Bimetallic palladium–gold nanoparticles synthesized in ionic liquid microemulsion

The palladium and gold precursors were dissolved in dispersive and continuous phase of ionic liquid microemulsion (H₂O/Triton X-100 (TX-100)/1-butyl-3-methylimidazolium hexafluorophosphate), respectively. [PdCl₆]^2? ions were reduced in situ by TX-100 in dispersive phase (H₂O) to prepare Pd nanoparticles (NPs) and then [AuCl₄]^? crossed through the interface film and reacted with the as-prepared Pd NPs to form Pd₄Au NPs. The as-prepared Pd₄Au NPs were characterized by transmission electronic microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and ultraviolet–visible spectroscopy. The as-prepared Pd₄Au NPs suspension and carbon nanotubes (CNTs) suspension were vigorously stirred to prepare the electrocatalyst supported on the CNTs with a total metal loading of 20?wt.% (denoted by Pd₄Au/CNTs). Cyclic voltammetry and chronoamperometry tests show that the Pd₄Au/CNTs are very promising for the oxidation of ethanol in alkaline medium. The result can be attributed to the synergistic effect between Pd and Au during the catalytic process.     

Synthesis of open-mouthed,yolk–shell Au@AgPd nanoparticles with access to interior surfaces for enhanced electrocatalysis

We have successfully produced open-mouthed, yolk–shell (OM-YS) Au@AgPd nanoparticles (NPs) via galvanic replacement reaction at room temperature; each NP has a large opening on its AgPd shells. Owing to the openings on the AgPd shells, the inner surfaces of the AgPd shells of as-prepared OM-YS Au@AgPd NPs become accessible to the surrounding media. These new structural characters make the present OM-YS Au@AgPd NPs excellent catalysts for electrochemical oxidation of ethanol in alkaline media. Their electrochemical active surface area is 87.8 m² g^–1 and the mass activity is 1.25 A mg_Pd^–1. Moreover, the openings on the AgPd shells also make the surfaces of the Au cores in OM-YS Au@AgPd NPs accessible to the reaction media, which significantly facilitates the removal of CO and other carbonaceous intermediate species, thus leading to substantially enhanced durability and stability. This superior electrocatalytic performance cannot be implemented by using conventional YS Au@AgPd NPs or commercially available Pd/C catalysts.     

Linen fiber template-assisted preparation of TiO2 nanotubes: palladium nanoparticle coating and electrochemical applications

TiO₂ nanotubes were fabricated from TiF₄ precursors within the pore channels of the linen fiber templates, resulting in crystalline fabricated titanate nanotubes (f-TNTs) upon removal by calcination at 500–600 °C. The f-TNTs were formed by the aggregation of TiO₂ nanoparticles (NPs) with a diameter of 80 nm; the wall thickness and size of the f-TNTs can be controlled by adjusting the concentration of the TiF₄ precursor, time, temperature, and the size of the linen fibers respectively. After that, palladium (Pd⁽⁰⁾) NPs were coated on the surface of the f-TNTs (Pd/f-TNTs) by the chemical reduction method, using NaBH₄ as a reducing agent. The size of the Pd⁽⁰⁾ NPs is about 10–13 nm. The Pd/f-TNT nanocomposite is systematically characterized by X-ray diffraction, high-resolution transmission electron microscopy, and field emission scanning electron microscopy. The Pd/f-TNT nanocomposite-modified glassy carbon electrodes exhibited excellent electrocatalytic activity as well as amperometric determination of hydrazine, ascorbic acid, and dopamine; these electrochemical applications were carried out by cyclic voltammetry.     

