Deep‐red light‐emitting phosphorescent dendrimer encapsulated tris‐[2‐benzo[b]thiophen‐2‐yl‐pyridyl] iridium (III) core for light‐emitting device applications

New deep‐red light‐emitting phosphorescent dendrimers with hole‐transporting carbazole dendrons were synthesized by reacting tris(2‐benzo[b]thiophen‐2‐yl‐pyridyl) iridium (III) complex with carbazolyl dendrons by DCC‐catalyzed esterification. The resulting first‐, second‐, and third‐generation dendrimers were found to be highly efficient as solution‐processable emitting materials and for use in host‐free electrophosphorescent light‐emitting diodes. We fabricated a host‐free dendrimer EL device with configuration ITO/PEDOT:PSS (40 nm)/dendrimer (55 nm)/BCP (10 nm)/Alq₃ (40 nm)/LiF (1 nm)/Al (100 nm) and characterized the device performance. The multilayered devices showed luminance of 561 cd/m² at 383.4 mA/cm² (12 V) for 15 , 1302 cd/m² at 321.3 mA/cm² (14 V) for 16 , and 422 cd/m² at 94.4 mA/cm² (18 V) for 17 . The third‐generation dendrimer, 17 (η_ext = 6.12% at 7.5 V), showed the highest external quantum efficiency (EQE) with an increase in the density of the light‐harvesting carbazole dendron. Three dendrimers exhibited considerably pure deep‐red emission with CIE 1931 (Commission International de L'Eclairage) chromaticity coordinates of x = 0.70, y = 0.30. The CIE coordinates remained very stable with the current density. The integration of rigid hole‐transporting dendrons and phosphorescent complexes provides a new route to design highly efficient solution‐processable materials for dendrimer light‐emitting diode (DLED) applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7517–7533, 2008     

Synthesis of poly(ester‐amide) dendrimers based on 2,2‐Bis(hydroxymethyl) propanoic acid and glycine

Water‐soluble, biodegradable, and biocompatible poly(ester‐amide) dendrimers with hydroxyl functional groups are synthesized from previously prepared AB₂ adduct of 2,2‐bis(hydroxymethyl) propanoic acid (bis‐MPA) and glycine as a repeating unit. Two esterification procedures using different coupling reagent/catalyst systems (DCC/DPTS or EDC/DMAP) are studied with respect to efficiency, ease of products purification, and quality of the final products. Both procedures have their own benefits and drawbacks, depending on dendrimer generation. The synthesized poly(ester‐amide) dendrimers as well as commercially available bis‐MPA dendrimers, poly(ester‐amide) hyperbranched polymer, and poly(vinyl alcohol) are used for preparation of solid dispersions of sulfonylurea antidiabetic drug glimepiride to improve its poor water‐solubility. In vitro dissolution studies show in comparison with pure glimepiride in crystalline or amorphous form, to the same extent improved glimepiride solubility for solid dispersions based on dendritic polymers, but not for poly(vinyl alcohol). The amount of glimepiride complexed with both dendrimer types increases with dendrimer generation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3292–3301     

Photoresponsive nanocarriers based on PAMAM dendrimers with a o‐nitrobenzyl shell

Gn (n = 3, 4, and 5) poly(amidoamine) (PAMAM) dendrimers were synthesized and peripherally modified with photocleavable o‐nitrobenzyl (NB) groups by reacting o‐nitrobenzaldehyde with the terminal amine groups of PAMAM dendrimers, followed by reducing the imine to amine groups with NaBH₄. The NB‐modified dendrimers, Gn‐NB (n = 3, 4, and 5), were characterized by nuclear magnetic resonance and fourier transform infrared spectroscopy. The results showed that the NB groups were successfully attached on the periphery of the dendrimers with near 100% grafting efficiency. Such a photosensitive NB shell could be cut off on irradiation with 365 nm ultraviolet (UV) light. The encapsulation and release of guest molecules, that is, salicylic acid (SA) and adriamycin (ADR), by Gn‐NB were explored. The encapsulation capability of these dendrimers was found to increase as the guest molecular size was decreased and have dependence on the generation of dendrimers as well. For both of SA and ADR, the average encapsulation numbers per dendrimer decreased in the order of G4‐NB > G5‐NB > G3‐NB, indicating that the fourth generation dendrimer was a better container for the guest molecules. The rate of SA release was found to be greater with UV irradiation than that without, suggesting that the NB‐shelled PAMMAM dendrimers could function as a molecular container/box with photoresponsive characteristics. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 551–557, 2010     

