Novel arylpyridine‐based 1,3,4‐oxadiazoles: Synthesis,antibacterial, and anti‐inflammatory evaluation

In view of developing novel bioactive compounds, a series of 2‐(5‐[2‐methyl‐6‐arylpyridin‐3‐yl]‐1,3,4‐oxadiazol‐2‐ylthio)‐1‐arylethanones (6a–n) were designed and synthesized in good yield. Novel compounds were evaluated for their antibacterial and anti‐inflammatory activities. All synthesized compounds were screened for their antibacterial activity against Staphylococcus aureus, Bascillus subtilis, Eschericia coli, and Pseudomonas aeruginosa strains. Compounds 6a , 6b , 6c , 6h , and 6i displayed the highest antibacterial activity with minimal inhibitory concentration (MIC) values ranging from 6.25–12.5 μg/mL in comparison with the standard Ciprofloxacin. The results of anti‐inflammatory activity of carrageenan‐induced footpad edema assay indicated that tested compounds exhibited remarkable anti‐inflammatory activity with percentage of inhibition of 63.9–70.1% (potency 96.8–106.20% of indomethacin activity) after 3 hr. Particularly, 6c – e and 6j – l were found to be excellent inhibitors of inflammation, with potential higher than that of the standard, Indomethacin.     

Feasibility of Ultrafast High‐Resolution Spectroscopy in the Analysis of Molecular‐Mobility‐Restricted Samples in Deuterium‐Free Environments

The feasibility of ultrafast high‐resolution intermolecular multiple‐quantum coherence (UF‐iMQC) spectroscopy for the direct analysis of molecular‐mobility‐restricted samples that are not suitable for magic‐angle spinning, such as a jelly, hand soap, and marrow, is presented. Most components could be directly detected in their original state within 1 min without the need for tedious sample preparation processes. When we use conventional liquid nuclear magnetic resonance (NMR) method to study these systems, the spectral information could not be retrieved owing to the intrinsic inhomogeneous magnetic fields caused by sample inhomogeneity. In addition, the possibility for UF‐iMQC‐based quantifications is shown. The examples presented in this paper demonstrate the potential of UF iMQC NMR for food safety inspection, for quality testing of daily‐life supplies, or in assisting medical diagnosis.     

Metal‐Ion‐Coated Graphitic Nanotubes: Controlled Self‐Assembly of a Pyridyl‐Appended Gemini‐Shaped Hexabenzocoronene Amphiphile

The assembly line : Hexabenzocoronene amphiphiles appended with pyridyl‐terminated triethylene glycol side chains, in combination with trans‐[Pt(PhCN)₂Cl₂], lead to the formation of graphitic nanotubes. The structural features and dimensions of the nanotubes depend on the assembly conditions. A platinum(II)‐bridged cyclic dimer having two HBC units self‐assembles into a nanotubular structure.

     

2‐(1 H‐1,2,3‐Triazol‐4‐yl)‐Pyridine Ligands as Alternatives to 2,2′‐Bipyridines in Ruthenium(II) Complexes

The synthesis of a variety of 2‐(1H‐1,2,3‐triazol‐4‐yl)‐pyridines by click chemistry is demonstrated to provide straightforward access to mono‐functionalized ligands. The ring‐opening polymerization of ε‐caprolactone initiated by such a mono‐functionalized ligand highlights the synthetic potential of this class of bidentate ligands with respect to polymer chemistry or the attachment onto surfaces and nanoparticles. The coordination to Ru^II ions results in homoleptic and heteroleptic complexes with the resultant photophysical and electrochemical properties strongly dependent on the number of these ligands attached to the Ru^II core.     

Synthesis and Thermoreversible Gelation Properties of Main‐Chain Poly(pyridine‐2,6‐dicarboxamide‐triazole)s

A series of main‐chain poly(amide‐triazole)s were prepared by copper(I)‐catalyzed alkyne–azide AABB‐type copolymerizatons between five structurally similar diacetylenes 1 – 5 with the same diazide 6 . The acetylene units in monomers 1 – 5 possessed different degrees of conformational flexibility due to the different number of intramolecular hydrogen bonds built inside the monomer architecture. Our study showed that the conformational freedom of the monomer had a profound effect on the polymerization efficiency and the thermoreversible gelation properties of the resulting copolymers. Among all five diacetylene monomers, only the one, that is, 1 ‐Py(NH)₂ which possesses the pyridine‐2,6‐dicarboxamide unit with two built‐in intramolecular H bonds could produce the corresponding poly(amide‐triazole) Poly‐(PyNH)₂ with a significantly higher degree of polymerization (DP) than other monomers with a lesser number of intramolecular H bonds. In addition, it was found that only this polymer exhibited excellent thermoreversible gelation ability in aromatic solvents. A self‐assembling model of the organogelating polymer Poly‐(PyNH)₂ was proposed based on FTIR spectroscopy, XRD, and SEM analyses, in which H bonding, π–π aromatic stacking, hydrophobic interactions, and the structural rigidity of the polymer backbone were identified as the main driving forces for the polymer self‐assembly process.     

