On equilibria with participation of gold(I) complexes in sulfite-thiocarbamide media

The constants of protonation and sulfite ligand substitution by thiocarbamide for Au(SO₃) ₂ ^3? complex were determined. Mixed forms Autu(SO₃)^? and probably binuclear complex [Au₂tu₂SO₃] were shown to occur in noticeable concentrations in sulfite-thiocarbamide media in addition to Autu ₂ ⁺ and Au(SO₃) ₂ ^3? complex forms.     

Stripping voltammetric determination of azide ions

A procedure is proposed for the stripping voltammetric determination of N ₃ ^? ions at a mercury film electrode. It is based on the reduction of the mercury azide formed upon the oxidation of mercury in the presence of N ₃ ^? at ?0.02 to ?0.04V (in reference to an Ag/AgCl electrode) in a 0.1 M Na₂SO₄ supporting electrolyte solution. A linear dependence of the cathodic current peak on the N ₃ ^? concentration is observed in the concentration range from 4 × 10^?9 to 1 × 10^?3 M.     

Efficient electrocatalytic oxidation and selective determination of isoniazid by Fe(tmphen) 3 2+ -exchanged Nafion?-modified electrode

Cyclic voltammetry and electrochemical impedance studies of Fe(tmphen) ₃ ²⁺ (where tmphen?=?3,4,7,8-tetramethyl-1,10-phenanthroline)-immobilized Nafion?-modified glassy carbon electrode (GC/Nf/Fe(tmphen) ₃ ²⁺ ) are carried out in 0.1?M Na₂SO₄ solution. Nafion–Fe(tmphen) ₃ ²⁺ complex exhibits efficient electrocatalytic oxidation of isoniazid. The linear double reciprocal plot of current and concentration of isoniazid shows a Michaelis–Menten-type catalytic process. The catalytic oxidation currents are proportional to the concentration of isoniazid and show a wide linear calibration range for the quantitative determination of isoniazid. Detection limit and sensitivity are found to be 13?μM and 2.5?μA?mM^?1, respectively.     

Effect of inorganic ions on the photocatalytic degradation of humic acid

The article studies on the effects of six inorganic ions (Ca²⁺, Mg²⁺, Cl^?, SO ₄ ^2? , H₂PO ₄ ^? , and HCO ₃ ^? ) on titanium dioxide (TiO₂)-based photocatalytic degradation of humic acid (HA). We focus on the effects of the inorganic ions on HA characters, adsorption of HA on TiO₂ and photocatalytic degradation of HA. The results indicate that Ca²⁺ and Mg²⁺ with HA can form complexes which can decrease the solubility of HA, and then increase the HA adsorbed on TiO₂. However, the complex is more difficult to be degraded than HA. The effects of Cl^? and SO ₄ ^2? are closely related to their influences on HA solubility. The solubility changes of HA to some extent can enhance the adsorption of HA on TiO₂, and promote the photocatalytic degradation. Nevertheless, great solubility decreasing of HA can weaken the photocatalytic degradation. HCO ₃ ^? and H₂PO ₄ ^? can inhibit the photocatalytic degradation process seriously, because HCO ₃ ^? and H₂PO ₄ ^? are the strong scavengers of hydroxyl radicals, and can weaken the adsorption of HA on TiO₂ due to adsorption competition.     

Properties of the gold(I) sulfite complex in acidic chloride solutions

The effects of various factors on the redox stability of the gold(I) sulfite complex Au(SO₃)₂^3- in acidic chloride solutions is studied. Increased concentrations of gold and H⁺, as well as temperature, reduce the time before traces of gold(0) emerge; increased concentrations of sulfite and especially of Cl^– increase this time. The beaker material (quartz, glass, or polypropylene) is found to have no significant effect. Added organic solvents have different effects. It is shown using UV spectroscopy and pH measurements that the average number of SO₃^2- ions bound to one gold(I) ion can be much greater than two even at an excessive amount of sulfite in the acidic region (pH 2–4) due to the equilibrium Au(SO₃)Cl^2– + SO₃^2- = Au(SO₃)₂^3- + Cl^– with the constant logK₂ = 6.4 ± 0.1 at 25°C and I = 1 M (NaCl).     