Highly Selective Pd–Cu/α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts for Liquid-Phase Hydrogenation: The Influence of the Pd: Cu Ratio on the Structure and Catalytic Characteristics

The structure and catalytic characteristics of a series of Pd–Cu/α-Al₂O₃ catalysts with Pd: Cu ratio varied from Pd₁–Cu_0.5 to Pd₁–Cu₄ were studied. The use of α-Al₂O₃ with a small surface area (S_sp = 8 m²/g) as a support made it possible to minimize the effect of diffusion on the catalytic characteristics and to study the structure of Pd–Cu nanoparticles by X-ray diffraction (XRD) analysis. The XRD analysis and transmission electron microscopy (TEM) data indicated the formation of uniform bimetallic Pd–Cu nanoparticles (d = 20–60 nm), whose composition corresponded to a ratio between the metals in the catalyst, and also the absence of monometallic Pd⁰ and Cu⁰ nanoparticles. The study of catalytic properties in the liquid-phase hydrogenation of diphenylacetylene (DPA) showed that the activity of the catalysts rapidly decreased with the Cu content increase; however, in this case, the yield of a desired alkene compound significantly increased. The selectivity of alkene formation on the catalysts with the ratios Pd: Cu = 1: 3 and 1: 4 was superior to the commercial Lindlar catalyst.     

High‐Loading Nano‐SnO2 Encapsulated in situ in Three‐Dimensional Rigid Porous Carbon for Superior Lithium‐Ion Batteries

Tin oxide nanoparticles (SnO₂ NPs) have been encapsulated in situ in a three‐dimensional ordered space structure. Within this composite, ordered mesoporous carbon (OMC) acts as a carbon framework showing a desirable ordered mesoporous structure with an average pore size (≈6 nm) and a high surface area (470.3 m² g^?1), and the SnO₂ NPs (≈10 nm) are highly loaded (up to 80 wt %) and homogeneously distributed within the OMC matrix. As an anode material for lithium‐ion batteries, a SnO₂@OMC composite material can deliver an initial charge capacity of 943 mAh g^?1 and retain 68.9 % of the initial capacity after 50 cycles at a current density of 50 mA g^?1, even exhibit a capacity of 503 mA h g^?1 after 100 cycles at 160 mA g^?1. In situ encapsulation of the SnO₂ NPs within an OMC framework contributes to a higher capacity and a better cycling stability and rate capability in comparison with bare OMC and OMC ex situ loaded with SnO₂ particles (SnO₂/OMC). The significantly improved electrochemical performance of the SnO₂@OMC composite can be attributed to the multifunctional OMC matrix, which can facilitate electrolyte infiltration, accelerate charge transfer, and lithium‐ion diffusion, and act as a favorable buffer to release reaction strains for lithiation/delithiation of the SnO₂ NPs.     

Steam pre-reforming of natural gas over nanostructured Ni/12CaO–7Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst for hydrogen production: effect of support preparation method

Calcium aluminate (12CaO–7Al₂O₃) powder was synthesized using three methods, viz. Pechini, coprecipitation, and a new novel facile decomposition route starting from activated alumina and calcium nitrate precursors, then used as a support to prepare a series of 31 wt%Ni/12CaO–7Al₂O₃ catalysts by deposition–precipitation method. The resultant catalysts were tested in steam pre-reforming of natural gas at 400–550 °C, low steam-to-carbon (S/C) molar ratio of 1.5, and atmospheric pressure. The obtained samples were characterized by Brunauer–Emmett–Teller (BET) analysis, scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, temperature-programmed reduction (TPR), temperature-programmed oxidation (TPO), hydrogen chemisorption, and CO₂–temperature-programmed desorption (TPD). Experimental results showed that the basicity and morphology of the supports depended significantly on the synthesis method. Calcium aluminate synthesized using the new decomposition procedure showed surface area of 6.23 m² g^?1, while the surface area of those prepared by the Pechini and coprecipitation method were 1.38 and 3.76 m² g^?1, respectively. The catalytic properties of the 31 wt%Ni/12CaO–7Al₂O₃ catalysts were strongly influenced by the support preparation approach. The highest specific surface area (about 230 m² g^?1), smallest Ni particle size (8.86 nm), and highest nickel dispersion (7.48%) were observed for the catalyst whose support was synthesized by the decomposition method. Even at high gas hourly space velocity (GHSV) of 2 × 10⁵ mL \({\text{g}}^{ - 1}_{\text{catalyst}}\) h^?1, this catalyst exhibited around 100% C₂H₆ and C₃H₈ conversion at temperature above 500 °C. High catalytic stability during 60 h time on-stream was also shown. The TPO profiles of the spent catalyst demonstrated high resistance to carbon formation.     

