A DSC study of effect of carbon nanotubes on crystallisation behaviour of poly(ethylene oxide)

Crystallisation behaviour of poly(ethylene oxide) (PEO)/multi-walled carbon nanotubes (MWCNT) and PEO/chemically modified MWCNT nanocomposites were investigated by means of differential scanning calorimetry. Non-isothermal crystallisation experiments showed that incorporation of MWCNT and chemically modified MWCNT reduced the crystallinity and restricted the spherical crystal growth of PEO. The nucleation sites decrease and spherical crystal size increased compared to the neat PEO. Change of crystal structure from spherical to disk-like was revealed by Avrami equation when MWCNT was added up to 1 wt.%.     

Studies on electro‐optical properties of polymer matrix/LC/ITO nanoparticles composites

In this paper, polymer‐dispersed liquid crystal (PDLC) films consisting of liquid crystal (LC)/monomers/indium tin oxide (ITO) nanoparticles with good near‐infrared absorption property had been fabricated, and the influence of the ITO nanoparticles modified with 3‐methacryloxypropyltrimethoxysilane (KH570) on the PDLC films was systematically studied. First, different liquid crystal content was studied to obtain PDLC films with good electro‐optical properties. And then, various weight ratio of ITO nanoparticles was added to samples. While the content of ITO nanoparticles was increased, the saturation voltage increased and the CR decreased. Though the electro‐optical properties of PDLC samples reduced with the addition ITO nanoparticles, the near‐infrared absorption property of films was enhanced.     

Relation of the number of cross-links and mechanical properties of multi-walled carbon nanotube films formed by a dehydration condensation reaction

Multi-walled carbon nanotube (MWCNT) films were prepared by employing a condensation reaction utilizing 1,3-dicyclohexylcarbodiimide (DCC) to cross-link each MWCNT with carboxylic acid and hydroxyl groups. Morphological changes in the resultant MWCNT films were monitored using scanning electron microscopy and showed that the MWCNTs were randomly intertwined in the films. The prepared MWCNT films were 17 mm in diameter and 20 microm in thickness, and the apparent density was 0.59 g/cm(3). Fourier transform-infrared spectroscopy confirmed that each MWCNT modified with carboxylic acid and hydroxyl groups was cross-linked through the ester bond. It was found that the ratio of the number of ester cross-links and carbon atoms of the nanotubes per unit apparent volume (cm(3)) of condensed-MWCNT films was 5.27 x 10(-3) using thermogravimetric analysis (TGA). The tensile strength and Vickers hardness of condensed-MWCNT films achieved an average of 15 and 9.2 MPa, respectively, and were greater than those of free-standing MWCNT films without ester bond.     

水溶性多壁碳纳米管/铜酞菁染料自组装薄膜的制备与表征

Water soluble multi-wall carbon nanotubes (MWCNTs) were prepared via chemical oxidation. Under ultrasonication,the chemically treated MWCNTs can be dispersed in water to form colloids. The MWCNTs were characterized by FT-IR spectra. The FT-IR spectra reveal the presence of carboxylic groups on the nanotubes. The functional groups can improve the nanotubes-solubility in water. Alcian Blue 8GX (AB), a quaternary ammonium dye of the copper phthalocyanine group, was dissolved in water and used to form electrostaticcally self-assembled multilayer films. The MWCNT/AB composite films were characterized by UV-vis absorption spectra as well as AFM and fluorescence spectrum. The experimental results show that the MWCNT/AB composite films can be produced easily. Compared to those of the AB aqueous solutions, composite films exhibit pronounced differences in the absorption and fluorescence spectra, which suggests that AB molecules aggregated in the composite film, and that a charge transfer might exist between AB molecules and the MWCNTs.     

Dehydrogenase‐Based Reagentless Biosensors: Electrochemically Assisted Deposition of Sol‐Gel Thin Films on Functionalized Carbon Nanotubes

Multiwalled carbon nanotubes (MWCNT) have been functionalized, for the electrocatalytic detection of NADH, by microwave treatment, electrochemical deposition of poly(methylene green) or wrapping with an Os‐complex modified polymer. Sol‐gel thin films have been then electrodeposited on the carbon nanotube layers for co‐immobilization of D ‐sorbitol dehydrogenase and diaphorase when necessary and NAD⁺ via covalent linkage using glycidoxypropyltrimethoxysilane. The comparison of these systems shows that the electrodeposited sol‐gel matrix can significantly affect the operational behavior of functionalized MWCNT. Only MWCNT wrapped with the Os‐complex modified polymer and covered with a sol‐gel biocomposite allowed the electrochemical detection of D ‐sorbitol in a reagentless configuration.     

