Polyelectrolyte adsorption layers studied by streaming potential and particle deposition

Adsorption of a cationic polyelectrolyte, polyallylamine hydrochloride (PAH), having a molecular weight of 70,000 on mica was characterized by the streaming potential method and by deposition of negative polystyrene latex particles. Formation of PAH layers was followed by determining the apparent zeta potential of surface zeta as function of bulk PAH concentration. The zeta potential was calculated from the streaming potential measured in the parallel-plate channel formed by two mica plates precovered by the polyelectrolyte. The experimental data were expressed as the dependence of the reduced zeta potential zeta/zeta0 on the PAH coverage Theta(PAH), calculated using the convective diffusion theory. It was found that for the ionic strength of 10(-2) M, the dependence of zeta/zeta0 on Theta(PAH) can be reflected by the theoretical model formulated previously for surfaces covered by colloid particles. The electrokinetic measurements were complemented by particle deposition experiments on PAH-covered mica surfaces. A direct correlation between the polymer coverage and the initial deposition rate of particles, as well as the jamming coverage, was found. For ThetaPAH > 0.3 the initial deposition rate attained the value predicted from the convective diffusion theory for homogeneous surfaces. The initial deposition rates for surfaces modified by PAH were compared with previous experimental and theoretical results obtained for heterogeneous surfaces formed by preadsorption of colloid particles. It was revealed that negative latex deposition occurred at surfaces exhibiting negative apparent zeta potential, which explained the anomalous deposition of particles observed in previous works. It was suggested that the combined electrokinetic and particle deposition methods can be used for detecting adsorbed polyelectrolytes at surfaces for coverage range of a percent. This enables one to measure bulk polyelectrolyte concentrations at the level of 0.05 ppm.     

Colloid particle and protein deposition - electrokinetic studies

Recent developments in the electrokinetic determination of particle, polyelectrolyte and protein deposition at solid/electrolyte interfaces, are reviewed. In the first section basic theoretical results are discussed enabling a quantitative interpretation of the streaming current/potential and microelectrophoretic measurements. Experimental results are presented, pertinent to electrokinetic characteristics of simple (homogeneous) surfaces such as mica, silica and various polymeric surfaces used in protein studies. The influence of the ionic strength, background electrolyte composition and pH is discussed, and the effective (electrokientic) charge of these interfaces is evaluated. In the next section, experimental data obtained by streaming potential measurements for colloid particle mono- and bilayers are presented and interpreted successfully in terms of available theoretical approaches. These results, obtained for model systems of monodisperse colloid particles are used as reference data for discussion of more complicated experiments performed for polyelectrolyte and protein covered surfaces. Results are discussed, obtained for cationic polyelectrolytes (PEI, PAH) and fibrinogen adsorbing on mica, interpreted quantitatively in terms of the theoretical approach postulating a heterogeneous 3D charge distribution. The Gouy-Chapman model, based on the continuous charge distribution proved inadequate. Interesting experimental data are also discussed, obtained by electrophoretic methods in the case of protein adsorption on colloid latex particles. In the last section, supplementary results on particle deposition on heterogeneous surfaces produced by controlled protein adsorption are discussed. Quantitative relationships between the amount of adsorbed protein, zeta potential of the interface and the particle coverage are specified. Possibility of evaluating the heterogeneity of protein charge distribution is pointed out. The anomalous deposition of colloid particles on protein molecules bearing the same sign of zeta potential, which contradicts classical DLVO theory, is interpreted in terms of the fluctuation theory. It is concluded that theoretical and experimental results obtained for model colloid systems and flat interfaces can be effectively used for interpretation of protein adsorption phenomena, studied by electrophoresis. In this way the universality of electrokinetic phenomena is underlined.     