Synthesis of monoclinic WO3 nanosphere hydrogen gasochromic film via a sol–gel approach using PS-b-PAA diblock copolymer as template

A monoclinic tungsten trioxide (WO₃) nanosphere film was synthesized via a sol–gel approach using an amphiphilic diblock copolymer polystyrene-b-polyacrylic acid (PS-b-PAA) as template in toluene. The morphology, surface area and crystal structure of as-synthesized WO₃ were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), BET (N₂) and powder X-ray diffraction (XRD). The XRD pattern of WO₃ nanosphere film can be identified as a pure monoclinic WO₃ phase. The WO₃ precursor nanospheres had diameters ranging from 20 to 150 nm and surface area of 78.8 m² g^?1. The hydrogen gasochromic experiments revealed that such WO₃ nanosphere film with high surface area had a rapid response (5 ～ 10 s) to pure hydrogen at room temperature.     

Synthesis of Ni–Ru Alloy Nanoparticles and Their High Catalytic Activity in Dehydrogenation of Ammonia Borane

We report the synthesis and characterization of new Ni_xRu_1?x (x=0.56–0.74) alloy nanoparticles (NPs) and their catalytic activity for hydrogen release in the ammonia borane hydrolysis process. The alloy NPs were obtained by wet‐chemistry method using a rapid lithium triethylborohydride reduction of Ni²⁺ and Ru³⁺ precursors in oleylamine. The nature of each alloy sample was fully characterized by TEM, XRD, energy dispersive X‐ray spectroscopy (EDX), and X‐ray photoelectron spectroscopy (XPS). We found that the as‐prepared Ni–Ru alloy NPs exhibited exceptional catalytic activity for the ammonia borane hydrolysis reaction for hydrogen release. All Ni–Ru alloy NPs, and in particular the Ni_0.74Ru_0.26 sample, outperform the activity of similar size monometallic Ni and Ru NPs, and even of Ni@Ru core‐shell NPs. The hydrolysis activation energy for the Ni_0.74Ru_0.26 alloy catalyst was measured to be approximately 37 kJ mol^?1. This value is considerably lower than the values measured for monometallic Ni (≈70 kJ mol^?1) and Ru NPs (≈49 kJ mol^?1), and for Ni@Ru (≈44 kJ mol^?1), and is also lower than the values of most noble‐metal‐containing bimetallic NPs reported in the literature. Thus, a remarkable improvement of catalytic activity of Ru in the dehydrogenation of ammonia borane was obtained by alloying Ru with a Ni, which is a relatively cheap metal.     

Pure CuCr2O4 nanoparticles: Synthesis,characterization and their morphological and size effects on the catalytic thermal decomposition of ammonium perchlorate

In the present paper a pure phase of the copper chromite spinel nanoparticles (CuCr₂O₄ SNPs) were synthesized via the sol–gel route using citric acid as a complexing agent. Then, the CuCr₂O₄ SNPs has been characterized by field emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). In the next step, with the addition of Cu–Cr–O nanoparticles (NPs), the effects of different parameters such as Cu–Cr–O particle size and the Cu/Cr molar ratios on the thermal behavior of Cu–Cr–O NPs + AP (ammonium perchlorate) mixtures were investigated. As such, the catalytic effect of the Cu–Cr–O NPs for thermal decomposition of AP was evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). TGA/DSC results showed that the samples with different morphologies exhibited different catalytic activity in different stages of thermal decomposition of AP. Also, in the presence of Cu–Cr–O nanocatalysts, all of the exothermic peaks of AP shifted to a lower temperature, indicating the thermal decomposition of AP was enhanced. Moreover, the heat released (ΔH) in the presence of Cu–Cr–O nanocatalysts was increased to 1490 J g⁻¹.     