Electro-optical and dielectric study of multi-walled carbon nanotube doped polymer dispersed liquid crystal films

The self-organising property of nematic liquid crystals (LCs) was used to align multi-walled carbon nanotubes (MWCNT) dispersed in them. MWCNT not only well integrate in the matrix but also, even at very low concentration, have a detectable effect on the LC properties that can be very attractive for display applications. In the present work, MWCNT were doped (0–0.5% wt/wt) in two different types of LCs. These MWCNT doped polymer dispersed LC (CPDLC) films were studied comprehensively using fundamental techniques. Polarising optical microscope (POM) and scanning electron microscope (SEM) techniques used for morphological study reveal that the LC droplet size remains unchanged with increase in MWCNT concentration. The electro-optical (EO) study performed by increasing voltage in steps of 10 V up to 100 V at an optimised frequency of 200 Hz and at temperature 25°C shows that the low MWCNT concentration films show good optical response than the higher one. The dielectric behaviour of CPDLC films in the frequency range 20 Hz to 20 MHz was investigated using precision impedance analyser. The obtained data were modelled with Debye and Cole-Cole methods to calculate relaxation time and distribution parameter (α). The zero value of α indicates Debye type relaxation processes.     

碳纳米管/聚二烯丙基二甲基氯化铵/磷钼酸复合膜的组装及其在溴酸盐检测中的应用

通过静电层层组装技术在玻碳(GC)电极表面制备{多壁碳纳米管(MWCNT)/聚二烯丙基二甲基氯化铵(PDDA)}n多层膜,并采用循环伏安法在多层膜的表面电化学修饰一层磷钼酸(PMo12)膜,构筑GC/{MWCNT/PDDA}n-PMo12复合膜修饰电极.利用SEM对比观察{MWCNT/PDDA}n和{PDDA/MWCNT}n-PMo12的微观结构,并研究该复合膜修饰电极的电化学及其对溴酸盐(BrO3-)电催化还原性质.在此基础上研发一种基于GC/{MWCNT/PDDA}n-PMo12复合膜修饰电极的电流型BrO3-传感器,该传感器表现出明显增大的响应电流.在最优的实验条件下,采用电流时间曲线(i-t)法考察该复合膜修饰电极对BrO3-的安培响应.实验结果表明,该传感器在BrO3-浓度为50～400nmol/L的范围内具有良好的线性关系,相关系数R2为0.9950,响应时间为1.53s,检出限为20nmol/L,灵敏度为13.81mA(mmol/L)-1cm-2.     

大分子引发剂分子量对接枝聚合物基体的PDLC电光性能的影响

以可逆加成-断裂链转移(RAFT)、引发转移终止(iniferter)活性自由基聚合相结合的方法,用一步法制备了不同分子量的大分子引发剂RAFT-PS-co-PCMSI(MI),并通过紫外光聚合诱导相分离法制备了以接枝聚合物为基体的聚合物分散液晶(PDLC)膜.研究了不同分子量的MI对PDLC的微观形貌,关闭状态透光率,阈值电压,饱和电压以及记忆效应等方面的影响.研究表明,降低PDLC中MI的分子量,会使得液晶微滴粒径增大,阈值电压(Vth)、饱和电压(Vsat)减小,记忆效应、关闭状态透光率升高.     

Highly transparent memory states in polymer dispersed liquid crystal films

Electro-optical properties of polymer dispersed liquid crystal (PDLC) films which have reversed morphology are investigated. Highly transparent memory states, for which transmittances exceed more than 80 per cent, are observed in these PDLC films. The saturation voltage V₉₀ can be decreased by a PTF (a phase transition with a field) operation and becomes 10 times lower than that without PTF operation. A contrast ratio of more than 600 is obtained in the memory state of a thick PDLC film.     

普鲁士蓝/多壁碳纳米管修饰电极测定维生素C

利用电化学方法在多壁碳纳米管修饰的玻碳电极表面聚合一层普鲁士蓝,制备普鲁士蓝/多壁碳纳米管修饰玻碳电极,运用循环伏安法研究了维生素C(vc)在该修饰电极上的电化学行为.该修饰电极对Vc显示出快速的电化学响应和较好的电催化活性,在pH为4.0的磷酸盐溶液中,Ve浓度与其氧化峰电流在8.0×10-4～1.0×10-2 mol/L范围内呈现良好的线性关系,相关系数为0.9993,检测限为6.4×10-5mol/L.该电极具有较好的稳定性和重现性.     

