Electrochemical Study of 4-Nitrophenol at a Modified Carbon Paste Electrode

 A zeolite-modified carbon paste electrode (CPE) has been used for the determination of 4-nitrophenol by differential pulse voltammetry (DPV). The electrochemical reduction of 4-nitrophenol at −1.0 V is carried out in a Britton-Robinson medium at pH 3.5. The cyclic voltammetric (CV) behaviour has been investigated to study the nature of the process. Studies on the effect of pH were carried out over the pH range 2–9 with the Britton-Robinson buffer solution, and the influence of pH on peak height and peak potential was analyzed. A linear relationship between peak intensity and concentration is obtained in the range 0.2–10 mg L⁻¹, with a detection limit of 0.04 mg L⁻¹; a relative standard deviation of 1.5% for a 5 mg L⁻¹ 4-nitrophenol concentration and a relative error of 2.6% were also obtained (n=11). Received March 3, 1998. Revision December 10, 1998.     

Polarographic study of a benzodiazepinooxazole: Cloxazolam

Summary The polarographic behaviour of 10-chloro-11b-(2-chlorophenyl)-2,3,7,11b-tetrahydrooxazolo[3,2-d][1,4]-benzodiazipine-6(5H)-one (cloxazolam) was studied in the pH range 1–12. Cloxazolam suffers a hydrolysis process, which can be followed by polarography. The reduction processes of cloxazolam and its hydrolysis product are irreversible and their currents are diffusion-controlled. Two polarographic methods have been developed upon the basis of the reduction of both the protonated iminium form (pH 1.45, measurement time: 10 min) and the benzophenone produced in the hydrolysis process (pH 11.75, measurement time: 15 min). The relationship between reduction peak current and concentration is linear up to at least 5.72×10^–5 mol/l for both methods. A higher sensitivity was obtained for the method based on the benzophenone reduction (detection limit 5.72×10^–8 mol/l; 20 ppb). The methods developed were applied to the determination of cloxazolam in its pharmaceutical formulations (Betavel, 1 mg). The method in alkaline medium was the most adequate for the determination of the compound in tablets, with errors lower than 1%.

---

Polarographische Untersuchung eines Benzodiazepinoxazols: Cloxazolam

     

Electrochemistry of the interaction of furazolidone and bovine serum albumin

The electrochemical behavior of the interaction of furazolidone (Fu) with bovine serum albumin (BSA) was investigated by cyclic voltammetry and differential pulse voltammetry at a glassy carbon electrode. Fu shows an irreversible reduction at − 0.34 V in pH 4.0 Britton–Robinson buffer (B–R) buffer–10% DMF solution. After the addition of BSA into the Fu solution, the reductive peak currents decreased without any significant shift of the peak potential and the appearance of new peaks. The electrochemical parameters of the interaction system were calculated in the absence and presence of BSA. This electrochemical method was further applied to the determination of BSA samples and the results were in good agreement with the traditional cellulose acetate electrophoresis. The linear dynamic range was between 10.0 and 80.0 mg l^− 1. The detection limit was 7.6 mg l^− 1 and the recoveries were obtained from 97.0% to 104.0%.     

Determination of acipimox in capsules by differential pulse polarography

A differential pulse polarographic (DPP) method has been developed for the determination of acipimox in its pharmaceutical formulations. Using Sörensen buffer pH 6.0 as supporting electrolyte a single, irreversible peak occurred at –0.79 V vs an Ag/AgCl reference electrode. The peak height vs concentration plot was found to be linear over the range of 10^–6 to 6 × 10^–4 mol/l. The detection limit is 60ng/ml. The analysis of a series of 10 Olbetam® 250 mg capsules showed an overall standard deviation of ± 4.18 mg and a S_rel of ± 1.66%, respectively.     

