The formation of penta-twinned gold particles

The formation of gold particles containing five radially arranged twin boundaries (called penta-twinned particles) has been investigated by means of high-resolution transmission electron microscopy. The particles were produced by evaporation of gold in helium at low pressure (0.5 kPa). The processes involved in the formation of the particles are deduced from the experimentally observed size distribution, the characteristic particle morphologies and the frequency of different particle structures. The penta-twinned particles are suggested to be formed by the collision and rearrangement of small single crystals in the helium atmosphere.     

A universal route with fine kinetic control to a family of penta-twinned gold nanocrystals

Some of the major difficulties hindering the synthesis of different types of colloidal nanocrystals are their complex synthetic methods and the lack of a universal growth mechanism in one system. Herein, we propose a general strategy of kinetically controlled seed-mediated growth to synthesize a family of penta-twinned gold nanocrystals. Specifically, different kinds of penta-twinned nanocrystals (truncated penta-twinned decahedra, truncated bipyramids, bipyramids, truncated bipyramids with tips, star-like penta-twinned nanocrystals, decahedra with concave edges, and decahedra) with tunable sizes and high purity were readily achieved in one system solely by tailoring the deposition kinetics of adatoms on different sites of decahedral seeds. The controllable deposition kinetics can be realized by changing the ratio of reductant/gold precursors (R), which dictates whether horizontal or vertical features along the 5-fold axis direction of Au decahedral seeds are produced. Additionally, the selective growth of a second metal (silver) on penta-twinned gold seeds can be reached through minor modification of R, which opens a new avenue for mechanistic investigation by visualizing the seed localization within the final particles. The present work demonstrates a general paradigm for the kinetic growth of penta-twinned crystals and would be extended to the synthesis of other families of nanocrystals.

We report the synthesis of linear ADPr oligomers of defined length up to a pentamer using an improved solid phase method. Binding study with human oncogenic helicase ALC1 shows that ADPr oligomers bind to ALC1 in a length-dependent manner.     

Growth of silver nanowires from solutions: a cyclic penta-twinned-crystal growth mechanism

Silver nanowires are synthesized by simple reduction of the silver ions with reductants such as glucose, sodium citrate, and sodium hypophosphite, etc., in the absence of the so-called surfactants or capping reagents at the temperature from 80 to 200 degrees C. Regardless of the reductants, the nanowires prepared at a given temperature are uniform in diameters, ranging from 30 to 50 nm at 100 degrees C. Nanoparticles coexist with nanowires in the products with larger diameters (usually larger than 50 nm). We find that all the silver nanowires in the as-prepared products are of cyclic penta-twinned structure, where five crystallites bond by the {111} facets. We propose that the intrinsic factor of the cyclic penta-twinned structure, i.e., the angular mismatch of the five crystallites in forming a gapless rod, controls the size of the nanowires and guides the directional growth of the nanowires with {110} as the active facets. The nanoparticles in the products are aggregates of imperfect penta-twinned crystals, which inhibits them from growing into nanowires and results in larger size. From the structural information of the nanoparticles synthesized at room temperature, we propose that the formation of the cyclic penta-twinned structure is due to the stacking fault and the intrinsic equilibrium structures of the lower energy.     

Shape controlled growth of gold nanoparticles by a solution synthesis

The shape of gold nanoparticles has been successfully tuned among penta-twinned decahedrons, truncated tetrahedrons, cubes, octahedrons, hexagonal thin plates by introducing a small amount of salt into a N,N-dimethylformamide (DMF) solution containing poly(vinyl pyrrolidone) (PVP), and changing the temperature or the concentration of the gold precursor.     

