Estimation on the intramolecular 10-membered ring N-H...O=C hydrogen-bonding energies in glycine and alanine peptides

Computation of accurate intramolecular hydrogen-bonding energies for peptides is of great importance in understanding the conformational stabilities of peptides and developing a more accurate force field for proteins. We have proposed a method to determine the intramolecular seven-membered ring N-H...O=C hydrogen-bonding energies in glycine and alanine peptides. In this article, the method is further applied to evaluate the intramolecular 10-membered ring N-H...O=C hydrogen-bonding energies in peptides. The optimal structures of the intramolecular 10-membered ring N-H...O=C hydrogen bonds in glycine and alanine tripetide molecules are obtained at the MP2 level with 6-31G(d), 6-31G(d,p), and 6-31+G(d,p) basis sets. The intramolecular 10-membered ring N-H...O=C hydrogen-bonding energies are then evaluated based on our method at the MP2/6-311++G(3df,2p) level with basis set superposition error correction. The intramolecular 10-membered ring N-H...O=C hydrogen-bonding energies are calculated to be in the range of -6.84 to -7.66, -4.44 to -4.98, and -6.95 to -7.88 kcal/mol. The method is also applied to estimate the individual intermolecular hydrogen-bonding energies in the dimers of amino-acetaldehyde, 2-amino-acetamide, formamide, and oxalamide, each dimer having two identical intermolecular hydrogen bonds. According to our method, the individual intermolecular hydrogen-bonding energies in the four dimers are calculated to be -1.77, -1.67, -6.35, and -4.82 kcal/mol at the MP2/6-311++G(d,p) level, which are in good agreement with the values of -1.84, -1.72, -6.23, and -4.93 kcal/mol predicted by the supermolecular method.     

Assessment of density functionals with long‐range and/or empirical dispersion corrections for conformational energy calculations of peptides

Density functionals with long‐range and/or empirical dispersion corrections, including LC‐ωPBE, B97‐D, ωB97X‐D, M06‐2X, B2PLYP‐D, and mPW2PLYP‐D functionals, are assessed for their ability to describe the conformational preferences of Ac‐Ala‐NHMe (the alanine dipeptide) and Ac‐Pro‐NHMe (the proline dipeptide) in the gas phase and in water, which have been used as prototypes for amino acid residues of peptides. For both dipeptides, the mean absolute deviation (MAD) is estimated to be 0.22–0.40 kcal/mol in conformational energy and 2.0–3.2° in torsion angles ? and ψ using these functionals with the 6‐311++G(d,p) basis set against the reference values calculated at the MP2/aug‐cc‐pVTZ//MP2/aug‐cc‐pVDZ level of theory in the gas phase. The overall performance is obtained in the order B2PLYP‐D ≈ mPW2PLYP‐D > ωB97X‐D ≈ M06‐2X > MP2 > LC‐ωPBE > B3LYP with the 6–311++G(d,p) basis set. The SMD model at the M06‐2X/6‐31+G(d) level of theory well reproduced experimental hydration free energies of the model compounds for backbone and side chains of peptides with MADs of 0.47 and 4.3 kcal/mol for 20 neutral and 5 charged molecules, respectively. The B2PLYP‐D/6‐311++G(d,p)//SMD M06‐2X/6‐31+G(d) level of theory provides the populations of backbone and/or prolyl peptide bond for the alanine and proline dipeptides in water that are consistent with the observed values. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Hydrogen peroxide clusters: the role of open book motif in cage and helical structures

Hartree-Fock (HF) calculations using 6-31G*, 6-311++G(d,p), aug-cc-pVDZ, and aug-cc-pVTZ basis sets show that hydrogen peroxide molecular clusters tend to form hydrogen-bonded cyclic and cage structures along the lines expected of a molecule which can act as a proton donor as well as an acceptor. These results are reiterated by density functional theoretic (DFT) calculations with B3LYP parametrization and also by second-order M?ller-Plesset perturbation (MP2) theory using 6-31G* and 6-311++G(d,p) basis sets. Trends in stabilization energies and geometrical parameters obtained at the HF level using 6-311++G(d,p), aug-cc-pVDZ, and aug-cc-pVTZ basis sets are similar to those obtained from HF/6-31G* calculation. In addition, the HF calculations suggest the formation of stable helical structures for larger clusters, provided the neighbors form an open book structure.     