Deposition of colloid particles on protein layers: fibrinogen on mica

Colloid particle deposition was applied to characterize fibrinogen (Fb) monolayers on mica, which were produced by controlled adsorption under diffusion transport. By adjusting the time of adsorption and the bulk Fb concentration, monolayers of desired surface concentration were obtained. The surface concentration of Fb was determined directly by AFM enumeration of single molecules adsorbed over the substrate surface. It was proven that Fb adsorbed irreversibly on mica both at pH 3.5 and at pH 7.4 with the rate governed by bulk transport. The electrokinetic properties of Fb monolayers produced in this way were studied using the streaming potential method. The dependence of the apparent zeta potential of Fb monolayers was determined as a function of the coverage. It was shown that for pH 3.5 the initial negative zeta potential of the mica substrate was converted to positive for Fb coverage exceeding 0.16. On the other hand, for pH 7.4, the zeta potential of a Fb-covered mica remained negative for the entire coverage range. The charge distribution in Fb monolayers was additionally studied using the colloid deposition method, in which negatively and positively charged polystyrene latex particles (ca. 800 nm in diameter) were used. An anomalous deposition of negative latex particles on substrates exhibiting a negative zeta potential was observed. Results of these experiments were quantitatively interpreted in terms of the fluctuation theory assuming that adsorption sites consisted of two and three Fb molecules, for pH 3.5 and 7.4, respectively. These results suggested that for pH 7.4, the distribution of charge on Fb molecules was heterogeneous, characterized by the presence of positive patches, whereas the average zeta potential was negative, equal to -19 mV. The utility of the colloid deposition method for studying Fb monolayers was further demonstrated in deposition experiments involving positive latex particles. It was shown that for a rather broad range of fibrinogen coverage, both the positive and the negative latex particles can adsorb on surfaces covered by Fb, which behaved, therefore, as superadsorbing surfaces. It was also concluded that the colloid deposition method can be used to determine the Fb bulk concentration for the range inaccessible for other methods.     

Zeta potential of particle bilayers on mica: a streaming potential study

The streaming potential of mica covered by bilayers of latex particles was measured using the parallel-plate channel cell. The size of the first latex (A500) bearing amidine charged groups was 503 nm and the second latex (L800) bearing sulfonate groups was 810 nm (at pH 5.5 and an ionic strength of 10(-2)M). The A500 latex exhibited an isoelectric point at pH 10.5, whereas the L800 latex was strongly negative at all pH. Mica sheets were precovered first by the A500 latex particles under diffusion transport conditions. The coverage of this supporting layer was regulated between 0.02 and 0.5 by changing the bulk concentration of latex and the deposition time. Then, the second layer of the L800 latex of regulated coverage up to 0.55 was deposited under the diffusion transport. The coverage of particles and their distributions in both layers were determined by a direct enumeration of particles by optical microscopy under wet conditions and by AFM. It was shown that the structure of the L800 particle layers and the maximum coverage were in accordance with theoretical simulations performed according to the random sequential adsorption (RSA) model. After forming bilayers of desired composition and structure, streaming potential measurements were carried out. The influence of the mica substrate, the supporting layer coverage, and its zeta potential on the apparent zeta potential of bilayers was systematically studied. It was established that for a bilayer coverage exceeding 0.20, the net zeta potential became independent of the substrate and the supporting layer zeta potentials. Then, the asymptotic values of the zeta potential of the bilayer approach 1/√2=0.71 of the bulk zeta potential of the particles forming the external (second) layer. This behavior was interpreted theoretically in terms of the electrokinetic model derived previously for monolayers. It was also concluded that results obtained in this work can be exploited for interpretation of polyelectrolyte film formation in the layer by layer (LbL) processes and protein adsorption pertinent to the antigen/antibody interactions.     

Characterization of polyelectrolyte multilayers by the streaming potential method

Polyelectrolyte multilayer adsorption on mica was studied by the streaming potential method in the parallel-plate channel setup. The technique was calibrated by performing model measurements of streaming potential by using monodisperse latex particles. Two types of polyelectrolytes were used in our studies: poly(allylamine) hydrochloride (PAH), of a cationic type, and poly(sodium 4-styrenesulfonate) (PSS) of an anionic type, both having molecular weight of 70,000. The bulk characteristics of polymers were determined by measuring the specific density, diffusion coefficient for various ionic strengths, and zeta potential. These measurements as well as molecular dynamic simulations of chain shape and configurations suggested that the molecules assume an extended, wormlike shape in the bulk. Accordingly, the diffusion coefficient was interpreted in terms of a simple hydrodynamic model pertinent to flexible rods. These data allowed a proper interpretation of polyelectrolyte multilayer adsorption from NaCl solutions of various concentrations or from 10(-3) M Tris buffer. After completing a bilayer, periodic variations in the apparent zeta potential between positive and negative values were observed for multilayers terminated by PAH and PSS, respectively. These limiting zeta potential values correlated quite well with the zeta potential of the polymers in the bulk. The stability of polyelectrolyte films against prolonged washing (reaching 26 h) also was determined using the streaming potential method. It was demonstrated that the PSS layer was considerably more resistant to washing, compared to the PAH layer. It was concluded that the experimental data were consistent with the model postulating particle-like adsorption of polyelectrolytes with little chain interpenetration. It also was concluded that due to high sensitivity, the electrokinetic method applied can be effectively used for quantitative studies of polyelectrolyte adsorption, desorption, and reconformation.     

