Synthesis and characterization of highly fluorinated diamines and benzoxazines derived therefrom

A novel method for the synthesis of highly fluorinated benzoxazines in a high yield derived form a α,ω-diamine-polyfluoroalkane and α,ω-dianiline-polyfluoroalkane is described. The synthetic method increases the yield by 20% and reduces the reaction time by 90% in comparison to the currently known method, allowing synthesis of large quantity of highly fluorinated diamines. The diamines are used as the precursors for benzoxazine compounds. The diamines and benzoxazines are obtained in high yield and purity. The structures are characterized by nuclear resonance spectroscopy (NMR) and Fourier transform infrared spectroscopy (FT-IR).     

Highly selective hydrolytic kinetic resolution of terminal epoxides catalyzed by chiral (salen)Co(III) complexes. Practical synthesis of enantioenriched terminal epoxides and 1,2-diols

The hydrolytic kinetic resolution (HKR) of terminal epoxides catalyzed by chiral (salen)Co(III) complex 1 x OAc affords both recovered unreacted epoxide and 1,2-diol product in highly enantioenriched form. As such, the HKR provides general access to useful, highly enantioenriched chiral building blocks that are otherwise difficult to access, from inexpensive racemic materials. The reaction has several appealing features from a practical standpoint, including the use of H(2)O as a reactant and low loadings (0.2-2.0 mol %) of a recyclable, commercially available catalyst. In addition, the HKR displays extraordinary scope, as a wide assortment of sterically and electronically varied epoxides can be resolved to > or = 99% ee. The corresponding 1,2-diols were produced in good-to-high enantiomeric excess using 0.45 equiv of H(2)O. Useful and general protocols are provided for the isolation of highly enantioenriched epoxides and diols, as well as for catalyst recovery and recycling. Selectivity factors (k(rel)) were determined for the HKR reactions by measuring the product ee at ca. 20% conversion. In nearly all cases, k(rel) values for the HKR exceed 50, and in several cases are well in excess of 200.     

Highly functionalized benzene syntheses by directed mono or multiple magnesiations with TMPMgCl.LiCl

The direct magnesiation of highly functionalized aromatics bearing an ester, a nitrile, or a ketone can be readily performed by using an OBoc as a directing group and TMPMgCl.LiCl as a base. It allows, for example, the preparation of a meta-magnesiated benzophenone in >95%. After quenching, highly functionalized and substituted benzenes are obtained. [reaction: see text].     

Determination of acephate and its degradation product methamidophos in soil and water by solid-phase extraction (SPE) and GC-MS

Acephate and its metabolite, methamidophos, are both highly polar organophosphorus pesticides (OPs) and are therefore highly soluble in water, which leads to difficulties when traditional methods of extraction, such as LLE (liquid–liquid extraction), are used. Solid-phase extraction (SPE) is a relatively new, highly versatile method, which has proven successful in many cases that were considered problematic in the past. In this study, several adsorbents (polymeric and silica based) and parameters are considered and modified to obtain maximum recovery. Maximum recoveries for acephate and methamidophos were found to be 90–95% and 85–90% respectively with Oasis HLB cartridges and methylene chloride as the elution solvent. In order to establish applicability and reliability, the matrix effect of several real water and solid (compost and soil) samples was evaluated. A 20–30% diminution of recovery is noted for some samples with a complex matrix containing a high amount of dissolved organic matter.     

Organocatalytic highly enantioselective nitroaldol reaction of alpha-ketophosphonates and nitromethane

[reaction: see text] The first organocatalytic highly enantioselective nitroaldol reaction of alpha-ketophosphonates and nitromethane has been realized by using cupreine (2) or 9-O-benzylcupreine (3) as the catalyst. Both catalysts are highly reactive and highly enantioselective. alpha-Hydroxy-beta-nitrophosphonates have been synthesized in good yields and excellent enantioselectivities (>or=90% ee) at a low catalyst loading (5 mol %). These nitroaldol products may be reduced to the biologically significant beta-amino-alpha-hydroxyphosphonates with complete retention of the stereochemistry.     