Comparison of some representative density functional theory and wave function theory methods for the studies of amino acids

Energies of different conformers of 22 amino acid molecules and their protonated and deprotonated species were calculated by some density functional theory (DFT; SVWN, B3LYP, B3PW91, MPWB1K, BHandHLYP) and wave function theory (WFT; HF, MP2) methods with the 6-311++G(d,p) basis set to obtain the relative conformer energies, vertical electron detachment energies, deprotonation energies, and proton affinities. Taking the CCSD/6-311++G(d,p) results as the references, the performances of the tested DFT and WFT methods for amino acids with various intramolecular hydrogen bonds were determined. The BHandHLYP method was the best overall performer among the tested DFT methods, and its accuracy was even better than that of the more expensive MP2 method. The computational dependencies of the five DFT methods and the HF and MP2 methods on the basis sets were further examined with the 6-31G(d,p), 6-311++G(d,p), aug-cc-pVDZ, 6-311++G(2df,p), and aug-cc-pVTZ basis sets. The differences between the small and large basis set results have decreased quickly for the hybrid generalized gradient approximation (GGA) methods. The basis set convergence of the MP2 results has been, however, very slow. Considering both the cost and the accuracy, the BHandHLYP functional with the 6-311++G(d,p) basis set is the best choice for the amino acid systems that are rich in hydrogen bonds.     

Interaction of anions with perfluoro aromatic compounds

The complexes formed by a variety of anions with perfluoro derivatives of benzene, naphthalene, pyridine, thiophene, and furan have been calculated using DFT (B3LYP/6-31++G**) and MP2 (MP2/6-31++G** and MP2/6-311++G**) ab initio methods. The minimum structures show the anion interacting with the pi-cloud of the aromatic compounds. The interaction energies obtained range between -8 and -19 kcal mol(-1). The results obtained at the MP2/6-31++G** and MP2/6-311++G** levels are similar. However, the B3LYP/6-31++G** results provide longer interaction distances and smaller interaction energies than do the MP2 results. The interaction energies have been partitioned using an electrostatic, polarization, and van der Waals scheme. The AIM analysis of the electron density shows a variety of topologies depending on the aromatic system considered.     

Conformational energies for 2-substituted butanes

The conformational free energies for some 2-substituted butanes where X = F, Cl, CN, and CCH were calculated using G3-B3, CBS-QB3, and CCSD(T)/6-311++G(2d,p) as well as other theoretical levels. The above methods gave consistent results with free energies relative to the trans conformers as follows: X = CCH, g+ = 0.77 +/- 0.05 kcal/mol. g- = 0.88 +/- 0.05 kcal/mol; X = CN, g+ = 0.85 +/- 0.05 kcal/mol, g- = 0.75 +/- 0.05 kcal/mol; X = Cl, g+ = 0.70 +/- 0.05 kcal/ml, g- = 0.80 +/- 0.05 kcal/mol; and X = F, g+ = 0.53 +/- 0.05 kcal/mol, g- = 0.83 +/- 0.05 kcal/mol. The conformational free energies also were estimated using the observed liquid phase IR spectra and intensities calculated using B3LYP/6-311++G** and MP2/6-311++G**. The rotational free energy profiles for all of the compounds were estimated at the G3-B3 level.     

