Unexpected influence of stereochemistry on the cytotoxicity of highly efficient Ti(IV) salan complexes: new mechanistic insights

The effect of stereochemistry on the cytotoxicity of highly active and hydrolytically stable N-methylated Ti(IV) salan complexes is reported. Four bis(isopropoxo) complexes incorporating N-methylated salan ligands with different aromatic substitution patterns have been prepared in racemic and optically active forms for the first time by ligand-to-metal chiral induction from trans-diaminocyclohexyl-based chiral ligands. The configuration of the metal center that derives from that of the ligand has an enormous influence on cytotoxicity, with the racemic mixture mostly being more active than the single enantiomers that are of either similar or different activity. This implies that the active species is a salan-bound heterochiral polynuclear compound, interacting with a chiral target. Four additional complexes of achiral salan and chiral labile sec-butoxo ligands, analyzed as racemic and as homochiral, revealed no influence of stereochemistry, supporting early dissociation of the labile ligands to give the polynuclear products.     

Separation of reboxetine enantiomers by means of capillary electrophoresis

The novel antidepressant reboxetine, a selective norepinephrine reuptake inhibitor, is increasingly used in the treatment of different forms of major depression. Reboxetine is a chiral compound, and is marketed as a racemic mixture of (R,R)- and (S,S)-reboxetine; however, the pharmacokinetic and toxicological profiles of the two enantiomers are rather different. For this reason, a simple capillary electrophoretic method for the separation of reboxetine enantiomers has been developed. Sulfobutyl ether-beta-cyclodextrin was chosen as the chiral selector, and several parameters, such as cyclodextrin and buffer concentration, buffer pH and capillary temperature were investigated in order to obtain good separation and acceptable run times. Using an uncoated, fused-silica capillary (internal diameter 50 microm, total length 48.5 cm, effective length 40.0 cm) and a background electrolyte consisting of a pH 3.0, 100 mM phosphate buffer containing 1.25 mM cyclodextrin, reboxetine enantiomers were baseline separated (resolution > 4) with a voltage of 20 kV in less than 16 min. Since pure enantiomers of reboxetine were not available, they were obtained from the racemic powder by means of direct-phase, high-performance liquid chromatography and their identity confirmed by circular dichroism spectra.     

Chiral induction from ligands to metal centres. A copper(II)–nitroxide complex

Copper(II) complexes of a racemic mixture of a chiral nitronyl-nitroxide are characterised. One, A, is a centro-symmetrical species where two enantiomers are coordinated to a metal centre. The second, B, is a 1D compound comprising bridging ligands through the oxyl and pyridyl donor sites. One observes that, although the crystals are racemic, within a chain, all ligands and metal centres have respectively the same chirality. Possibilities of obtaining optically active extended structures through chiral induction from nitroxide ligands to metal ions are discussed in relation with molecular spin transition species.     

Application of thin-layer chromatography in enantiomeric chiral analysis-an overview

Several chiral drugs are produced and administered as pure enantiomers, whereas many others, especially of synthetic origin, are used mainly in the form of racemates. The biological and pharmacological activity of chiral compounds depends on their configuration. The racemic drugs may exhibit quite different activity from the optically pure drugs. Often only one of the enantiomers is pharmacologically active and/or even can be toxic. Since numerous enantiomers have been shown to behave differently from at least one point of view, whether pharmacokinetic, pharmacodynamic, toxicological or interaction, there seems to be hardly any exception to the general rule that a racemate cannot be considered as a single drug entity. A variety of chromatographic methods have been developed for optical resolution recently. Usually direct separation of the enantiomers is carried out on HPTLC chiral precoated plates or on plates impregnated with chiral substances. TLC techniques are a developing branch of separation and quantitation of drugs, both in pharmaceutical dosage forms and in biological material. This review presents an overview of the current successful enantioseparations of drugs by TLC and their potential in the analysis of the drug racemates.     