Well‐Defined Single‐Site Monohydride Silica‐Supported Zirconium from Azazirconacyclopropane

The silica‐supported azazirconacyclopropane ?SiOZr(HNMe₂)(η²‐NMeCH₂)(NMe₂) ( 1 ) leads exclusively under hydrogenolysis conditions (H₂, 150 °C) to the single‐site monopodal monohydride silica‐supported zirconium species ?SiOZr(HNMe₂)(NMe₂)₂H ( 2 ). Reactivity studies by contacting compound 2 with ethylene, hydrogen/ethylene, propene, or hydrogen/propene, at a temperature of 200 °C revealed alkene hydrogenation.     

Redox Sorption and Recovery of Silver Ions as Silver Nanocrystals on Poly(aniline‐co‐5‐sulfo‐2‐anisidine) Nanosorbents

Poly[aniline(AN)‐co‐5‐sulfo‐2‐anisidine(SA)] nanograins with rough and porous structure demonstrate ultrastrong adsorption and highly efficient recovery of silver ions. The effects of five key factors—AN/SA ratio, Ag^I concentration, sorption time, ultrasonic treatment, and coexisting ions—on Ag^I adsorbability were optimized, and AN/SA (50/50) copolymer nanograins were found to exhibit much stronger Ag^I adsorption than polyaniline and all other reported sorbents. The maximal Ag^I sorption capacity of up to 2034 mg g^?1 (18.86 mmol g^?1) is the highest thus far and also much higher than the maximal Hg‐ion sorption capacity (10.28 mmol g^?1). Especially at ≤2 mM Ag^I, the nanosorbents exhibit ≥99.98 % adsorptivity, and thus achieve almost complete Ag^I sorption. The sorption fits the Langmuir isotherm well and follows pseudo‐second‐order kinetics. Studies by IR, UV/Vis, X‐ray diffraction, polarizing microscopy, centrifugation, thermogravimetry, and conductivity techniques showed that Ag^I sorption occurs by a redox mechanism mainly involving reduction of Ag^I to separable silver nanocrystals, chelation between Ag^I and ? NH? /? N?/? NH₂/ ? SO₃H/? OCH₃, and ion exchange between Ag^I and H⁺ on ? SO₃^?H⁺. Competitive sorption of Ag^I with coexisting Hg, Pb, Cu, Fe, Al, K, and Na ions was systematically investigated. In particular, the copolymer nanoparticles bearing many functional groups on their rough and porous surface can be directly used to recover and separate precious silver nanocrystals from practical Ag^I wastewaters containing Fe, Al, K, and Na ions from Kodak Studio. The nanograins have great application potential in the noble metals industry, resource reuse, wastewater treatment, and functional hybrid nanocomposites.     

Tunable Self‐Assembly of Triazole‐Linked Porphyrin–Polymer Conjugates

The convergence of supramolecular chemistry and polymer science offers many powerful approaches for building functional nanostructures with well‐defined dynamic behaviour. Herein we report the efficient “click” synthesis and self‐assembly of AB₂‐ and AB₄‐type multitopic porphyrin–polymer conjugates (PPCs). PPCs were prepared using the copper(I)‐catalysed azide–alkyne cycloaddition (CuAAC) reaction, and consisted of linear polystyrene, poly(butyl acrylate), or poly(tert‐butyl acrylate) arms attached to a zinc(II) porphyrin core via triazole linkages. We exploit the presence of the triazole groups obtained from CuAAC coupling to direct the self‐assembly of the PPCs into short oligomers (2–6 units in length) via intermolecular porphyrinatozinc–triazole coordination. By altering the length and grafting density of the polymer arms, we demonstrate that the association constant of the porphyrinatozinc–triazole complex can be systematically tuned over two orders of magnitude. Self‐assembly of the PPCs also resulted in a 6 K increase in the glass transition temperature of the bulk material compared to a non‐assembling PPC. The modular synthesis and tunable self‐assembly of the triazole‐linked PPCs thus represents a powerful supramolecular platform for building functional nanostructured materials.     

“On‐Water,” Microwave‐Assisted,Pd‐Catalyzed Synthesis of Indoles from Imines and o‐Difunctionalized Arenes

Regioselectively substituted indoles are prepared by a Pd‐catalyzed C? C/C? N bond‐forming sequence from imines and o‐dihaloarenes or o‐haloarene sulfonates. The heterogeneous reaction as a suspension in water and under microwave heating offers important advantages in comparison with the conventional reaction in an organic solvent, among them, operational simplicity, the employment of KOH solutions instead of alkoxides, and a dramatic reduction of reaction times.     