Structure of the boronic acid dimer and the relative stabilities of its conformers

Despite the widespread use of boronic acids in materials science and as pharmaceutical agents, many aspects of their structure and reactivity are not well understood. In this research the boronic acid dimer, [HB(OH)(2)](2), was studied by second-order M?ller-Plesset (MP2) perturbation theory and coupled cluster methodology with single and double excitations (CCSD). Pople split-valence 6-31+G*, 6-311G**, and 6-311++G** and Dunning-Woon correlation-consistent cc-pVDZ, aug-cc-pVDZ, cc-pVTZ, and aug-cc-pVTZ basis sets were employed for the calculations. A doubly hydrogen-bonded conformer (1) of the dimer was consistently found to be lowest in energy; the structure of 1 was planar (C(2h)) at most computational levels employed but was significantly nonplanar (C(2)) at the MP2/6-311++G** and CCSD/6-311++G** levels, the result of an intrinsic problem with Pople-type sp-diffuse basis functions on heavy atoms. The dimerization energy, enthalpy, and free energy for the formation of (1) from the exo-endo conformer of the monomer were -10.8, -9.2, and +1.2 kcal/mol, respectively, at the MP2/aug-cc-pVTZ level. Several other hydrogen-bonded conformers of the dimer were local minima on the potential energy surface (PES) and ranged from 2 to 5 kcal/mol higher in energy than 1. Nine doubly OH-bridged conformers, in which the boron atoms were tetracoordinated, were also local minima on the PES, but they were all greater than 13 kcal/mol higher in energy than 1; doubly H-bridged structures proved to be transition states. MP2 and CCSD results were compared to those from the BLYP, B3LYP, OLYP, O3LYP, PBE1PBE, and TPSS functionals with the 6-311++G** and aug-cc-pVTZ basis sets; the PBE1PBE functional performed best relative to the MP2 and CCSD results. Self-consistent reaction field (SCRF) calculations predict that boronic acid dimerization is less favorable in solution than in vacuo.     

The rate enhancement for prolyl cis-to-trans isomerization of cyclic CPFC peptide is caused by an increase in the vibrational entropy of the transition state

The conformational preferences and prolyl cis-trans isomerization of oxidized and reduced Ac-Cys-Pro-Phe-Cys-NH2 (CPFC peptides) have been carried out using the ab initio HF/6-31+G(d) and hybrid density functional B3LYP/6-311++G(d,p) levels of theory. The most preferred conformations of oxidized and reduced CPFC peptides with the trans prolyl peptide bond have a type-I beta-turn for the Pro-Phe sequence in common. In particular, the transition states for both forms are stabilized by the intramolecular hydrogen bonds between the prolyl nitrogen and the N-H group of the Phe3 residue. The rotational barrier DeltaGct to the cis-to-trans isomerization for the oxidized CPFC peptide is calculated to be 19.37 kcal/mol at the B3LYP/6-311++G(d,p)//HF/6-31+G(d) level of theory, which is lower by 0.88 kcal/mol than that of the reduced CPFC peptide. This may indicate that the rate constant kc-->t of the prolyl cis-to-trans isomerization for the oxidized form is about 4 times larger than that of the reduced form, which is reasonably consistent with the value deduced from NMR experiments. In particular, the increase in vibrational entropy for the transition state of the oxidized form over that of the reduced form contributes to enhance the rate constant for the prolyl cis-to-trans isomerization of the oxidized form.     

Theoretical study of the conformational energy hypersurface of cyclotrisarcosyl

The multidimensional Conformational Potential Energy Hypersurface (PEHS) of cyclotrisarcosyl was comprehensively investigated at the DFT (B3LYP/6-31G(d), B3LYP/6-31G(d,p) and B3LYP/6-311++G(d,p)), levels of theory. The equilibrium structures, their relative stability, and the Transition State (TS) structures involved in the conformational interconversion pathways were analyzed. Aug-cc-pVTZ//B3LYP/6-311++G(d,p) and MP2/6-31G(d)//B3LYP/6-311++G(d,p) single point calculations predict a symmetric cis-cis-cis crown conformation as the energetically preferred form for this compound, which is in agreement with the experimental data. The conformational interconversion between the global minimum and the twist form requires 20.88 kcal mol-1 at the MP2/6-31G(d)//B3LYP/6-311++G(d,p) level of theory. Our results allow us to form a concise idea about the internal intricacies of the PEHSs of this cyclic tripeptide, describing the conformations as well as the conformational interconversion processes in this hypersurface. In addition, a comparative analysis between the conformational behaviors of cyclotrisarcosyl with that previously reported for cyclotriglycine was carried out     