Palladium-catalyzed enantioselective allylic alkylation of thiocarboxylate ions: asymmetric synthesis of allylic thioesters and memory effect/dynamic kinetic resolution of allylic esters

The palladium-catalyzed allylic alkylation of KSAc and KSBz with racemic cyclic and acyclic allylic esters by using N,N'-(1R,2R)-1,2-cyclohexandiylbis[2-(diphenylphosphino)-benzamide] as ligand frequently gave the corresponding allylic thioesters with high ee values and yields. The reaction of the cyclic allylic carbonates with KSAc in the presence of H(2)O was accompanied by a partial palladium-catalyzed enantioselective "hydrolysis" of the substrates with formation of the corresponding enantioenriched allylic alcohols. The degree of the "hydrolysis" was strongly dependent on the solvent and the thiocarboxylate ion. Highly selective kinetic resolutions (KRs) were observed in the palladium-catalyzed reaction of the racemic cyclohexenyl and cycloheptenyl acetates with KSAc. While the KR of the cyclohexenyl acetate is characterized by a selectivity factor S = 72 +/- 19, that of the cycloheptenyl acetate afforded (R)-cycloheptenyl acetate of >or=99% ee in 48% yield and (S)-cycloheptenyl thioacetate of 98% ee in 50% yield. The palladium-catalyzed reaction of the racemic cyclopentenyl acetate with KSAc showed a strong "memory effect" (ME), that is, both enantiomers reacted with different enantioselectivities. The ME was probed by studying the palladium-catalyzed reactions of both the matched acetate of >or=99% ee and the mismatched acetate of >or=99% ee with KSAc. The acetates not only reacted with different enantioselectivities and rates but also suffered an unexpected and concomitant palladium-catalyzed racemization in the presence of the chiral ligand. This led in the case of the mismatched acetate to a temporary dynamic kinetic resolution (DKR) that featured a racemization of the mismatched acetate by the chiral catalyst. Studies of the palladium-catalyzed reaction of the racemic cyclopentenyl acetate, carbonate, and naphthoate with KSAc in the presence of the chiral ligand also showed the ME to be strongly dependent on the nucleofuge. This also allowed the synthesis of (S)-cyclopentenyl thioacetate of 92% ee in high yield from the racemic cyclopentenyl naphthoate.     

Retention of ionizable compounds in high-performance liquid chromatography. 14. Acid-base pK values in acetonitrile-water mobile phases

Using competitive frontal analysis, the binary adsorption isotherms of the enantiomers of 1-phenyl-l-propanol were measured on a microbore column packed with a chiral stationary phase based on cellulose tribenzoate. These measurements were carried out using only the racemic mixture. The experimental data were fitted to four different isotherm models: Langmuir, BiLangmuir, Langmuir-Freundlich and Tóth. The BiLangmuir and the Langmuir-Freundlich models accounted best for the competitive adsorption data. An excellent agreement between the experimental and the calculated overloaded band profiles for various samples of racemic mixture was obtained when the equilibrium dispersive model of chromatography was used together with the BiLangmuir competitive isotherm. The isotherm parameters measured under competitive conditions were used to calculate the overloaded band profiles of large samples of the pure S- and R-enantiomers, too. A satisfactory agreement between the experimental and calculated band profiles was observed when using in the computation the corresponding single component BiLangmuir isotherm derived from the binary isotherm previously determined. Thus oniy data derived from the racemic mixture are required for computer optimization of the preparative chromatography separation of the enantiomers.     

Chiral monomeric and homochiral dimeric copper(II) complexes of a new chiral ligand, N-(1,2-bis(2-pyridyl)ethyl)pyridine-2-carboxamide: an example of molecular self-recognition

Reaction of Cu(ClO(4))(2) x 6H(2)O with a racemic mixture of the novel chiral ligand N-(1,2-bis(2-pyridyl)ethyl)pyridine-2-carboxamide (PEAH) affords only the homochiral dimeric copper(II) complexes [Cu(2)((R)()PEA)(2)](ClO(4))(2) and [Cu(2)((S)()PEA)(2)](ClO(4))(2) in a 1:1 ratio. The phenomenon of molecular self-recognition is also observed when a racemic mixture of the monomeric copper(II) complex [Cu((R(S))()PEA)(Cl)(H(2)O)] is converted into the homochiral dimeric species [Cu(2)((R(S))()PEA)(2)](ClO(4))(2) via reaction with Ag(+) ion. This is the first report of direct conversion of a racemic mixture of a chiral monomeric copper(II) complex to a mixture of the homochiral dimers.     

