Reaction of sulphuryl chlorofluoride with a few metals and metal oxides

Sulphuryl chlorofluoride has no observable reaction with metals and metal oxides at room temperature. Metals like copper, silver, iron, and zinc react with the chlorofluoride in the temperature range 200–400°C. Metal chlorides, metal fluorides and sulphur dioxide are the main products of these reactions. With the corresponding metal oxides, on the other hand, the respective metal sulphates are formed in addition to the metal chlorides and fluorides. In the case of lead and lead oxide, lead chlorofluoride is formed instead of lead chloride and lead fluoride. Sulphuryl fluoride is formed in small quantities in all these reactions by the decomposition of the chlorofluoride. Glass is not attacked by sulphuryl chlorofluoride below 500°C.During the course of our investigations on the reactivity of sulphuryl chlorofluoride, it is observed that sulphuryl chlorofluoride does not react with glass up to 500° C. However, it reacts with metals and metal oxides between 200° to 400° C. The reaction products with metals are the corresponding metal chlorides, metal fluorides and sulphur dioxide. With the oxides, in addition to the metal chlorides and metal fluorides, metal sulphates are formed. The results of these investigations are presented in this communication.     

Halogenation of isoflavones using thionyl and sulphuryl chlorides

The reactions of thionyl and sulphuryl chlorides on isoflavones have been found to give a number of new chloroisoflavones and isoflavanones, whose structures have been elucidated on the basis of their spectral analytical data.     

The heat of formation of sulphuryl fluoride and the stability of fluorosulphates

A standard enthalphy of -767.2 kJ mol^-1 was determined for sulphuryl fluoride from the heat of alkaline hydrolysis, and a standard free energy of -720.8 kJ mol^-1 derived. The thermodynamically preferred product of ionic fluorosulphate decompositions is always sulphuryl fluoride. Kinetic control must predominate when sulphur trioxide is the main product.     

A New Method for the Preparation of Sulphuryl Chloro Fluoride

It has been observed that a suspension of sodium fluoride in boiling acetonitrile could be used for the preparation of fluorine compounds such as silicon tetrafluoride [1], thiophosphoryl fluoride [2], sulphur tetrafluoride [3,4], and fluorocyclophosphazenes [5]. This method, when adopted for the fluorination of sulphuryl chloride [6], it is observed that a mixture of sulphuryl fluoride and sulphuryl chloro fluoride is obtained. On the other hand, when lead fluoride is substituted for sodium fluoride, pure sulphuryl chloro fluoride is evolved. Based on this observation, a new method has been standardised for the preparation of a pure sample of sulphuryl chlorofluoride by fluorinating sulphuryl chloride by lead fluoride in acetonitrile medium.     

A Vibrational Analysis of the Sulphuryl Halides I. Halides of type SO2X2(X = F,CI) II. Halides of mixed type SO2XF (X = CI,Br)

Calculations are reported on the molecular force fields of sulphuryl fluoride and sulphuryl chloride, using new data for the fluoride and a modified geometry for the chloride. Further calculations were performed for the mixedhalides SO₂XF (X = Cl, Br) on the basis of data and structural proposals of Birchall and Gillespie as well as Reed and Lovejoy.     

The direct synthesis of the cyclic sulphamidate of (S)-prolinol: SimultaneousN-protection and activation towards nucleophilic displacement of oxygen.

The preparation of the cyclic sulphamidate of (S)-prolinol has been achieved by reaction with sulphuryl chloride at low temperature. This material has been shown to be susceptible to acid catalysed nucleophilic attack to furnish 2-(NN-dialkylamino)methyl- and 2-(methoxymethy]pyrrolidines after hydrolysis of the intermediate sulphamic acid derivatives.     

Discovery and crystal structure of a novel chlorocarbon host: perchlorofluorene-9-spirocyclohexa-2′,5′-diene

Chlorination of triphenylene (1a) employing a mixture of aluminium trichloride and sulphur monochloride in sulphuryl chloride leads to rearrangement with formation of the title chlorocarbon (2), a new host, as main product. X-ray crystal structure analyses of the unsolvated spirocycle (2) as well as of its inclusion compounds with guests benzene and cyclohexa-1,4-diene are described.     

Chlorination of 2-Chloroquinoline-3-carbaldehydes

Reactions of 2-chloroquinoline-3-carbaldehydes (1) with chlorine, thionyl chloride and sulphuryl chloride are investigated. Preparation of 2-chloroquinoline-3-carbonyl chlorides (2) and 2-chloro-3-dichloromethylquinolines (5) as products of these reactions is described.     

