Ru3(CO)12-catalyzed dehydrogenative SiN coupling of indoles with hydrosilanes without additive

An efficient Ru₃(CO)₁₂-catalyzed dehydrogenative SiN coupling reaction of indoles, pyrrole, and carbazole with hydrosilanes is reported. The reaction does not need any external additive. This catalytic reaction has a wide substrate range, excellent functional group tolerance, and high to excellent reaction efficiency. Gram-scale synthesis demonstrates the practicability of this synthetic method.     

New one‐ pot synthesis of pyrazolo[3,4‐c]pyridazine and isoxazolo‐[5,4‐b]pyridine derivatives from potassium cyanoacetahydroxamate

The reaction of potassium cyanoacetohydroxamate 1 with ethyl 2‐aryl‐hydrazono‐3‐oxobutyrates 2 gave the unexpected pyrazolo[3,4‐c]pyridazines 7 and isoxazolo[5,4‐b]pyridines 10 via a one‐pot reaction. A mechanistic proof is suggested to account for the products.     

Catalysis and mechanistic studies of ruthenium and osmium on synthesis of anthranilic acids

Ruthenium, osmium and ruthenium + osmium catalyzed synthetic methodology was developed for the synthesis of anthranilic acids from indoles in good to excellent yields using bromamine‐B in alkaline acetonitrile–water (1:1) at 313 K. Detailed catalysis studies of ruthenium, osmium and the mixture of both were carried out for the synthetic reactions. The positive synergistic catalytic activity of Ru(III) + Os(VIII) was observed to a large extent with the activity greater than the sum of their separate catalytic activities. Detailed kinetic and mechanistic investigations for each catalyzed reactions were carried out. The kinetic pattern and mechanistic picture of each catalyzed reaction were found to be different for each catalyst and to obey the underlying rate laws: where, x, y < 1. The reactions were studied at different temperatures and the activation parameters were evaluated for each catalyzed reaction. Under the identical set of experimental conditions, the kinetics of all the three catalyzed reactions were compared with uncatalyzed reactions, revealing that the catalyzed reactions were 6‐ to 42‐fold faster. The catalytic efficiency of aforementioned catalysts followed the order: Ru(III) + Os(VIII) > Os(VIII) > Ru(III). This trend may be attributed to the different d‐electronic configuration of the catalysts. The proposed mechanisms and the rigorous kinetic models derived give results that fit well with the experimental data in each catalyzed reaction. Copyright © 2010 John Wiley & Sons, Ltd.     

The 59th Annual Meeting of the International Society of Electrochemistry in Seville

Electrochemistry down to the molecular level was the main theme of the 59th annual meeting of the International Society of Electrochemistry (ISE, see logo). Around 1400 scientists from all over the world met in Seville to discuss modern aspects, progress in methods and new mechanistic insights.

     

A Single Residue Influences the Reaction Mechanism of Ammonia Lyases and Mutases

All ways lead to Rome? Computer modeling and kinetic measurements identified a distinct residue in Phe/Tyr ammonia lyases (PAL/TAL) which controls whether the Friedel–Crafts or an E₁cB reaction mechanism takes place. Hence, Glu484 in pcPAL favors the Friedel–Crafts reaction (see picture, MIO=4‐methylidene imidazol‐5‐one) whereas an Asn in TAL gives an elimination reaction. These mechanistic investigations also reveal activity of a PAL mutant and a TAL towards an amino alcohol.

     

Cu catalyzed cross-dehydrogenative coupling reaction for the synthesis of 3-hydroxy-2-pyrrolidinones

A new convenient strategy for the synthesis of 3-hydroxy-2-pyrrolidinone derivatives featuring regioselective CC coupling has been developed. This is a Cu (II) catalyzed cross dehydrogenative coupling (CDC) involving enamino-ketones of benzyl amines and di-alkyl acetylenedicarboxylate, followed by cyclization by primary amines. TBHP (tert-butyl hydroperoxide) has been used as the oxidant to promote the coupling protocol. This synthetic route principally demonstrates the scope of CDC reaction and also applicable to gram-scale synthesis.     

Experimental and theoretical studies on rhodium-catalyzed direct CH benzoxylation reaction

An efficient Rh(III)-catalyzed, chelation assisted CH benzoxylation reaction has been developed, releasing H₂O as the single byproduct. The reaction proceeded under mild conditions, with controllable mono- and dioxygenation selectivity, thus providing a good complement to previous CH oxygenation reactions. DFT calculations support that a nucleophilic addition pathway is most likely involved in the current reaction system.     