Diffusion and Ion Association in Concentrated Solutions of Aqueous Lithium, Sodium, and Potassium Sulfates

Taylor dispersion is used to measure mutual diffusion coefficients for aqueous Li₂SO₄ solutions at concentrations from 0.09 to 2.62 mol-dm^-3 at 25°C. The Li₂SO₄ results and previously reported diffusion coefficients for aqueous Na₂SO₄ and K₂SO₄ are compared with predictions made by treating the limiting electrolyte diffusion coefficients as reference values and applying corrections for nonideal solution behavior, ionic hydration, and viscosity changes as the concentration is raised. Good agreement is obtained if the M⁺ + SO ₄ ^2- ? MSO ₄ ^- (M = Li, Na, K) association equilibria are included in the analysis. Extents of formation of the MSO ₄ ^- ion pairs are evaluated by fitting Pitzer's mixed electrolyte equations for aqueous M⁺–MSO ₄ ^- –SO ₄ ^2- ions to osmotic coefficient data. Diffusion coefficients for hypothetical solutions of the completely dissociated M₂SO₄ electrolytes are calculated to illustrate the effects of ion association on diffusion. Association of the M⁺ and SO ₄ ^2- ions increases the overall mobility and thermodynamic driving forces for their diffusion.     

Thermodynamic model for aqueous Cd2+−CO 3 2− ionic interactions in high-ionic-strength carbonate solutions,and the solubility product of crystalline CdCO3

The aqueous solubility of CdCO₃(c) was studied in 0.01M NaClO₄, in solutions equilibrated with N₂-CO₂(g) mixtures that contained 0.0003, 0.001, or 0.138 atmospheres of CO₂(g). The pH ranged from about 4.5 to 9, and the studies were conducted from both the oversaturation and the undersaturation directions, with the equilibration periods ranging from 6 to 57 d. To determine the carbonato complexes of Cd(II), the solubility of CdCO₃(c) was also studied in 0.0016 to 1.00M Na₂CO₃ solutions at fixed hydroxide ion concentration, and in solutions with fixed aqueous C concentrations (0.1 and 0.01M C) over a range of OH^? from 1×10^?5 to 1.0M. The equilibrium Cd concentrations were reached in less than about 6 d. Pitzer's ion-interaction model was used to interpret these solubility data, as well as CdCO₃(c) solubility data reported in the literature, which extended to 5.0M K₂CO₃ with an ionic strength of approximately 18.6 m. Our thermodynamic model required the introduction of two aqueous Cd²⁺-CO ₃ ^2? complexes, CdCO₃(aq) and Cd(CO₃) ₂ ^2? , as well as ion-interaction parameters for Cd(CO₃) ₂ ^2? with the bulk cations Na⁺ and K⁺. This model gave excellent agreement with all available experimental data extending to 5.0M K₂CO₃. The logarithms of the thermodynamic equilibrium constants for the reactions: $$\begin{gathered} CdCO_3 \left( c \right) \rightleftarrows Cd^{2 + } + CO_3^{2 - } \hfill \\ Cd^{2 + } + CO_3^{2 - } \rightleftarrows CdCO_3 \left( {aq} \right) \hfill \\ Cd^{2 + } + 2CO_3^{2 - } \rightleftarrows Cd\left( {CO_3 } \right)_2^{2 - } \hfill \\ \end{gathered} $$ were found to be ?12.2₄±0.1, 4.7₁±0.1, and 6.4₉±0.1, respectively. The β⁰ ion-interaction parameters for Cd(CO₃) ₂ ^2? ?Na⁺ and Cd(CO₃) ₂ ^2? ?K⁺ were found to be ?0.14 and ?0.06, respectively.     

Extraction-photometric selective determination of trace perchlorates in potable waters

A method is proposed for the selective photometry determination of perchlorates in potable water with a detection limit of 2×10^?3 mg/L is proposed based on the extraction of its ion pair with the astrafloxin cation and absorbance measurements at 540 nm. The following ratios of matrix ions are acceptable (in parentheses): ClO^?, ClO ₂ ^? , ClO ₃ ^? , BrO ₃ ^? (500); I^? (1000); IO ₃ ^? (7000); HCO ₃ ^? , Cl^?,SO ₄ ^2? , NO ₃ ^? , Br^?, Na⁺, K⁺, Ca²⁺, Mg²⁺ (10000). The relative error of determination for ClO ₄ ^? is 20% in the range 4 × 10^-3-1 × 10^?2 mg/L and 10% in the range 1 × 10^-2–5 × 10^?2 mg/L.     

