Synthesis of amide derivatives of chlorin <Emphasis Type="Italic">e</Emphasis><Subscript>6</Subscript>

A number of secondary and tertiary chlorin e ₆-13-amides were synthesized in high yield by the action of primary and secondary amines on methylpheophorbide a under mild conditions. Unlike the secondary amides, tertiary 13-amides were shown to exist as two stereoisomers differing by orientation of the amide group plane with respect to the macroring. The reaction of methylpheophorbide a with 2-aminoethanol gave chlorin e ₆ derivatives containing one, two, and three hydroxy groups.     

Diagram of the PbF<Subscript>2</Subscript>–SnF<Subscript>2</Subscript> system

A phase diagram of the PbF₂–SnF₂ system has been studied by differential thermal analysis and X-ray powder diffraction. The system forms Pb_1–хSn_хF₂ (х ≤ 0.33) solid solution and three compounds. Pb₂SnF₆ decomposes in solid state by a peritectoid reaction at 350°С; Pb₃Sn₂F₁₀ and PbSnF₄ melt by peritectic reactions at 565 and 380°С, respectively. The eutectic coordinates are 180°С, 90 mol % SnF₂.     

Neutron diffraction study of dehydrogenation of titanium carbohydrides TiC<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>H<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>

The possibility of the synthesis of hydrogen-nonstoichiometric cubic titanium carbide ТiС _х of high purity from powdery nonstoichiometric cubic titanium carbohydride ТiС _х H _y or nonstoichiometric titanium carbide with admixture hydrogen by annealing in a continuously maintained vacuum of no worse than 1.33 × 10^–3 Pa at temperatures of 600–750°C for several hours has been shown. Similar annealing at higher temperatures (T ≥ 800°C) does not lead to the complete removal of hydrogen from a sample due to intensive sintering. In this case, it seems that pores between sintered particles are hydrogen traps, and the release of hydrogen through the surface of sintered particles is hindered.     

Phase Diagrams of the <Emphasis Type="Italic">n</Emphasis>-Decane–<Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane, <Emphasis Type="Italic">n</Emphasis>-Decane–Cyclododecane,and <Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane Systems

The n-decane–n-hexadecane–cyclododecane, n-decane–cyclododecane, and n-hexadecane–cyclododecane systems are studied by means of low-temperature differential thermal analysis using a differential scanning heat flow calorimeter. It is noted that all studied systems belong to the eutectic type. It is concluded that in the n-decane–n-hexadecane–cyclododecane system, the eutectic composition contains 85.0 wt % n-С₁₀Н₂₂, 4.0 wt % n-С₁₆Н₃₄, and 11.0 wt % С₁₂Н₂₄. It has a melting point of ?35.0°C.     

Phase Equilibrium States in the <Emphasis Type="Italic">n</Emphasis>-Dodecane–<Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane System

A three-component system comprising cyclododecane and n-alkanes is studied by means of differential thermal analysis on a differential scanning microcalorimeter. It is concluded that the investigated system is of the eutectic type and the n-dodecane–n-hexadecane–cyclododecane eutectic mixture system is 73.0 wt % n-С₁₂Н₂₆, 9.0 wt % n-С₁₆Н₃₄, and 18.0 wt % С₁₂Н₂₄. Its melting point is found to be ?17.7°C.     

Synthesis of Block Copolymers of Styrene with <Emphasis Type="Italic">D</Emphasis>,<Emphasis Type="Italic">L</Emphasis>-Lactide by the Sequential Controlled Cationic Polymerization and Ring-Opening Anionic Polymerization