High density silver nanoparticle monolayers produced by colloid self-assembly on polyelectrolyte supporting layers

A stable silver nanoparticle suspension was synthesized via the reduction of silver nitrate using sodium borohydride and sodium citrate. The particle's shape and size distribution were measured by various methods. The electrophoretic mobility measurements revealed that the zeta potential of particles was highly negative, increasing slightly with the ionic strength, from -52 mV for I=10(-5) M to -35 mV for I=3×10(-2) M (for pH=5.5). The zeta potential of mica modified by the adsorption of cationic polyelectrolytes: PEI and PAH was also determined using the streaming potential measurements. The modified mica sheets were used as substrates for particle monolayers formed via colloid self assembly. The kinetics of this process, proceeding under diffusion-controlled transport conditions, was quantitatively evaluated by a direct enumeration of particles using the AFM and SEM techniques. Both the kinetics of particle deposition and the maximum surface concentration were determined. From the slope of the initial deposition rates, the equivalent diameter of particles was determined to be 16 nm, in agreement with previous measurements. Based on this finding, an efficient method of determining particle size in suspension was proposed. It was also demonstrated that for higher ionic strengths, the maximum coverage of particle monolayers on PAH modified mica exceeded 0.39. The kinetic data were quantitatively interpreted in terms of the random sequential adsorption (RSA) model using the effective hard particle concept.     

Irreversible adsorption of particles at random-site surfaces

Irreversible adsorption of negatively charged polystyrene latex particles (averaged diameter 0.9 microm) at heterogeneous surfaces was studied experimentally. The substrate bearing a controlled number of adsorption sites was produced by precovering mica sheets by positively charged polystyrene latex (averaged diameter of 0.45 microm). Positive latex (site) deposition was carried out under diffusion-controlled transport conditions and its coverage was determined by direct particle counting using the optical microscopy. Deposition kinetics of larger latex particles (averaged diameter 0.9 microm) at heterogeneous surfaces produced in this way was studied by direct optical microscope observations in the diffusion cell (under no-convection transport conditions). It was demonstrated that the structure of larger particle monolayers, characterized in terms of the pair correlation function, showed much more short-range ordering than it was predicted for homogeneous surface monolayers at the same coverage. This was found in agreement with theoretical predictions derived from the Monte Carlo simulations. On the other hand, particle adsorption kinetics was quantitatively interpreted in terms of numerical solutions of the governing diffusion equation with the nonlinear boundary condition derived from Monte Carlo simulations. From these kinetic measurements maximum (jamming) coverage of particles was determined in an accurate way by extrapolation. It was concluded that both the monolayer structure and jamming coverage were strongly influenced by the site multiplicity (coordination) effect.     