Pi-stacking induced NMR spectrum splitting in enantiomerically enriched Ru(II) complexes: evaluation of enantiomeric excess

Several chiral octahedral complexes of the general formula [Ru(bpy)2 (Lig)][PF6]2 (Lig = a ligand that can participate in pi-stacking interactions such as eilatin, isoeilatin, and tpphz) were synthesized in both the racemic and enantiomerically pure/enriched forms. Nonracemic mixtures of enantiomers of all these complexes exhibit splitting of the 1H NMR spectra (NMR nonequivalence); i.e., each spectrum contains a major and a minor set of peaks. The origin of this phenomenon is attributed to a fast equilibrium between monomers and discrete dimers held together by pi-stacking interactions, and it is observed for a wide range of pi-stacking interaction strengths. The NMR spectrum splitting exhibited by these complexes can be exploited for the evaluation of their enantiomeric excess simply from the integral ratio, without addition of chiral shift reagents.     

Modeling of the separation of two enantiomers using a microbore column

A microbore column packed with Chiralcel OB (cellulose tribenzoate coated silica) was used for the measurement of the single and competitive equilibrium-isotherm data of the 1-indanol enantiomers by frontal analysis. The amount of sample needed for the isotherm data acquisition was about 20 times less than that required with a conventional column. The data obtained were fitted to different single and competitive isotherm models. Both the single and the competitive data sets fitted best to the same Bilangmuir (BL) isotherm model with small differences in the numerical values of the parameters. The best fitted Bilangmuir single and competitive isotherm models were used to predict the overloaded experimental profiles of both pure enantiomers, of the racemic mixture, and of different enantiomeric mixtures. All the calculated profiles were in excellent agreement with the experimental ones. This agreement confirms that in many chiral separations, the competitive isotherms can be derived from data acquired from the mere racemic mixture with a sufficient accuracy for a correct prediction of the band profiles of all kinds of enantiomer mixtures, making possible the computer-assisted optimization of the experimental conditions.     

Structures formed by the chiral assembly of racemic mixtures of enantiomers: iodination products of elaidic and oleic acids

The self-assembled monolayer structure of the products of elaidic acid iodination (the racemic mixture of 9,10-(9S,10R)-diiodooctadecanoic acid and 9,10-(9R,10S)-diiodooctadecanoic acid) and the products of oleic acid iodination (the racemic mixture of 9,10-(9R,10R)-diiodooctadecanoic acid and 9,10-(9S,10S)-diiodooctadecanoic acid) are studied by high-resolution scanning tunneling microscopy. For the iodination products of elaidic acid, the separation of enantiomers into distinct chiral domains during the formation of the 2-D crystal on the highly ordered pyrolytic graphite (HOPG) surface is not observed. Instead, within the diiodooctadecanoic acid SAM, each row of molecules is composed of opposite racemates. The two opposite racemates pack alternately inside a row, using different faces to adsorb on the surface. The unit cell is composed of a pair of opposite racemates, forming a heterochiral structure. For the iodination products of oleic acid, the racemic mixture is observed to exhibit quasi-phase separation during the formation of the 2-D crystal on the HOPG surface. Each row is composed of homochiral acid molecules, either the 9,10-(9R,10R)-diiodooctadecanoic acid (R) or the 9,10-(9S,10S)-diiodooctadecanoic acid (S). The R row and the S row pack alternately, with a unit cell composed of four molecules. Two of the molecules in the unit cell are the 9,10-(9R,10R)-diiodooctadecanoic acid (R) molecules; two are the 9,10-(9S,10S)-diiodooctadecanoic acid (S) molecules. In the unit cell, the two molecules that have the same chirality pack antiparallel inside the homochiral row, using different faces to adsorb on the surface. These results suggest that several different types of chiral assembly are possible. Enantiomers with opposite chirality exhibit many chiral assembly patterns, forming heterochiral structures on the surface in addition to separation to form macroscopic chiral domains. By using different conformations, similar enantiomers with opposite chirality will display many chiral assembly patterns to form heterochiral structures on the surface.     