Growth of gold nanorods and bipyramids using CTEAB surfactant

Gold nanorods and bipyramids have been synthesized using the seed-mediated approach in aqueous cetyltriethylammonium bromide (CTEAB) solutions in the presence of silver nitrate. Gold nanoparticle seeds that are stabilized with either CTEAB or sodium citrate have been used. The use of the CTEAB-stabilized seeds gives gold nanorods in high yield in one step with the longitudinal plasmon wavelength ranging from 750 to 1030 nm, depending on the amount of the seeds. The longitudinal plasmon wavelength can be extended to 1100 nm by the use of a two-step growth method. The growth of gold nanorods in CTEAB solutions takes 5-10 h, more than 5 times slower than that in cetyltrimethylammonium bromide solutions at the same concentration of surfactants. The use of the citrate-stabilized seeds gives both gold bipyramids and a small percentage of gold nanorods. The longitudinal plasmon wavelength of the bipyramids is tunable from 700 to 1100 nm by varying the amount of the citrate-stabilized seeds. The growth of gold bipyramids takes more than 1 day. Transmission electron microscopy characterizations reveal that the gold nanorods grown from both types of gold nanoparticle seeds are single-crystalline and that the gold bipyramids are penta-twinned.     

Imaging atomic structure in metal nanoparticles using high-resolution cryo-TEM.

It has been shown, by imaging gold (200) planes, that it is possible to achieve better than 0.20-nm structural resolution in cryo-transmission electron microscopy (cryo-TEM). This has been done using commercially available cryo equipment and using a 300-kV field emission gun (FEG) TEM. The images of 15-nm gold particles embedded in amorphous frozen water clearly show the (111) planes (separated by 0.235 nm) in gold. Fourier transform demonstrates the presence of (200) planes in the image, proving a resolution of better than 0.20 nm. The experimental results are supported by image simulations using the multislice method. These simulations suggest that it should be possible to achieve the same resolution even in smaller particles and particles of lighter elements. The crucial experimental problem to overcome is keeping the thickness of the amorphous film low and to work at low electron dose conditions.     

The effect of ozone on plasmon absorption of gold hydrosols. Quasi-metal and metal nanoparticles

The character of the interaction between ultrasmall gold nanoparticles and ozone is shown to be mainly governed by the particle structure. For borohydride sols of gold nanoparticles with sizes of ??3 nm, which are characterized by metallic properties, this interaction is reduced to reversible adsorption of ozone on their surface. At the same time, ozone adsorption on ??nonplasmon?? Au particles that have a diameter of 2 nm and a very defective structure results in their irreversible structural rearrangement and transition to a metallic state, which is accompanied by the appearance of a surface plasmon resonance. The set of the results obtained shows that nanoparticles of borohydride gold sols are more efficient as possible hemosensors of ozone than are larger particles synthesized by the citrate method.     

In Situ Formation of Gold Nanoparticles within a Polymer Particle and Their Catalytic Activities in Various Chemical Reactions

Composite materials consisting of nanoscale gold particles and protective polymer shells were designed and tested as catalysts in various chemical reactions. Initially, the systematic incorporation of multiple gold nanoparticles into a poly(N-isopropylacrylamide) particle was achieved by an in situ method under light irradiation. The degree of gold nanoparticle loading, along with the structural and morphological properties, was examined as a function of the amount of initial gold ions and reducing agent. As these gold nanoparticles were physically-embedded within the polymer particle in the absence of strong interfacial interactions between the gold nanoparticles and polymer matrix, the readily-accessible surface of the gold nanoparticles with a highly increased stability allowed for their use as recyclable catalysts in oxidation, reduction, and coupling reactions. Overall, the ability to integrate catalytically-active metal nanoparticles within polymer particles in situ allows for designing novel composite materials for multi-purpose catalytic systems.     

CO combustion on supported gold clusters.

Recent progress in the understanding of the fascinating catalysis of CO combustion by supported gold particles is summarized. Focusing on size-selected gold clusters consisting of only a few atoms, that is, the size regime with properties nonscalable from the bulk properties, we discuss the current knowledge of the different factors controlling the reactivity at the molecular level. These factors include the role of the oxide support, its defects, cluster charging as well as the structural fluxionality of clusters, the cluster size dependency, and the promotional effect of water. By combining experimental results with quantum mechanical ab initio calculations, a detailed picture of the reaction mechanism emerges. While similar mechanisms might be active for gold nanoparticles in the scalable size regime, it is shown that for different systems (defined by the cluster size, the support, experimental conditions, etc.) the reaction mechanism differs and, hence, no generalized explanation for the catalytic driving force of small gold particles can be given.     