Thermodynamics of Selected Aqueous Rare-Earth Elements Containing Triflate Salts at T=(288.15, 298.15, 313.15 and 328.15) K and p=0.1 MPa

Aqueous acidified solutions of the rare-earth-element (REE) triflates (Gd(CF₃SO₃)_3(aq), Dy(CF₃SO₃)_3(aq), Nd(CF₃SO₃)_3(aq), Er(CF₃SO₃)_3(aq), Yb(CF₃SO₃)_3(aq) and Y(CF₃SO₃)_3(aq)) have been prepared by the dissolution of the corresponding REE oxides in dilute aqueous trifluoromethanesulfonic acid (triflic acid, CF₃SO₃H_(aq)). Relative densities and relative massic heat capacities have been measured for these systems over the approximate ionic strength range 0.10≤I/(mol?kg^?1)≤1.35 at T=(288.15, 298.15, 313.15 and 328.15) K and p=0.1 MPa. These measurements were completed using a Sodev O2D vibrating tube densimeter and Picker-flow microcalorimeter, respectively. Relative densities and relative massic heat capacities for aqueous solutions of triflic acid and its sodium salt have also been measured over the concentration range 0.018≤m ₂/(mol?kg^?1)≤0.23 over the same temperature range at p=0.1 MPa. Young’s rule has been used to calculate apparent molar volumes and apparent molar heat capacities of the aqueous solutions of REE triflate salts from the calculated apparent molar properties of the acidified salt solutions. These properties have been modeled using the Pitzer ion-interaction equations. The apparent molar properties of aqueous triflic acid solutions and aqueous solutions of its sodium salt have also been modeled using the same Pitzer ion-interaction equations. The apparent molar properties at infinite dilution obtained from our property modeling have been used to calculate single ion volumes and single ion heat capacities for each of the aqueous ions; Gd _(aq) ³⁺ , Dy _(aq) ³⁺ , Nd _(aq) ³⁺ , Er _(aq) ³⁺ , Yb _(aq) ³⁺ , and Y _(aq) ³⁺ . The reported single ion values have been compared with those previously reported in the literature.     

Covalent Bonding in Au(BO) 2 − and Au(BS) 2 −

We perform in this work a comprehensive first-principles investigation on the geometric and electronic structures of Au(BO) ₂ ^? and Au(BS) ₂ ^? which are valent isoelectronic to the well-known Au(CN) ₂ ^? monoanion. Au(BO) ₂ ^? and Au(BS) ₂ ^? complexes prove to possess linear ground-state structures similar to Au(CN) ₂ ^? and the BO^? and BS^? ligands in them are found to be coordinated terminally via boron atoms to gold centers which are weakly negatively charged. Au–B bonds in Au(BO) ₂ ^? and Au(BS) ₂ ^? appear to have higher Wiberg bond indices (0.79 and 0.80) and more covalent components (60 and 53 %) than the corresponding values of Au–C interaction in Au(CN) ₂ ^? (0.67 and 39 %, respectively) at the same theoretical levels. Their Au–B bifurcation values of the electronic localization function also turn out to be higher than Au–C. These results strongly suggest that the Au–B bonds in Au(BO) ₂ ^? and Au(BS) ₂ ^? with multiple-bond character possess stronger covalent characters than Au–C in Au(CN) ₂ ^? .     

Extractive and sorption preconcentration of rhenium(VII) ions with the use of bis(diphenylphosphoryl)-substituted aza podand

Interfacial distribution of trace amounts of ReO ₄ ^? ions between aqueous solutions of mineral acids and solutions of diphosphoryl-substituted aza podand [Ph₂P(O)CH₂CH₂OCH₂CH₂]₂NBu (I) in dichloroethane was studied. The stoichiometry of extracted complexes was determined, the influence of HClO₄, HNO₃, HCl, and H₂SO₄ concentration in aqueous phase and the nature of organic solvent on the efficiency of transition of ReO ₄ ^? ions into organic phase was considered. Aza podand I shows larger extraction ability toward Re(VII) than monophosphorylated amines. The possibility of selective extraction and preconcentration of ReO ₄ ^? ions by a complex-forming sorbent obtained by the noncovalent binding of compound I on the surface of carbon nanotubes was shown.     

Liquid secondary ion mass spectrometry of several β-diketonates of cobalt(III) and chromium(III)