Synthesis of binuclear complexes of PdCl2 with chiral α,α′-diamino-meta-xylene dioximes H2L1, H2L2, and H2L3, the derivatives of the terpenes (+)-3-carene, (R)-(+)-limonene, and (S)-(−)-α-pinene. Crystal structure of [Pd2(H2L1)Cl4]

Chiral α,α′-diamino-meta-xylene dioximes H₂L¹, H₂L², and H₂L³ were obtained from the naturally occurring terpenoids (+)-3-carene, (R)-(+)-limonene, and (S)-(?)-α-pinene, respectively. Reactions of these ligands with PdCl₂ gave the diamagnetic complexes Pd₂(H₂L¹)Cl₄ (I), Pd₂(H₂L²)Cl₄ (II), and Pd₂(H₂L³)Cl₄ (III). According to X-ray diffraction data, the crystal structure of complex I consists of acentric binuclear molecules [Pd₂(H₂L¹)Cl₄]. The coordination polyhedron PdN₂Cl₂ is a square distorted in a tetrahedral manner (trapezium) made up of two N atoms of the tetradentate bridging cyclic ligand H₂L¹ and two Cl atoms. The fragments PdCl₂ in the complex are cis to each other. According to the ¹H NMR spectra of complexes I–III in CDCl₃, the organic ligands are coordinated through the N atoms; in solution, the complexes exist in several forms.     

<Emphasis Type="Italic">Tetra</Emphasis>-armed conjugated microporous polymers for gas adsorption and photocatalytic hydrogen evolution

Two novel tetra-armed conjugated microporous polymers with different geometries have been designed and synthesized via Suzuki-Miyaura cross coupling polycondensation. Both polymers are stable in various organic solvents tested and are thermally stable. The pyrene-containing polymer of PrPy with the rigid pyrene unit shows a higher Brunauer-Emmet-Teller specific surface area of 1219 m² g^?1 than the tetraphenylethylene-containing polymer of PrTPE (770 m² g^?1), which leads to a high CO₂ uptake ability of 3.89 mmol g^?1 at 1.13 bar/273 K and a H₂ uptake ability of 1.69 wt% at 1.13 bar/77 K. The photocatalytic hydrogen production experiments revealed that PrPy also shows a better photocatalytic performance than PrTPE due to the higher conjugation degree and planar structure, the broader UV-visible (UV-Vis) absorption, the lower photoluminescence lifetime, and the higher specific surface area.     

Structural and thermal properties of chemically synthesized Bi2Te3 nanoparticles

Bi₂Te₃ nanoparticles (NPs) have been synthesized at 50?°C by a low-cost wet chemical route. The structural properties of product sample were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy. Thermal properties of product sample were investigated by differential scanning calorimetry (DSC), thermogravimetric (TG), and transient plane source techniques. The XRD and selected area electron diffraction of Bi₂Te₃ NPs result showed the polycrystalline nature with a rhombohedral (R3m) structure of the nanocrystallites. The average grain size of Bi₂Te₃ NPs was found to be about 30?nm by XRD and TEM measurements. DSC result shows one endothermic peak and one exothermic peak. TG result shows that only 48?% mass loss has occurred in Bi₂Te₃ sample. The obtained lower thermal conductivity of Bi₂Te₃ NPs is about 0.3?W m^?1 K^?1 at room temperature, which is caused by considering the crystalline nature of this material.     