Rhodium-catalyzed NH-indole-directed ortho CH coupling of 2-arylindoles with diazo compounds via metal carbene migratory insertion

A high regioselective rhodium-catalyzed ortho CH coupling of 2-arylindoles with diazo compounds via NH-indole-directed CH bond activation has been developed. The catalytic reaction features mild reaction conditions, broad substrate scope and good functional group tolerability.     

Curing Kinetics of Diglycidyl Ether of Bisphenol A and Diaminodiphenylmethane Using a Mechanistic Model

Summary: The curing kinetics of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐diaminodiphenylmethane (DDM) was analyzed using isothermal differential scanning calorimetry (DSC) modes by using a simple mechanistic model which includes two rate constants, k₁ and k₂, two reaction orders, n₁ and n₂, and the ratio of initial concentration of hydroxyl group to initial epoxy concentration, c₀. Analyses of DSC data indicated that an autocatalytic reaction existed in the curing process. The mechanistic model proposed in this paper fits the experimental data exactly. Rate constants, k₁ and k₂ have been found to increase with rising curing temperature. The activation energies for the relative reactions were determined to be 66.00 ± 4.21 and 50.74 ± 8.92 kJ/mol, respectively. The complex equivalent constant, K, decreased with increasing temperature. Diffusion control was incorporated to describe the cure in the latter stages.

Comparison of experimental data with the mechanistic model for the curing kinetics of DGEBA with DDM.     

Selective,C-3 Friedel-Crafts acylation to generate functionally diverse,acetylated Imidazo[1,2-a]pyridine derivatives

Carbon-carbon bonds are integral for pharmaceutical discovery and development. Frequently, CC bond reactions utilize expensive catalyst/ligand combinations and/or are low yielding, which can increase time and expenditures in pharmaceutical development. To enhance CC bond formation protocols, we developed a highly efficient, selective, and combinatorially applicable Friedel-Crafts acylation to acetylate the C-3 position of imidazo[1,2-a]pyridines. The reaction, catalyzed by aluminum chloride, is both cost effective and more combinatorial friendly compared to acetylation reactions requiring multiple, stoichiometric equivalents of AlCl₃. The protocol has broad application in the construction of acetylated imidazo[1,2-a]pyridines with an extensive substrate scope. All starting materials are common and the reaction requires inexpensive, conventional heating methods for adaptation in any laboratory. Further, the synthesized compounds are predicted to possess GABA activity through a validated, GABA binding model. The developed method serves as a superior route to generate C-3 acetylated imidazo[1,2-a]pyridine building-blocks for combinatorial synthetic efforts.     

Synthesis and photoinitiated cationic polymerization of monomers with the silsesquioxane core

A synthetic scheme was developed to prepare cationically polymerizable octafunctional monomers with silsesquioxane (T₈) cores. Epoxy and 1-propenoxy functional groups were attached to the core by the hydrosilation of T with an appropriate precursor. The steric constraints and the requirements for the hydrosilation reaction are discussed. The monomers were fully characterized and then polymerized by exposure to ultraviolet irradiation in the presence of onium salt photoinitiators. The polymerization conditions for the monomers were optimized and compared with each other using real-time infrared spectroscopy. Thermal analysis was also performed on the resulting crosslinked polymers. © 1997 John Wiley & Sons, Inc.     

Concept of Ir-catalyzed CH bond activation/borylation by noncovalent interaction

Noncovalent interactions play a fundamental role in molecular biology, crystal engineering, supramolecular chemistry, drug design, sensing applications, and many other research fields in the chemical sciences. Because of this importance, thorough research efforts have been focused on the interpreting and quantifying these interactions, which include H-bonding, electrostatic effects, ππ interaction, cation-π interaction, hydrophobic-hydrophobic interaction, van der Waals forces, and other such type of interactions. However, on the synthetic standpoint, use of these noncovalent interactions are rare, although might be beneficial for the site-selective CH bond activation and functionalization by transition metal catalysis. In this context, iridium-catalyzed CH borylation has gained immense popularity due to the versatility conferred to the CB bonds. Very recently, researchers have started employing these interactions as a governing factor for attaining regioselectivity in arene CH borylation. In this perspective, we will focus on the advancements made so far by the use of various noncovalent interactions in Ir-catalyzed borylations.     

Synthesis of cyclic olefins via Mitsunobu C-alkylation followed by Ramberg-Bäcklund ring contraction

Cyclic olefins were prepared via a novel synthetic approach that involves the formation of two CC bonds in a potentially stereoselective fashion. The first bond is formed by employing a Mitsunobu dehydrative C-alkylation; the second CC bond involves a ring contraction via Ramberg-Bäcklund rearrangement.     