Rod-like Cu/La/O nanoparticles as a catalyst for phenol hydroxylation

Rod-like La/Cu/O nanoparticles, synthesized by a simple coprecipitation reaction with a sonication process, are found to be highly active as a catalyst for the hydroxylation of phenol. Compared to the 4-6 h, 40% yield reported in the literature, our nanoparticle catalyst demonstrates a nearly 100% conversion within 4 h based on gas chromatography.     

Nitrogen‐Doped Carbon Nanotube‐Based Bilayer Thin Film as Transparent Counter Electrode for Dye‐Sensitized Solar Cells (DSSCs)

Carbon nanotubes (CNTs) have been widely considered as one of the promising candidates for replacing fluorine‐doped tin oxide (FTO)/platinum (Pt) electrodes to reduce the fabrication cost of dye‐sensitized solar cells (DSSCs). Here, we report that a bilayer transparent film containing N‐doped CNTs (which are highly catalytic) and normal CNTs (which are highly conductive) as a counter electrode in DSSCs results in efficiencies up to 2.18 %, yet still maintains a good transparency with a transmittance of approximately 57 % at 550 nm.     

2D Poly(arylene vinylene) Covalent Organic Frameworks via Aldol Condensation of Trimethyltriazine

Designing structural order in electronically active organic solids remains a great challenge in the field of materials chemistry. Now, 2D poly(arylene vinylene)s prepared as highly crystalline covalent organic frameworks (COFs) by base‐catalyzed aldol condensation of trimethyltriazine with aromatic dialdehydes are reported. The synthesized polymers are highly emissive (quantum yield of up to 50 %), as commonly observed in their 1D analogues poly(phenylene vinylene)s. The inherent well‐defined porosity (surface area ca. 1000 m² g^?1, pore diameter ca. 11 Å for the terephthaldehyde derived COF‐1) and 2D structure of these COFs also present a new set of properties and are likely responsible for the emission color, which is sensitive to the environment. COF‐1 is highly hydrophilic and reveals a dramatic macroscopic structural reorganization that has not been previously observed in framework materials.     

Hydroxyproline quantification for the estimation of collagen in tissue using multiple reaction monitoring mass spectrometry

Collagens are highly abundant mammalian proteins that contain a high content of hydroxylated amino acids such as hydroxyproline. We have exploited the high hydroxyproline content of collagen and developed a method for hydroxyproline quantification as a measure of collagen content in muscle samples. The novel method utilizes a highly selective and sensitive method of multiple reaction monitoring (MRM) by mass spectrometry. The analytical method is simple, rapid (5min), convenient (no derivatization), precise (<17% RSD), accurate (90-108%), sensitive (4.88nmol/L) and linear (R(2)>0.999) over three orders of magnitude (5-5000nmol/L).     

Solution-phase total synthesis of the hydrophilic natural product argifin using 3,4,5-tris(octadecyloxy)benzyl tag

A solution-phase total synthesis of argifin using 3,4,5-tris(octadecyloxy)benzyl tag as a hydrophobic protective group of carboxylic acid was developed to produce 44% overall yield for 16 linear steps. Argifin, a novel class of natural product chitinase inhibitor, is a highly water-soluble cyclic pentapeptide, so hitherto, only solid-phase synthesis techniques have been used to conveniently prepare the compound and its derivatives. 3,4,5-Tris(octadecyloxy)benzyl alcohol (HO-TAGa) and its esters are highly crystalline materials and highly capable of dissolving in less-polar solvents such as dichloromethane, benzene, THF, etc., but insoluble in polar solvents such as methanol and DMSO. The combination of HO-TAGa and Fmoc-based peptide synthesis, together with simple purification by recrystallization from MeOH solution, furnished an efficient and practical route of argifin production in the liquid-phase.     

