The Al‐doping effect on the long/short range structural evolutions and electrochemical performances is further investigated by combining in situ synchrotron XRD and solid‐state NMR techniques. Our results reveal that Al‐doping alleviates the phase transformations thus giving rise to better cycling life, and leads to a larger spacing of Na⁺ layer thus producing a remarkable rate capability of 96 mAh g^‐1 at 1200 mA g^‐1.     

Synthesis and Structure of the new Fluoride Bromide Ba6.668(2)Ca0.332(2)F12Br2 and Solid Solutions with Composition Ba7−xCaxF12(ClyBr1−y)2 with x = ∼0.5, 0 < y < 1

Crystals of the chemical composition Ba₇F₁₂Cl₂ were modified by adding a small amount of Ca²⁺ to allow the synthesis of the corresponding bromine compound Ba^[Ca]₇F₁₂Br₂. These samples were prepared in a NaBr flux and characterized by single crystal x‐ray diffraction. The new structure crystallizes in a disordered arrangement in the hexagonal space group P6₃/m (176). The calcium ion has a coordination number of 6. Solid solutions on the heavy halide position can be synthesised in a NaCl/NaBr flux to obtain the compounds Ba_7?xCa_xF₁₂(Cl_yBr_1?y)₂ with x = ～0.5 and 0 < y < 1. Regardless the amount of calcium used in the preparation process, the Ca stoichiometry in the compound is always between 0.3 and 0.5. The lattice parameters differ depending on the Ca‐ and Br‐content between 1053.81(5) ? a = b ? 1058.93(3) pm and 421.21 ? c ? 426.78(3) pm.     

The Sodium Antimony Telluridogermanate(III) Na9Sb[Ge2Te6]2

Systematic studies in the quaternary system Na/Ge/Sb/Te yielded the new compound Na₉Sb[Ge₂Te₆]₂. Its crystal structure is isotypic to Na₉Sb[Ge₂Se₆]₂ (space group C2/c with a = 9.541(2), b = 26.253(7), c = 7.5820(18) Å and β = 122.233(15)°, Z = 2). The structure is characterized by Ge–Ge dumbbells that are octahedrally coordinated by Te, forming ethane‐like [Ge₂Te₆]^6– anions. Cation sites are occupied by Na⁺ as well as shared by Na⁺ and Sb³⁺. Na₉Sb[Ge₂Te₆]₂ is formally obtained from the reaction of one equivalent Na₈[Ge₄Te₁₀] and one equivalent NaSbTe₂. In contrast to members of the metastable solid solution series (NaSbTe₂)_1–x(GeTe)_x, Na₉Sb[Ge₂Te₆]₂ is a thermodynamically stable compound. It is a semiconductor with a bandgap of 1.51 eV.     

Matrix-Inducing Synthesis of SrxY10?x(SiO4)y(PO4)6?yO2: Eu3+ Micron Crystalline Coral Like Phosphors by Sol-Gel Composition of Hybrid Precursors

In the context, Sr_xY_10−x(SiO₄)_y(PO₄)_6−yO₂ doped with 1 mol%Eu³⁺ (x = 2, y = 6; x = 4, y = 4; x = 5, y = 3; x = 8, y = 0) were synthesized by using 3-aminopropyl-triethoxysilane (APES) as the sources of the silicate network. X-ray diagrams confirm that Sr_xY_10−x(SiO₄) _y(PO₄)_6−yO₂: Eu³⁺ solid solutions are formed as a pure apatitic phase. The SEM picture shows that there exist some novel unexpected coral like morphological structures. The luminescent intensity is the strongest for the host composition of Sr₄Y₆(SiO₄)₄(PO₄)₂O₂ although the effect of the composition on the luminescent intensity is little.     

2D l‐Di‐toluoyl‐tartaric acid Lanthanide Coordination Polymers: Toward Single‐component White‐Light and NIR Luminescent Materials

A series of five l ‐di‐p‐toluoyl‐tartaric acid (l ‐DTTA) lanthanide coordination polymers, namely {[Ln₄K⁴ L₆(H₂O)_x]?yH₂O}_n, [Ln=Dy ( 1 ), x=24, y=12; Ln=Ho ( 2 ), x=23, y=12; Ln=Er ( 3 ), x=24, y=12; Ln=Yb ( 4 ), x=24, y=11; Ln=Lu ( 5 ), x=24, y=12] have been isolated by simple reactions of H₂L (H₂L= L ‐DTTA) with LnCl₃?6 H₂O at ambient temperature. X‐ray crystallographic analysis reveals that complexes 1 – 5 feature two‐dimensional (2D) network structures in which the Ln³⁺ ions are bridged by carboxylate groups of ligands in two unique coordinated modes. Luminescent spectra demonstrate that complex 1 realizes single‐component white‐light emission, while complexes 2 – 4 exhibit a characteristic near‐infrared (NIR) luminescence in the solid state at room temperature.     