The Formation of Large‐Area Conducting Graphene‐Like Platelets

The treatment of a suspension of graphite oxide (GO) with sodium azide leads to a material that, after reduction, features amino groups at the top and bottom of the sheets. These groups react through microcontact printing with an isothiocyanate monolayer on a silicon oxide substrate to form covalent bonds that strongly attach to the particles on the surface. With ultrasonication it is possible to obtain exfoliation of the sheets that are not covalently bound to the surface leaving single‐layer platelets attached to the substrate. The azido derivative can be also used to functionalize the graphene oxide with long alkylic chains through a click chemistry approach. This functionalization results in the exfoliation of this material in dimethylformamide. The novel materials were fully characterized by different techniques including IR spectroscopy, thermogravimetric analysis (TGA), scanning and transmission electron microscopy (SEM and TEM), X‐Ray photoelectron spectroscopy (XPS), and solid state NMR spectroscopy. The material with amino groups, after the reduction step, is conductive with a resistivity only approximately seven times larger than that of unprocessed graphite. This implies that after reduction of the GO, the conjugated sp² network is largely restored. We consider this to be an important step towards a chemical approach for forming conducting large‐area platelet films of single‐layer graphene.     

Electroactive Tetrathiafulvalenyl‐1,2,3‐triazoles by Click Chemistry: Cu‐ versus Ru‐Catalyzed Azide–Alkyne Cycloaddition Isomers

Two series of 4‐ and 5‐tetrathiafulvalenyl‐1,2,3‐triazoles, as multifunctional ligands and precursors for molecular materials, have been synthesized by copper‐ or ruthenium‐based “click” chemistry. The solid‐state structures of three ligands and two Cu^II complexes were determined. Large differences in the electron‐donating properties between the 1,4‐ and 1,5‐isomers were evidenced by cyclic voltammetry. Theoretical calculations support this observation and allow the assignment of the electronic transitions observed in UV/Vis spectra of the ligands.     

Contractile and Extensible Molecular Figures‐of‐Eight

Two large rings, 66‐ (m‐66 ) and 78‐membered ( m‐78 ) rings, each one incorporating two pairs of transition‐metal‐complexing units, have been prepared. The coordinating fragments are alternating bi‐ and tridentate chelating groups, namely, 2,9‐diphenyl‐1,10‐phenanthroline (dpp) and 2,2′,2′,6′′‐terpyridine (terpy) respectively. Both macrocycles form molecular figures‐of‐eight in the presence of Fe^II, affording a classical bis‐terpy complex as the central core. The larger m‐78 ring can accommodate a four‐coordinate Cu^I center with the formation of a {Cu(dpp)₂}⁺ central complex and a highly twisted figure‐of‐eight backbone, whereas m‐66 is too small to coordinate Cu^I. Macrocycle m‐78 thus affords stable complexes with both Fe^II and Cu^I; the ligand around the metal changes from (terpy)₂ to (dpp)₂. This bimodal coordination situation allows for a large amplitude rearrangement of the organic backbone. When coordinated to preferentially octahedrally coordinated Fe^II or Cu^II, the height of the molecule along the coordinating axis of the tridentate terpy ligands is only about 11 Å, whereas the height of the molecule along the same vertical axis is several times as large for the tetrahedral Cu^I complex. Chemically or electrochemically driven contraction and extension motions along a defined axis make this figure‐of‐eight particularly promising as a new class of molecular machine prototype for use as a constitutive element in muscle‐like dynamic systems.     

Anion‐aided Dynamic One‐pot Self‐assembly of Rectangular Metallacycles

The tetracopper(I) complex [{Cu₂(μ‐dppm)₂}₂(μ‐1,4‐O₂CC₆H₄ (CO₂ )₂)](BF₄ )₂ ( 1 (BF₄ )₂) and 1,2‐bis(4‐pyridyl)ethane (bpa) can establish a dynamic equilibrium in CH₂Cl₂ . From the equilibrium mixture containing 1 (BF₄ )₂ and bpa with the molar ratio 1 (BF₄ )₂/bpa of 1:1, a supramolecular compound [{Cu₂(μ‐dppm)₂}₂(μ‐1,4‐C₆H₄ (CO₂ )₂)(μ‐bpa)]₂(BF₄ )₄ ( 2 (BF₄ )₄) was obtained as single crystals. The crystal structure was determined by X‐ray crystallography to reveal presence of one anion inside a cationic rectangular metallacycle { 2 ⊂ BF₄ }³⁺. Both structural evidence and DFT ‐calculated results indicate that the F atoms of the anion exert weak electrostatic attraction with hydrogen atoms of the bound bpa as the framework of the cationic metallacycle. The attractive interactions apparently play an important role in stabilizing some dynamically self‐assembled precursors so as to form the final anion‐included metallacycle. Without the electrostatic help from the anion, the self‐assembly of the empty metallacycle may be hindered by a rather large endothermic free energy. The favorable electrostatic stabilization is present not only for a anion but also for other anions such as , , and even when the flexible bpa is replaced by rigid 4,4′‐bipyridine (bpy). Based on the DFT results, the metallacycle 2 (BF₄ )₄ can be easily prepared in a one‐pot reaction of [Cu(MeCN )₄](BF₄ ) with three ligands.