Polycyclic arene‐based D–A polyimide electrets for high‐performance n‐type organic field effect transistor memory devices

We report the memory characteristics of n‐type N,N′‐bis(2‐phenylethyl)‐perylene‐3,4:9,10‐tetracarboxylic diimide‐based organic field‐effect transistors (OFET) using a series of donor–acceptor (D–A) polyimide electrets of poly[4,4′‐diamino‐4″‐methyltriphenylamine‐hexafluoroisopropylidenediphthal imide] ( PI(AMTPA‐6FDA) ), poly[N,N‐bis‐(4‐aminophenyl)‐aminonaphthalene‐hexafluoroisopropylidenediphthalimide] ( PI(APAN‐6FDA) ), and poly[N,N‐bis‐(4‐aminophenyl)‐aminopyrene‐hexafluoroisopropylidenediphthalimide] ( PI(APAP‐6FDA) ). Among the polymer electrets, the OFET memory device based on PI(APAP‐6FDA) exhibits the largest memory window of 40.63 V and the best charge retention ability (maintained for over 10⁴ s with the ON/OFF current ratio about 10³) due to introducing polycyclic arene functionality of pyrene into the electron donating moiety. With the excellent carrier delocalization, pyrene successfully enhanced the charge storage ability and sustained the CT complex. Besides, PI(APAP‐6FDA)‐based OFET memory also performed well in the write‐read‐erase‐read tests for over 100 cycles. Our finding may provide a new approach for the preparation of high performance nonvolatile OFET memories with electrets of D–A polyimide systems. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 139–147     

Solution‐processable and thermally cross‐linkable fluorene‐cored triple‐triphenylamines with terminal vinyl groups to enhance electroluminescence of MEH‐PPV: Synthesis,curing, and optoelectronic properties

This study reports the synthesis, curing, and optoelectronic properties of a solution‐processable, thermally cross‐linkable electron‐ and hole‐blocking material containing fluorene‐core and three periphery N‐phenyl‐N‐(4‐vinylphenyl)benzeneamine ( FTV ). The FTV exhibited good thermal stability with T_d above 478 °C in nitrogen atmosphere. The FTV is readily cross‐linked via terminal vinyl groups by heating at 160 °C for 30 min to obtain homogeneous film with excellent solvent resistance. Multilayer PLED device [ITO/PEDOT:PSS/cured‐ FTV /MEH‐PPV/Ca (50 nm)/Al (100 nm)] was successfully fabricated using solution processed. Inserting cured‐ FTV is between PEDOT:PSS and MEH‐PPV results in simultaneous reduction in hole injection from PEDOT:PSS to MEH‐PPV and blocking in electron transport from MEH‐PPV to anode. The maximum luminance and maximum current efficiency were enhanced from 1810 and 0.27 to 4640 cd/m² and 1.08 cd/A, respectively, after inserting cured‐ FTV layer. Current results demonstrate that the thermally cross‐linkable FTV enhances not only device efficiency but also film homogeneity after thermal curing. FTV is a promising electron‐ and hole‐blocking material applicable for the fabrication of multilayer PLEDs based on PPV derivatives. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012     

Fluorene based donor‐acceptor polymer electrets for nonvolatile organic transistor memory device applications

Fluorene based donor‐acceptor polyimides, including poly[bis‐(4‐aminophenyl)fluorene‐hexanediamide] [PA(BAP F‐AC)], poly[bis‐(4‐aminophenyl)fluorene‐hexafluoroisopropylidenediphthalimide] [PI(BAPF‐6FDA)], poly[bis‐(4‐aminophenyl)fluorene‐oxydiphthalimide] [PI(BAPF‐ODPA)], and poly[bis‐(4‐aminophenyl)fluorene‐1,2,4,5‐cyclohexanetetracarboxylic diimide] [PI(BAPF‐HPMDA)], as charge storage layer (electret) are employed for nonvolatile memory device applications. The polyimides are consisted of electron‐donating fluorene diamine moiety (BAPF) and neutral (AC and HPMDA) or electron‐accepting (6FDA and ODPA) moieties, respectively. The memory characteristics of these devices can be tuned from the EORM (erase once and read many times) behavior [PA(BAPF‐AC)], semi‐flash [PI(BAPF‐ODPA)], [PI(BAPF‐HPMDA)], to a flash type memory [PI(BAPF‐6FDA)]. The PI(BAPF‐6FDA) devices show the largest memory window of 77 V and a long retention time over 10⁴ s with a high I_on/I_off current ratio of 10⁸. This is attributed to the largest torsion angle of PI(BAPF‐6FDA) stabilizing charge transfer (CT) complexes. The write‐read‐erase‐read cycles were stably operated over 100 cycles. This work provides a new insight into the relationship between the CT effect and the nonvolatile memory behavior. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 602–614     