Reversible transformations of gold nanoparticle morphology

Herein is reported a metamorphosis taking place in a gold nanosized system. The observed phenomenon of shape and size transformations was found to be completely reversible. Unlike most procedures in the literature where shape and size control occur in the synthetic step by adding growth- and shape-controlling agents such as surfactants or polymers, in this system postsynthetic changes in shape and size can be carried out simply by changing the ratio of reactive, competing reagents, more specifically, alkylthiols versus tetralkylammonium salts. Interestingly, the transfer of gold metal occurs (large prismatic particles to small particles and vice versa) under the influence of reagents that do not cause such interactions with bulk gold. All intermediate steps of the morphology change were observed using HRTEM and electron diffraction. The processes of breaking down and "welding back" solid metal nanoparticles occur under mild conditions and are remarkable examples of the unique chemical properties of nanomaterials. The described process is expected to be relevant to other nanoscale systems where similar structural circumstances could occur.     

Kinetics study of the binding of multivalent ligands on size-selected gold nanoparticles

The effect of ligand multivalency and nanoparticle size on the binding kinetics of thiol ligands on gold nanoparticles is investigated by exchanging monovalently bound pyrene on gold nanoparticles against flexible mono- and multivalent thiol ligands. Variable-sized gold nanoparticles of 2.2 ± 0.4, 3.2 ± 0.7, and 4.4 ± 0.9 nm diameter are used as substrates. The particles are coated by thiol functionalized pyrene ligands and the binding kinetics of the thiol ligands is studied by time-resolved fluorescence spectroscopy. The effect of multivalency on the binding kinetics is evaluated by comparing the rate constants of ligands of different valency. This comparison reveals that the multivalent ligands are exchanging substantially more rapidly than the monovalent ones. A particle size dependence of the rate constants is also observed, which is used to derive structural information on the binding of the mono- and multivalent ligands to the nanoparticle surface.     

Bimodal Size Distribution of Gold Nanoparticles under Picosecond Laser Pulses

The evolution of size distributions of gold nanoparticles under pulsed laser irradiation (Nd:YAG, lambda = 355 nm, pulse width 30 ps) was carefully observed by transmission electron microscopy. Interestingly, the initial monomodal size distribution of gold nanoparticles turned into a bimodal one, with two peaks in the number of particles, one at 6 nm and the other at 16-24 nm. The sizes for small particles depended very little on the irradiated laser energy. This change is attributed to laser-induced size reduction of the initial gold nanoparticles followed by the formation of small particles. In our analysis, we extracted a characteristic value for the size-reduction rate per one pulse and revealed that laser-induced size reduction of gold nanoparticles occurred even below the boiling point. When laser energy is insufficient for the boiling of particles, formation of gold vapor around liquid gold drops is thought to cause the phenomenon. With enough laser energy for the boiling, the formation of gold vapor around and inside liquid gold drops is responsible for the phenomenon. We also observed particles with gold strings after one pulse irradiation with a laser energy of 43 mJ cm(-2) pulse(-1), which is sufficient energy for the boiling. It is considered that such particles with gold strings are formed by the projection of gaseous gold from liquid gold drops with some volume of liquid gold around the bubble. On the basis of comparison with previous work, picosecond laser pulses are thought to be the most efficient way to cause laser-induced size reduction of gold nanoparticles.     