Low temperature fluorination of sulphur compounds with elemental fluorine

Low temperature fluorination technique is adopted for fluorination of the following sulphur compounds in freon-11 medium (1) Sulphur dioxide (2) Thionyl chloride (3) Sulphuryl chloride (4) Tetrasulphur tetra nitride and (5) Sulphur bromide. All the compounds undergo oxidative fluorination to give rise to sulphur-fluorine compounds except sulphuryl chloride which resists fluorination. Sulphuryl chloride thus behaves as a good solvent medium for fluorination of other reactive compounds like elemental sulphur. Details of the experimental procedures adopted and the identification of the products will be presented.     

Stereospecific conversion of cyclic phosphorothioates into chlorophosphates

The reaction of the individual diastereoisomeric cyclic phosphorothioates 2a, 2b in the trans-2,4,7-trioxa-3-phosphabicyclo (4.4.0) decane and 4a, 4b in the trans-2,4,7-trioxa-3-phosphabicyclo (4.3.0) nonane series with sulphuryl chloride affords the corresponding sulphenyl chlorides 5a, 5b, 6a, 6b with retention of the configuration of the phosphorus atom. The reaction of the latter with phosphorus trichloride leads stereospecifically to the chlorophosphates 7a, 7b, 8a and 8b with full retention of configuration at phosphorus.     

氯化硫酰-甲缩醛法合成强碱型阴离子交换树脂

<正> 氯甲基苯乙烯-二乙烯苯共聚体(简称氯甲基共聚珠体)的合成,当采用传统的氯甲醚法时,由于混杂有容易致癌的二氯甲醚而不甚妥善.不直接使用氯甲醚的氯甲基化方法,虽已有些专利报道,但并不具体.本文研究氯化硫酰-甲缩醛法制备氯甲基共聚珠体,可在氯化硫酰、甲缩醛、催化剂无水氯化锌用量甚低的情况下,得到氯甲基共聚珠体含氯量稳定在16—17.7％,合成的强碱型阴离子交换树脂的交换当量稳定在3.3—3.5毫克当量/克(干树脂),而且发现甲缩醛中少量甲醇或水的存在对氯甲基化反应影响甚微.     

Synthesis of Dialkyl Phosphoroselenocyanatidates and Their Rearrangement to Dialkyl Phosphoroiso-selenocyanatidates

The synthesis of diaryl and dialkyl phosphoroisoseleno-cyanatidates (I) has been described only recently^1,2. However, their isomers, dialkyl or diaryl phosphoro-selenocyanatidates (II) are, to our knowledge, unknown. In our attempts of their synthesis we found that the preparation of II in the way analogous to the synthesis of the corresponding thiocyanatidates ³was not possible due to the inaccessibility of the 0,0-dineopentoxy-oxo-phosphoraneselenenyl chloride (III). Reaction of triethylamminium 0,0-dineopentyl-phosphoroselenoate (IVa) with sulphuryl chloride at -70[ddot]C in CH₂Cl₂ solution led     

Stereochemistry of organophosphorus cyclic compounds—II : Stereospecific synthesis of cis- and trans 2-halogeno-2-oxo-4-methyl-1,3,2-dioxaphosphorinans and their chemical transformations

cis- and trans-2-Chloro-2-oxo-4-methyl-1,3,2-dioxaphosphorinans have been obtained by stereospecific reactions of diastereomerically pure 2-methoxy-4-methyl-1,3,2-dioxaphosphorinans or 2-hydrogen-2-oxo-4-methyl-1,3,2-dioxaphosphorinans with chlorine and sulphuryl chloride, respectively. Similarly, the action of the corresponding brominating agents on isomeric phosphites and phosphonates afforded pure cis- and trans-2-bromo-2-oxo-4-methyl-1,3,2-dioxaphosphorinans. It has been shown that halogenolysis proceeds with retention of configuration at the P atom. On the basis of the ¹H- and ³¹P-NMR spectra conformation of the halogenoanhydrides obtained has been discussed briefly.It has been also found that model nucleophilic substitution reactions occur with inversion of configuration at the P atom in the cyclic halogenoanhydrides.     

General and efficient synthesis of arylamino- and alkylamino-substituted diphenylporphyrins and tetraphenylporphyrins via palladium-catalyzed multiple amination reactions

A series of arylamino- and alkylamino-substituted diphenylporphyrins and tetraphenylporphyrins were efficiently synthesized by reactions of brominated porphyrin precursors with amines via palladium-catalyzed amination. The multiple amination reactions are general and suitable for a variety of amines, affording the desired aminoporphyrins in good to excellent yields. Examples include aromatic and aliphatic amines, primary and secondary amines, electron-rich, -neutral, and -poor amines as well as heteroaromatic amines and imines.     

