Solid-Phase Extraction of Caffeine and Theophylline from Green Tea by a New Ionic Liquid-Modified Functional Polymer Sorbent

The new ionic liquid-modified polymer sorbent was developed by surface chemical modification of the synthesized polymer particles using ionic liquids. The obtained ionic liquid-modified polymer was successfully used as a special sorbent in a solid-phase extraction (SPE) process to isolate caffeine and theophylline from green tea. A comparison of different SPE cartridges using the blank polymer, C₁₈, and ionic liquid-modified polymer revealed that the highest recovery was obtained using ionic liquid-modified polymer sorbent. Quantitative analysis was carried out by using a C₁₈ column (5 µm, 150 × 4.6 mm) as an analytical column. Good linearity was obtained from 5 × 10^?4 to 0.5 mg/mL (r²>0.999) for the two analytes with relative standard deviations <4.5%.     

Purification of 4-hydroxybenzoic Acid and 4-hydroxybenzaldehyde from Laminaria japonica Aresch Using Commercial and Monolithic Sorbent in SPE Cartridge

Phenolic compounds are one of the major compounds in Laminaria japonica Aresch. Solid-phase extraction was used to separate the two phenolic compounds (4-hydroxybenzoic acid and 4-hydroxybenzaldehyde). A new monolithic sorbent was developed and used successfully as a special sorbent in a solid-phase extraction process. The effects on different SPE cartridges using silica, C₁₈, and monolithic were compared. Quantitative analysis was carried out using a C₁₈ analysis column (5 µm, 150 × 4.6 mm). Good linearity was obtained for the two targets, ranging from 0.5 to 100 µg mL^?1 (r ²  > 0.999), with relative standard deviations <4.7%.     

Solid‐phase extraction of matrine and oxymatrine from Sophora Flavescens Ait using amino‐imidazolium polymer

A new, polymer‐confined, ionic liquid sorbent was developed by a process involving polymerization and modification. The obtained particles were successfully used as a special sorbent in SPE process to isolate matrine and oxymatrine from Sophora Flavescens Ait. Different washing and elution solvents, such as ethanol, methanol, acetonitrile and methanol/triethylamine (90:10, v/v), were evaluated. Compared with the C₁₈ and NH₂ sorbents, the amino‐imidazolium polymer sorbent exhibited higher selectivity. Quantitative analysis was carried out by using a C₁₈ column. The two compounds exhibited good linearity from 5×10^?3 to 0.50 mg/mL (r²>0.99). The bound amounts between target compounds and proteins were obtained by this sorbent. After three recycles of amino‐imidazolium polymer, the extract amounts of the target compounds were not significantly decreased.     

Extraction and Determination of β-Sitosterol from Salicornia herbacea L. Using Monolithic Cartridge

A short ionic liquids-based monolithic cartridge was prepared and used as the selective extraction sorbent. Characteristic and evaluation are investigated by field emission scanning electron microscopy (FE-SEM), and a new approach was developed for the extraction and determination of β-sitosterol from Salicornia herbacea L. using the ionic liquids-based monolithic cartridge. Chromatographic analysis was conducted on a C₁₈ column with UV detection at 210 nm, and an eluting solution consisting of acetonitrile–water (60/40, v/v) was used as the mobile phase at a flow rate of 0.8 mL min^?1. The linearity was confirmed in the concentration range of 0.50–100.00 μg mL^?1, with RSDs within 4.20%, and a recovery of β-sitosterol ranging from 97.20 to 102.93%. This method effectively removed the impurities without any tedious pretreatment, and it provided a fast, economic and effective way to assay trace drugs from natural plants.     