Polarographic study of a benzodiazepinooxazole: Oxazolam

Summary The polarographic behaviour of 10-chloro-2,3, 7,11b-tetrahydro-2-methyl-11b-phenyloxazolo-[3,2-d][1,4]-benzodiazepin-6(5H)-one (Oxazolam) was studied in the pH range 1–12. The reduction processes of Oxazolam and its hydrolysis product are irreversible and their currents are predominantly diffusion-controlled. The linear relationship between current and Oxazolam concentration in sulphuric acid medium permits its polarographic determination up to 6.08×10^–5 mol/l. The detection limit was 1.52×10^–7 mol/l (50 ppb). The reproducibility of the method in terms of relative standard deviation was 1.74% and 1.85% for ten determinations at 1.48×10^–5 mol/l and 1.37×10^–6 mol/l levels, respectively. The method developed was applied to the determination of the compound in its formulations, Hializan-10 mg, obtaining errors lower than 2%.

---

Polarographische Untersuchung eines Benzodiazepinoxazols: Oxazolam

     

A gas-jet system for the study of short-lived,light fission products

A selective method for the solvent extraction and spectrophotometric determination of uranium(VI) is described. Uranium can be extracted into chloroform at pH 6.0 with N-m-chlorophenyl-2-theno-hydroxamic acid (N-m-CPTHA) and determined by spectrophotometry using 1-(2-pyridylazo)-2-naphthol (PAN). The molar absorptivity is 1.50·10⁴ 1·mol^–1·cm^–1 at 560 nm. The system obeys Beer's law within the range 0.95–20.00 ppm of uranium. Alternatively, a back-extraction procedure was also developed in which uranium is back-extracted by nitric acid and estimated spectrophotometrically using Arsenazo III. The molar absorptivity is 2.0·10⁴ 1·mol^–1·cm^–1 at 665 nm. The parameters concerning the optimum conditions for the analytical method are discussed. The proposed method is applied precisely for the determination of uranium in rock and sea water samples.     

Accumulation voltammetry of copper(II) at carbon-paste electrode containing salicylideneamino-2-thiophenol

Summary Accumulation voltammetry of copper(II) was investigated with a carbon-paste electrode containing salicylideneamino-2-thiophenol(SATP). Copper(II) was accumulated as the copper(II)-SATP complex on the electrode without an applied potential by immersing the electrode in 0.01 mol/l acetate buffer (pH 3.8) containing copper(II). The reduction peak of the copper(II)-SATP complex was observed at –0.12 V (vs. SCE) in 0.01 mol/l acetate buffer (pH 3.8) by scanning the potential in a negative direction. The calibration curve for copper(II) was linear in the range of 2×10^–9–1×10^–7 mol/l. Since the accumulation of copper(II) is based on a chemical reaction between copper(II) and SATP, copper(II) was selectively accumulated on the electrode. The presented method was applied to the determination of copper(II) in standard reference materials prepared by the National Institute for Environmental Studies.     

阳离子表面活性剂对电化学法测试牛奶中氯霉素残留量的影响

为探索用电化学方法检测生物样品中氯霉素残留的高灵敏度技术,本实验研究了阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)对氯霉素在玻碳电极上伏安行为的影响,实验结果表明,以0.02 mol/L高氯酸为支持电解质,在0.40~-0.60 V的范围内进行伏安扫描时,2×10-5mol/L CTMAB能显著提高氯霉素在-0.41 V处的还原峰电流。利用这种改进的电化学方法检测氯霉素的线性范围为0.0026~8 mg/L,检出限达到0.83μg/L。研究了缓冲液种类及其酸碱度及其它表面离子活性剂等对测试氯霉素的影响。     

Spectrophotometric and atomic absorption determination of Ni(II) in fresh and sea waters after preconcentration by flotation

A highly selective and sensitive procedure for flotation separation followed by spectrophotometric determination, confirmed by AAS, of Ni(II) traces is proposed. The maximum flotation separation (100%) is achieved at 25° C in the pH range of 1–3 using sodium diethyldithiocarbamate (as a collector) and oleic acid surfactant. The floated (1 : 2) colored complex is measured spectrophotometrically at 430 nm over a concentration range of 0.5–4.0 g/g with a molar absorptivity of 0.44 × 10⁴ L mol^–1 cm^–1. The procedure was successfully applied for the separation and determination of Ni(II) in fresh and sea waters.     