Thermometric titrations of amines with nitrosyl perchlorate in acetonitrile solvent

Thirteen aliphatic and four aromatic amines, namely diethylamine, triethylamine, n-propylamine, di-n-propylamine, tri-n-butylamine, isopropylamine, di-isopropylamine, n-butylamine, di-n-butylamine, tri-n-butylamine, isobutylamine, sec-butylamine, tert-butylamine, aniline, N,N-dimethylaniline, 2-nitroaniline and 4-nitroaniline were titrated thermometrically with nitrosyl perchlorate in acetonitrile solvent. All the aliphatic amines gave very well-shaped thermometric titration curves. The calculated recovery values of the amines were very good. In comparison, the aromatic amines, aniline and N,N-dimethylaniline gave rather well-shaped titration curves, but the recovery values were fairly low. 2-Nitro- and 4-nitro anilines gave no thermometric response at all. The heats of reaction of the amines with nitrosyl perchlorate are rather high. However, the average heat of reaction of the aromatic amines is approximately two-thirds that of the average heat of the aliphatic amines. To support this method all the amines were also titrated potentiometrically and very similar results to those obtained with the thermometric method are seen. The nitrosyl ion is a Lewis acid, strong enough to titrate quantitatively aliphatic amines in acetonitrile solvent, but not strong enough to titrate aromatic amines at the required level in the same solvent.     

胺及其衍生物的非酰基化动力学拆分

光学纯胺在合成与药物化学领域都有着广泛的应用,发展其高效的合成方法一直以来是有机化学界的研究热点.其中通过N酰基化及去酰基化动力学拆分方法获得光学纯胺化合物,已经成为合成手性胺类化合物的重要方法.近年来,基于非酰基化(或去酰基化)的不对称反应实现外消旋胺的动力学拆分的报道不断涌现,包括一些氨基不参与反应的非酰基化(或去酰基化)不对称反应的外消旋胺的动力学拆分.根据氮原子是否参与反应以及反应类型的不同,总结了外消旋胺的化学催化动力学拆分的研究进展.     

Chemospecific and ligand free CuI catalysed heterogeneous N-arylation of amines with diheteroaryl halides at room temperature

A ligand free, copper-catalyzed N-arylation reaction of amines with diheteroaryl halides in heterogeneous medium at room temperature has been developed. The protocol is very effective for low boiling amines and useful for amines available in aqueous solution. The reaction gives chemospecific arylation of amines with diheteroaryl halides in the mixture monoheteroaryl halides, diheteroaryl halides and carbocyclic aryl halides. The reaction is also chemospecific with respect to arylation of aliphatic amines. Monoarylated piperazines were also synthesized at room temperature following this protocol.     

Reactions of the carbonate radical with aliphatic amines

Carbonate radicals react with aliphatic amines by a dual mechanism, viz. (i) hydrogen abstraction and (ii) electron transfer. The former is more probable with primary amines. Tertiary amines react via electron transfer. Both mechanisms may operate in secondary amines. Cyclic tertiary amines react with different rates and their relative reactivities are explained on the basis of the concept of Hoffmann's ‘through bond’ interaction.     

Palladium-catalyzed reaction of allyl carbamates; allylation of carbonucleophiles,and protection-deprotection of amines

Allylation of carbonucleophiles with allylic carbamates under neutral conditions has been studied. The C-allylation of carbonucleophile is competitive with the N-allylation of amines, and the structure of amines is crucial for the selectivity. Bulky secondary amines gave the best results. Also a new method of protection-deprotection of amines as carbamates has been developed. Smooth deprotection is possible by the palladium-catalyzed reaction of allyl carbamates with formic acid. This method is particulary useful for primary amines, including optically active amino acids.     

Blue Chitin Columns for the Extraction of Heterocyclic Amines from Urine Samples

During normal cooking of meat, a class of mutagenic/carcinogenic compounds called heterocyclic amines is formed. Heterocyclic amines are rapidly absorbed and metabolised in the human body, and for estimation of the intake of heterocyclic amines, it is useful to determinate their levels in the urine. Blue Chitin columns were used for the extraction and purification of heterocyclic amines from urine samples spiked with 14 different heterocyclic amines. The samples were analysed using LC-MS. The results show that Blue Chitin columns provide a straightforward and rapid means of extracting heterocyclic amines from urine samples, and that Blue Chitin column are also useful in the purification of urinary metabolites.