散射光彩色数字全息光学系统及波面重建算法研究

令物体表面为散射面,参考光及重建光为球面波,详细研究了离轴数字全息物光场重建平面的光波场.导出物光、共轭物光及零级衍射光分布与光学系统参数的关系.根据彩色数字全息的特点,提出抑制零级衍射干扰的光学系统设计方法,并且对一种能够避免插值误差的波面重建算法进行了优化研究,给出了相应的实验证明.     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级干扰,提高重建像质量,一种方法利用空间光调制器相移技术在参考光中加入一次任意相移,记录两幅数字全息图,消除重建零级像|另一种方法使用“无干扰全息图”消除重建零级像及共轭像.本文讨论结果可为大物体彩色数字全息及多波长数字全息检测应用提供有益的参考.     

基于Hilbert变换实现数字全息高精度相位重建

为了提高数字全息相位重建精度,研究了基于Hilbert变换重建相位的理论和方法,并通过像面数字全息实验对该方法的有效性进行了验证,同时与数字全息常规重建方法得到的结果进行了比较.结果表明:Hilbert变换本身具有消除直流项的作用,对利用频域滤波滤除零级谱后的全息图进行Hilbert变换,能够彻底消除零级衍射项的干扰,从而提高相位重建精度.与常规重建结果相比,基于Hilbert变换的相位重建结果的标准偏差降低了14.0%.本文结果对提高数字全息相位重建精度具有重要的指导意义.     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级...     

彩色数字全息的非插值波面重建算法研究

彩色数字全息及多波长照明的数字全息检测研究中,避免插值误差的可变放大率波面重建是一个重要的研究内容.由于Fresnel衍射积分可以表示成Fourier变换及卷积两种形式,对应地存在两种波面重建算法：其一,将重建距离分为两段的衍射“接力”算法;其二,用球面波为重建波的卷积算法.文中对这两种算法进行理论分析及实验研究,讨论让重建计算满足取样定理的条件.结果表明,卷积算法较容易满足取样定理,能够获得较好的重建物光场. 关键词： 彩色数字全息 波面重建 衍射计算     

波前重建中的高通滤波消零级衍射干扰研究

根据可变放大率物光波前重建过程中球面波照射下数字全息图频谱的分析,提出在重建波照射前对全息图进行高通滤波消零级衍射干扰的方法.对物体表面为散射及非散射面情况的波前重建进行理论模拟及实验研究.结果表明,当物体表面是散射面时,可以获得有效消除干扰的重建图像,但是,当物体表面是光学平滑表面时,为得到完整的重建图像,要求将更为...     

基于有限脉冲响应滤波器的数字全息零级像消除

针对数字全息中零级像的存在影响数字再现像的质量,分析数字全息图的记录、再现原理及频谱特性,提出了一种利用有限脉冲响应滤波器消除全息图数字再现中零级像的方法.该方法只需记录一幅数字全息图,不需要相移器材或其他辅助设备,直接利用数字图像处理对数字全息图在空域进行预处理,消除全息再现时的零级像干扰.对比了数字模拟和实验拍摄到的全息图在应用有限脉冲响应滤波器消除零级像前后的再现结果,表明该方法可消除零级衍射像,改善重建像质量,并且算法简单.     

数字全息再现像中零级干扰噪声消除及图像增强研究

利用基于图像处理的微分梯度方法预先对数字全息图进行空间域的图像增强操作,可以达到消除全息再现时的零级衍射干扰的目的.它无需其它辅助设备或多次全息记录,是一种方便简洁的处理方法.在理论分析和数字再现结果中都表明,该方法不仅能够有效地消除零级衍射像,同时对于真实像的再现质量有着显著提高.     

菲涅耳数字全息成像系统的脉冲响应分析

数字全息成像由CCD记录数字全息图后经过计算机数值重建物光波场,这个过程从傅里叶变换角度看等同于数字全息图的频谱分析。讨论了数字成像系统的脉冲响应函数,并分别推导了其实像、虚像、零级像在平面波和球面波照射下的波前复振幅分布。结果表明,实像和虚像是移位的夫琅和费衍射分布,而零级像是CCD光瞳的菲涅耳衍射分布,且与参考光波前分布无关。     

彩色数字全息的非插值波面重建算法研究

彩色数字全息及多波长照明的数字全息检测研究中,避免插值误差的可变放大率波面重建是一个重要的研究内容.由于Fresnel衍射积分可以表示成Fourier变换及卷积两种形式,对应地存在两种波面重建算法：其一,将重建距离分为两段的衍射“接力”算法;其二,用球面波为重建波的卷积算法.文中对这两种算法进行理论分析及实验研究,讨论让重建计算满足取样定理的条件.结果表明,卷积算法较容易满足取样定理,能够获得较好的重建物光场.     