Enantioselective crystallization of histidine on chiral self-assembled films of cysteine

In this paper, the preparation and use of chiral surfaces derived from enantiomerically pure crystals of amino acids are described. For this purpose, a self-assembly process to grow thin chiral films of (+)-L- or (-)-D-cysteine on gold surfaces was chosen. These chiral films were utilized as crystallization catalysts in the crystallization of enantiomers from solutions. To demonstrate the chiral discrimination power of the chiral surfaces in crystallization processes, the crystallization of racemic histidine onto the chiral films was investigated. Our study demonstrates the potential application of chiral films to control chirality throughout crystallization, where one enantiomer crystallizes onto the chiral surfaces with relative high enantiomeric excess. In addition, crystallization of pure histidine enantiomers onto chiral films results in strong crystal morphology modification with preferred orientation.     

Novel synthetic routes to several new, differentially substituted ruthenium tris(4,4 disubstituted-2,2-bipyridine) complexes

The stepwise synthesis of several novel Ru(tris(pp)) complexes (pp = 4,4'-disubstituted-2,2'-bipyridine; substituent = H, Me, chiral ester, or chiral amide) is described, where the pp ligands may be the same, or different, in each complex. All of the complexes detailed have been resolved into their pure delta- and lambda-enantiomers or diastereomers. The complexes, which are prepared starting from RuCl3, contain novel ligand architectures, with a range of chiral esters and amides attached to the 4,4'-positions of the bpy ligands. It was postulated that these chiral groups would be capable of inducing chirality at the metal center, but our investigations have shown this not to be the case, and in all reactions completely racemic products were formed. Resolution by chiral HPLC, and the subsequent characterization of the products through NMR, UV-vis, and circular dichroism (CD) spectroscopy, has been carried out; the characteristics of the CD spectra have been discussed with respect to the electron-donating/ withdrawing ability of the groups at the 4,4'-positions. The X-ray crystal structure of the optically pure complex lambda-[Ru(dmbpy)2(4,4'-bis((R)-(+)-alpha-phenylethylamido)-2,2'-bipyridine)] x 2PF6 x 2CHCl3 was obtained and solved using direct methods. This result, in conjunction with the CD spectra, enabled the complete and unambiguous assignment of the stereocenters of all of the novel Ru(tris(bpy)) complexes prepared in this investigation.     

Alternative cocrystallization of “almost” enantiomers and true enantiomers in some cis-β-organocobalt salen-type complexes with α-amino acids

The reaction of a chiral cis-β-organocobalt salen-type complex, 1, racemic mixture of Δ and Λ enantiomers, with enantiomerically pure l-histidine and a non-chiral monocationic cobalt complex, 3, resulted quite unexpectedly in the cocrystallization of diastereomers. Each diastereomer is a dicobalt monocationic complex, where four positions around one metal center are occupied by the tetradentate ligand in a cis fashion, the remaining two positions being occupied by l-histidinate. Histidinate further axially coordinates the other Co atom through the nitrogen of the imidazole residue. The two diastereomers are related by a quasi-symmetry center. In this case, the opposite helical chirality of the metal complex 1 prevails over the identical configuration of the asymmetric carbon in the crystallization process and the diastereomers behave as if they were enantiomers.The reaction of the same cobalt complexes 1 and 3 with dl-histidine led to the formation of two pairs of enantiomers, which crystallized separately as racemic compound. Therefore, in this case, the chirality of the asymmetric center is the property that allows the mutual selective recognition of the “true” enantiomers and drives their cocrystallization.     