Irreversible adsorption of particles on heterogeneous surfaces

Methods of theoretical and experimental evaluation of irreversible adsorption of particles, e.g., colloids and globular proteins at heterogeneous surfaces were reviewed. The theoretical models were based on the generalized random sequential adsorption (RSA) approach. Within the scope of these models, localized adsorption of particles occurring as a result of short-ranged attractive interactions with discrete adsorption sites was analyzed. Monte-Carlo type simulations performed according to this model enabled one to determine the initial flux, adsorption kinetics, jamming coverage and the structure of the particle monolayer as a function of the site coverage and the particle/site size ratio, denoted by lambda. It was revealed that the initial flux increased significantly with the site coverage theta(s) and the lambda parameter. This behavior was quantitatively interpreted in terms of the scaled particle theory. It also was demonstrated that particle adsorption kinetics and the jamming coverage increased significantly, at fixed site coverage, when the lambda parameter increased. Practically, for alpha = lambda2theta(s) > 1 the jamming coverage at the heterogeneous surfaces attained the value pertinent to continuous surfaces. The results obtained prove unequivocally that spherically shaped sites were more efficient in binding particles in comparison with disk-shaped sites. It also was predicted that for particle size ratio lambda < 4 the site multiplicity effect plays a dominant role, affecting significantly the structure of particle monolayers and the jamming coverage. Experimental results validating main aspects of these theoretical predictions also have been reviewed. These results were derived by using monodisperse latex particles adsorbing on substrates produced by covering uniform surface by adsorption sites of a desired size, coverage and surface charge. Particle deposition occurred under diffusion-controlled transport conditions and their coverage was evaluated by direct particle counting using the optical and electron microscopy. Adsorption kinetics was quantitatively interpreted in terms of numerical solutions of the governing diffusion equation with the non-linear boundary condition derived from Monte-Carlo simulations. It was proven that for site coverage as low as a few percent the initial flux at heterogeneous surfaces attained the maximum value pertinent to homogeneous surfaces. It also was demonstrated that the structure of larger particle monolayers, characterized in terms of the pair correlation function, showed much more short-range ordering than predicted for homogeneous surface monolayers at the same coverage. The last part of this review was devoted to detection of polyelectrolyte multilayers on various substrates via particle deposition experiments.     

Solute distribution and stability in emulsion-based delivery systems: an EPR study

Adsorption and desorption of human serum albumin (HSA) from aqueous solutions on mica were studied using AFM and in situ streaming potential measurements. A quantitative interpretation of these experiments was achieved in terms of the theoretical model postulating a 3D adsorption of HSA molecules as discrete particles. These measurements, performed for various ionic strength, allowed one to determine the coverage of HSA as a function of the zeta potential of mica. This allowed one to determine the amount of irreversibly bound HSA as a function of the ionic strength. It was found that the coverage of irreversibly adsorbed HSA increased from 0.52 mg m(-2) for I=1.3×10(-3) M to 1.6 mg m(-2) for I=0.15M (pH=3.5). The significant role of ionic strength was attributed to the lateral electrostatic repulsion among adsorbed HSA molecules, positively charged at this pH value. This was quantitatively interpreted in terms of the effective hard particle concept previously used for colloid particles. The experimental results confirmed that monolayers of irreversibly bound HSA of a well-controlled coverage can be produced by adjusting the ionic strength of the suspension.     

Fibrinogen adsorption on mica studied by AFM and in situ streaming potential measurements

Adsorption of fibrinogen from aqueous solutions on mica was studied using AFM and in situ streaming potential measurements. In the first stage, bulk physicochemical properties of fibrinogen and the mica substrate were characterized for various ionic strength and pH. The zeta potential and number of uncompensated (electrokinetic) charges on the protein surfaces were determined from microelectrophoretic measurements. Analogously, using streaming potential measurements, the electrokinetic charge density of mica was determined for pH range 3-10 and the NaCl background electrolyte concentration of 10(-3) and 10(-2) M. Next, the kinetics of fibrinogen adsorption at pH 3.5 and 7.4 in the diffusion cell was studied using a direct AFM determination of the number of molecules per unit area of the mica substrate. Then, streaming potential measurements were performed to determine the apparent zeta potential of fibrinogen-covered mica for different pH and ionic strength in terms of its surface concentration. A quantitative interpretation of these streaming potential measurements was achieved in terms of the theoretical model postulating a side-on adsorption of fibrinogen molecules as discrete particles. On the basis of these results, the maximum coverage of fibrinogen Θ close to 0.29 was predicted, in accordance with previous theoretical predictions. It was also suggested that anomalous adsorption for pH 7.4, where fibrinogen and the mica substrate were both negatively charged, can be explained in terms of a heterogeneous charge distribution on fibrinogen molecules. It was estimated that the positive charge was 12 e (for NaCl concentration of 10(-2) M and pH 7.4) compared with the net charge of fibrinogen at this pH, equal to -21 e. Results obtained in this work proved that the coverage of fibrinogen can be quantitatively determined using the streaming potential method, especially for Θ < 0.2, where other experimental methods become less accurate.     