Matrix Solid-Phase Dispersion Extraction and UPLC Determination of Sudan Dyes in Chili Powder

A new method involving matrix solid-phase dispersion (MSPD) extraction and UPLC in conjunction with photodiode array detection was developed for the rapid and simple determination of Sudan dyes in chili powder. Separation of Sudan I, Sudan II, Sudan III, and Sudan IV was achieved within 2 min on the 1.7 μm Acquity UPLC BEH C18 column by using gradient elution with a mobile phase consisting of acetonitrile–water at a flow rate of 0.5 mL min^?1. Optimization of MSPD extraction parameters, such as type of solid sorbent and elution solvent were carried out. Optimal conditions selected for MSPD extraction were 0.25 g of sample, 0.5 g of silica gel as solid sorbent, and 7 mL of acetonitrile–methanol (9:1, v/v) as eluting solvent. Limits of detection ranged between 0.25 and 0.30 mg kg^?1 depending on the dye involved. All analytes provided average recoveries from spiked (at 1, 1.5, and 2 mg kg^?1) chili powder samples ranging from 81 to 106%. The method was applied to the analysis of chili powder samples obtained from different countries.     

A novel ionic liquid-modified organic-polymer monolith as the sorbent for in-tube solid-phase microextraction of acidic food additives

A novel ionic liquid-modified organic-polymer monolithic capillary column was prepared and used for in-tube solid-phase microextraction (SPME) of acidic food additives. The primary amino group of 1-aminopropyl-3-methylimidazolium chloride was reacted with the epoxide group of glycidyl methacrylate. The as-prepared new monomer was then copolymerized in situ with acrylamide and N,N’-methylenebisacrylamide in the presence of polyethylene glycol (PEG)-8000 and PEG-10,000 as porogens. The extraction performance of the developed monolithic sorbent was evaluated for benzoic acid, 3-hydroxybenzoic acid, cinnamic acid, 2,4-dichlorophenoxyacetic acid, and 3-(trifluoromethyl)-cinnamic acid. Such a sorbent, bearing hydrophobic and anion-exchange groups, had high extraction efficiency towards the test compounds. The adsorption capacities for the analytes dissolved in water ranged from 0.18 to 1.74 μg cm^?1. Good linear calibration curves (R ²?>?0.99) were obtained, and the limits of detection (S/N?=?3) for the analytes were found to be in the range 1.2–13.5 ng mL^?1. The recoveries of five acidic food additives spiked in Coca-Cola beverage samples ranged from 85.4 % to 98.3 %, with RSD less than 6.9 %. The excellent applicability of the ionic liquid (IL)-modified monolithic column was further tested by the determination of benzoic acid content in Sprite samples, further illustrating its good potential for analyzing food additives in complex samples.

Removal of Th4+ ions from aqueous solutions by graphene oxide

The removal of Th⁴⁺ ions from aqueous solutions was investigated using single-layer graphene oxide (GO) as a sorbent which was prepared by the modified Hummers’ method through batch adsorption experiments at room temperature. Structural characterizations of the sorbent were also investigated. The influences of the pH value of solution, contact time, sorbent dose, ionic strength, the initial metal ion concentration and temperature on the adsorption of Th⁴⁺ were also investigated. These results indicated that the adsorption of Th⁴⁺ was dependent on the pH and independent on the ionic strength. The sorbent provided significant Th⁴⁺ removal (>98.7 %) at pH 3.0 and the adsorption equilibrium was achieved after only 10 min. The Langmuir adsorption isotherm fit the absorption profile very closely, and indicated that a maximum adsorption capacity of 1.77 mmol g^?1 of GO (411 mg g^?1) after 2 h. The thermodynamic parameters showed that this adsorption process was endothermic and spontaneous. Moreover, the desorption level of Th⁴⁺ from GO, by using 0.1 mol L^?1 H₂SO₄ as a stripping agent, was 84.2 ± 1.2 %, and that of 0.5 mol L^?1 HNO₃ as a stripping agent, was 79.8 ± 3.0 %.     