Polarizable model potential function for nucleic acid bases

A polarizable model potential (PMP) function for adenine (A), cytosine (C), guanine (G), thymine (T), and uracil (U) is developed on the basis of ab initio molecular orbital calculations at the MP2/6-31+G* level. The PMP function consists of Coulomb, van der Waals, and polarization terms. The permanent atomic charges of the Coulomb term are determined by using electrostatic potential (ESP) optimization. The multicenter polarizabilities of the polarization term are determined by using polarized one-electron potential (POP) optimization in which the electron density changes induced by a test charge are target. Isotropic and anisotropic polarizabilities are adopted as the multicenter polarizabilities. In the PMP calculations using the optimized parameters, the interaction energies of Watson-Crick type A-T and C-G base pairs were -15.6 and -29.4 kcal/mol, respectively. The interaction energy of Hoogsteen type A-T base pair was -17.8 kcal/mol. These results reproduce well the quantum chemistry calculations at the MP2/6-311++G(3df,2pd) level within the differences of 0.6 kcal/mol. The stacking energies of A-T and C-G were -9.7 and -10.9 kcal/mol. These reproduce well the calculation results at the MP2/6-311++G (2d,2p) level within the differences of 1.3 kcal/mol. The potential energy surfaces of the system in which a sodium ion or a chloride ion is adjacent to the nucleic acid base are calculated. The interaction energies of the PMP function reproduced well the calculation results at the MP2/6-31+G* or MP2/6-311++G(2d,2p) level. The reason why the PMP function reproduces well the high-level quantum mechanical interaction energies is addressed from the viewpoint of each energy terms.     

Influence of diffuse and polarization functions on the second-order Møller–Plesset optimized dihedral angle of biphenyl

 Using 6-31G and 6-311G basis sets to which diffuse and polarization functions were added in a stepwise fashion (a total of 16 basis sets), Hartree–Fock (HF), MP2 and B3LYP geometry optimizations were performed on biphenyl. With the MP2 method, diffuse functions raise the dihedral angle φ, for example, from 46.3° for 6-31G to 54.1° for 6-311++G, while polarization functions lower it, for example, from 54.1° for 6-311++G to 42.1° for 6-311++G(2d,2p). For a single set of polarization functions, φ(MP2) lies close to or above φ(HF) (44–47°), but for a double set it is below φ(HF) and is close to B3LYP values (38–42°) which show little basis set dependence. The most reliable value for φ, 42.1° [MP2/6-311++G(2d,2p)], is expected to increase slightly by adding more diffuse functions. The corresponding best calculated energy barrier at 0° (coplanar conformation) is 2.83 kcal/mol, much higher than the experimental estimate (1.4 ± 0.5 kcal/mol). The barrier at 90° is 1.82 kcal/mol, in line with the experimental estimate (1.6 ± 0.5 kcal/mol) and with previous theoretical results. Received: 9 September 2002 / Accepted: 15 November 2002 / Published online: 1 April 2003 Correspondence to: Friedrich Grein e-mail: fritz@unb.ca Acknowledgement. The author would like to thank NSERC (Canada) for financial support.     