Cascade hole transport in efficient green phosphorescent light‐emitting devices achieved by layer‐by‐layer solution deposition using photocrosslinkable‐conjugated polymers containing oxetane side‐chain moieties

A hole‐injection/transport bilayer structure on an indium tin oxide (ITO) layer was fabricated using two photocrosslinkable polymers with different molecular energy levels. Two photoreactive polymers were synthesized using 2,7‐(or 3,6‐)‐dibromo‐9‐(6‐((3‐methyloxetan‐3‐yl)methoxy)hexyl)‐9H‐carbazole) and 2,4‐dimethyl‐N,N‐bis(4‐ (4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)phenyl)aniline via a Suzuki coupling reaction. When the oxetane groups were photopolymerized in the presence of a cationic photoinitiator, the photocured film showed good solvent resistance and compatibility with a poly(N‐vinylcarbazole) (PVK)‐based emitting layer. Without the use of a conventional hole injection layer (HIL) of poly(3,4‐ethylenedioxythiophene)/(polystyrenesulfonate) (PEDOT:PSS), the resulting green light‐emitting device bearing PVK: 5‐4‐tert‐butylphenyl‐1,3,4‐oxadiazole (PBD):Ir(Cz‐ppy)3 exhibited a maximum external quantum efficiency of 9.69%; this corresponds to a luminous efficiency of 29.57 cd/A for the device K‐4 configuration ITO/POx‐I/POx‐II/PVK:PBD:Ir(Cz‐ppy)3/triazole/Alq3/LiF/Al. These values are much higher than those of PLEDs using conventional PEDOT:PSS as a single HIL. The significant improvement in device efficiency is the result of suppression of the hole injection/transport properties through double‐layered photocrosslinked‐conjugated polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of pure blue emissive poly(2,7‐carbazole)s anchored by electron donor pendant

Three novel poly(2,7‐carbazole)s having hole injection and transporting pendent moieties of carbazole and triphenylamine at the N‐position were synthesized for achieving pure blue electroluminescence. The N‐pendants in the polymers correspond to N‐phenylcarbazol‐2‐yl ( P1 ), N,N‐diphenylamino‐N‐phenylcarabazol‐2‐yl ( P2) , and 4‐phenyl having a hydrocarbon chain with a triphenylamine terminal ( P3 ), respectively. Electronic, optical, and electroluminescence properties of these polymers were compared with those of a poly(2,7‐carbazole) directly connected with triphenylamine at the N‐position ( P0 ) having an aggregation‐induced emissive property. The photoluminescence (PL) spectra suggested that they could emit in the region of blue light in the film state. Especially, P2 that has the fixed and large diphenylaminocarbazolyl pendant showed a deep‐blue fluorescence with CIE(x, y) = (0.15, 0.07). The P0 , P2 , and P3 based light emitting diode devices showed maximum electroluminescence wavelengths in the range of 430–450 nm. The P2 device showed pure blue emission (CIE[x, y] = [0.18, 0.16]), high luminance (1130 cd/m²) and current density (628 mA/cm²) at 8 V, whereas low‐energy emissions around 500–600 nm were emerged at higher than 9 V. The P0 and P3 devices also showed a blue electroluminescence in the range of 8–11 V, but their luminance and efficiency were low. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2526–2534     

Aromatization and Halogenation of 3,3a,4,5‐Tetrahydro‐3‐aryl‐2‐phenyl‐2H‐benzo[g]indazole Using I2/DMSO,CuCl2/DMSO,and N‐Bromosuccinimide

The treatment of 3,3a,4,5‐tetrahydro‐3‐aryl‐2‐phenyl‐2H‐benzo[g]indazoles 4 with I₂/DMSO led to the oxidation of the five‐member rings ( 5 ) as well as the iodination of N‐phenyl moieties along with oxidation of the five‐member rings ( 6 ). However, the reactions of 4 with CuCl₂/DMSO gave only compounds 5 . The reaction of N‐bromosuccinimide (NBS) with compounds 4 resulted in fully aromatization along with bromination at C‐5 of the indazole rings ( 7 ). The indazole six‐member rings in compounds 5 and 6 also underwent aromatization along with bromination by using NBS ( 7 and 8 ).     