The cationic polymerization of styrene initiated by the system 2-chloro-2-phenylpropane–TiCl₄–pyridine is studied in a mixture CH₂Cl₂–n-hexane at a temperature of –80°С. It is shown that under these conditions polymerization occurs via the living mechanism at [monomer]: [initiator] ≤ 100. The method of preparing polystyrenes with terminal primary hydroxyl groups (M_n = 4000–10000 g/mol) by the sequential controlled cationic polymerization of styrene and the in situ alkylation of 4-phenoxy-1-butanol by polystyrene macrocations is proposed. The resulting functionalized polystyrenes are used as macroinitiators of anionic-coordination ring-opening polymerization of D,L-lactide in the presence of tin bis(2-ethyl hexanoate) [Sn(Oct)₂] in toluene at 80°С. Copolymers polystyrene-block-poly(D,L-lactide) with the controlled length of the poly(D,L-lactide) block (M_n = 10000–17000 g/mol) and a relatively low molecular-weight distribution (M_w/M_n = 1.6–1.8) are synthesized. Formation of the block copolymers is confirmed by ¹Н NMR spectroscopy, gel-permeation chromatography, and atomic force microscopy.     

Physicochemical properties of compounds of alkyl sulfates and cationic copper(II) complexes with some organic reagents

Compounds of alkyl sulfates and cationic copper(II) complexes with some organic reagents (pyridine, 1,10-phenanthroline, 2,2'-dipyridyl) were prepared, and their physicochemical characteristics (composition, thermal stability, solubility) were determined. The synthesized compounds are poorly soluble (solubility product K_S = n×10^–20–n×10^–22) and thermally stable (90–260°С). An effect of the hydrophobilicity of alkyl sulfates on the UV characteristics of the copper(II)–organic reagent systems and on the solubility of the studied compounds was evaluated.     

Structure of A Coordination Polymer [Cu(En)<Subscript>2</Subscript>CrO<Subscript>4</Subscript>]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

The crystal structure of [Cu(En)₂CrO₄]_n (En is ethylenediamine) is determined: a = 14.7359(4) Å, b = 9.8083(3) Å, c = 14.2664(4) Å, V = 2061.98(10) ų, space group Cmce, Z = 8, d_x = 1.931 g/cm³. It is demonstrated that the studied phase is isostructural with [Сu(Еn)₂SO₄]_n. A pseudotetragonal copper atom coordination (Cu–N 2.0204 Å and 2.0244 Å, ∠N–Cu–N 84.73°) is completed to distorted octahedral by two oxygen atoms of chromate anions (Cu–O 2.433 Å and 2.380 Å).     

Coprecipitation of calcium hydroxyapatite,graphene oxide,and chitosan from aqueous solutions

We determined the character of interactions between calcium hydroxyapatite Са₁₀(РO₄)₆(ОН)₂ (HA), graphene oxide (GO), and chitosan (С₆Н₁₁NO₄) _n (CHT) to yield HA/CHT/GO nanocomposites (NCs) in the СаС1₂–(NH₄)₂НРО₄–NH₃–Н₂О–(С₆Н₁₁NO₄) _n –GO system (25°С). A set of physicochemical methods helped us to elucidate composition–synthesis parameters–structure–particle size–properties correlations for the prepared NCs and to prove the feasibility to manufacture NCs with tailored HA, CHT, and GO contents, described by the bulk formula Са₁₀(РО₄)₆(ОН)₂ · х(С₆Н₁₁NO₄) _n · yGO · zН₂О, where х = 0.1, 0.2, 0.3; y = 0.6, 1.2, 2.4; and z = 6.0–7.4.     

Synthesis and structure of bis(1,2-diaminoethane) copper(II) bis(<Emphasis Type="Italic">o</Emphasis>-hydroxybenzoate) monohydrate and <Emphasis Type="Italic">trans</Emphasis>-diaquabis(1,2-diaminoethane)copper(II) bis(<Emphasis Type="Italic">o</Emphasis>-aminobenzoate)

X-ray structural analysis has been performed for two complex compounds: Cu(en)₂(o-HB)₂H₂O (I) (a = 16.873(4) Å, b = 8.713(2) Å, c = 14.803(3) Å, β = 91.15(2)°, V = 2175.8(8) ų, C2/c, Z = 4, R(F) = 0.0263, 1516 reflections with I > 3σ (I)) and [Cu(en)₂(OH₂)₂]²⁺(o-AB^?)₂ (II) (a = 7.488(5) Å, b = 22.122(8) Å, c = 7.856(5) Å, β = 118.77(2)°, V = 1140.7(11) ų, P2₁/n, Z = 2, R(F) = 0.0432, 1684 reflections with I > 3σ(I)) synthesized under identical conditions (en is ethylenediamine, o-HB is o-hydroxybenzoate, and o-AB is o-aminobenzoate). Although the compounds were assumed to have similar structures and the Cu-Lig bond lengths and the cis and trans angles are acceptable for an octahedral structure, the geometric parameters of o-HB suggest that the copper atom has a plane square environment.     