Determination of Phenylureas Herbicides in Foodstuffs Based on Matrix Solid-Phase Dispersion Extraction and RP-LC with UV Detection

A new method for simultaneous determination of seven kinds of phenylurea herbicides (PUHs) in solid foodstuffs was established based on matrix solid phase dispersion (MSPD)–RP-LC. The procedure of MSPD is simple and not time-consuming. C₁₈-bonded silica and anhydrous alumina were, respectively, used as dispersion sorbent and purificant, and dichloromethane as extraction reagent. Under the optimum conditions, seven kinds of herbicides were separated completely within 30 min, response was a linear function of concentration over the range 2.5–500 μg L^?1 with good correlation coefficients (>0.99) and lower detection limits (0.25 and 0.5 μg L^?1). Intra-day and inter-day precision of the peak areas for seven PUHs were less than 3.7 and 5.3%. The new method was used to detect seven PUHs in four kinds of solid foodstuffs with average recoveries range from 73.1 to 101%.     

Ionic liquid-modified silica-coated magnetic nanoparticles; promising anion-exchange sorbent for extraction of Cr(VI)

In the present study, ionic liquid-modified silica-coated magnetic nanoparticles (MNPs) were synthesised and applied as a new anion-exchange sorbent for extraction and determination of Cr(VI) followed by inductively coupled plasma atomic emission spectrometry. The characterisation of MNPs was carried out by scanning electron microscope, Fourier transform infrared and vibrating sample magnetometer. Experimental design and response surface methodology were used for optimisation of different parameters which affect extraction efficiency of Cr(VI). Under the optimised conditions, extraction recoveries within the range of 25–33% with relative standard deviations (RSD%, n = 4) within the range of 3.0–5.0% were obtained. The limit of detection was found to be 0.1 µg L^?1. The linearity was studied in the range of 0.5-200 µg L^?1 with the determination coefficient of 0.9958. Also, calculated Errors% for determination of Cr(VI) in the range of 5-15 depict that the method offers acceptable accuracy for analysis of Cr(VI). The method was successfully applied for extraction and determination of Cr(VI) selectively in some tannery waste water samples.     

Molecular imprinting in ionic liquid-modified porous polymer for recognitive separation of three tanshinones from Salvia miltiorrhiza Bunge

Five ionic liquid-modified porous polymers with different imidazolium-based functional groups were obtained. A molecular imprinting technique was introduced to form the ordered functional groups in the porous structure. The adsorption isotherm was applied to investigate the interactions between the polymers and target compounds: cryptotanshinone; tanshinone I; tanshinone IIA. Thorough comparison revealed that the polymer with a carboxyl group possessed the highest reorganization of the three compounds. After that, the obtained polymer was applied as the sorbent in the solid-phase extraction process to separate the target compounds from methanol extract. The loading volume of extract solution on the sorbent was determined by adsorption isotherm equation and practical test. Under optimized washing and elution conditions, 0.35 mg/g of cryptotanshinone, 0.33 mg/g of tanshinone I, and 0.27 mg/g of tanshinone IIA from plant were obtained by quantitative HPLC analysis. Moreover, six commercial functional drinks containing tanshinones were purified and analyzed.     

High-resolution monolithic columns—a new tool for effective and quick separation

This work describes a comparison of three types of commercial high-performance liquid chromatography silica monolithic columns with different inner diameters and generations of monolithic sorbent: a “classic” monolithic column, the first generation (Onyx? monolithic C₁₈, 100 mm?×?4.6 mm, Phenomenex); a “narrow” monolithic column for fast separation at lower flow rates (Chromolith® Performance RP-18e, 100 mm?×?3 mm, Merck); and a recently introduced “high-resolution” monolithic column, the next generation (Chromolith® HighResolution RP-18e, 100 mm?×?4.6 mm, Merck). Separation efficiency (number of theoretical plates, height equivalent to a theoretical plate and van Deemter curves), working pressure, the symmetry factor and resolution were critical aspects of the comparison in the case of the separation of ascorbic acid, paracetamol and caffeine. The separations were performed under isocratic conditions with a mobile phase consisting of 10:90 (v/v) acetonitrile–phosphoric acid (pH 2.80). Detailed comparison of the newest-generation monolithic column (Chromolith® HighResolution) with the previously introduced monolithic sorbents was performed and proved the advantages of the Chromolith® HighResolution column.