First-principle predictions of absolute pKa's of organic acids in dimethyl sulfoxide solution

MP2/6-311++G(d,p) and B3LYP/6-311++G(2df,p) methods were found to be able to predict the gas-phase acidities of various organic acids with a precision of 2.2 and 2.3 kcal/mol. A PCM cluster-continuum solvation method was developed that could predict the solvation free energies of various neutral, cationic, and anionic organic species in DMSO with a precision of about 2.0 kcal/mol. Using these carefully tested methods, we successfully predicted the pKa's of 105 organic acids in DMSO with a precision of 1.7-1.8 pKa units. We also predicted the pKa's of a variety of organosilanes in DMSO for the first time using the newly developed methods. This study was one of the first that employed first-principle methods for calculating pKa's of unrelated compounds in organic solutions.     

Theoretical studies on the intramolecular hydrogen bond and tautomerism of 8-mercaptoquinoline in the gaseous phase and in solution using modern DFT methods

A theoretical quantum chemical study of the intramolecular hydrogen bonding interactions in 8-mercaptoquinoline has been carried out. Special attention has been paid to the rotation of S-H bond and intramolecular proton-transfer reactions. Therewith, the B3LYP/6-311++G(d,p), B3LYP/6-31+G(2d,2p), MPW1K/6-311++G(d,p), MPW1K/6-31+G(2d,2p), BH&HLYP/6-311++G(d,p), and G96LYP/6-311++G(d,p) methods have been used. By means of the Onsager and PCM reaction field methods, the effects of solvent on hydrogen-bond energies, conformational equilibria, rotational barriers, and tautomerism in aqueous solution have been studied. These simulations were done at the MPW1K/6-311++G(d,p) and B3LYP/6-311++G(d,p) levels. Natural-bond orbital analysis has been performed to study the intramolecular hydrogen bond (IHB) in the gaseous phase and in aqueous medium. The stability of forms under consideration in solution does not coincide with that in the gaseous phase, underlining a great importance of the electrostatic influence of solvent. Double-proton transfer in the prototropic tautomerization of 8-mercaptoquinoline, one water molecule complex in the gaseous phase and in solution, has been systematically studied. The double-proton transfer occurs concertedly and synchronously. The water-assisted tautomerization is kinetically less, but thermodynamically more favorable, compared to that of the single-proton transfer. As in the case with single-proton transfer, for water-assisted reaction, the tautomerization energies and barrier heights decrease with the increase in dielectric constant, which implies faster and more complete tautomerization of 8-mercaptoquinoline in a polar solvent.     

Theoretical Studies on Intermolecular Hydrogen-bond Interactions between Hexamethylenetetramine and Nitric Acid

The structures of the complexes generated by hexamethylenetetramine and nitric acid have been fully optimized by B3LYP method at the 6-311++G** and aug-cc-pVTZ levels. The intermolecular hydrogen-bonding interactions have been calculated by the B3LYP/6-311++G**, B3LYP/aug-cc-pVTZ, MP2(full)/6-311++G** and CCSD(T)/6-311++G** methods, respectively. The NBO (nature bond orbital), AIM (atom in molecule), temperature effect and solvation effect have been analyzed to reveal the origin of the interactions. The results indicate that the stable hydrogen-bonded complexes could be generated by hexamethylenetetramine and nitric acid. The interactions follow the order of (a)>>(e)>(b)>(c)>(d)>(f)>(g). The C-N bonds which are adjacent to the methylene involving the hydrogen bonds tend to break in the chemical reaction. Due to the exothermic process, low temperature is conducive to the formation of the composition, which tallies with the experimental result.     