Thermal Rearrangements of 3<Emphasis Type="Italic">H</Emphasis>- and 4<Emphasis Type="Italic">H</Emphasis>-Pyrazoles Prepared by Reactions of 9-Diazofluoren with Methyl Tetrolate and Methyl 3-Phenylpropiolate

9-Diazofluoren adds in Et₂O at 20°C to methyltetrolate in keeping with Auwers rule and nonregioselectively adds to methyl-3-phenylpropiolate with the formation of spirocyclic 3H-pyrazoles. The methyltetrolate adduct at boiling in toluene converts into methyl 3a-methyl-3aH-dibenzo[e,g]indazole-3-carboxylate, at 190°C in benzene, into methyl 3-methyl-2H-dibenzo[e,g]indazole-2-carboxylate, and at 160°C in methanol, into 3-methyl-2H-dibenzo[e,g]indazole. Auwers adduct of methyl 3-phenylpropiolate at boiling in benzene gives cyclopropene derivative and at boiling in methanol isomerizes into methyl 3a-phenyl-3aHdibenzo[e,g]indazole-3-carboxylate. Anti-Auwers adduct at boiling in benzene isomerizes into methyl 2-phenylpyrazolo[1,5-f]phenanthridine-3-carboxylate.     

Ternary Reciprocal System K,Pb∥Cl,WO<Subscript>4</Subscript>

The phase diagram of the ternary reciprocal system K, Pb∥Cl, WO₄ was studied for the first time by the calculation–experimental method and differential thermal and X-ray powder diffraction analyses. Chemical interactions between components were described, metathesis and complexation reactions were revealed, and the coordinates of binary and ternary eutectics were found (mol %): e₄(410°C, 48% KCl, 52% PbCl₂), e₅(424°C, 23% KCl, 77% PbCl₂), P(490°C, 63.5% KCl, 36.5% PbCl₂), e₆(487°C, 91% PbCl₂, 9% PbWO₄), e₇(428°C, 30.5% KCl, 60.5% PbCl₂, 9% PbWO₄) (eutectic in the stable section D₂–PbWO₄), e₈(650°C, 80% KCl, 20% PbWO₄), e₉(650°C, 70% KCl, 15% K₂WO₄, 15% PbWO₄) (binary eutectic in the stable section D₁–KCl), E₁(620°C, 59% KCl, 34% K₂WO₄, 7% PbWO₄), E₂(640°C, 75% KCl, 5% K₂WO₄, 20% PbWO₄), E3(400°C, 46% KCl, 6% PbWO₄, 48% PbCl₂), E₄(410°C, 21% KCl, 9% PbWO₄, 70% PbCl₂), and P_о(468°C, 56% KCl, 10% PbWO₄, 34% PbCl₂).     

New Phosphate-Sulfates with NZP Structure

NaZr_2–xB_x(PO₄)_3–2x(SO₄)_2x (0 ≤ x ≤ 1.25, B = Mg, Co, Ni, Cu, Zn), and NaZr_2–xR_x(PO₄)_3–x(SO₄)_x (0 ≤ x ≤ 1.25, R = Al, Fe) phosphate-sulfates series have been prepared by a sol–gel process. These compounds belong to the NaZr₂(PO₄)₃ (NZP) structure family and crystallize in hexagonal crystal system, space group R\(\bar 3\)c. Limited solid solution series were found to exist; their formation temperatures and thermal stability limits were determined. Particle sizes as determined by microstructure observation were 50–200 nm, and for Cu- and Zn-containing samples, 200–500 nm. The thermal expansion of phosphate-sulfate NaZr_1.25Cu_0.75(PO₄)_1.5(SO₄)_1.5 was studied in the range 25–700°C. Thermal expansion coefficients and thermal expansion anisotropy were found to be α_a =–5.40 × 10^–6 °C^–1, α_с = 18.88 × 10^–6 °C^–1, α_avg = 2.69 × 10^–6 °C^–1, and Δα = 24.28 × 10^–6 °C^–1.     