Liquid–Liquid Equilibria for Extraction of Citrus Essential Oil Using Ionic Liquids

The object of this study was to measure the liquid–liquid equilibria (LLE) data of binary mixtures containing ionic liquids and citrus essential oil. We investigated linalool as the citrus essential oil, and 1-alkyl-3-methyl-imidazolium bis(trifluoromethanesulfonyl)imide ([C _n MIM]⁺[TFSI]^?) as the ionic liquid. Firstly, the experimental apparatus and procedure for the LLE measurement of mixtures containing ionic liquids were verified by measuring the LLE of the binary mixture 1-hexyl-3-methyl-imidazolium bis(trifluoromethanesulfonyl)imide ([C₆MIM]⁺[TFSI]^?) + 1-hexanol as a reference test system recommended by Marsh et al. (Pure Appl Chem 81:781–789, 2009). Next, the LLE data for IL + linalool were obtained, and the LLE data of two binary mixtures 1-butyl-3-methyl-imidazolium bis(trifluoromethanesulfonyl)imide ([C₄MIM]⁺[TFSI]^?) or [C₆MIM]⁺[TFSI]^? + linalool were determined. The experimental LLE data were satisfactorily represented by the non-random two-liquid model.     

Selective solid-phase extraction of lead(II) from biological and natural water samples using surface-grafted lead(II)-imprinted polymers

A new Pb(II)-imprinted amino-functionalized silica gel sorbent was synthesized by an easy one-step reaction by combining a surface imprinting technique for selective solid-phase extraction of trace Pb(II) prior to its determination by inductively coupled plasma optical emission spectrometry. The Pb(II)-imprinted amino-functionalized silica gel sorbent was characterized by Fourier transform infrared spectroscopy. Compared to non-imprinted polymer particles, the ion-imprinted polymers had higher selectivity and adsorption capacity for Pb(II). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Pb(II) was 19.66 and 6.20 mg g^?1, respectively. The largest selectivity coefficient of the Pb(II)-imprinted sorbent for Pb(II) in the presence of Cd(II) was over 450. The relative selectivity (α _r) values of Pb(II)/Cd(II) were 49.3 and 46.3, which were greater than 1. The distribution ratio (D) values of Pb(II)-imprinted polymers for Pb(II) were much larger than that for Cd(II). The detection limit (3σ) was 0.20 μg L^?1. The relative standard deviation was 2.0% for 11 replicate determinations. The method was validated for the analysis three certified reference materials (GBW 08301, GBW 08504, GBW 08511), and the results are in good agreement with standard values. The method was also successfully applied to the determination of trace lead in plants and water samples with satisfactory results.     

Preparation of sol–gel materials doped with ionic liquid and extractant for cerium(III) extraction

Silica materials (ILDEHPASGs) consisting of ionic liquids and di-(2-ethylhexyl)phosphoric acid (DEHPA) for Ce(III) extraction was prepared by a sol–gel method using the hydrophobic ionic liquid 1-octyl-3-methylimidazolium hexafluorophosphate ([C₈mim]PF₆) as porogen and solvent medium. The ILDEHPASGs were characterized by scanning electron microscopy, Brunauer–Emmett–Teller surface area, Fourier transform infrared, and thermogravimetric analyses. The results indicated the doping of DEHPA and [C₈mim]PF₆ in ILDEHPASG-3 would evidently affect the formation of porous structure of sol–gel materials. ILDEHPASG-3 also possessed more channels and macropores than the blank sorbent; the surface area and pore volume of ILDEHPASG-3 were 409 m² g^?1 and 0.444 cm³ g^?1, respectively. [C₈mim]PF₆ and DEHPA were only physically confined or entrapped in the growing covalent silica network rather than chemically bound to the inorganic matrix. The majority of [C₈mim]PF₆ and DEHPA were stably immobilized in the gel. Then, the effects of contact time and pH were determined. The results showed the sorption of Ce(III) strongly depended on the contact time and pH, and ILDEHPASGs had high sorption ability for Ce(III). The results were analyzed by both Langmuir and Freundlich adsorption isotherm models, and the latter was found to give a better fit.     