Preparation and properties of silica–gold core–shell particles

Silica-metal core–shell particles, as for instance those having siliceous core and nanostructured gold shell, attracted a lot of attention because of their unique properties resulting from combination of mechanical and thermal stability of silica and magnetic, electric, optical and catalytic properties of metal nanocrystals such as gold, silver, platinum and palladium. Often, the shell of the core–shell particles consists of a large number of metal nanoparticles deposited on the surface of relatively large silica particles, which is the case considered in this work. Namely, silica particles having size of about 600 nm were subjected to surface modification with 3-aminopropyltrimethoxysilane. This modification altered the surface properties of silica particles, which was demonstrated by low pressure nitrogen adsorption at ?196 °C. Next, gold nanoparticles were deposited on the surface of aminopropyl-modified silica particles using two strategies: (i) direct deposition of gold nanoparticles having size of about 10 nm, and (ii) formation of gold nanoparticles by adsorption of tetrachloroauric acid on aminopropyl groups followed by its reduction with formaldehyde.The overall morphology of silica–gold particles and the distribution of gold nanoparticles on the surface of modified silica colloids were characterized by scanning electron microscopy. It was shown that direct deposition of colloidal gold on the surface of large silica particles gives more regular distribution of gold nanopartciles than that obtained by reduction of tetrachloroauric acid. In the latter case the gold layer consists of larger nanoparticles (size of about 50 nm) and is less regular. Note that both deposition strategies afforded silica–gold particles having siliceous cores covered with shells consisting of gold nanoparticles of tunable concentration.     

Au/Al2O3催化剂的制备及其在CH4/CO2重整反应中的催化活性

采用浸渍法和沉积－沉淀法制备了四种不同的Au/Al2O3催化剂，测定了它们在氢气还原前后及催化反应后的金含量及比表面积，结果表明，制备方法明显影响催化剂的金含量，应用X－光粉末衍射技术研究了这些催化剂经还原处理及反应后的物相变化，金以Au^0物相存在，没有发现氧化态的金物相，考察了该催化剂在CH4／CO2重整反应中的催化活性，发现金催化剂的活性取决于金粒子的大小，浸渍法制备的金催化剂具有较大的金晶粒尺寸，催化活性低，沉积－沉淀法制备的金催化剂金晶粒尺寸较小，催化活性较高，以尿素为沉淀剂制备的催化剂给出1073K时的CH4和CO2转化率分别为8．1％和17．6％，高温反应不仅导致金晶粒的聚集，而且存在明显的金流失现象。     

Electrodeposition of gold particles on aluminum substrates containing copper

Electrodeposition of adhesive metal films on aluminum is traditionally preceded by the zincate process, which activates the aluminum surface. This paper presents an alternative approach for activation of aluminum by using films containing 99.5% aluminum and 0.5% copper. Aluminum/copper films are made amenable for subsequent electrodeposition by anodization followed by chemical etching of aluminum oxide. The electrodeposition of gold is monitored with electrochemical impedance spectroscopy (EIS). Analysis of EIS data suggests that electrodeposition of gold increases the interfacial capacitance from values typical for electrodes with thin oxide layers to values typical for metal electrodes. Scanning electron microscopy examination of aluminum/copper films following gold electrodeposition shows the presence of gold particles with densities of 10(5)-10(7) particles cm(-2). The relative standard deviation of mean particle diameters is approximately 25%. Evaluation of the micrographs suggests that the electrodeposition occurs by instantaneous nucleation followed by growth of three-dimensional semispherical particles. The gold particles, which are electrically connected to the conductive aluminum/copper film, support a reversible faradaic process for a soluble redox couple. The deposited gold particles are suitable for subsequent metallization of aluminum and fabrication of particle-type films with interesting catalytic, electrical, and optical properties.     

Microwave-induced synthesis of highly dispersed gold nanoparticles within the pore channels of mesoporous silica

Highly dispersed gold nanoparticles have been incorporated into the pore channels of SBA-15 mesoporous silica through a newly developed strategy assisted by microwave radiation (MR). The sizes of gold are effectively controlled attributed to the rapid and homogeneous nucleation, simultaneous propagation and termination of gold precursor by MR. Diol moieties with high dielectric and dielectric loss constants, and hence a high microwave activation, were firstly introduced to the pore channels of SBA-15 by a simple addition reaction between amino group and glycidiol and subsequently served as the reduction centers for gold nanoparticles. Extraction of the entrapped gold from the nanocomposite resulted in milligram quantities of gold nanoparticles with low dispersity. The successful assembly process of diol groups and formation of gold nanoparticles were monitored and tracked by solid-state NMR and UV-vis measurements. Characterization by small angle X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the incorporation of gold nanoparticles would not breakup the structural integrity and long-range periodicity of SBA-15. The gold nanoparticles had a narrow size distribution with diameters in the size range of 5-10 nm through TEM observation. The average particles size is 7.9 nm via calculation by the Scherrer formula and TEM measurements. Nitrogen adsorption and desorption isotherms gave further evidence that the employed method was efficient and gold nanoparticles were successfully incorporated into the pore channels of SBA-15.     