Dimers of boroglycine and methylamine boronic acid: a computational comparison of the relative importance of dative versus hydrogen bonding

Boronic acids are widely used in materials science, pharmacology, and the synthesis of biologically active compounds. In this Article, geometrical structures and relative energies of dimers of boroglycine, H2N-CH2-B(OH)2, and its constitutional isomer H3C-NH-B(OH)2, were computed using second-order M?ller-Plesset perturbation theory and density functional theory; Dunning-Woon correlation-consistent cc-pVDZ, aug-cc-pVDZ, cc-pVTZ, and aug-cc-pVTZ basis sets were employed for the MP2 calculations, and the Pople 6-311++G(d,p) basis set was employed for a majority of the DFT calculations. Effects of an aqueous environment were incorporated into the results using PCM and COSMO-RS methodology. The lowest-energy conformer of the H2N-CH2-B(OH)2 dimer was a six-membered ring structure (chair conformation; Ci symmetry) with two intermolecular B:N dative-bonds; it was 14.0 kcal/mol lower in energy at the MP2/aug-cc-pVDZ computational level than a conformer with the classic eight-centered ring structure (Ci symmetry) in which the boroglycine monomers are linked by a pair of H-O...H bonds. Compared to the results of MP2 calculations with correlation-consistent basis sets, DFT calculations using the PBE1PBE and TPSS functionals with the 6-311++G(d,p) basis set were significantly better at predicting relative conformational energies of the H2N-CH2-B(OH)2 and H3C-NH-B(OH)2 dimers than corresponding calculations using the BLYP, B3LYP, OLYP, and O3LYP functionals, particularly with respect to dative-bonded structures.     

Ab initio- and density-functional studies of conformational behaviour of N-formylmethionine in gaseous phase

The current work is a study of the conformational space of the non-ionic N-formylmethionine molecule around its seven structurally significant internal backbone torsional angles at B3LYP/6-31++G(d,p) levels of theory in the gaseous phase. The potential energy surface exploration reveals that a total of 432 different conformers would result if all the possible combinations of the internal rotations were to be considered. A set of twelve conformers of the N-formylmethionine molecule are then further analysed in terms of their relative stabilities, theoretically predicted harmonic vibrational frequencies, HOMO-LUMO energy gaps, ESP charges, rotational constants and dipole moments calculated using MP2/6-31++G(d,p) and B3LYP/6-311++G(d,p) levels. The calculated relative energy-range of the conformers at the MP2 level is 11.08 kcal mol^?1 (1 kcal = 4.1868 kJ), whereas the same obtained at the B3LYP level is 10.02 kcal mol^?1. The results of this study provide a good account of the role of four types of intramolecular H-bonds, namely O…H—O, O…H—N, O…H—C and N…H—C, in influencing the energies of the conformers as well as their conformational and vibrational spectroscopic aspects. The relative stability order of the conformers appears to depend on the level of theory used while the vibrational frequencies calculated at the B3LYP level are in better agreement with the experimental values.     

Gaseous arginine conformers and their unique intramolecular interactions

Extensive ab initio calculations were employed to characterize stable conformers of gaseous arginine, both the canonical and zwitterionic tautomers. Step-by-step geometry optimizations of possible single-bond rotamers at the B3LYP/6-31G(d), B3LYP/6-31++G(d,p), and MP2/6-31++G(d,p) levels yield numerous structures that are more stable than any known ones. The final electronic energies of the conformers were determined at the CCSD/6-31++G(d,p) level. The lowest energies of the canonical and zwitterionic structures are lower than the existing values by 2.0 and 2.3 kcal/mol, respectively. The relative energies, rotational constants, dipole moments, and harmonic frequencies of the stable conformers remain for future experimental verification. The conformational distributions at various temperatures, estimated according to thermodynamic principles, consist almost exclusively of the newly found structures. One striking feature is the occurrence of blue-shifting hydrogen bonds in all six of the most stable conformers. A unique feature of important conformations is the coexistence of dihydrogen and blue- and red-shifting hydrogen bonds. In addition to the hydrogen bonds, the stereoelectronic effects were also found to be important stabilization factors. The calculated and measured proton affinities agree within the theoretical and experimental uncertainties, affirming the high quality of our conformational search. The theoretical gas-phase basicity of 245.9 kcal/mol is also in good agreement with the experimental value of 240.6 kcal/mol. The extensive searches establish firmly that gaseous arginine exists primarily in the canonical and not the zwitterionic form.     