Cetyltrimethylammonium-coated magnetic nanoparticles for the extraction of bromate,followed by its spectrophotometric determination

We report on a combination of magnetic solid-phase extraction and spectrophotometric determination of bromate. Cetyltrimethylammonium ion was adsorbed on the surface of phenyl-functionalized silica-coated Fe₃O₄ nanoparticles (Ph-SiO₂@Fe₃O₄), and these materials served as the sorbent. The effects of surfactant and amount of sorbent, the composition of the desorption solution, the extraction time and temperature were optimized. Under optimized conditions, an enrichment factor of 12 was achieved, and the relative standard deviation is 2.9 % (for n?=?5). The calibration plot covers the 1–50 ng mL^?1 range with reasonable linearity (r ²?>?0.998); and the limit of detection is 0.5 ng mL^?1. The method is not interfered by ionic compounds commonly found in environmental water samples. It was successfully applied to the determination of bromate in spiked water samples.

A green strategy for lithium isotopes separation by using mesoporous silica materials doped with ionic liquids and benzo-15-crown-5

Three new mesoporous silica materials IL15SGs (HF15SG, TF15SG and DF15SG) doped with benzo-15-crown-5 and imidazolium based ionic liquids (C₈mim⁺PF₆ ^?, C₈mim⁺BF₄ ^? or C₈mim⁺NTf ₂ ^? ) have been prepared by a simple approach to separating lithium isotopes. The formed mesoporous structures of silica gels have been confirmed by transmission electron microscopy image and N₂ gas adsorption–desorption isotherm. Imidazolium ionic liquids acted as templates to prepare mesoporous materials, additives to stabilize extractant within silica gel, and synergetic agents to separate the lithium isotopes. Factors such as lithium salt concentration, initial pH, counter anion of lithium salt, extraction time, and temperature on the lithium isotopes separation were examined. Under optimized conditions, the extraction efficiency of HF15SG, TF15SG and DF15SG were found to be 11.43, 10.59 and 13.07 %, respectively. The heavier isotope ⁷Li was concentrated in the solution phase while the lighter isotope ⁶Li was enriched in the gel phase. The solid–liquid extraction maximum single-stage isotopes separation factor of ⁶Li–⁷Li in the solid–liquid extraction was up to 1.046 ± 0.002. X-ray crystal structure analysis indicated that the lithium salt was extracted into the solid phase with crown ether forming [(Li_0.5)₂(B15)₂(H₂O)]⁺ complexes. IL15SGs were also easily regenerated by stripping with 20 mmol L^?1 HCl and reused in the consecutive removal of lithium ion in five cycles.     

MultiSimplex optimization of the dispersive solid-phase microextraction and determination of fenitrothion by magnetic molecularly imprinted polymer and high-performance liquid chromatography

A magnetic molecularly imprinted polymer (MMIP) was fabricated and used as the sorbent for the MMIP-dispersive solid-phase microextraction of fenitrothion prior its determination by high-performance liquid chromatography equipped with an ultraviolet detector. The MMIP was prepared using functionalized Fe₃O₄ nanoparticles as the magnetic supporter. Methacrylic acid, ethylene glycol dimethacrylate and fenitrothion were used as the functional monomer, the cross-linker and the template, respectively. The properties of the resultant MMIP were evaluated using X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorbent exhibited high selectivity and affinity toward fenitrothion compared to other organophosphate pesticides with the maximum adsorption capacity of 31.5 mg g^?1. The effective variables on the extraction were optimized by univariable and MultiSimplex methods. The calibration curve exhibited linearity over the concentration range of 0.3–50.0 μg L^?1 with the limit of detection of 0.1 μg L^?1. The relative standard deviations at 10.0 μg L^?1 level of FNT (n = 5) for intra- and inter-day assays were 1.6 and 3.1%, respectively. The proposed method was successfully used for the determination of trace amounts of FNT in food and water samples.     