Racemic atropisomeric N,N-chelate ligands for recognizing chiral carboxylates via Zn(II) coordination: structure, fluorescence, and circular dichroism

Two racemic atropisomeric N,N'-chelate ligands, bis{3,3'-[N-Ph-2-(2'-py)indolyl]} (1) and bis{3,3'-N-4-[N-2-(2'-py)indolyl]phenyl-2-(2'-py)indolyl} (2), have been found to be able to distinguish the enantiomers of Zn((R)-BrMeBu)2 and Zn((S)-BrMeBu)2 where BrMeBu = O2CCH(Br)CHMe2, with a distinct and intense CD spectral response at approximately the 10 microM concentration range. Computational studies established that the (R)-1-Zn((R)-BrMeBu)2 or (S)-1-Zn((S)-BrMeBu)2 diastereomer is more stable than (R)-1-Zn((S)-BrMeBu)2 or (S)-1-Zn((R)-BrMeBu)2. In addition, computational studies showed that the CD spectra of (S)-1-Zn((S)-BrMeBu)2 and (S)-1-Zn((R)-BrMeBu)2 are similar. (1)H NMR spectra confirmed that these two diastereomers exist in solution in about a 2:1 ratio for both complexes of 1 and 2. The distinct CD response of the racemic ligands 1 and 2 toward the chiral zinc(II) carboxylate is therefore attributed to the preferential formation of one diastereomer. The binding modes of the zinc(II) salt with ligands 1 and 2 were established by the crystal structures of the model compounds 1-Zn(tfa)2 and 2-Zn(tfa)2 (tfa = CF3CO2(-)), where the Zn(II) ion is chelated by the two central pyridyl groups in the ligand. Fluorescent titration experiments with various zinc(II) salts showed that the fluorescent spectrum of the atropisomeric ligand displays an anion-dependent change. The zinc(II) binding strength to the N,N'-chelate site of the atropisomeric ligand has been found to play a key role in the selective recognition of different chiral zinc(II) carboxylate derivatives by the racemic atropisomeric ligands.     

Disappearing Enantiomorphs: Single Handedness in Racemate Crystals

Although crystallization is the most important method for the separation of enantiomers of chiral molecules in the chemical industry, the chiral recognition involved in this process is poorly understood at the molecular level. We report on the initial steps in the formation of layered racemate crystals from a racemic mixture, as observed by STM at submolecular resolution. Grown on a copper single‐crystal surface, the chiral hydrocarbon heptahelicene formed chiral racemic lattice structures within the first layer. In the second layer, enantiomerically pure domains were observed, underneath which the first layer contained exclusively the other enantiomer. Hence, the system changed from a 2D racemate into a 3D racemate with enantiomerically pure layers after exceeding monolayer‐saturation coverage. A chiral bias in form of a small enantiomeric excess suppressed the crystallization of one double‐layer enantiomorph so that the pure minor enantiomer crystallized only in the second layer.     

Optically Active Tetra‐tert‐butyl‐P5‐deltacyclene Epimers: Preparation,Spectroscopy, Dynamic Equilibriums,H/D Exchange,and Transition‐Metal Complex Chemistry

On the basis of isolated diastereomeric triorganylstannyl‐P₅‐deltacyclenes 7′ and 7′′ , almost pure enantiomers of their destannylation products 8′ and 8′′ are now available. These stereochemically inert cage chiral species contain a configurationally labile P1?H1 group that defines two epimers 8 a and 8 b of each of the enantiomers, which are connected by a rapid equilibrium. Mirror‐symmetric circular dichroism (CD) spectra of the enantiomeric cages are compatible with the identification of epimers. A simulation of the CD spectrum of the major epimer 8′a relates the cage chirality of the system to the observed chiroptical effects. Both cage epimers and two of the phosphorus cage atoms are active as ligands with respect to [M(CO)₅] fragments of Cr, Mo, and W. Four almost isoenergetic regio‐ and stereoisomers of the resulting mononuclear complexes are formed for these metals, but only one of the isomers per metal crystallized in the case of the racemic series of the complexes. The enantiopure versions of cages and cage complexes, however, did not crystallize at all, a well‐known phenomenon for chiral compounds. CD spectra of the optically active complex isomer mixtures are close to identical with the CD spectra of the related free cages and point again to the chiral cages as the dominant source of the CD effects of the complexes. [(Benzene)RuCl₂] complexes of the cage ligand 8 behave totally differently. Only a single species 12 =[(benzene)RuCl₂ ?8 b ] is formed in almost quantitative yield and the minor epimer 8 b plays the role of the ligand exclusively. The reaction works as well for the separated enantiomeric cage versions to yield the highly enriched enantiomers 12′ and 12′′ separately. An efficient kinetic resolution process was identified as the main reason for this finding. It is based on a high stereo‐ and regiochemical flexibility of the P?C cage ligand that is capable of adjusting to the specific requirements of a suitable transition‐metal complex fragment. Such ligand flexibility is regularly observed in metalloenzymes, but is a very rare case in classical and organometallic complex chemistry.     