Multipole electrostatics in hydration free energy calculations

Hydration free energy (HFE) is generally used for evaluating molecular solubility, which is an important property for pharmaceutical and chemical engineering processes. Accurately predicting HFE is also recognized as one fundamental capability of molecular mechanics force field. Here, we present a systematic investigation on HFE calculations with AMOEBA polarizable force field at various parameterization and simulation conditions. The HFEs of seven small organic molecules have been obtained alchemically using the Bennett Acceptance Ratio method. We have compared two approaches to derive the atomic multipoles from quantum mechanical calculations: one directly from the new distributed multipole analysis and the other involving fitting to the electrostatic potential around the molecules. Wave functions solved at the MP2 level with four basis sets (6-311G*, 6-311++G(2d,2p), cc-pVTZ, and aug-cc-pVTZ) are used to derive the atomic multipoles. HFEs from all four basis sets show a reasonable agreement with experimental data (root mean square error 0.63 kcal/mol for aug-cc-pVTZ). We conclude that aug-cc-pVTZ gives the best performance when used with AMOEBA, and 6-311++G(2d,2p) is comparable but more efficient for larger systems. The results suggest that the inclusion of diffuse basis functions is important for capturing intermolecular interactions. The effect of long-range correction to van der Waals interaction on the hydration free energies is about 0.1 kcal/mol when the cutoff is 12?, and increases linearly with the number of atoms in the solute/ligand. In addition, we also discussed the results from a hybrid approach that combines polarizable solute with fixed-charge water in the HFE calculation.     

Matrix isolation infrared and ab initio study of the hydrogen bonding between formic acid and water

The infrared spectra of the formic acid-water complexes isolated in argon matrices are reported. Both supersonic jet expansion and a conventional effusive source followed by trapping in solid argon at 10K are used to obtain the matrices. The experimental IR spectra are compared to the data obtained from high level ab initio (MP2) and DFT (B3LYP) calculations with 6-311++G(d,p) and aug-cc-pVTZ basis sets. The complex formation results in red shifts in the C=O and O-H stretching vibrations and a blue shift in the C-O stretching vibration of formic acid. The O-H stretching modes of water also exhibit pronounced red shifts. Both the MP2 and B3LYP calculations located three minima corresponding to cyclic HCOOH...H2O complexes with two hydrogen bond interactions. The binding energies are -10.3, -5.1, and -3.5 kcal mol(-1), respectively, for the three complexes at the MP2/ aug-cc-pVTZ level, corrected for the basis set superposition error (BSSE) using the Boys-Bernardi counterpoise scheme. Comparison of the calculated frequencies of the three complexes with the matrix IR spectrum reveals that the lowest energy complex is formed. In addition, a complex of formic acid with two water molecules is observed.     

Pi-pi interaction in pyridine

pi-pi Interaction in pyridine dimer and trimer has been investigated in different geometries and orientations at the ab initio (HF, MP2) and DFT (B3LYP) levels of theory using various basis sets (6-31G, 6-31G, 6-311++G) and corrected for basis set superposition error (BSSE). While the HF and DFT calculations show the pyridine dimer and the trimer to be unstable with respect to the monomer, the MP2 calculations show them to be clearly stable, thus emphasizing the need to include electron correlation while determining stacking interaction in such systems. The calculated MP2/6-311++G binding energy (100% BSSE corrected) of the parallel-sandwich, antiparallel-sandwich, parallel-displaced, antiparallel-displaced, T-up and T-down geometries for pyridine dimer are 1.53, 3.05, 2.39, 3.97, 1.91, 1.47 kcal/mol, respectively. The results show the antiparallel-displaced geometry to be the most stable. The binding energies for the trimer in parallel-sandwich, antiparallel-sandwich, and antiparallel-displaced geometry are found to be 3.18, 6.14, and 8.04 kcal/mol, respectively.