Molecular dynamics simulations of self-diffusion coefficient and thermal conductivity of methane at low and moderate densities

This article demonstrates a highly accurate molecular dynamics (MD) simulation of thermal conductivity of methane using an ab initio intermolecular potential. The quantum effects of the vibrational contribution to thermal conductivity are more efficiently accounted for in the present MD model by an analytical correction term as compared to by the Monte Carlo method. The average deviations between the calculated thermal conductivity and the experimental data are 0.92% for dilute methane and 1.29% for methane at moderate densities, as compared to approximately 20% or more in existing MD calculations. The results demonstrate the importance of considering vibrational contribution to the thermal conductivity which is mainly through the self-diffusion process.     

Transforming nonselective into chemoselective metal catalysts for the hydrogenation of substituted nitroaromatics

It is generally accepted that good hydrogenation noble and nonnoble metal catalysts such as Pt, Ru, or Ni are not chemoselective for hydrogenation of nitro groups in substituted aromatic molecules. We have found that it is possible to transform nonchemoselective into highly chemoselective metal catalysts by controlling the coordination of metal surface atoms while introducing a cooperative effect between the metal and a properly selected support. Thus, highly chemoselective and general hydrogenation Pt, Ru, and Ni catalysts can be prepared by generating nanosized crystals of the metals on the surface of a TiO 2 support and decorating the exposed (111) and (100) crystal faces by means of a simple catalyst activation procedure. By doing this, it has been possible to change the relative rate for hydrogenating competitive groups present in the molecule by almost 2 orders of magnitude, increasing the chemoselectivity from less than 1% to more than 95%.     

Highly enantioselective alkynylzinc addition to aromatic aldehydes catalyzed by self-assembled titanium catalysts

A highly enantioselective catalyst generated by a combination of BINOL and another ligand with Ti(OiPr)4 was found to be highly effective for the alkynylzinc addition to aromatic aldehydes with enantioselectivities as high as >99%.     

聚乙二醇对苯二甲酸酯-b-聚对苯二甲酸丁二醇酯多嵌段共聚物内部贯通多孔支架的制备方法

以天然或合成的可生物降解材料制备细胞外基质支架是组织工程所涉及到的关键问题之一.常用的制备方法由于涉及到有机溶剂的使用、较高的加工温度以及致孔剂的残余问题,对于活性物质的引入均带来不利影响,相关的改进工作(如不使用有机溶剂和消除残余致孔剂等)尽管也获得了具有良好孔结构的支架,但却使制备过程更趋复杂.     

Microscopic behavior of polyvinylpyrrolidone hydrophilizing agents on phase inversion polyethersulfone hollow fiber membranes for hemofiltration

In some biomedical applications, hollow fiber membranes are highly demanded with desirably asymmetric structures, characterized by a dense selective inner skin with which the blood is in contact and supported by porous outer-layer. In this work, such membranes have been successfully prepared by appropriately adjusting membrane manufacturing parameters. Different molecular weights of polyvinylpyrrolidones (PVPs) were used as the hydrophilizing additives for membrane spinning in order to examine their underlying effects on membrane physicochemical properties, morphological structure, solute rejection behavior and hemofiltration performance. Numerous state-of-the-art characterizations on the resultant membranes showed that the hollow fiber membranes spun with the PVP having a molecular weight of 360K as the additive have the most hydrophilic, smooth and highly net negative charged inner surfaces. These membranes also exhibit the best hemofiltration performance in terms of the characteristically least fouling behavior with a normalized flux above 90%, the highest retention of serum albumin for more than 90%, and the best clearance for the simulated β₂-microglobulin toxin in blood waste.     