Determination of Tiopronin in Human Plasma and Pharmacokinetics by LC-ESI-MS

A rapid, sensitive and specific method based on high performance liquid chromatography-electrospray ionization-mass spectrometry was developed for the determination of tiopronin in human plasma. In this study, vitamin C and dithiothreitol were used as the reducer and to release and stabilize tiopronin from dimeric mixed forms with endogenous thiols encountered during pretreatment of plasma samples. The separation was successfully achieved on an Agilent SB-Aq column packed with 5 μm C₁₈ silica, using an aqueous formic acid solution (pH 4.5–4.7), 0.5 mM tris(hydroxymethyl)aminomethane and methanol (95:5, v/v) as the mobile phase. Mass spectra were acquired in selective ion monitoring mode, using the [M ? H] ^? ions of tiopronin at m/z 162.0 and the [M ? H]^? of the internal standard sodium cyclamate at m/z 178.0, respectively. This quantitative assay was fully validated with respect to precision, repeatability and accuracy. The correlation coefficients were >0.9995 in the range 0.025–8.15 μg mL^?1 in human plasma. The mean recoveries were above 85%. The limit of quantitation was 0.012 μg mL^?1 with a relative standard deviation of inter-day and intra-day accuracy of less than 15%. This LC-ESI-MS method was also successfully applied to a pharmacokinetic study after oral administration of formulated tiopronin to healthy volunteers. The elimination half-life (T _1/2) was 21.5 ± 11.1 h.     

Use of ionic liquid based chitosan as sorbent for preconcentration of fluoroquinolones in milk,egg, fish,bovine, and chicken meat samples by solid phase extraction prior to HPLC determination

The possibility of using ionic liquid based chitosan sorbent for the separation and preconcentration of fluoroquinolone antibiotics (marbofloxacin, enoxacin, ofloxacin, ciprofloxacin, and enrofloxacin) has been studied. For this reason, different ionic liquids were prepared and coated on the chitosan sorbent. The conditions of the preconcentration of fluoroquinolones on a microcolumn have been optimized and the extraction efficiencies of the prepared sorbents have been compared. The compounds were eluted with 5 mL of 20% NH₃ (v/v, MeOH) solution and determined by HPLC with diode array and fluorescence detector. The limits of detection were found as 4.23 µ g L^?1 for marbofloxacin, and 1.09 µg L^?1 for enoxacin; 3.23 × 10^?3 µg L^?1 for ofloxacin; 8.39 × 10^?3 µg L^?1 for ciprofloxacin; and 19.50 × 10^?3 µg L^?1 for enrofloxacin. The developed method was applied for the analysis of fluoroquinolone in milk, egg, fish, bovine, and chicken samples and the recoveries were obtained in the range 70–100%.     

Immobilization of calix[6]arene bearing carboxylic acid and amide groups on aminopropyl silica gel and its sorption properties for Cr(VI)

An aminopropyl silica gel-immobilized calix[6]arene (C[6]APS) containing both amide and acid moieties was prepared from p-tert-butylcalix[6]arene hexacarboxylate derivative and aminopropyl silica gel in the presence of N,N′-diisopropyl carbodiimide coupling reagent. C[6]APS was used to evaluate the sorption properties of Cr(VI) as a sorbent material. In sorption studies, it was observed that C[6]APS was highly effective at pH 1.5 for Cr(VI). The effect of parameters such as pH, sorbent dosage, contact time, initial Cr(VI) concentration and temperature on Cr(VI) sorption; the sorption isotherms were also studied. Maximum sorption capacity was obtained as 3.1 mg g^?1 at pH 1.5 and 25 °C for 1 h and 10.4 mg L^?1 initial Cr(VI) concentration. Thermodynamic parameters such as change in free energy, enthalpy, and entropy were also determined. In the isotherm studies, Langmuir and Freundlich isotherm models were applied and it was found that the experimental data confirmed to Freundlich isotherm model, and the batch sorption capacity of C[6]APS was calculated as 37.66 mg g^?1.