Nickel-catalyzed synthesis of nanoporous organic frameworks and their potential use in gas storage applications

The synthesis of highly nanoporous organic frameworks (NPOFs) has been established using nickel(0)-catalyzed Yamamoto coupling reactions, which has afforded highly porous polymers featuring remarkable chemical and thermal stability. Treatment of 1,3,5-tris(4-bromophenyl)benzene, 1,2,4,5-tetrakis(4-bromophenyl)benzene, or 1,3,5,7-tetrakis(4-iodophenyl)adamantane with Ni(cod)₂ in DMF at 80°C for 48 h afforded the nanoporous organic frameworks, NPOF-1, NPOF-2, and NPOF-3, respectively, as white powders in quantitative yields. All NPOFs are insoluble in common organic solvents such as dimethylformamide, tetrahydrofuran, toluene, dichloromethane, and methanol. The chemical composition and structural aspects of NPOFs were investigated by spectral and analytical methods while porosity was examined by nitrogen porosity measurements. In spite of their amorphous nature, NPOFs exhibit permanent porosity and high Langmuir surface areas (NPOF-1: 2,635 m² g^?1; NPOF-2: 4,227 m² g^?1; NPOF-3: 2,423 m² g^?1), which make them attractive for subsequent use in gas storage and separation applications, among others. The performance of NPOFs in hydrogen storage was evaluated at 1 bar and 77 K and revealed that these highly porous architectures can store up to 1.45 wt% of hydrogen.     

Structural diversity and solid-state properties of CoII and ZnII coordination complexes with 5-aminonicotinate through metal direction

Zinc and cobalt 5-aminonicotinate (5-AN^–) complexes, Co(5-AN)₂(H₂O)₄ (1) and {[Zn(5-AN)₂](H₂O)}_n (2), have been hydrothermally synthesized and structurally characterized. Single-crystal X-ray diffraction results indicate that coordination geometries are different (octahedral for Co^II and tetrahedral for Zn^II) and 5-AN^? adopts distinct binding modes (terminal in 1 and bridging in 2), forming a simple mononuclear coordination motif for 1 and a 2-D (4,4) coordination layer for 2. The higher-dimensional supramolecular architectures for both complexes are constructed via hydrogen bonding. Both complexes have been characterized by IR, microanalysis, and powder X-ray diffraction techniques and, their thermal stability and fluorescence have also been investigated.     

Colloidal Template Synthesis of Nanomaterials by Using Microporous Organic Nanoparticles: The Case of C@MoS2 Nanoadsorbents

The so‐called colloidal template synthesis has been applied to the preparation of surface‐engineered nanoadsorbents. Colloidal microporous organic network nanotemplates (C‐MONs), which showed a high surface area (611 m² g^?1) and enhanced microporosity, were prepared through the networking of organic building blocks in the presence of poly(vinylpyrrolidone) (PVP). Owing to entrapment of the PVP in networks, the C‐MONs showed good colloidal dispersion in EtOH. MoS₂ precursors were incorporated into the C‐MONs and heat treatment afforded core–shell‐type C@MoS₂ nanoparticles with a diameter of 80 nm, a negative zeta potential (?39.5 mV), a high surface area (508 m² g^?1), and excellent adsorption performance towards cationic dyes (q_max=343.6 and 421.9 mg g^?1 for methylene blue and rhodamine B, respectively).     

氮掺杂介孔碳的制备及其电化学超电容性能

通过直接炭化沸石咪唑酯骨架结构材料（ZIF-8）纳米多面体,成功制备了氮掺杂介孔碳（NMCs）. 采用扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线衍射（XRD）、拉曼光谱、X射线光电子能谱（XPS）及比表面和孔隙度分析仪对其微观形貌和结构进行了表征,并对NMCs的电化学超电容性能进行了测试. 结果表明：NMCs具有规整的形貌、介孔纳米结构和较大比表面积（2737 m²·g^-1）;由于氮元素掺杂所赋予的优异的表面润湿性和赝电容性能,且介孔结构有利于电解质到达电极活性材料表面,NMCs表现出优异的电化学超电容性能,在1 A·g^-1的电流密度下,1.0 mol·L^-1H₂SO₄溶液中的比电容值为307 F·g^-1,并具有良好的功率特性;此外,在10A·g^-1的大电流密度下充放电循环5000次后,NMCs的比电容值保持率为96.9%.     