Determination of 2-amino-5-nitrothiazole by square-wave cathodic stripping voltammetry

An electrochemical method has been developed for the detection and determination of 2-amino-5-nitrothiazole (2,5-ANT) by adsorption square-wave voltammetric stripping. The best sensitivity/resolution ratio was obtained by adsorption at pH 8.0 using a phosphate buffer, an accumulation potential of –10 mV (vs. Ag/AgCl 3 mol/l) and an accumulation time of 15 s. Under these conditions, the proposed method provides a linear electrode response over the 2,5-ANT concentration range 5–300 ng ml^–1, and a detection and determination limit of 4 and 7.5 ng ml^–1, respectively. The method was applied to the determination of 2,5-ANT in bacon.     

Electroanalytical study of a benzodiazepinooxazole: Mexazolam

Summary The electroanalytical behaviour of 10-chloro-11b-(2-chlorophenyl)-2,3,7,11b-tetrahydrooxazolo[3,2-d][1,4]-benzodiazepin-6(5H)-one (Mexazolam) was studied in the pH-range 1–13. The compound suffers a hydrolysis process, which can be followed by voltammetric techniques. The reduction process of Mexazolam is irreversible in the whole pH range 1–13 studied; the cathodic reactions of its hydrolysis products are irreversible at pH values lower than 7 and reversible in neutral and alkaline media at a scan rate range of 0.1–40 V·s^–1. The electrode process attributed to the reduction of the carbonyl group is predominantly adsorption-controlled and the reduction of the iminium group of the different species of Mexazolam is diffusion-controlled. A differential pulse polarographic method has been developed upon the basis of the reduction of the protonated iminium form. The relationship between reduction peak current and concentration is linear up to at least 13 ppm. The reproducibility of the method in terms of relative standard deviation (RSD) was smaller than 1.6% for ten determinations, at a concentration level of 5.51×10^–6 and 2.62×10^–5 mol/l. A determination limit of 80 ppb was obtained.     

Voltammetric study of glibenclamide at carbon paste and Sephadex-modified carbon paste electrodes

The oxidative behaviour of the antidiabetic agent glibenclamide on a bare carbon paste electrode (CPE) and a Sephadex-modified carbon paste electrode (SMCPE) was explored by cyclic and differential pulse voltammetry (DPV). The analysis procedure consisted of an open circuit accumulation step in stirred sample solution of Britton-Robinson buffer (0.04 mol L^–1, pH 2.0). This was followed by medium exchange to a clean solution of Britton-Robinson buffer (0.04 mol L^–1, pH 5.0), and subsequently an anodic potential scan was effected to obtain the voltammetric peak. The glibenclamide oxidation peak current obtained by DPV was proportional to the concentration of the glibenclamide in the range of 1.0×10^–9 mol L^–1 to 5.0×10^–8 mol L^–1 for 180 s accumulation time, with a detection limit of 4.0×10^–10 mol L^–1. A method was developed for the determination of glibenclamide in formulation and spiked human serum. Moreover, the proposed procedure was used to estimate the serum concentrations after oral administration of a 5 mg tablet of glibenclamide to three diabetic subjects.     