Quaternary Germanides Formed in Molten Aluminum: Tb2NiAl4Ge2 and Ce2NiAl6‐xGe4‐y (x ∼ 0.24, y ∼ 1.34)

The intermetallic phases Tb₂NiAl₄Ge₂ and Ce₂NiAl_6‐xGe_4‐y (x ∼ 0.24, y ∼ 1.34) were synthesized in molten Al at temperatures below 1000 °C. Both compounds adopt the tetragonal space group I4/mmm with cell parameters of a= 4.1346(2) Å c = 19.3437(7) Å for Tb₂NiAl₄Ge₂ and a= 4.1951(9) Å and c = 26.524(7) Å for Ce₂NiAl_6‐xGe_4‐y. The Tb₂NiAl₄Ge₂ structure features NiAl₄Ge₂ layers separated by a double layer of rare earth ions. The Ce₂NiAl_6‐xGe_4‐y (x ∼ 0.24, y ∼ 1.34) structure also contains the NiAl₄Ge₂ layers along with a vacancy defect PbO‐type Al_2‐xGe_2‐y layer, and is related to the Ce₂NiGa₁₀ structure type. Ordering of vacancies cause the formation of a 3ax3b superstructure in the crystal as seen by electron diffraction experiments. Tb₂NiAl₄Ge₂ exhibits Curie‐Weiss paramagnetic behavior with an antiferromagnetic transition observed at ∼20 K. Ce₂NiAl_6‐xGe_4‐y shows a much more complex magnetic behavior possibly due to temperature induced variation in the valency of the Ce atoms.     

Atom Exchange Versus Reconstruction: (GexAs4−x)x− (x=2, 3) as Building Blocks for the Supertetrahedral Zintl Cluster [Au6(Ge3As)(Ge2As2)3]3−

The Zintl anion (Ge₂As₂)^2? represents an isostructural and isoelectronic binary counterpart of yellow arsenic, yet without being studied with the same intensity so far. Upon introducing [(PPh₃)AuMe] into the 1,2‐diaminoethane (en) solution of (Ge₂As₂)^2?, the heterometallic cluster anion [Au₆(Ge₃As)(Ge₂As₂)₃]^3? is obtained as its salt [K(crypt‐222)]₃[Au₆(Ge₃As)(Ge₂As₂)₃]?en?2 tol ( 1 ). The anion represents a rare example of a superpolyhedral Zintl cluster, and it comprises the largest number of Au atoms relative to main group (semi)metal atoms in such clusters. The overall supertetrahedral structure is based on a (non‐bonding) octahedron of six Au atoms that is face‐capped by four (Ge_xAs_4?x)^x? (x=2, 3) units. The Au atoms bind to four main group atoms in a rectangular manner, and this way hold the four units together to form this unprecedented architecture. The presence of one (Ge₃As)^3? unit besides three (Ge₂As₂)^2? units as a consequence of an exchange reaction in solution was verified by detailed quantum chemical (DFT) calculations, which ruled out all other compositions besides [Au₆(Ge₃As)(Ge₂As₂)₃]^3?. Reactions of the heavier homologues (Tt₂Pn₂)^2? (Tt=Sn, Pb; Pn=Sb, Bi) did not yield clusters corresponding to that in 1 , but dimers of ternary nine‐vertex clusters, {[AuTt₅Pn₃]₂}^4? (in 2 – 4 ; Tt/Pn=Sn/Sb, Sn/Bi, Pb/Sb), since the underlying pseudo‐tetrahedral units comprising heavier atoms do not tend to undergo the said exchange reactions as readily as (Ge₂As₂)^2?, according to the DFT calculations.     