Red Phosphorescent Bis‐Cyclometalated Iridium Complexes with Fluorine‐, Phenyl‐, and Fluorophenyl‐Substituted 2‐Arylquinoline Ligands

Red phosphorescent iridium(III) complexes based on fluorine‐, phenyl‐, and fluorophenyl‐substituted 2‐arylquinoline ligands were designed and synthesized. To investigate their electrophosphorescent properties, devices were fabricated with the following structure: indium tin oxide (ITO)/4,4′,4′′‐tris[2‐naphthyl(phenyl)amino]triphenylamine (2‐TNATA)/4,4′‐bis[N‐(1‐naphthyl)‐N‐phenylamino]biphenyl (NPB)/4,4′‐bis(N‐carbazolyl)‐1,1′‐biphenyl (CBP): 8 % iridium (III) complexes/bathocuproine (BCP)/tris(8‐hydroxyquinolinato)aluminum (Alq₃)/8‐hydroxyquinoline lithium (Liq)/Al. All devices, which use these materials showed efficient red emissions. In particular, a device exhibited a saturated red emission with a maximum luminance, external quantum efficiency, and luminous efficiency of 14200 cd m^?2, 8.44 %, and 6.58 cd A^?1 at 20 mA cm^?2, respectively. The CIE (x, y) coordinates of this device are (0.67, 0.33) at 12.0 V.     

Synthesis and characterization of new complexes of the type [Ru(CO)2Cl2 (2‐phenyl‐1,8‐naphthyridine‐kN) (2‐phenyl‐1,8‐naphthyridine‐kN′)]. Preliminary applications in homogeneous catalysis

Novel ruthenium (II) complexes were prepared containing 2‐phenyl‐1,8‐naphthyridine derivatives. The coordination modes of these ligands were modified by addition of coordinating solvents such as water into the ethanolic reaction media. Under these conditions 1,8‐naphthyridine (napy) moieties act as monodentade ligands forming unusual [Ru(CO)₂Cl₂(η¹‐2‐phenyl‐1,8‐naphthyridine‐ kN )(η¹‐2‐phenyl‐1,8‐naphthyridine‐kN′)] complexes. The reaction was reproducible when different 2‐phenyl‐1,8‐naphthyridine derivatives were used. On the other hand, when dry ethanol was used as the solvent we obtained complexes with napy moieties acting as a chelating ligand. The structures proposed for these complexes were supported by NMR spectra, and the presence of two ligands in the [Ru(CO)₂Cl₂(η¹‐2‐phenyl‐1,8‐naphthyridine‐ kN )(η¹‐2‐phenyl‐1,8‐naphthyridine‐kN′)] type complexes was confirmed using elemental analysis. All complexes were tested as catalysts in the hydroformylation of styrene showing moderate activity in N,N′‐dimethylformamide. Copyright © 2008 John Wiley & Sons, Ltd.     

A novel potent non‐nucleoside reverse transcriptase inhibitor acyl­thio­carbamate derivative with extensive intra­molecular π–π inter­actions

In the crystal structure of the novel acyl­thio­carbamate derivative O‐[2‐(1,3‐dioxo‐2,3‐dihydro‐1H‐isoindol‐2‐yl)­ethyl] N‐(4‐methyl­phenyl)‐N‐(3‐nitro­benzoyl)thio­carbamate, C₂₅H₁₉N₃O₆S, intra‐ and inter­molecular π–π inter­actions occur between the phthalimide and N‐benzoyl moieties. The partial atomic charges, calculated by ab initio methods, are consistent with the observed structure.     