Remediation of azo-dyes based toxicity by agro-waste cotton boll peels mediated palladium nanoparticles

The present study reports an environmental benign route for the synthesis of palladium nanoparticles (Pd NPs) using agro-waste empty cotton boll peels aqueous extract for the first time. Surface Plasmon Resonance (SPR) band in absorption spectrum of Pd NPs at 275 nm confirmed the formation of Pd NPs by using UV–Vis spectroscopy. Crystalline nature of Pd NPs was confirmed by powder XRD analysis. Size and morphology was studied by transmission electron microscopy (TEM). The cotton peels extract acted as a source of phytochemicals which primarily reduced Pd⁺² to Pd⁰ nanoparticles (Pd NPs) and imparted stability of Pd NPs by surface capping. The characteristic functional groups of phytochemicals in extract and capped Pd NPs surfaces were identified by FT-IR analysis. Catalytic activity of the synthesised Pd NPs was checked against reduction of hazardous azo-dyes such as Congo red, Methyl orange, Sunset yellow and Tartrazine with NaBH₄ as electron donors. Pd NPs catalysed reduction of all azo-dyes by NaBH₄ in aqueous medium was monitored by UV–visible spectroscopy where Pd NPs mediated transfer of electrons from NaBH₄ to azo-dyes as carrier. The synthesized Pd NPs acted as a good catalyst and could be a promising material in degrading toxic azo-dyes from industrial effluents and wastewater.     

Properties of nanostructured GaN prepared by different methods

Various methods have been employed to prepare nanostructured GaN exhibiting reasonable surface areas. The methods include ammonolysis of γ-Ga₂O₃ or Ga₂O₃ prepared in the presence of a surfactant, and the reaction of a mixture of Ga₂O₃ and Ga(acac)₃ with NH₃. The latter reaction was also carried out in the presence of H₃BO₃. All the methods yield good GaN samples as characterized by X-ray diffraction, electron microscopy and photoluminescence measurements. Relatively high surface areas were obtained with the GaN samples prepared by the ammonolysis of γ-Ga₂O₃ (53 m² g⁻¹), and of Ga₂O₃ prepared in the presence of a surfactant (66 m² g⁻¹). GaN obtained by the reaction of NH₃ with a mixture of Ga₂O₃, Ga(acac)₃ and boric acid gave a surface area of 59 m² g⁻¹. GaN nanoparticles prepared by the nitridation of mesoporous Ga₂O₃ samples generally retain some porosity.     

Calcination temperature-dependent morphology of photocatalytic ZnO nanoparticles prepared by an electrochemical–thermal method

ZnO nanoparticles (NPs) with tunable morphologies were synthesized by a hybrid electrochemical–thermal method at different calcination temperatures without the use of any surfactant or template. The NPs were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction, dynamic light scattering, thermogravimetry–differential thermal analysis, scanning electron microscope and N₂ gas adsorption–desorption studies. The FT-IR spectra of ZnO NPs showed a band at 450 cm^?1, a characteristic of ZnO, which remained fairly unchanged at calcination temperatures even above 300 °C, indicating complete conversion of the precursor to ZnO. The products were thermally stable above 300 °C. The ZnO NPs were present in a hexagonal wurtzite phase and the crystallinity of ZnO increased with an increasing calcination temperature. The ZnO NPs calcined at lower temperature were mesoporous in nature. The surface areas of ZnO NPs calcined at 300 and 400 °C were 51.10 and 40.60 m² g^?1, respectively, which are significantly larger than commercial ZnO nanopowder. Surface diffusion has been found to be the key mechanism of sintering during heating from 300 to 700 °C with the activation energy of sintering as 8.33 kJ mol^?1. The photocatalytic activity of ZnO NPs calcined at different temperatures evaluated by photocatalytic degradation of methylene blue under sunlight showed strong dependence on the surface area of ZnO NPs. The ZnO NPs with high surface area showed enhanced photocatalytic activity.