The positive, liquid secondary ion (LSI) mass spectra of six cobalt(III) and three chromium(III) (β-diketonates ligand = L^?) were examined in a 3-nitrobenzyl alcohol matrix. The complexes of both metals yield clean, matrix-free mass spectra, but there are important differences between them. The cobalt compounds show prominent peaks assignable to the molecular ion, CoL ₃ ⁺ , of the monomeric chelates, together with abundant dimeric ions, such as Co₂L ₄ ⁺ and Co₂L ₃ ⁺ ; in contrast, chromium complexes show protonated monomers, CrL₃H⁺, in addition to ionized monomers, CrL ₃ ⁺ , and only minor formation of dimeric ions. The collisionally-activated dissociation (CAD) mass spectrum of Co₂L ₄ ⁺ shows fragmentation to CoL ₂ ⁺ and Co₂L ₃ ⁺ . That of Co₂L ₃ ⁺ shows fragmentation only to dimeric ions, including Co₂L ₂ ⁺ and, for thienyl or phenyl substituted ligands, to Co₂L₂Ar⁺ or Co₂LAr⁺ (Ar = thienyl or phenyl). Neither Co₂L ₄ ⁺ nor Co₂L ₃ ⁺ dissociates to the CoL ₃ ⁺ ion. The LSI mass spectrum of a mixture of two different cobalt chelates shows dimeric ions containing both types of ligand, which can be explained by ion-molecule reactions in the selvedge region. The differing behaviors of the cobalt and chromium complexes is attributed to the relatively greater stability of the +2 oxidation state for cobalt than for chromium.     

Spectrophotometric study of rare-earth element complexation in alkaline and near-neutral solutions

The hydrolytic behavior of La, Nd, Eu, Gd, Ho, and Tm in KOH solutions was studied at 25°C and a saturated vapor pressure using spectrophotometry with m-cresol purple and 2-naphthol as pH indicators. It was found that freshly prepared solutions of MCl₃ (M = La, Nd, Eu, Gd, Ho, and Tm) at pH 6.0–10.1 contain the ions M³⁺, M(OH)²⁺, M(OH) ₂ ⁺ , and M(OH) ₃ ⁰ , for Ho and Tm, the complex anions M(OH) ₄ ^? . were also detected. The formation constants of the hydroxide complexes a ionic strengths I = 0 were obtained as the parameters of linear regression equations that characterize the spectra of the indicators in the solutions under study.     

Adsorption affinity of anions on metal oxyhydroxides

The dependences of anion (phosphate, carbonate, sulfate, chromate, oxalate, tartrate, and citrate) adsorption affinity anions from geometric characteristics, acid-base properties, and complex forming ability are generalized. It is shown that adsorption depends on the nature of both the anions and the ionic medium and adsorbent. It is established that anions are generally grouped into the following series of adsorption affinity reduction: PO ₄ ^3? , CO ₃ ^2? > C₂O ₄ ^2? , C(OH)(CH₂)₂(COO) ₃ ^3? , (CHOH)₂(COO) ₂ ^2? > CrO ₄ ^2? ? SO ₄ ^2? .     

The enthalpy of formation of magnesium sulfate ion pairs

The enthalpies of dilution of lithium, sodium, potassium, and magnesium chloride and sulfate solutions in the range 0.1 to 1.0 m have been measured at 30°C with a microcalorimeter. The relative apparent enthalpies φ_L of these solutions have been determined with the aid of an extended form of the Debye-Hückel limiting law $$\phi _L = S_H I^{1/2} [1/(1 + I^{1/2} ) - (\sigma /3)] + {\rm B}{\rm I} + CI^{3/2} $$ whereS _H is the limiting-law slope, σ = 3/I^3/2 × [(1+I^1/2 ? 1/(1+I^1/2 ? 2 ln (2+I^1/2)], andB andC are empirical constants. This equation fits the experimental results to within a standard deviation of 2 cal-mole^?1 for all the salts. The measured φ_L for the MgSO₄ solutions were compared to those calculated using the additivity principle, φ_L(MgCl₂) + φ_L(Na₂SO₄) ? 2φ_L(NaCl), and the extended Debye-Hückel equation. The results of this comparison have been used to calculate the ΔH _A ^o for the formation of MgSO ₄ ⁰ . A value of ΔH _A ^o = 1.15 to 1.36 was obtained, depending upon the φ_L estimates for the free ions Mg²⁺ and SO ₄ ^2? . The results are briefly discussed and compared to the results obtained by other workers.     

Metastable and collision-induced fragmentation studies of all C4H12Si+ isomers; a systematic study of structure-reactivity relations

Metastable ion (MI) and collision-induced dissociation (CID) mass spectra have been recorded and compared for all nine C₄H₁₂Si^+. isomers. The (Me)₄Si^+., t-BuSiH ₃ ^+. , s-BuSiH ₃ ⁺ , and (Me)₂EtSiH^+. isomers have unique MI and CID mass spectra. The MI mass spectra, including the kinetic energy release values, of (Me)(i-Pr)SiH ₂ ^+. and (Me)(n-Pr)SiH ₂ ^+. are identical, which implies isomerization. MI data also suggest that a fraction of the n-BuSiH ₃ ^+. ions rearrange into branched (Me)₂EtSiH^+. ions and a fraction of the n-BuSiH ₃ ^+. ions rearrange into branched s-BuSiH ₃ ^+. ions. A comparison with the isomeric C₅H ₁₂ ^+. pentanes reveals a crucial difference: H₂ loss occurs for n-BuSiH ₃ ^+. , i-BuSiH ₃ ^+. , s-BuSiH ₃ ^+. , (Me)(n-Pr)SiH ₂ ^+. , (Me)(i-Pr)SiH ₂ ^+. , and Et₂SiH ₂ ^+. , but not for any of the C₅Hi ₁₂ ^+. isomers. Generation of four- or five-membered silicon containing rings is suggested for H₂ loss from the C₄H₁₂Si^+. silanes.     