Irreversible adsorption of latex particles on fibrinogen covered mica

Physicochemical properties of bovine plasma fibrinogen (Fb) in electrolyte solutions were characterized. These comprised the diffusion coefficient (hydrodynamic radius), determined by the DLS method, electrophoretic mobility and the isoelectric point. The hydrodynamic radius of Fb was 12 nm for pH<5. The number of uncompensated (electrokinetic) charges on the protein N _c was calculated from the electrophoretic mobility data. It was found that for pH<5.8 the electrokinetic charge was positive, independently of the ionic strength and negative for pH>5.8. For pH=3.5 the value of N _c , was 26 for 10^?3 M. Similar electrokinetic measurements were performed for the mica substrate using the streaming potential cell. It was shown that for pH=3.5 and 10^?3 M, the zeta potential of mica remained negative (?50 mV). This promoted an irreversible, electrostatically driven adsorption of Fb, which was confirmed in experiments carried out under diffusion-controlled transport. The surface concentration of Fb on mica was determined directly by AFM counting. By adjusting the time of adsorption, Fb monolayers of desired coverage were produced. Independently, the presence of Fb on mica was determined quantitatively by the colloid enhancement method, in which negatively charged latex particles were used, having the diameter of 800 nm. It was found that for Fb coverage below 0.05 the method was more sensitive than other indirect methods. The experimental data obtained in latex deposition experiments were adequately interpreted in terms of the random site model used previously for polyelectrolytes. It was shown that adsorption sites consisted of a cluster of two Fb molecules. It was concluded that the colloid enhancement method can be successfully used for detecting the presence of proteins at solid substrates and to determine the uniformity of monolayers in the nanoscale.     

Polyelectrolyte adsorption on charged surfaces: study by electrokinetic measurements

In order to describe the influence of cationic polyelectrolytes on flocculation of disperse systems the adsorption of poly (diallyldimethylammonium chloride) (PDADMAC) onto silica, mica and acidic polymer latex was investigated. The plateau value of the adsorption isotherms grows with increasing surface charge density of the substrates and electrolyte concentration. The adsorbed layer of the polycation was characterized by zeta potential measurements with KCl solutions of constant ionic strength and varied pH. The zero point of the charge as well as the shape of the zeta potential–pH plot depends on the coverage of the surface with polycations. For fully covered substrates the zero point of the charge as well as the pK_A and pK_B values calculated by a stochastic search programme are independent of the substrate. Maximum flocculation was observed at about 30% of the plateau value of the adsorption isotherms.     

Super-stoichiometric charge neutralization in particle-polyelectrolyte systems

The adsorption of poly(vinylamine) (PVA) on poly(styrene sulfate) latex particles is studied, and its consequences on the charging behavior and suspension stability are investigated. The adsorption process is assessed by batch depletion experiments and time-resolved electrophoretic mobility measurements. The adsorption of PVA appears to be basically irreversible. The rate of adsorption decreases with decreasing polymer dose. At low polymer dose, the polymer coverage corresponds to the amount of the polyelectrolyte added, while at high polymer dose, the polymer coverage saturates the surface. Stability ratios are determined by dynamic light scattering, and strongly depend on the polymer dose and salt level. The aggregation is rapid near the isoelectric point (IEP), and it slows down when moving away from it. The charge neutralization is highly nonstoichiometric with charging ratios (CR) larger than unity, meaning that several charges on an adsorbed polyelectrolyte chain are necessary to neutralize a single charge on the particle surface. By comparing the IEP for particles and polyelectrolytes of different charge densities, we find a strong dependence of the CR on the mismatch between the average distances between individual charges on the surface and on the polyelectrolyte. A simple model is proposed to explain this trend.     