Dendritic Molecular Electrochromic Batteries Based on Redox‐Robust Metallocenes

In this Concept article, we summarize and discuss recent reports on dendritic molecular electrochromic batteries. Giant dendrimers containing 3ⁿ⁺² terminal tethers (n=generation number) and terminated by first‐raw late‐transition‐metal metallocenes, permethyl metallocenes and other sandwich complexes were shown to be redox robust. Indeed, they can be oxidized and reduced without decomposition and exist under two stable oxidation states (Fe^III/II, Co^III/II). Thus, a pre‐determined number of electrons (up to 14 000) per dendrimer can be exchanged. Cyclic voltammetry showed a remarkable complete reversibility even up to 14 000 Fe and Co termini in metallodendrimers, indicating fast electron hoping among the redox sites and between dendrimers on a carbon surface covered by arylcarboxylate groups. The dendrimer sizes were measured by dynamic light scattering in solution and by AFM (subsequent to flattening in the condensed state also indicating that these metallodendrimers aggregate to form discrete nanoparticles of dendrimers, as atoms do). The metallodendrimer size varies considerably between the two redox forms due to tether extension of the cationic dendrimers upon oxidation, and a breathing mechanism was shown by atomic and electric force microscopy (AFM and EFM). When the redox potential is very negative, the reduced form is an electron‐reservoir system that can deliver a large number of electrons per dendrimer to various reducible substrates. These systems are thus potential dendritic molecular batteries with two different colors for the two redox forms (electrochromic behavior).     

Amperometric Detection and Quantification of 8‐Hydroxy‐2′‐deoxyguanosine (8‐OHdG) Using Dendrimer Modified Electrodes

8‐Hydroxy‐2′‐deoxyguanosine (8‐OHdG) detection by high performance liquid chromatography (HPLC) with amperometric detection was studied using a Au electrode modified with different dendrimer based thin films. Gold electrode is thiol‐modified, forming self‐assembled monolayers on which different generation PAMAM dendrimers with terminal functional groups ? COOH and ? NH₂ have been attached using peptidic bonds. Results obtained in synthetic samples show low limits of detection and quantification for 8‐OHdG (1.2×10^?9 and 3.7×10^?9 M respectively), with matrix interference elimination, thus avoiding sample pretreatment. Best results are obtained with electrodes modified with aliphatic amino thiols and 3.5 and 4.5 generation carboxylated dendrimers (Au/AET/DG^3.5 and Au/AET/DG^4.5), demonstrating that these materials constitute a good alternative for 8‐OHdG determination in biological fluids.     

A Systematic Study of Peripherally Multiple Aromatic Ester‐Functionalized Poly(benzyl ether) Dendrons for the Fabrication of Organogels: Structure–Property Relationships and Thixotropic Property

A new class of peripherally multiple aromatic ester‐functionalized poly(benzyl ether) dendrons and/or dendrimers with different focal point substituents, surface groups, interior structures, as well as different generations have been synthesized and their structure–property relationships with respect to their gelation ability have been investigated systematically. Most of these dendrons are able to gel organic solvents over a wide polarity range. Evident dendritic effects were observed not only in gelation capability but also in thermotropic, morphological, and rheological characterizations. It was disclosed that subtle changes in peripheral ester functionalities and interior dendritic structures affected the gelation behavior of the dendrons significantly. Among all the dendrons studied, the second‐ and third‐generation dendrons G₀G₂‐Me and G₀G₃‐Me with dimethyl isophthalates (DMIP) as peripheral groups exhibited the best capability in gelation, and stable gels were formed in more than 22 aromatic and polar organic solvents. The lowest critical gelation concentration (CGC) reached 2.0 mg mL^?1, indicating that approximately 1.35×10⁴ solvent molecules could be entrapped by one dendritic molecule. Further study on driving forces in gel formation was carried out by using a combination of single‐crystal/powder X‐ray diffraction (XRD) analysis and concentration‐dependent (CD)/temperature‐dependent (TD) ¹H NMR spectroscopy. The results obtained from these experiments revealed that the multiple π–π stacking of extended π‐systems due to the peripheral DMIP rings, cooperatively assisted by non‐conventional hydrogen‐bonding, is the key contributor in the formation of the highly ordered supramolecular and fibrillar network. In addition, these dendritic organogels exhibited unexpected thixotropic‐responsive properties, which make them promising candidates with potential applications in the field of intelligent soft materials.     