Indirect determination of chloride and sulfate ions in alcohol fuel by capillary electrophoresis

A capillary zone electrophoresis method using indirect UV detection for the analysis of chloride and sulfate in alcohol fuel samples was developed. The anions were analyzed in less than 3 min using an electrolyte containing 10 mmol l^–1 chromate and 0.75 mmol l^–1 hexamethonium bromide (HMB) as electroosmotic flow modifier. Coefficients of variation were better than 0.6% for migration time (n=10) and between 2.05 and 2.82% for peak area repeatabilities. Analytical curves of peak area versus concentration in the range of 0.065–0.65 mg kg^–1 for chloride and 0.25–4.0 mg kg^–1 for sulfate were linear with coefficients of correlation higher than 0.9996. The limits of detection for sulfate and chloride were 0.033 and 0.041 mg kg^–1, respectively. Recovery values ranged from 85 to 103%. The method was successfully applied for the quantification of sulfate and chloride in five alcohol fuel samples. The concentration of sulfate varied from 0.45 to 3.12 mg kg^–1. Chloride concentrations were below the methods LOD.     

Determination of Selenium(IV) by Stripping Voltammetry at a Mercury-Film Electrode

A procedure was proposed for the determination of selenium(IV) by stripping voltammetry on a mercury-film electrode at an electrolysis potential of +0.4 V versus the saturated silver–silver chloride reference electrode in a 1 M H₂SO₄ solution. The current of the cathodic peak is a linear function of the selenium(IV) concentration in the range from 5 × 10^–3 to 3 × 10^–1 mg/L (6.3 × 10^–8 to 3.8 × 10^–6 M) at a time of electrolysis of 30 s (t _el). The detection limit for selenium is 1 × 10^–4 mg/L (1.3 × 10^–9 M) at t _el = 300 s. It was shown that selenium(IV) can be determined in the presence of 10 mg/L Zn(II), 1 mg/L Cd(II), 0.5 mg/L Pb(II), and 0.2 mg/L Cu(II). A procedure for the determination of selenium in natural, mineral, and potable water was proposed.     

Electrochemical Behavior and Determination of Uric Acid at Single-Walled Carbon Nanotube Modified Gold Electrodes

The voltammetric behavior of uric acid was studied at a single-walled carbon nanotube (SWNT) modified gold electrode. Uric acid can effectively accumulate at this electrode and produce an anodic peak at about 0.45 V (vs. SCE) in pH 5.0 sodium acetate buffer solutions (HAc-NaAc). The experimental parameters, such as solution pH, accumulation time, and amount of SWNT, were optimized for determination. Under the optimum conditions, the anodic peak current is linear to the uric acid concentration over the range of 1.0×10⁻⁷ M to 2.5×10⁻⁵ M with a correlation coefficient of 0.998. The detection limit was 5.0×10⁻⁸ M for 60 s accumulation. The electrode could be easily regenerated and exhibited good stability. A 5.0×10⁻⁶ M uric acid solution was measured ten times using the same electrode, and the relative standard deviation of the peak current was 1.3%. This method was successfully applied to the determination of uric acid in human urine samples, and the recovery was 97–99%. The feasibility for simultaneous determination of xanthine, ascorbic acid and uric acid was discussed. These species did not interfere with each other in a certain concentration range. The influence of some surfactants on the anodic peak was also examined.     

Adsorptive stripping voltammetric determination of dimenhydrinate at a hanging mercury drop electrode

Dimenhydrinate exhibits a single adsorptive stripping peak at a hanging mercury drop electrode after accumulation at 0.0V vs Ag/AgCl electrode at pH 3.8 (acetate buffer). The addition of trace amounts of copper ions enhanced the dimenhydrinate peak and its height depends on the concentration of each dimenhydrinate and Cu²⁺. The adsorptive stripping response was evaluated with respect to accumulation time and potential, concentration dependence, electrolyte, the presence of other purines, surfactants and other metal ions, and some variables. The calibration graph for dimenhydrinate determination is linear over the range 2.0×10^–8–2.0×10^–7 M (pre-concentration for 60s). The correlation factor is found to be 0.985 and RSD is 3.2% at 1.0×10^–7 M. Detection limit is 1.0×10^–8 M after 5 min accumulation. The determination of dimenhydrinate in pharmaceutical formulations by the proposed method is also reported.     