Highly cytotoxic vanadium(V) complexes of salan ligands; insights on the role of hydrolysis

Vanadium(V) oxo complexes with tetradentate diamine bis(phenolato) "salan" ligands of the type LVO(OiPr) (L is salan) with different steric and electronic substitutions at the ortho and para positions to the binding phenolato moiety were synthesized and their hydrolytic stability and cytotoxicity were analyzed. With one exception bearing large steric groups, all complexes examined displayed marked cytotoxic activity, comparable to, and often higher than, that of cisplatin. While the hydrolytic stability changed significantly depending on the substituent at the ortho position relative the O-donor with little effect of para substitutions, the cytotoxic activity largely was not affected, and high cytotoxicity was recorded also for relatively unstable complexes. Additional measurements revealed that the cytotoxicity is largely maintained following pre-incubation of up to 18 hours of the complexes in the biological medium prior to cell addition, suggesting that hydrolysis products might serve as the active species. In addition, appreciable cytotoxic activity was measured for an isolated hydrolysis product that was analyzed crystallographically to exhibit a dimeric structure with bridging oxo ligand where both metal centers are bound to the salan ligand, supporting the aforementioned conclusions.     

Chiral HPLC and physical characterisation of orthoconic antiferroelectric liquid crystals

New orthoconic antiferroelectric liquid crystalline materials were synthesised and characterised in their racemic forms and as (S) enantiomers. The materials possess oligo-methylene spacers of different lengths in semi-fluorinated achiral chains and lateral substitution by fluorine at two different positions of the molecular core. For comparison purposes, analogical materials without fluorine lateral substitutions were also prepared. Polysaccharide chiral stationary phases based on two different chiral selectors were used for the separation of the enantiomers of the individual racemic mixtures by high-performance liquid chromatography. A baseline separation of (S) and (R) enantiomers was obtained for four of the six studied liquid crystalline materials. Two of the materials were partially separated under the optimised separation conditions. The elution order of the individual enantiomers in the racemic mixtures was successfully assigned, as pure (S) enantiomers of all the studied materials were available. Both the position of the fluorine atom within the molecular core and the size of the achiral moiety had significant effects on the separation of the individual enantiomers of the studied compounds. Moreover, it was also found that the structure of the chiral stationary phase selector significantly influenced the enantiomeric resolution.     

Horeau's Coupling of Enantiomers Revisited. The Reversible Coupling of Enantiomers to Form Diastereoisomers in Kinetically Labile Metal Complexes

Pairs of enantiomeric molecules (??,??) of a substrate of unknown, but incomplete enantiomeric purity may be coupled to each other through labile coordination to a metal center M. This results in the formation of an equilibrium mixture of diastereoisomeric complexes, viz. meso-L_nM????(=m) and a pair of enantiomers L_nM???? and L_nM????(= e), where L is an achiral auxiliary ligand. General expressions are presented for determining the ratio of enantiomers [??]₀/[??]₀ from experimental parameters, which may be obtained from NMR measurements. Effects of diastereoselectivity are specifically considered. Limiting cases (nearly pure or nearly racemic substrates, very high or no diastereoselectivity, very large or no excess of free substrate) are discussed. The cases of additional diastereoisomerism owing to different coordination geometries and of the formation of complexes with more than two substrate molecules per metal center are also investigated. The results presented can not only be used for determining the enantiomeric excess but also for designing optimal strategies for the successive resolution of partly enriched samples.