A new method for electrocrystallization of AgTCNQF4 and Ag2TCNQF4 (TCNQF4 = 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) in acetonitrile

Semiconducting AgTCNQF₄ (TCNQF₄?=?2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane) has been electrocrystallized from an acetonitrile (0.1?M Bu₄NPF₆) solution containing TCNQF₄ and Ag(MeCN) ₄ ⁺ . Reduction of TCNQF₄ to the TCNQF ₄ ^1? anion, followed by reaction with Ag(MeCN) ₄ ⁺ forms crystalline AgTCNQF₄ on the electrode surface. Electrochemical synthesis is simplified by the reduction of TCNQF₄ prior to Ag(MeCN) ₄ ⁺ compared with the analogous reaction of the parent TCNQ to form AgTCNQ, where these two processes are coincident. Cyclic voltammetry and surface plasmon resonance studies reveal that the electrocrystallization process is slow on the voltammetric time scale (scan rate?=?20?mV?s^?1) for AgTCNQF₄, as it requires its solubility product to be exceeded. The solubility of AgTCNQF₄ is higher in the presence of 0.1?M Bu₄NPF₆ supporting electrolyte than in pure solvent. Cyclic voltammetry illustrates a dependence of the reduction peak potential of Ag(MeCN) ₄ ⁺ to metallic Ag on the electrode material with the ease of reduction following the order Au?<?Pt?<?GC?<?ITO. Ultraviolet-visible, Fourier transform infrared, and Raman spectra confirmed the formation of reduced TCNQF ₄ ^1? and optical microscopy showed needle-shaped morphology for the electrocrystallized AgTCNQF₄. AgTCNQF₄ also can be formed by solid?Csolid transformation at a TCNQF₄-modified electrode in contact with aqueous media containing Ag⁺ ions. Chemically and electrochemically synthesized AgTCNQF₄ are spectroscopically identical. Electrocrystallization of Ag₂TCNQF₄ was also investigated; however, this was found to be thermodynamically unstable and readily decomposed to form AgTCNQF₄ and metallic Ag, as does chemically synthesized Ag₂TCNQF₄.     

Using epichlorohydrin for a simultaneous increase of functional group hydrophilicity and spatial separation from the matrix of anion exchangers for ion chromatography

To increase the efficiency of anion exchangers based on copolymers of styrene and divinylbenzene in ion chromatography a new method for spatial separation and hydrophilization of functional groups using epichlorohydrin is suggested. Synthesis consists of acylation of a matrix by acetic anhydride, reductive amination by methylamine hydrochloride, alkylation of the aminated phase using epichlorohydrin, amination by dimethylamine at the terminal chlorine atom, and quaternization of the terminal amino group with epichlorohydrin. The obtained anion exchangers make it possible to simultaneously determine eight anions (F^?, HCOO^?, Cl^?, NO ₂ ^? Br^?, N ₃ ^? HPO ₄ ^3? and SO ₄ ^2? ) and demonstrate high efficiency (more than 62000 N/m for HPO ₄ ^2? ) in a suppressed ion-chromatography mode.     

Bimetallic cluster cations ejected from a liquid metal ion source: Li-Na and Li-Mg

Cluster ions of alloys (Li-Na, Li-Mg) have been produced by a liquid metal ion source (LMIS), and analyzed by mass spectrometry. For the Li-Na system, bimetallic clusters with various compositions were formed, and dominant bimetallic species were Na₂Li⁺, NaLi⁺, NaLi ₂ ⁺ and NaLi ₈ ⁺ with this sequence of ion intensity. These clusters are systems containing 2 or 8 valence electrons except for NaLi⁺. For the Li-Mg, observed bimetallic clusters were limited to only three species (MgLi⁺, MgLi ₂ ⁺ and Mg₂Li⁺), but unexpectedly small multiply charged homonuclear clusters, Mg ₂ ²⁺ and Mg ₃ ²⁺ , were observed.