Effects of off-state alignment in polymer dispersed liquid crystals

Partial off-state alignment of the liquid crystal in polymer dispersed liquid crystal (PDLC) droplets was obtained by the application of electric or magnetic fields during their formation. Photopolymerization was used to induce phase separation of the liquid droplets from monomer/liquid crystal solutions. Substantial director directionality was retained in these PDLC films after removal of the fields used during their formation. This alignment affected both the off-state and the on-state electro-optic properties of the films. Transverse electrical fields (5 to 60 V across a 15 μm thickness) applied during PDLC formation from a solution of E7 (BDH Ltd) in a monomer resulted in PDLC films with progressively lower off-state scattering and lower threshold voltage. Strong longitudinal magnetic fields (9 to 14 T) applied during PDLC formation with these materials resulted in strong polarization effects in the light scattering off-state. In the infrared region, where there is less light scattering than in the visible region, the longitudinally aligned films shows tunable birefringent electro-optic effects while retaining the fast time response characteristics of PDLC films with small droplet sizes.     

Effects of off-state alignment in polymer dispersed liquid crystals

Partial off-state alignment of the liquid crystal in polymer dispersed liquid crystal (PDLC) droplets was obtained by the application of electric or magnetic fields during their formation. Photopolymerization was used to induce phase separation of the liquid droplets from monomer/liquid crystal solutions. Substantial director directionality was retained in these PDLC films after removal of the fields used during their formation. This alignment affected both the off-state and the on-state electro-optic properties of the films. Transverse electrical fields (5 to 60 V across a 15 μm thickness) applied during PDLC formation from a solution of E7 (BDH Ltd) in a monomer resulted in PDLC films with progressively lower off-state scattering and lower threshold voltage. Strong longitudinal magnetic fields (9 to 14 T) applied during PDLC formation with these materials resulted in strong polarization effects in the light scattering off-state. In the infrared region, where there is less light scattering than in the visible region, the longitudinally aligned films shows tunable birefringent electro-optic effects while retaining the fast time response characteristics of PDLC films with small droplet sizes.     

Effects of the fluorinated liquid crystal molecules on the electro-optical properties of polymer dispersed liquid crystal films

The different fluorinated liquid crystal (LC) molecules doped to E8 were used as LC component to prepare polymer dispersed liquid crystal (PDLC) films. The mass fraction of the LC mixture is fixed 50.0 wt%. Results indicate that doping 8.0 wt% fluorinated LC molecule ME3CP to E8 significantly reduced the driving voltage of the PDLC films, and the driving voltage reduced with the rise of mass fraction of ME3CP. Besides, the terminal flexible chain length of the fluorinated LC molecule influenced the LC mixture properties based on E8, such as the dielectric anisotropy, birefringence and viscosity of the LC mixture, and the morphology and the electro-optical properties of PDLC films were controlled not only by the physical properties of the LC mixture, but also by the terminal flexible chain length of the fluorinated LC molecule .     

The physical properties of alkene-terminated liquid crystal molecules/E8 mixture and the electro-optical properties as they doped in polymer-dispersed liquid crystal systems

Effects of the content of fluorinated alkene-terminated liquid crystal (LC) molecules on the physical properties of the fluorinated alkene-terminated LC/E8 mixture were studied. The morphology and electro-optical properties as they doped in polymer-dispersed liquid crystal (PDLC) films were investigated. The detailed discussion of the obtained results is given. As a result, comparing with the physical properties of the series of LC mixtures with the same content of the analogous fully saturated compounds doped with E8, we find that the birefringence is significantly larger for the LC mixture with the alkene-terminated materials. Both fluorinated alkene-terminated LC molecules and the analogous fully saturated compounds doped with E8 reduce the driving voltage of PDLC films. Moreover, PDLC films with the fluorinated alkene-terminated LC molecules possessed higher contrast ratio and faster response time than that of the PDLC films prepared by adding the same mass fraction of the analogous fully saturated compounds. Thus, the ability to manipulate physical properties of LC mixture and electro-optical properties of PDLC films by changing the LC molecular structures may have future relevance for new LC structures design and applications of PDLC films.     