Synthesis of hybrid gold-gold sulfide colloidal particles

The nucleation and growth mechanism of nanometer size gold onto gold sulfide colloidal particles by irradiation-induced reduction is reported. The process is characterized by ultraviolet-visible spectroscopy, electronic diffraction, and high-resolution transmission electron microscopy, allowing for observation of several key intermediates and characteristics of the growth mechanism. The formation mechanism of gold on the surface of the gold sulfide particles is shown to depend strongly on the deposition rate. At low dose rate, gold nucleates preferentially onto specific gold-rich Au2S facets {110}, resulting in epitaxial growth. The gold crystal lattice plastically deforms near the interface to accommodate a substantial lattice mismatch. Upon increasing gold precursor concentration, this low dose rate results in growth of elongated gold island on the gold sulfide surface. At a high dose rate, several randomly oriented gold particles are simultaneously produced on gold sulfide, resulting in a layered structure. The absorption spectra of these particles show a dominant surface plasmon band, whose peak wavelength shifts markedly to the red as layered structure is formed.     

Revisiting the structural instability observed in small particles in the electron microscope

We present experimental results of the structural instability of gold clusters in the electron microscope. Observations of surface melting in a dynamic HREM study of small gold particles (2–5 nm) are provided. We argue that the temperature regime of the particle during observation, remains quite high at about 50–100 K below the particle's melting temperature. At this temperature, a further 15–30 eV would be enough to raise the particle's temperature above the melting point. We conclude that the structural instabilities observed are due to a mechanism based on a recrystallization from a highly excited state.     

Colloid stability of thymine-functionalized gold nanoparticles

Gold nanoparticles surface-coated with thyminethiol derivatives containing long hydrocarbon chains have been prepared. The diameter of the particles is 2.2 and 7.0 nm, respectively, with a relatively narrow size distribution. Thyminethiol derivatives are attached to the gold particle surfaces with thymine moieties as the end groups. The colloid stability of the gold nanoparticles as a function of the type and concentration of monovalent salt, pH, and particle size was investigated in alkaline, aqueous solutions. The gold particles are stable in concentrated NaCl and KCl solutions, but are unstable in concentrated LiCl and CsCl solutions. The larger gold particles are more sensitive to salt concentration and aggregate at lower salt concentrations. The reversible aggregation and dispersion of the gold particles can be controlled by changing the solution pH. The larger gold particles can be dispersed at higher pH and aggregate faster than the smaller particles, due to stronger van der Waals forces between the larger particles. Hydration forces play an important role in stabilizing the particles under conditions where electrostatic forces are negligible. The coagulation of the gold nanoparticles is attributed to van der Waals attraction and reduced hydration repulsion in the presence of LiCl and CsCl.     

Relationship between structure and CO oxidation activity of ceria-supported gold catalysts

Gold catalysts supported on cerium oxide were prepared by solvated metal atom dispersion (SMAD), by deposition-precipitation (DP), and by coprecipitation (CP) methods and were characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR), and X-ray photoelectron spectroscopy (XPS). The catalytic activity was tested in the CO oxidation reaction. The structural and surface analyses evidenced the presence of a modified ceria phase in the case of the DP sample and the presence of pure ceria and gold metal crystallites in the case of the SMAD and CP samples. The DP sample, after a mild treatment in air at 393 K, exhibited only ionic gold, and it was very active below 273 K. By comparing the activities of the different catalysts, it is suggested that the presence of small gold particles, as obtained by the SMAD technique, is not the main requisite for the achievement of the highest CO conversion. The strong interaction between ionic gold and ceria, by enhancing the ceria surface oxygen reducibility, may determine the particularly high activity.