Photochemical Activities of N‐Nitroso Carboxamides and Sulfoximides and Their Application to DNA Cleavage

N‐Nitroso compounds containing benzene, fluorene or fluorenone rings were synthesized. Photolysis of these compounds with 312‐nm UV light provided the NO ^. species, the presence of which was corroborated by use of an EPR method and of 2‐phenyl‐4,4,5,5‐tetramethylimidazolin‐1‐oxyl 3‐oxide (PTIO) as a trapping agent. During irradiation of N‐methyl‐N‐nitroso‐9‐fluorenone carboxamide ( 14 c ) in the absence of PTIO, it underwent decomposition followed by recombination to give the heterocyclic nitric oxide radical 15 . Incorporation of intercalating moieties endowed the N‐nitroso compounds with DNA‐cleaving ability through single‐strand scission upon UV irradiation in a phosphate buffer (pH 5.0–8.0) under aerobic conditions.     

Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234     

Two regioisomers of condensed thioheterocyclic triazine synthesized from 6‐phenyl‐3‐thioxo‐2,3,4,5‐tetrahydro‐1,2,4‐triazin‐5‐one

In the crystal structure of 6‐phenyl‐3‐thioxo‐2,3,4,5‐tetrahydro‐1,2,4‐triazin‐5‐one, C₉H₇N₃OS, (I), the 1,2,4‐triazine moieties are connected by face‐to‐face contacts through two kinds of double hydrogen bonds (N—H...O and N—H...S), which form planar ribbons along the a axis. The ribbons are crosslinked through C—H...π interactions between the phenyl rings. The molecular structures of two regioisomeric compounds, namely 6‐phenyl‐2,3‐dihydro‐7H‐1,3‐thiazolo[3,2‐b][1,2,4]triazin‐7‐one, C₁₁H₉N₃OS, (II), and 3‐phenyl‐6,7‐dihydro‐4H‐1,3‐thiazolo[2,3‐c][1,2,4]triazin‐4‐one, C₁₁H₉N₃OS, (III), which were prepared by the condensation reaction of (I) with 1,2‐dibromoethane, have been characterized by X‐ray crystallography and spectroscopic studies. The crystal structures of (II) and (III) both show two crystallographically independent molecules. While the two compounds are isomers, the unit‐cell parameters and crystal packing are quite different and (II) has a chiral crystal structure.     

Two isomorphous benzene­sulfon­amide crystal structures determined by intermolecular C—H⃛O,C—H⃛π and C—H⃛Cl interactions

The title compounds, N‐[5‐(4‐chloro­phenyl)­furan‐2‐yl­methyl]‐4‐methyl‐N‐(prop‐2‐ynyl)­benzene­sulfon­amide, (Ia), and N‐[5‐(2‐chloro­phenyl)­furan‐2‐yl­methyl]‐4‐methyl‐N‐(prop‐2‐ynyl)­benzene­sulfon­amide, (Ib), both C₂₁H₁₈ClNO₃S, have isomorphous crystal structures. The crystal packing is mainly determined by intermolecular C—H?O and C—H?π interactions. These interactions are very similar in (Ia) and (Ib). Additional intermolecular C—H?Cl interactions appear less important and are different in (Ia) and (Ib). The different positions of the Cl atoms result in small variations of the crystal packing of the two compounds.     

Molecular design,synthesis, and properties of Y‐type nonlinear optical polyester containing tricyanovinylthiophene with enhanced thermal stability of second harmonic generation

1‐{3,4‐Di‐(2‐hydroxyethoxy)phenyl}‐2‐(2‐thiophenyl)ethene (5) was prepared and condensed with terephthaloyl chloride to yield polyester (6). Polymer 6 was reacted with tetracyanoethylene to give a new Y‐type polyester (7) containing 1‐(3,4‐dioxyethoxy)phenyl‐2‐{5‐(2,2,3‐tricyanovinyl)‐2‐thiophenyl)}ethenyl groups as NLO‐chromophores, which are components of the polymer backbones. Polyester 7 is soluble in common organic solvents such as N,N‐dimethylformamide and acetone. Polymer 7 showed a thermal stability up to 300 °C in thermogravimetric analysis with glass transition temperature (T_g) obtained from differential scanning calorimetry near 126 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at the 1560 nm fundamental wavelength was around 6.57 × 10^?9 esu. The dipole alignment exhibited high thermal stability up to the T_g, and there was no SHG decay below 125 °C due to the partial main‐chain character of polymer structure, which is acceptable for NLO device applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1911–1919, 2009     