Photoluminescence of Mn2+ in the Borosulfate Zn[B2(SO4)4] : Mn2+—A Tool to Detect Weak Coordination Behavior of Ligands

The impact of the surrounding ligand field is successfully exploited in the case of Eu²⁺ to tune the emission characteristics of inorganic photoactive materials with potential application in, e.g., phosphor-converted white light-emitting diodes (pc-wLEDs). However, the photoluminescence of Mn²⁺ related to intraconfigurational 3d⁵–3d⁵ transitions is also strongly dependent on local ligand field effects and has been underestimated in this regard so far. In this work, we want to revive the idea how to electronically tune the emission color of a transition metal ion in inorganic hosts by unusual electronic effects in the metal-ligand bond. The concept is explicitly demonstrated for the weakly coordinating layer-like borosulfate ligand in the Mn²⁺-containing solid solutions Zn_1-xMn_x[B₂(SO₄)₄] (x = 0, 0.03, 0.04, 0.05, 0.10). Zn[B₂(SO₄)₄]:Mn²⁺ shows orange narrow-band luminescence at 590 nm, which is an unusually short wavelength for octahedrally coordinated Mn²⁺ and indicates an uncommonly weak ligand field. On the other hand, the analysis of the interelectronic Racah repulsion parameters reveals ionic Mn−O bonds with values close to the Racah parameters of the free Mn²⁺ ion. Overall, this strategy demonstrates that electronic control of the metal-ligand bond can be a tool to make Mn²⁺ a potent alternative emitter to Eu²⁺ for inorganic phosphors.     

Magnetic “Molecular Oligomers” Based on Decametallic Supertetrahedra: A Giant Mn49 Cuboctahedron and its Mn25Na4 Fragment

Two nanosized Mn₄₉ and Mn₂₅Na₄ clusters based on analogues of the high‐spin (S=22) [Mn^III₆Mn^II₄(μ₄‐O)₄]¹⁸⁺ supertetrahedral core are reported. Mn₄₉ and Mn₂₅Na₄ complexes consist of eight and four decametallic supertetrahedral subunits, respectively, display high virtual symmetry (O_h), and are unique examples of clusters based on a large number of tightly linked high nuclearity magnetic units. The complexes also have large spin ground‐state values (Mn₄₉: S=61/2; Mn₂₅Na₄: S=51/2) with the Mn₄₉ cluster displaying single‐molecule magnet (SMM) behavior and being the second largest reported homometallic SMM.     

Site‐Specific Substitution Preferences in the Solid Solutions Li12Si7–xGex,Li12–yNaySi7, Na7LiSi8–zGez,and Li3NaSi6–vGev

The mixed silicide‐germanides Li₁₂Si_7–xGe_x, Na₇LiSi_8–zGe_z, and Li₃NaSi_6–vGe_v which could serve as potential precursors for Si_1–xGe_x materials were synthesized and characterized by X‐ray diffraction methods. The full solid solution series Li₁₂Si_7–xGe_x (0 ≤ x ≤ 7) is easily accessible from the elements and features preferential occupation of the more negatively charged crystallographic tetrel positions by Ge, which is the more electronegative element. In case of Na₇LiSi_8–zGe_z a broad solid solution range of 1.3 ≤ x ≤ 8 is available but the ternary silicide Na₇LiSi₈ could not be obtained by the tested methods of synthesis. The solubility of Ge in Li₃NaSi_6–vGe_v is highly limited to a maximum of v ≈ 0.5, and again the formally more negatively charged tetrel positions are preferred by Ge. Additionally, the two crystallographic Li positions in Li₁₂Si₇ with unusually large displacement parameters can be partially substituted by Na in Li_12–yNa_ySi₇ with 0 ≤ y ≤ 0.6. The statistical mixing of Li and Na in this solid solution contrasts the typical ordering of Li and Na in most ternary tetrelides.     

The Effect of Crystal Packing and ReIV Ions on the Magnetisation Relaxation of [Mn6]‐Based Molecular Magnets

The energy barrier to magnetisation relaxation in single‐molecule magnets (SMMs) proffers potential technological applications in high‐density information storage and quantum computation. Leading candidates amongst complexes of 3d metals ions are the hexametallic family of complexes of formula [Mn₆O₂(R‐sao)₆(X)₂(solvent)_y] (saoH₂=salicylaldoxime; X=mono‐anion; y=4–6; R=H, Me, Et, and Ph). The recent synthesis of cationic [Mn₆][ClO₄]₂ family members, in which the coordinating X ions were replaced with non‐coordinating anions, opened the gateway to constructing families of novel [Mn₆] salts in which the identity and nature of the charge balancing anions could be employed to alter the physical properties of the complex. Herein we demonstrate initial experiments to show that this is indeed possible. By replacing the diamagnetic ClO₄^? anions with the highly anisotropic Re^IV ion in the form of [Re^IVCl₆]^2?, the energy barrier to magnetisation relaxation is increased by up to 30 %.