Coordination‐Driven Self‐Assembly of Carbazole‐Based Metallodendrimers with Generation‐Dependent Aggregation‐Induced Emission Behavior

A new family of 120° carbazole‐based dendritic donors D1 – D3 have been successfully designed and synthesized, from which a series of novel supramolecular carbazole‐based metallodendrimers with well‐defined shapes and sizes were successfully prepared by [2+2] and [3+3] coordination‐driven self‐assembly. The structures of newly designed rhomboidal and hexagonal metallodendrimers were characterized by multinuclear NMR (¹H and ³¹P) spectroscopy, ESI‐TOF mass spectrometry, FTIR spectroscopy, and the PM6 semiempirical molecular orbital method. The fluorescence emission behavior of ligands D1 – D3 , rhomboidal metallodendrimers R1 – R3 , and hexagonal metallodendrimers H1 – H3 in mixtures of dichloromethane and n‐hexane with different n‐hexane fractions were investigated. The results indicated that D1 – D3 featured typical aggregation‐induced emission (AIE) properties. However, different from ligands D1 – D3 , metallodendrimers R1 – R3 and H1 – H3 presented interesting generation‐dependent AIE properties. Furthermore, evidence for the aggregation of these metallodendrimers was confirmed by a detailed investigation of dynamic light‐scattering, Tyndall effect, and SEM. This research not only provides a highly efficient strategy for constructing carbazole‐based dendrimers with well‐defined shapes and sizes, but also presents a new family of carbazole‐based dendritic ligands and rhomboidal and hexagonal metallodendrimers with interesting AIE properties.     

Sugar‐Decorated Dendritic Nanocarriers: Encapsulation and Release of the Octahedral Rhenium Cluster Complex [Re6S8(OH)6]4−

The encapsulation of a nanometer‐sized octahedral anionic rhenium cluster complex with six terminal hydroxo ligands [Re₆S₈(OH)₆]^4? in maltose‐decorated poly(propylene amine) dendrimers (POPAM, generation 4 and 5) has been investigated. Ultrafiltration experiments showed that maximal loading capacity of the dendrimers with the cluster complex is achieved after about ten hours in aqueous solution. To study the inclusion phenomena, three different methods have been applied: UV/Vis, time‐resolved laser‐induced fluorescence spectroscopy (TRLFS), and laser‐induced liquid bead ion desorption mass spectrometry (LILBID‐MS). From the results obtained, it could be concluded that: a) the hydrolytic stability of the rhenium cluster complex is significantly enhanced in the presence of dendritic hosts; b) the cluster anions are preferentially bound inside the dendrimers; c) the number of cluster complexes encapsulated in the dendrimers increases with rising dendrimer generation. On average, four to five cluster anions can preferentially be captured in the interior of sugar‐coated dendritic carriers. An asymptotic progression of the release of cluster complexes from the loaded dendrimers was observed under physiologically relevant conditions (isotonic sodium chloride solution: approximately 93 % within 4 days for loaded POPAM‐G4‐maltose; approximately 86 % within 4 days for loaded POPAM‐G5‐maltose). These encapsulation and release properties of maltose‐decorated nanocarriers imply the possibility for the development of the next generation of dendritic nanocarriers with specific targeting of destined tissue for therapeutic treatments.     