Adding a Structural Context to the Deprotometalation and Trans‐Metal Trapping Chemistry of Phenyl‐Substituted Benzotriazole

Organometallic bases are becoming increasingly complex, because mixing components can lead to bases superior to single‐component bases. To better understand this superiority, it is useful to study metalated intermediate structures prior to quenching. This study is on 1‐phenyl‐1H‐benzotriazole, which was previously deprotonated by an in situ ZnCl₂ ? TMEDA/LiTMP (TMEDA=N,N,N′,N′‐tetramethylethylenediamine; TMP=2,2,6,6‐tetramethylpiperidide) mixture and then iodinated. Herein, reaction with LiTMP exposes the deficiency of the single‐component base as the crystalline product obtained was [{4‐R‐1‐(2‐lithiophenyl)‐1H‐benzotriazole ? 3THF}₂], [R=2‐C₆H₄(Ph)NLi], in which ring opening of benzotriazole and N₂ extrusion had occurred. Supporting lithiation by adding iBu₂Al(TMP) induces trans‐metal trapping, in which C?Li bonds transform into C?Al bonds to stabilise the metalated intermediate. X‐ray diffraction studies revealed homodimeric [(4‐R′‐1‐phenyl‐1H‐benzotriazole)₂], [R′=(iBu)₂Al(μ‐TMP)Li], and its heterodimeric isomer [(4‐R′‐1‐phenyl‐1H‐benzotriazole){2‐R′‐1‐phenyl‐1H‐benzotriazole}], whose structure and slow conformational dynamics were probed by solution NMR spectroscopy.     

Syntheses and properties of organosoluble polyimides based on 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐4, 7‐methanohexahydroindan

A series of organosoluble aromatic polyimides (PIs) was synthesized from 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐4,7‐methanohexahydroindan (3) and commercial available aromatic dianhydrides such as 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA), 4,4′‐sulfonyl diphthalic anhydride (SDPA), or 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropanic dianhydride (6FDA). PIs (III_c–f), which were synthesized by direct polymerization in m‐cresol, had inherent viscosities of 0.83–1.05 dL/g. These polymers could easily be dissolved in N,N′‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide (DMF), pyridine, m‐cresol, and dichloromethane. Whereas copolymerization was proceeded with equivalent molar ratios of pyromellitic dianhydride (PMDA)/6FDA, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA)/6FDA, or BTDA/SDPA, or ½ for PMDA/SDPA, copolyimides (co‐PIs), derived from 3 and mixed dianhydrides, were soluble in NMP. All the soluble PIs could form transparent, flexible, and tough films, and they showed amorphous characteristics. These films had tensile strengths of 88–111 MPa, elongations at break of 5–10% and initial moduli of 2.01–2.67 GPa. The glass transition temperatures of these polymers were in the range of 252–311°C. Except for III_e, the 10% weight loss temperatures (T_d) of PIs were above 500°C, and the amount of carbonized residues of the PIs at 800°C in nitrogen atmosphere were above 50%. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1681–1691, 1999     

Synthesis and properties of conjugated copolycondensates consisting of carbazole‐2,7‐diyl and fluorene‐2,7‐diyl

Carbazole and fluorene‐based random and alternating copolycondensates were synthesized to develop high‐performance blue light‐emitting polymers by improving electron injection ability of poly(N‐aryl‐2,7‐carbazole)s that showed intense blue electroluminescence (EL) with good hole‐injection and ‐transport ability. These copolycondensates absorbed light energy at about λ_max = 390 nm in CHCl₃ and 400 nm in film state, and fluoresced at about λ_max = 417 nm in CHCl₃ and 430 nm in the thin film state. Energy gaps between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of them were about 2.9 eV, and the energy levels of LUMO situated lower than that of corresponding polycarbazole. Polymer light‐emitting diode devices having configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)/polymer/CsF/Al using the copolycondensates, poly(N‐arylcarbazole‐2,7‐diyl), and poly(9,9‐dialkylfluorene‐2,7‐diyl), emitted bluish EL at operating voltages lower than 7 V. The device embedded the random copolycondensate showed notably higher performance with maximum luminance of 31,200 cd m^?2 at 11.0 V, and the current efficiencies observed under operating voltages lower than 7 V were higher than those of the other devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Reaction of N‐(phenyl and methyl)‐C‐arylnitrones with DMAD in ionic liquid: Efficient synthesis of Δ4‐isoxazolines