Purification and quantitative analysis of urinary prostanoids in human and in rat by packed and capillary gas chromatography-negative-ion chemical-ionization mass spectrometry

We describe a method for the quantitative analysis of prostaglandin (PG) E2 and the major urinary metabolites PGI2 and thromboxane (Tx) A2 in human and in rat by combined gas chromatography and negative-ion chemical-ionization mass spectrometry. The procedure is based on the sequential use of small columns with distinct properties combined with a thin-layer chromatography step, for the extraction and the purification of urinary prostaglandins. The compounds are then analysed as their pentafluorobenzyl ester-O-methyloxime-trimethylsilyl ether derivatives, using either packed or capillary columns. Deuterated analogues are used as internal standards. The method was established by using tritiated prostaglandins covering the extremes of polarity in order to optimize the recovery of prostanoids as well as the quality of the chromatograms and spectra. The overall recovery was 24%. Standard curves were obtained by the same procedure and found to be reproducible, with a maximal day-to-day variation of +/- 5%. The relatively simple approach required for the sequential extraction and purification of prostaglandins on small columns of distinct properties, combined with the highly specific and highly sensitive method of detection, places this procedure among the most reliable method for measuring urinary prostanoids in both humans and animals. In addition, the procedure is faster than classical approaches and necessitates smaller amounts of samples and solvents.     

Zirconium(IV) chloride catalyzed new and efficient protocol for the selective cleavage of p-methoxybenzyl ethers

A highly selective and efficient method for the unmasking of p-methoxybenzyl (PMB) ethers and esters has been developed by use of 20 mol % of zirconium(IV) chloride as Lewis acid in acetonitrile. The present method is very fast, and the conditions are tolerable to a variety of acid/base-sensitive protecting groups and substrates such as carbohydrates, terpenes, and amino acids. The products are obtained in good to high yields.     

Enantioselective syntheses of isoaltholactone, 3-epi-altholactone, and 5-hydroxygoniothalamin

A flexible enantioselective route to highly functionalized alpha, beta-unsaturated delta-lactones has allowed for the syntheses of the styryllactones: isoaltholactone, 3-epi-altholactone, and 5-hydroxygoniothalamin in 10%, 5%, and 13% overall yields from furfural, respectively. This approach derives its asymmetry by applying the Sharpless catalytic asymmetric dihydroxylation to vinylfuran. The resulting diols are produced in high enantioexcess and can be stereoselectively transformed into alpha,beta-unsaturated delta-lactones via a short highly diastereoselective oxidation and reduction sequence.     

Stress–strain relations of crosslinked rubbers under different types of strain

Experimental data for the stresses and the deformations for crosslinked rubbers at uniaxial and symmetrical and asymmetrical biaxial extension and pure shear are given. Stressed states up to 100% extension are described by a single parameter, the highly elastic potential of Bartenev and Khazanovich. The classical statistical potential of Kuhn-James-Guth-Treloar is not in agreement with experimental data, as shear modulus G has different values for different types of stressed states.     

A green chemistry approach to a more efficient asymmetric catalyst: solvent-free and highly concentrated alkyl additions to ketones

There is a great demand for development of catalyst systems that are not only efficient and highly enantioselective but are also environmentally benign. Herein we report investigations into the catalytic asymmetric addition of alkyl and functionalized alkyl groups to ketones under highly concentrated and solvent-free conditions. In comparison with standard reaction conditions employing toluene and hexanes, the solvent-free and highly concentrated conditions permit reduction in catalyst loading by a factor of 2- to 40-fold. These new conditions are general and applicable to a variety of ketones and dialkylzinc reagents to provide diverse tertiary alcohols with high enantioselectivities. Using cyclic conjugated enones, we have performed a tandem asymmetric addition/diastereoselective epoxidation using the solvent-free addition conditions followed by introduction of a 5.5 M decane solution of tert-butyl hydroperoxide (TBHP) to generate epoxy alcohols. This one-pot procedure allows access to syn epoxy alcohols with three contiguous stereocenters with excellent enantio- and diastereoselectivities and high yields. Both the solvent-free asymmetric additions and asymmetric addition/diastereoselective epoxidation reactions have been conducted on larger scale (5 g substrate) with 0.5 mol % catalyst loadings. In these procedures, enantioselectivities equal to or better than 92% were obtained with isolated yields of 90%. The solvent-free and highly concentrated conditions are a significant improvement over previous solvent-based protocols. Further, this chemistry represents a rare example of a catalytic asymmetric reaction that is highly enantioselective under more environmentally friendly solvent-free conditions.