基于虚拟光波场的菲涅耳衍射计算及应用研究

为满足特定观测区域光波场的较高空间分辨率要求,提出一种在衍射计算中引入虚拟光波场,利用初始光波场的取样数表示观测平面任意区域衍射场的计算方法。通过应用该方法对具体实例进行模拟计算,结果表明该方法在观测区域所获得的有效信息量增加,所获得的衍射场空间分辨率可以达到5.2×10-3 mm/pixel,而S-FFT计算获得的衍射场空间分辨率为26.6×10-3 mm/pixel。并且在基于该方法的彩色数字全息波前重建的实验研究中,所得结果表明该方法能够取得更好的重建效果。     

近距离数字全息术记录和再现问题

讨论了记录距离小于菲涅耳衍射要求的近距离数字全息记录和再现问题。对全息记录与再现中高次相位的补偿问题进行了分析,证明了在CCD的参量和记录距离给定后,只要记录时使物体的大小、球面参考光波的位置和距离满足一定的条件,即使在记录距离小于菲涅耳衍射要求的最小距离情况下,也可将高次相位的影响补偿到足够小,使得近距离数字全息的数字再现仍可用快速傅里叶变换算法计算。推导出了满足高次相位补偿的条件和满足补偿条件时的数值再现计算公式。实验结果与理论分析的结论相吻合,并给出了一种修正实际记录的参考光和计算机模拟的理想参考光之间偏差的方法。     

菲涅尔数字全息的脉冲响应

数字全息是用CCD记录全息图并用计算机数值重建全息像的一种全息新方法.在数字全息中,通过对不同记录参数下记录的全息图的数值处理,可以消除零级光和共轭光,从而将数字全息系统看作是一个线性系统.本文依据全息理论和付里叶频谱分析,对菲涅尔数字全息系统的脉冲响应和分辨本领进行了理论分析.结果表明,在矩形等间隔抽样的情形下,菲涅尔数字全息的脉冲响应是由CCD有限大小的孔径衍射斑调制的矩形函数;菲涅尔数字全息的分辨率由CCD的孔径尺寸决定;由于CCD像素具有一定的大小,使得点光源的像发生弥散.     

Method for eliminating zero-order diffraction in lensless Fourier transform digital holography

A method to induce phase shifting in lensless Fourier of digital holography system is presented. In this method, by computer simulation and theoretical analysis on the technology to eliminate the influence of zero-order diffraction in force, it can be found that, a reference light induced in a random non-2π integral number of phase shifting shooting to get the second hologram, and wave reconstruction can be got by the difference value image of the two holograms. And, the method of different digital holography record system with different phase shifting should be used. In this paper, theoretical analyses have been done in detail to discuss the problems that exist in the unsuitable phase-shifting methods. Furthermore, some experiments have been done to prove the reliability of this method. This method can significantly improve the image quality and give better resolution of the reconstructed image.     

Optical-path-length-shifting color digital holography

We propose an in-line color digital holography that can suppress a 0th-order diffraction image and a conjugate image. This technique reconstructs the image of an object from two holograms that are formed at two different distances from the object for each primary color. We numerically simulated the proposed technique and confirmed that it enabled the reconstruction of higher-quality images of an object than the Fresnel transform alone, which is the simplest reconstruction algorithm in digital holography. The effectiveness of the proposed technique was also quantitatively shown by evaluating the reconstructed images using root-mean-square errors. Thus, it was confirmed that the proposed technique was capable of recording and reconstructing both three-dimensional information and color information of an object.     

The elimination of zero-order diffraction of 10.6 μm infrared digital holography

A new method of eliminating the zero-order diffraction in infrared digital holography has been raised in this paper. Usually in the reconstruction of digital holography, the spatial frequency of the infrared thermal imager, such as microbolometer, cannot be compared to the common visible CCD or CMOS devices. The infrared imager suffers the problems of large pixel size and low spatial resolution, which cause the zero-order diffraction a severe influence of the reconstruction process of digital holograms. The zero-order diffraction has very large energy and occupies the central region in the spectrum domain. In this paper, we design a new filtering strategy to overcome this problem. This filtering strategy contains two kinds of filtering process which are the Gaussian low-frequency filter and the high-pass phase averaging filter. With the correct set of the calculating parameters, these filtering strategies can work effectively on the holograms and fully eliminate the zero-order diffraction, as well as the two crossover bars shown in the spectrum domain. Detailed explanation and discussion about the new method have been proposed in this paper, and the experiment results are also demonstrated to prove the performance of this method.     

Methods of Fourier optics in digital holographic microscopy

In this paper, processing methods of Fourier optics implemented in a digital holographic microscopy system are presented. The proposed methodology is based on the possibility of the digital holography in carrying out the whole reconstruction of the recorded wave front and consequently, the determination of the phase and intensity distribution in any arbitrary plane located between the object and the recording plane. In this way, in digital holographic microscopy the field produced by the objective lens can be reconstructed along its propagation, allowing the reconstruction of the back focal plane of the lens, so that the complex amplitudes of the Fraunhofer diffraction, or equivalently the Fourier transform, of the light distribution across the object can be known. The manipulation of Fourier transform plane makes possible the design of digital methods of optical processing and image analysis. The proposed method has a great practical utility and represents a powerful tool in image analysis and data processing. The theoretical aspects of the method are presented, and its validity has been demonstrated using computer generated holograms and images simulations of microscopic objects.