Facile synthesis of N‐(methyl and phenyl)‐Δ⁴‐isoxazolines via the reaction of (Z)‐N‐(methyl and phenyl)‐C‐arylnitrones with dimethyl acethylenedicarboxylate, DMAD, in ionic liquid is described. (Z)‐N‐methyl‐C‐arylnitrones afforded the high yield of N‐methyl‐Δ⁴‐isoxazolines 4a , 4b , 4c , 4d , 4e in ionic liquid, [bmim]BF₄, at room temperature. However, the reaction of (Z)‐N‐phenyl‐C‐arylnitrones with DMAD afforded the mixtures of cis and trans isomers of related N‐phenyl‐Δ⁴‐isoxazolines ( 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i , 5j , 6a , 6b , 6c , 6d , 6e , 6f , 6g , 6h , 6i , 6j ) under these conditions. J. Heterocyclic Chem., (2012).     

Two‐Dimensional Boronate Ester Covalent Organic Framework Thin Films with Large Single Crystalline Domains for a Neuromorphic Memory Device

Despite the recent progress in the synthesis of crystalline boronate ester covalent organic frameworks (BECOFs) in powder and thin‐film through solvothermal method and on‐solid‐surface synthesis, respectively, their applications in electronics, remain less explored due to the challenges in thin‐film processability and device integration associated with the control of film thickness, layer orientation, stability and crystallinity. Moreover, although the crystalline domain sizes of the powder samples can reach micrometer scale (up to ≈1.5 μm), the reported thin‐film samples have so far rather small crystalline domains up to 100 nm. Here we demonstrate a general and efficient synthesis of crystalline two‐dimensional (2D) BECOF films composed of porphyrin macrocycles and phenyl or naphthyl linkers (named as 2D BECOF‐PP or 2D BECOF‐PN ) by employing a surfactant‐monolayer‐assisted interfacial synthesis (SMAIS) on the water surface. The achieved 2D BECOF‐PP is featured as free‐standing thin film with large single‐crystalline domains up to ≈60 μm² and tunable thickness from 6 to 16 nm. A hybrid memory device composed of 2D BECOF‐PP film on silicon nanowire‐based field‐effect transistor is demonstrated as a bio‐inspired system to mimic neuronal synapses, displaying a learning–erasing–forgetting memory process.     

Synthesis,one‐ and two‐photon properties of poly[9,10‐bis(3,4‐bis(2‐ethylhexyl‐oxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐/2,7‐carbazolevinylene]

The synthesis, one‐ and two‐photon absorption (TPA) and emission properties of two novel 2,6‐anthracenevinylene‐based copolymers, poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐carbazolevinyl‐ene] ( P1 ) and poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinyl‐ene‐alt‐N‐octyl‐2,7‐carbazolevinylene] ( P2 ) were reported. The as‐synthesized polymers have the number‐average molecular weights of 1.56 × 10⁴ for P1 and 1.85 × 10⁴ g mol^?1 for P2 and are readily soluble in common organic solvents. They emit strong bluish‐green one‐ and two‐photon excitation fluorescence in dilute toluene solution (? _P1 = 0.85, ? _P2 = 0.78, λ_em( P1 ) = 491 nm, λ_em( P2 ) = 483 nm). The maximal TPA cross‐sections of P1 and P2 measured by the two‐photon‐induced fluorescence method using femtosecond laser pulses in toluene are 840 and 490 GM per repeating unit, respectively, which are obviously larger than that (210 GM) of poly[9,10‐bis‐(3,4‐bis(2‐ethylhexyloxy) phenyl)‐2,6‐anthracenevinylene], indicating that the poly(2,6‐anthracenevinylene) derivatives with large TPA cross‐sections can be obtained by inserting electron‐donating moieties into the polymer backbone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 463–470, 2010