Ester‐ and amide‐terminated dendrimers with alternating amide and ether generations

Ester‐terminated polyamide dendrimers up to the third generation and amide‐terminated polyamide dendrimers of the first generation were synthesized by convergent growth. The Williamson ether synthesis and diphenylphosphoryl azide (DPPA) coupling of amines to carboxylic acids were used for the construction of the dendrimers, having alternate ether and amide generations. The methyl ester‐ and N,N‐diethylamide‐terminated dendrimers were readily soluble in common organic solvents while the N‐methylamide‐ and N‐benzylamide‐terminated dendrimers were soluble only in DMF and DMSO. Both the end and internal amide groups of the N,N‐diethylamide‐terminated dendrimer were reduced by LiAlH₄ to form a polyamine dendrimer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1533–1543, 2000     

Dendritic Iron Porphyrins with a Tethered Axial Ligand as New Model Compounds for Heme Monooxygenases

The novel iron(III) porphyrin dendrimers of generation zero ([ 1 ⋅Fe^III]Cl), one ([ 2 ⋅Fe^III]Cl), and two ([ 3 ⋅Fe^III]Cl) (Fig. 1) were prepared (Schemes 1 and 3) as models of heme monooxygenases. They feature controlled axial ligation at the Fe center by one imidazole tethered to the porphyrin core and possess a vacant coordination site available for ligand binding and catalysis. The high purity of the dendrimers and the absence of structural defects was demonstrated by matrix‐assisted laser‐desorption‐ionization time‐of‐flight (MALDI‐TOF) mass spectrometry (Fig. 3). The electronic properties of the Fe^III porphyrin dendrimers and comparison compounds [ 4 ⋅Fe^III]Cl and [ 12 ⋅Fe^III(1,2‐Me₂Im)]Cl (1,2‐Me₂Im=1,2‐dimethylimidazole) were investigated by UV/VIS and EPR (electronic paramagnetic resonance) spectroscopy, as well as by measurements of the magnetic moments by the Evans‐Scheffold method. Epoxidation of olefins and oxidation of sulfides to sulfoxides, catalyzed by the new dendritic metalloporphyrins, were investigated in CH₂Cl₂ with iodosylbenzene as the oxidant (Tables 1 and 2). The total turnover numbers were found to increase with the size of the dendrimer, due to improved catalyst stability at higher dendritic generations (Figs. 4 and 5). The second‐generation complex [ 3 ⋅Fe^III]Cl was, therefore, the most efficient catalyst in the series, despite the fact that its active site is considerably hindered by the encapsulation inside the sterically demanding, fluctuating dendritic wedges. Very high product selectivities were observed in all oxidation reactions, regardless of dendrimer generation.     

Synthesis of Conjugated Polyphenylene Dendritic β-Diketones

An efficient synthesis of high generation conjugated polyphenylene dendrimer-based β-diketones was investi- gated using simple synthetic methods. The new dendrimer-based β-diketones were characterized by NMR, MS and elemental analysis. The UV-Vis and fluorescence spectra of these β-diketones in different solvents were investigated The photoluminescent （PL） quantum yield and TG and DSC curves were also investigated. A new intermediate, 1-bromo-3,5-diiodobenzene, was developed to synthesize high generation dendrimers with good yields.     

Synthesis,Redox Activity of Rigid Ferrocenyl Dendrimers,and Isolation of Robust Ferricinium and Class‐II Mixed‐Valence Dendrimers

The coupling reactions of ethynylferrocene with trihalogenoarenes do not lead to ethynylferrocenyl arenes that are soluble enough to form the basis of a suitable construction of stiff ferrocenylethynyl arene‐cored dendrimers, which explains the previous lack of reports on stiff ferrocenyl dendrimers. However, rigid ferrocenyl‐terminated dendrimers have been synthesized from 1,3,5‐tribromo‐ and triiodobenzene through Sonogashira and Negishi reactions with 1,2,3,4,5‐pentamethyl‐1′‐ethylnylferrocene ( 1 a ), according to 1→2 connectivity. With compound 1 a , the construction of a soluble dendrimer ( 10 a ) that contained 12 ethynylpentamethylferrocenyl termini was achieved. Stiff dendrimer 10 a shows a single, reversible cyclic voltammetry (CV) wave (with adsorption), which disfavors the hopping heterogeneous electron‐transfer mechanism that is postulated for redox‐terminated dendrimers that contain flexible tethers. The selectivity of these Sonogashira reactions allows the synthesis of an arene‐cored dendron ( 2 c ) that contains both ethynylferrocenyl and 1,2,3,4,5‐pentamethyl‐ferrocenylethynyl redox groups, thus leading to the construction of a dendrimer ( 7 c ) that contains both types of differently substituted ferrocenyl groups with two well‐separated reversible CV waves. Upon selective oxidation, this mixed dendrimer ( 7 c ) leads to a class‐II mixed‐valence dendrimer, 7 c [PF₆]₃, as shown by Mössbauer spectroscopy, whereas oxidation of the related fully pentamethylferrocenylated dendrimer ( 7 a ) leads to the all‐ferricinium dendrimer, 7 a [PF₆]₆.     