Four-component synthesis of alkyl [2-[(cyclohexylamino)carbonyl]-4-oxo-2H-chromen-3(4H)-ylidene]methyl 3,4,5,6-tetrahalophthalates via a domino O-acylation/α-addition cyclization/alcoholysis sequence

A novel protocol was developed for the synthesis of alkyl [2-[(cyclohexylamino)carbonyl]-4-oxo-2H-chromen-3(4H)-ylidene]methyl 3,4,5,6-tetrahalophthalate derivatives via the one-pot, four-component domino O-acylation/α-addition cyclization/alcoholysis reaction of tetrahalophthalic anhydrides, 3-formylchromones, cyclohexyl isocyanide and various alcohols. The highlights of this novel cascade reaction include mild reaction conditions, easy workup, and high bond efficiency resulting in the formation of four new bonds (two CO, one CO and one CC) in a single operation.     

Silver(II) oxide-mediated synthesis of 2,4-diarylquinazolines

A single-pot procedure for the synthesis of 2,4-diarylquinazolines is described which involves a silver oxide-mediated CH activation/CN bond formation process. The generality of this method with respect to substituent effects is presented along with studies leading to process optimization. Mechanistic investigations provide support for the involvement of radical intermediates in the reaction process.     

An alternate approach for the synthesis of 2‐substituted‐arylimidazo[4,5‐b]pyridines and their anti‐bacterial activity

An alternate method for the convenient preparation of the imidazo[4,5‐b]pyridines from 2,3‐pyridinediamine and 2‐aryl‐3(1)‐benzoxazine‐4H‐one has been illustrated. The mechanistic pathway for the formation of the product 4 has been proposed. All the compounds prepared herein were screened for their anti‐ bacterial properties.     

Morita-Baylis-Hillman enal-based triple cascade strategy for anti-selective synthesis of highly functionalized tetrahydropyridines using iminium-enamine catalysis

A novel and efficient three-component coupling strategy for stereoselective synthesis of highly substituted tetrahydropyridines (THP) is reported in high yield (83–94%) with excellent diastereoselectivity (95–99%) in favor of anti-isomer. The reaction proceeds via sequential iminium-iminium-enamine mediated formation of three consecutive CC, CC and CN bonds in one-pot through reaction of [E]-α-cyano/nitro unsaturated aldehyde, activated methylene and aldimine/phenyl-N-tosyl-methanimine and opens up a new aspect for the utility of Morita-Baylis-Hillman (MBH) adducts in THP synthesis.     

Photocatalytic anion oxidation achieves direct aerobic difunctionalization of alkenes leading to β-thiocyanato alcohols

A novel visible light-driven oxidative cascade reaction for the synthesis of β-thiocyanato alcohols via difunctionalization of alkenes is described for the first time. In this protocol inorganic ion thiocyanate was successfully converted into radical through photocatalysis by employing Rose Bengal as a photocatalyst to mediate the single-electron transfer. This hydroxylation process did not need extra reducing agent and the new CS and CO bonds could be constructed in one pot. Molecular oxygen not only was used as an excellent terminal oxidant, but also served as a green oxygen source, which is one of the most ideal processes to realize CH bond oxidation functionalization. Moreover, the reaction also proceeded very well under irradiation of sunlight.     

A kinetic study of the autocatalytic permanganate oxidation of formic acid

The kinetics of the permanganate oxidation of formic acid in aqueous perchloric acid has been studied. The results indicate that this reaction is autocatalyzed by both manganese(II) ion (formed as a reaction product) and colloidal manganese dioxide (formed as an intermediate). The apparent rate constants corresponding to the noncatalytic and autocatalytic reaction pathways are given, respectively, by the following equations The activation energies associated with the true rate constants, ??, ??, ??, ??, ??, and ?? are 37.2, 62.5, 70.9, 52.5, 40.8, and 59.9 kJ mol^?1, respectively. The percentage of the total reaction corresponding to each pathway is given for typical experimental conditions. Mechanisms in agreement with the kinetic data are proposed for the six different reaction pathways observed.     

Modeling of Nitroxide‐Mediated Semibatch Radical Polymerization

A mechanistic model is developed for high‐temperature (138 °C) styrene semibatch thermally and conventionally initiated FRP, as well as NMP with a two‐component initiating system (tert‐butyl peroxyacetate, 4‐hydroxy‐TEMPO). The model, using kinetic coefficients from literature, provides a good representation of the FRP experimental results. Implementation of a gel effect correlation to represent the change in the diffusion‐controlled termination rate coefficient with conversion improves the fit to the thermally initiated system, but is not required to represent the production of low molecular weight material ( Dalton) by conventionally initiated FRP or NMP. The low initiator efficiency found in NMP is well explained by a reaction network involving combination of free nitroxide with methyl radicals formed from initiator decomposition.