Effects of functionality of thiol monomer on electro-optical properties of polymer-dispersed liquid crystal films

In this paper, polymer-dispersed liquid crystal (PDLC) films which based on the acrylate and the thiol monomers were first prepared by ultraviolet-initiated polymerisation. The electro-optical properties and morphologies of the PDLC films were systematically investigated. The functionality of thiol monomers and their feed ratio showed great influence on the properties of the fabricated PDLC films because of the existence of competition between thiol–acrylate reaction and acrylate monomer polymerisation reaction. This made the polymer network and electro-optical properties of the PDLC films easily tunable by the introduction of the thiol monomers. When added four-functional thiol monomer PETMP with appropriate concentration into the PDLC system, lower driven voltage and higher contrast ratio were achieved.     

Highly transparent memory states in polymer dispersed liquid crystal films

Abstract

Electro-optical properties of polymer dispersed liquid crystal (PDLC) films which have reversed morphology are investigated. Highly transparent memory states, for which transmittances exceed more than 80 per cent, are observed in these PDLC films. The saturation voltage V ₉₀ can be decreased by a PTF (a phase transition with a field) operation and becomes 10 times lower than that without PTF operation. A contrast ratio of more than 600 is obtained in the memory state of a thick PDLC film.     

The effect of molecular weight of polymer matrix on properties of polymer-dispersed liquid crystals

The electro-optical properties and memory effects are important characters of polymer-dispersed liquid crystal (PDLC) devices. Molecular weight of polymer matrix influences the morphology of liquid crystal droplets in PDLC film and the performance of PDLC devices. In this letter, PDLC films were doped with a small amount of chain transfer agent (CTA), in order to control the molecular weight of polymer matrix. It is observed that the addition of CTA induces a reduction of threshold voltage. In addition, the effect of molecular weight on memory effects of PDLC devices was also discussed. It is found that the entanglement between polymer and liquid crystal molecule increased with the molecular weight, which reduces the memory effect.     

Effects of thiol monomers on the electro-optical properties of polymer-dispersed liquid crystal films prepared by nucleophile-initiated thiol-ene click reaction

ABSTRACT

Nucleophile-initiated thiol-ene click reaction is a highly novel and efficient method of preparing polymer-dispersed liquid crystal (PDLC) films. The effects of thiol monomers on the electro-optical properties of PDLC films prepared by nucleophile-initiated thiol-ene click reaction were investigated in this work. The thiol monomers were dithiol, trithiol, tetrathiol or their mixture. It was found that the increase of functionality could lead to the increase of threshold voltage and saturation voltage and the decrease of off-state transmittance. The influence of reaction temperature was also investigated. The results indicated that functionality and reaction temperature had combined effects on the electro-optical properties of PDLC films.     

The fabrication of polymer dispersed liquid crystal based on SiO2 photonic crystal template

The conductance of polymer matrix is an important factor for the property of the polymer dispersed liquid crystal (PDLC). The nanographites are dispersed into the polymer matrix for optimising the dielectric conductive property. The synthesised nanoparticles SiO₂ was used as photonic crystal (PC) to work as a template for fabricating PDLC films. A mixture of pre-polymer and liquid crystals (LCs) was infiltrated into the void of the PC and polymerised under ultraviolet light. The void of the PC made uniform the dispersion of the liquid crystals in the films. The optical property of the PDLC films was optimised by doped nanographites and negative charge SiO₂ template. The effect of negative charge SiO₂ and nanographites on the threshold voltage and driving voltage was researched. The morphology of the PDLC films was studied by the FTIR image. The dispersed LCs droplets were uniformly affected by the addition of the nanographites. The LCs droplets dispersed in the polymer were located in the void of the SiO₂ photonic crystal.     

Cyano terminated tolane compounds for polymer dispersed liquid crystal application: relationship between cyano terminated tolane based molecular structures and electro-optical properties

ABSTRACT

The structures of the liquid crystal (LC) molecules have a key role in impacting the electro-optical performance of a polymer dispersed liquid crystal (PDLC) film. In this paper, the relationship between the LC molecular structures and the electro-optical properties of PDLC films is investigated based on an unexplored cyano-terminated tolane compounds (CTTCs) doped E8 LCs/UV polymers system. Due to the high polarity of CTTCs, LCs doped with the cyano-terminated tolane (CTT) molecules exhibit high birefringence and large positive dielectric anisotropy. On the whole, PDLC films doped with the CTT molecules exhibit a lower driving voltage than that doped with the pure E8. More excitingly, PDLC films based on CTT molecules with larger length-to-width ratio and longer conjugated system show higher contrast ratio (CR) and faster response time. Eventually, the mechanism of the effects of CTT-based molecular structures and the relationship between the electro-optical performance of PDLC films and CTT molecules are illustrated. This work paves a new way for optimising the electro-optical properties of PDLC films.