Size‐Tunable Micron‐Bubbles Based on Fluorous–Fluorous Interactions of Perfluorinated Dendritic Polyglycerols

This paper describes the behavior of various generations of polyglycerol dendrimers that contain a perfluorinated shell. The aggregation in organic solvents is based on supramolecular fluorous–fluorous interactions, which can be described by means of ¹⁹F NMR spectroscopy. In order to study the interaction and aggregation phenomena of dendrimers with perfluorinated shell and perfluoro‐tagged guest molecules we investigated [G3.5]‐dendrimer with a perfluorinated shell in the presence of perfluoro‐tagged disperse red. Noteworthy, the interaction intensities varied in an unexpected manner depending on the equivalents of perfluoro‐tagged guest molecules added to the dendrimers in solution which then formed supramolecular complexes based on fluorous–fluorous interactions. We found that these complexes aggregated around residual air in the solvent to form stable micron‐sized bubbles. Their sizes correlated with the interaction intensities measured for certain dendrimer–guest molecule ratios. Degassing of the solutions led to a quasi phase separation between organic and fluorous phase, whereby the dendrimers formed the fluorous phases. Regassing the sample with air afforded bubbles of the initial size again.     

Shape‐Persistent Oligothienylene–Ethynylene‐Based Dendrimers: Synthesis,Spectroscopy and Electrochemical Characterization

A series of novel structurally well‐defined oligothienylene–ethynylene‐based dendritic macromolecules up to the 3rd generation (G3) were successfully synthesized by a combination of Pd‐catalyzed Sonogashira‐type cross‐coupling and oxidative homocoupling steps. Oxidative homocoupling of dendrons successfully afforded dendrimers up to the 2nd generation (G2). In contrast, the G3 dendrimer was effectively prepared by a four‐fold Sonogashira‐type cross‐coupling reaction. All compounds showed broad and structureless absorption and emission spectra arising from the presence of different π‐conjugated chromophores. With increasing generation, a bathochromic shift of the π–π* absorption band and an increase of the absorption coefficient were observed. The insertion of ethynylene groups into the conjugated dendrimer backbone resulted in a hypsochromic shift compared to all‐thiophene dendrimers reported earlier by our group. All dendritic compounds are fluorescent and showed moderate quantum efficiencies due to an effective intramolecular charge‐transfer (ICT) process. Cyclic voltammetry measurements also revealed the presence of multiple π‐conjugative pathways that show very broad oxidation waves for higher generations. HOMO–LUMO energy levels of these dendrons and dendrimers were estimated from optical and redox measurements and the calculated band gaps were within the range of 3.3 to 2.4 eV, typical for oligo‐ and polythiophenes. Electrochemical polymerizations of several desilylated compounds were performed and characterization of the films is reported. Preliminary bulk heterojunction solar cells that utilise these ethynylated dendrimers as the donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM[60]) as the acceptor showed moderate efficiencies ranging from 0.18–0.64 %.     