Studies on the voltammetric behaviour of salicyl fluorone and gallium-salicyl fluorone complex

In the NH₄Cl supporting electrolyte, within the pH range from 1 to 5, an irreversible adsorptive reducing wave of salicyl fluorone(SAF) was obtained. The electrode process was verified as follow: On the surface of mercury electrode, the adsorption of SAF obeys Frumkin isotherm.In 0.2 mol/l potassium hydrogen phthalate/HCl buffer solution, at pH 3.0, the sensitive adsorptive complex wave of Ga-SAF was obtained by linear sweep voltammetry. The composition of the electroactive complex was determined as Ga:SAF = 11. The peak height of the complex is proportional to the concentration of Ga(III) in the range of 1.5 × 10^–9 to 6.0 × 10^–7 mol/l, the detection limit is 1.0× 10^–9 mol/l. The proposed method has been applied to the determination of gallium content in aluminium alloys.     

Rapid determination of telmisartan in pharmaceuticals and serum by the parallel catalytic hydrogen wave method

The polarographic characteristics of telmisartan have been investigated in 0.8 mol L^–1 NH₃.H₂O–NH₄Cl (pH 8.9)–0.01 mol L^–1 H₂O₂ as supporting electrolyte. The results demonstrate that the polarographic reduction wave at ca. –1.30 V in the absence of H₂O₂ is a catalytic hydrogen wave, and the reduction wave enhanced by H₂O₂ is a so-called parallel catalytic hydrogen wave. The analytical sensitivity of the parallel catalytic hydrogen wave is ca. 60 times higher than that of the corresponding catalytic hydrogen wave. Based on the parallel catalytic hydrogen wave a novel method has been developed for determination of telmisartan by linear sweep polarography. The calibration curve is linear in the range 2.0×10^–8–2.0×10^–6 mol L^–1 and the detection limit is 1.0×10^–8 mol L^–1. The precision is excellent with relative standard deviations of 2.6% at a concentration of 1.0×10^–7 mol L^–1 telmisartan. The proposed method has been applied to the direct determination of the telmisartan in capsule forms and biological samples. The proposed method has been proved to be advantageous over existing CZE and MEKC methods in simplicity, rapidity, and reproducibility.     

Liquid Chromatographic Determination of Four Purine Bases Using Porous Graphitic Carbon Column

A high performance liquid chromatographic method has been developed for the simultaneous determination of hypoxanthine (Hx), xanthine (Xa), guanine (Gu) and adenine (Ad) in shellfish. The separation of these compounds was performed on a porous graphitic carbon column (100 × 4.6 mm I.D.) using acetonitrile-phosphate buffer (23/77 v/v) containing 0.5% trichloroacetic acid at pH 2.0 as the mobile phase. The flow rate was fixed to 1 mLmin^–1 and the detection was monitored at 254 nm. Calibration curves were found to be linear in the concentration range from 0.3 to 100 gmL^–1 with correlation coefficients (r²) > 0.999. The lowest detectable concentrations of Hx, Xa, Gu and Ad were 0.04, 0.06, 0.08, 0.07 g mL^–1 respectively. Recovery of all purine standards added to sea urchin gonad was above 97%. The proposed method was successfully applied for the determination of Hx, Xa, Gu and Ad in sea urchin gonad extract.     

Direct spectrophotometric method for the determination of cobalt with indane 1,2,3-trionetrioxime in aqueous medium

A simple, sensitive and selective Spectrophotometric method has been developed for the determination of cobalt using indane 1,2,3-trionetrioxime (ITT): The method is based on the colour reaction between ITT and cobalt(II) in sodium acetate-acetic acid buffer (pH 4.5–7.5) medium. The calibration graph for measurement at 320 nm is linear in the range 1.18–23.60g of cobalt per 25 ml, with molar absorptivity of 5.32×10⁴1mol^–1 cm^–1. The effect of interfering ions has been studied and the method was applied to the determination of cobalt in alloys, with good results.