Synthesis,structure, and antibacterial properties of ternary rare-earth complexes with <Emphasis Type="Italic">o</Emphasis>-methylbenzoic Acid and 1,10-phenanthroline

Ternary rare-earth complexes with o-methylbenzoic acid (o-MBA) and 1,10-phenanthroline (Phen) Ln₂(o-MBA)₆(Phen)₂ · nH₂O(n = 0, 1) (Ln = La, Pr, Y, Yb) were synthesized and characterized by elemental analysis, IR, X-ray diffraction, and TG-DTG means. The complex La₂(o-MBA)₆(Phen)₂ · H₂O (I) is composed of two species of binuclear molecules in which the La³⁺ ion is coordinated with two nitrogen atoms of Phen and seven oxygen atoms of carboxylate groups. The carboxylate groups were bonded to La³⁺ in three modes: chelating-bidentate, bridging-bidentate, and chelating-bridging tridentate. The La³⁺ ion adopted a vigorous distorted monocapped square antiprism geometry. Complex I belongs to the triclinic crystal system, P space group, lattice parameters: a = 13.058(3), b = 12.7584(11), c = 20.773(4) Å, α = 101.18(3)°, β = 93.88(3)°, γ = 115.82(3)°, V = 3283.0(11)ų, Z = 2, ρ_calcd = 1.484 mg/m³, M _r = 1467.06, F(000) = 1476, μ = 1.350 mm^-1. The structure was refined to R _l = 0.0631 and wR ₂ = 0.1504. The antibacterial activity test indicates that these complexes exhibit better antibacterial ability against Escherichia coli and Staphylococcus aureus than the corresponding rare-earth chloride or o-MBA.     

The thermodynamic properties of the [(Me<Subscript>3</Subscript>Si)<Subscript>7</Subscript>C<Subscript>60</Subscript>]<Subscript>2</Subscript> fullerene complex

The temperature dependence of the heat capacity C _p ^o of the [(Me₃Si)₇C₆₀]₂ fullerene complex was measured for the first time using precision adiabatic vacuum calorimetry over the temperature range 6.7–340 K and high-accuracy differential scanning calorimetry at 320–635 K. For the most part, the error in the C _p ^o values was about ±0.5%. An irreversible endothermic effect caused by the splitting of the dimeric bond between fullerene fragments and the thermal decomposition of the complex was observed at 448–570 K. The thermodynamic characteristics of this transformation were calculated and analyzed. Multifractal analysis of the low-temperature (T < 50 K) heat capacity was performed, and conclusions were drawn concerning the character of the heterodynamicity of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H ^o (T) ? H ^o (0), S ^o (T) ? S ^o (0), and G ^o (T) ? H ^o (0) over the temperature range from T → 0 to 445 K and estimate the standard entropy of formation of the compound from simple substances at 298.15 K. The standard thermodynamic properties of [(Me₃Si)₇C₆₀]₂ are compared with those of the (C₆₀)₂ dimer, the [(η⁶-Ph₂)₂Cr]⁺[C₆₀]^?? fulleride, and the initial C₆₀ fullerene.     

Synthesis,photophysical properties,and photochemical activity of the water-soluble dyad based on fullerene С<Subscript>60</Subscript> and chlorin <Emphasis Type="Italic">e</Emphasis><Subscript>6</Subscript> derivatives

Chlorin e₆ derivative and water-soluble dyad resulting from covalent bonding of polyanionic fullerene С₆₀ derivative to chlorin e₆ derivative were synthesized and studied for spectral properties and photochemical activity. A considerable change in the absorption spectra and pronounced fluorescence quenching for the chlorin moiety included in the dyad were identified. The singlet excited state of chlorin is quenched via electron transfer from the excited chlorin to the fullerene core. A comparison of the photochemical activities of the test compounds in aqueous solutions showed a tenfold increase in the photochemical activity of the chlorin–fullerene dyad compared with free chlorin per absorbed light quantum.     