New Liquid Crystalline Materials Based on Two Generations of Dendronised Cyclophosphazenes

A divergent approach was used for the synthesis of dendritic structures based on a cyclotriphosphazene core with 12 or 24 hydroxyl groups, by starting from [N₃P₃(OC₆H₄OH‐4)₆] and using an acetal‐protected 2,2‐di(hydroxymethyl)propionic anhydride as the acylating agent. Hydroxyl groups in these first‐ and second‐generation dendrimers, G1‐(OH)₁₂ or G2‐(OH)₂₄ , were then condensed in turn with mono‐ or polycatenar pro‐mesogenic acids to study their ability to promote self‐assembly into liquid crystalline structures. Reactions were monitored by using ³¹P{¹H} and ¹H NMR spectroscopy and the chemical structure of the resulting materials was confirmed by using different spectroscopic techniques and mass spectrometry (MALDI‐TOF MS). The results were in accordance with monodisperse, fully functionalised cyclotriphosphazene dendrimers. Thermal and liquid crystalline properties were studied by using optical microscopy, differential scanning calorimetry and X‐ray diffraction. The dendrimer with 12 4‐pentylbiphenyl mesogenic units gives rise to columnar rectangular organisation, whereas the one with 24 pentylbiphenyl units does not exhibit mesomorphic behaviour. In the case of materials that contain polycatenar pro‐mesogenic units with two aromatic rings ( A4 vs. A5 ), the incorporation of a short flexible spacer connected to the periphery of the dendron (acid A5 ) was needed to achieve mesomorphic organisation. In this case, both dendrimer generations G1 A5 and G2 A5 exhibit a hexagonal columnar mesophase.     

A MALDI‐TOF MS study of lanthanide(III)‐cored poly(phenylenevinylene) dendrimers

An extensive study by matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry (MS) of some first‐generation and second‐generation lanthanide(III)‐cored poly(phenylenevinylene) dendrimers is described. The complexes were obtained by self‐assembly of suitably functionalized carboxylate dendrons around the lanthanide ion (La³⁺, Er³⁺). Fourier transform infrared (FT‐IR) spectroscopy gave reasonable evidence for the proposed structures. However, MS was used to ascertain unequivocally the complex formation. The most reliable results were found in the negative reflector mode, using 2‐[(2E)‐3‐(4‐tert‐butylphenyl)‐2‐methylprop‐2‐enylidene]malononitrile (DCTB) as matrix. Well‐defined and highly resolved base peaks corresponding to negative ions of [Gn₄La]^? and [Gn₄Er]^? were found in all cases, with an excellent match between the theoretical and observed isotope distributions. However, the 3 : 1 stoichiometry used in the synthesis guarantees an empirical formula Gn₃Ln for the complexes. Copyright © 2008 John Wiley & Sons, Ltd.     

Poly(aryl ether) Dendrons with Monopyrrolotetrathiafulvalene Unit‐Based Organogels exhibiting Gel‐Induced Enhanced Emission (GIEE)

A series of poly(aryl ether) dendrons with a monopyrrolo‐tetrathiafulvalene unit linked through an acyl hydrazone linkage were designed and synthesized as low molecular mass organogelators (LMOGs). Two of the dendrons could gelate the aromatic solvents and some solvent mixtures, but the others could not gel all solvents tested except for n‐pentanol. A subtle change on the molecular structure produces a great influence on the gelation behavior. Note that the dendrons could form the stable gel in the DMSO/water mixture without thermal treatment and could also form the binary gel with fullerene (C₆₀) in toluene. The formed gels undergo a reversible gel–sol phase transition upon exposure to external stimuli, such as temperature and chemical oxidation/reduction. A number of experiments (SEM, FTIR spectroscopy, ¹H NMR spectroscopy, and UV/Vis absorption spectroscopy, and XRD) revealed that these dendritic molecules self‐assembled into elastically interpenetrating one‐dimensional fibrillar aggregates and maintain rectangular molecular‐packing mode in organogels. The hydrogen bonding, π–π, and donor–acceptor interactions were found to be the main driving forces for formation of the gels. Moreover, the gel system exhibited gel‐induced enhanced emission (GIEE) property in the visible region in spite of the absence of a conventional fluorophore unit and the fluorescence was effectively quenched by introduction of C₆₀.     

Syntheses and nickel coordination properties of cyclen substituted with mixed stilbene/poly(ethylene glycol) dendritic arms

We synthesized a series of cyclens substituted with mixed stilbene and poly(ethylene glycol) dendritic arms. All dendrimers terminated with different peripheral groups had good solubility in common organic solvents, and dendrimers terminated with ? CO₂H groups (CO₂H‐dendrimers) were also soluble in alkaline solutions. The nickel coordination properties of these dendrimers were investigated in organic solvents. Dendrimers terminated with ? CN groups (CN‐dendrimers) and the second‐generation CO₂H‐dendrimer [(CO₂H)₈L2] could produce pentacoordinated nickel complexes; the third‐generation CO₂H‐dendrimer [(CO₂H)₁₆L3] could form tetra‐ and pentacoordinated nickel complexes, and the nickel complex of the fourth‐generation CO₂H‐dendrimer [(CO₂H)₃₂L4] could not be obtained. This result was due to the fact that the globular surface of (CO₂H)₁₆L3 formed a hydrogen‐bond network that selectively penetrated cations and inhibited the access of anions to the core. The formation of the hydrogen‐bond network was confirmed by Fourier transform infrared, ¹H NMR, and fluorescence data. The CN‐dendrimers could not form hydrogen bonds on the surface, and the first‐ and second‐generation CO₂H‐dendrimers could not form intramolecular hydrogen‐bond networks. Therefore, they had no selectivity for positive nickel ions and negative chloride ions. (CO₂H)₃₂L4 could not produce a nickel complex because it had a crammed backbone structure that could not penetrate nickel and chloride ions. Therefore, it was possible to control the ion access of cations and anions with the hydrogen‐bond network of (CO₂H)₁₆L3. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5414–5428, 2005     

Ionic networks derived from the protonation of dendritic amines with carboxylic acid end‐functionalized PEGs

The synthesis and characterization of novel ionic networks linked by the ammonium salts of poly(propylene imine) (PPI) dendrimers of the first (PPI G1) and second (PPI G2) generation and two short bis carboxymethyl ether terminated poly(ethylene glycol)s (DiCOOH‐PEG) with different molecular weights (M_n ～ 250 and M_n ～ 600) are reported. Likewise, an ionic network based on PPI G1 and a long αω‐dicarboxylic acid functionalized PEG (M_n ～ 4800) were evaluated. Simpler ionic structures based on tris(2‐aminoethyl)amine or hexamethylene diamine and the short DiCOOH‐PEGs are also investigated. The ionic structures formed were confirmed by differential scanning calorimetry, Fourier Transform Infrared spectroscopy in the attenuated‐total‐reflection mode, and ¹H‐¹³C NMR spectroscopy. A comprehensive ¹H NMR analysis revealed that only the primary amines of the PPI G1 dendrimer residing at the periphery take part in the ionic network formation. In the case of PPI G2, the picture is less clear. A thorough investigation of the thermal degradation of the utilized precursors and all the ionic materials prepared was additionally performed by thermogravimetric analysis. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Connector type‐controlled mesophase structures in poly(propyl ether imine) dendritic liquid crystals of identical dendrimer generations

Poly(propyl ether imine) (PETIM) dendrimers of one to three generations are used as dendritic cores to identify the influence of varying connector types that connect the dendritic core with peripheral mesogens on the emerging liquid crystalline (LC) properties. The LC properties vary in these dendritic liquid crystals, even when the dendrimer generations and thus the number of peripheral mesogenic moieties remain identical. PETIM dendrimer generations one to three, ester and amide connectors varying with succinates, phthalates, and succinamides, are studied herein. Cholesteryl moieties are installed at the peripheries through the above connectors to induce mesogenic properties. These modified dendritic liquid crystals reveal a layered mesophase structure in most ester and amide connector‐derivatives, whereas a third‐generation phthalate ester dendrimer favors a rectangular columnar mesophase structure. A transition from layered to a rectangular columnar structure results by a mere change in the connector varying between a succinate or succinamide or phthalate, within one particular dendrimer generation and without altering the underlying dendrimer core or the number of mesogenic moieties. The study demonstrates that in dendritic liquid crystals with essentially identical chemical constitutions, a change in the connector type connecting the mesogen with the dendrimer core is sufficient to change the mesophase structures. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3665–3678