Molecular structure and conformation of nitrobenzene reinvestigated by combined analysis of gas-phase electron diffraction,rotational constants,and theoretical calculations

The molecular structure and conformation of nitrobenzene has been reinvestigated by gas-phase electron diffraction (GED), combined analysis of GED and microwave (MW) spectroscopic data, and quantum chemical calculations. The equilibrium r _e structure of nitrobenzene was determined by a joint analysis of the GED data and rotational constants taken from the literature. The necessary anharmonic vibrational corrections to the internuclear distances (r _e ? r _a) and to rotational constants (B _e ⁽ⁱ⁾  ? B ₀ ⁽ⁱ⁾ ) were calculated from the B3LYP/cc-pVTZ quadratic and cubic force fields. A combined analysis of GED and MW data led to following structural parameters (r _e) of planar nitrobenzene (the total estimated uncertainties are in parentheses): r(C–C)_av = 1.391(3) Å, r(C–N) = 1.468(4) Å, r(N–O) = 1.223(2) Å, r(C–H)_av = 1.071(3) Å, \({\angle}\)C2–C1–C6 = 123.5(6)°, \({\angle}\)C1–C2–C3 = 117.8(3)°, \({\angle}\)C2–C3–C4 = 120.3(3)°, \({\angle}\)C3–C4–C5 = 120.5(6)°, \({\angle}\)C–C–N = 118.2(3)°, \({\angle}\)C–N–O = 117.9(2)°, \({\angle}\)O–N–O = 124.2(4)°, \({\angle}\)(C–C–H)_av = 120.6(20)°. These structural parameters reproduce the experimental B ₀ ⁽ⁱ⁾ values within 0.05 MHz. The experimental results are in good agreement with the theoretical calculations. The barrier height to internal rotation of nitro group, 4.1±1.0 kcal/mol, was estimated from the GED analysis using a dynamic model. The equilibrium structure was also calculated using the experimental rotational constants for nitrobenzene isotopomers and theoretical rotation–vibration interaction constants.     

Preparation and thermal reliability of <Emphasis Type="Italic">N</Emphasis>-butyl stearate/methyl palmitate composite phase change material

In this study, a series of binary mixtures of N-butyl stearate (nBS) and methyl palmitate (MP) were used to produce a novel composite phase change material (CPCM) for potential application in the eastern China, and their thermal properties were investigated by differential scanning calorimetry (DSC). The results of DSC indicated that the mixture consisting of 10 mass% nBS and 90 mass% MP is optimum as the CPCM in terms of the phase change temperature ranges (T _f = 19.74–5.59 °C; T _m = 18.34–33.80 °C) and latent heats (ΔH _f = 176.8 J g^?1; ΔH _m = 189.3 J g^?1). On the other hand, the thermal reliability and chemical stability of the CPCM after 120, 180, 240, 300, 360 and 500 accelerated thermal cycling tests were studied by DSC and fourier transform infrared (FTIR) analysis. The results demonstrated that the CPCM had good thermal reliability and chemical stability.     

Thermodynamic properties and functions of condensed Bi<Subscript>8</Subscript>O<Subscript>11</Subscript>

The values of ΔH°₂₉₈, S°₂₉₈, H°₂₉₈–H°₀, T, ΔH _fus, and C _p(T), as well as the temperature dependences of the Gibbs energy function, are calculated for Bi₈O₁₁ oxide by proven computational methods.     

<Emphasis Type="Italic">Т–х</Emphasis> Diagram of Section BiB<Subscript>3</Subscript>O<Subscript>6</Subscript>–YbBO<Subscript>3</Subscript>

Phase equilibria were studied and a Т–х diagram of section BiB₃O₆–YbBO₃ was constructed using X-ray powder diffraction and differential thermal analysis (DTA). The diagram has a peritectic point lying near 95 mol % BiB₃O₆ at 810°С. A limited subsolidus solubility of the components is observed in α-BiB₃O₆ in the range 0 ≤ х ≤ 0.3 YbBO₃.