Study on the interaction between anionic and cationic latex particles and Portland cement

The interaction between organic latex polymers and the surface of hydrating cement was investigated by measuring the zeta potential and adsorbed amount of polymer on cement. First, differently charged model latex particles were synthesized in aqueous media by well-known emulsion polymerization technique. The latex polymers were characterized by differential scanning calorimetry (DSC), dynamic light scattering (DLS) and environmental scanning electron microscopy (ESEM). Electrokinetic latex surface properties were investigated by means of streaming potential measurements using a particle charge detector (PCD). It is shown that the anionic latexes adsorb a considerable amount of Ca²⁺ from the cement pore solution. Next, adsorption of the latex polymers on the surface of hydrating cement was confirmed by zeta potential measurements using the electroacoustic method. A water to cement ratio in the cement paste as low as 0.5 was studied, representing actual conditions in mortar and concrete. Additionally, adsorption isotherms were determined in a sedimentation test using the depletion method. For all latex polymers, Langmuir type adsorption isotherms were found. The latex dosages required to achieve saturated adsorption on the cement surface obtained from zeta potential measurements correspond well with those determined in the sedimentation test. Electron microscopy photographs confirm that the charged latex polymers adsorb selectively on surface areas of hydrating cement showing opposite charge. This way, domains of organic latex polymers exist on the cement surface. They provide adhesion between the inorganic cement matrix and the organic polymer film formed later on by particle coalescence as a result of cement hydration and drying.     

Hematite nanoparticle monolayers on mica electrokinetic characteristics

Electrokinetic properties of α-Fe(2)O(3) (hematite) nanoparticle monolayers on mica were thoroughly characterized using the streaming potential method. Hematite suspensions were obtained by acidic hydrolysis of ferric chloride. The average size of particles (hydrodynamic diameter), determined by dynamic light scattering (DLS) and AFM, was 22nm (pH=5.5, I=10(-2)M). The hematite monolayers on mica were produced under diffusion-controlled transport from the suspensions of various bulk concentration. The monolayer coverage, quantitatively determined by AFM and SEM, was regulated within broad limits by adjusting the nanoparticle deposition time. This allowed one to uniquely express zeta potential of hematite monolayers, determined by the streaming potential measurements, in terms of the particle coverage. Such dependencies, obtained for various pH, were successfully interpreted in terms of the three-dimensional electrokinetic model. A universal calibrating graph was produced enabling one to determine hematite monolayer coverage from the measured value of the streaming potential. The influence of the ionic strength, varied between 10(-4) and 10(-2)M, on the zeta potential of hematite monolayers was also studied. Additionally, the stability of monolayers (desorption kinetics) was determined under in situ conditions using the streaming potential method. Our experimental data prove that it is feasible to produce uniform and stable hematite particle monolayers of well-controlled coverage. Such monolayers may find practical applications as universal substrates for protein immobilization (biosensors) and in electrocatalytic applications.     

Probing of polyelectrolyte monolayers by zeta potential and wettability measurements

Detection of the very first step of polyelectrolyte adsorption onto a solid support is of great importance for understanding mechanisms of solid surface modification. It was shown that streaming potential and contact angle measurements can be successfully used for polyelectrolyte (PE) adsorption characterization in a broad range of surface coverage. Cationic polyallylamine hydrochloride (PAH) was used for the formation of the layer. The electrokinetic characteristics of the substrate covered by the PAH layer were compared with contact angles measured under wet (captive air bubble/substrate in water) and dry (sessile water droplet/dried substrate) conditions. It has been demonstrated that contact angle values determined under both conditions are in good agreement. The observed rapid increase in the contact angle from zero for the bare mica surface to the value close to one characteristic of the PAH monolayer appears in the same PAH coverage range as zeta potential value changes due to adsorption. These results show that wettability can be as sensitive to the presence of small amounts of adsorbed species as electrokinetic measurements.     

Protonation of Lysozymes and Its Consequences for the Adsorption onto a Mica Surface

Several physicochemical properties of chicken egg white lysozyme (LSZ) in electrolyte solutions were determined. The hydrodynamic diameter of LSZ at an ionic strength of 0.15 M was found to be 4.0 nm. Using the determined parameters, the number of uncompensated (electrokinetic) charges, N(c), on the molecule surface was calculated from the electrophoretic mobility data. It was found that the N(c) = 2.8 at pH = 3.0 and an ionic strength of I = 0.15 M. At the lower ionic strength, I = 1 × 10(-3) M, this positive charge increased to N(c) = 5.6 at a pH = 3.0 The physicochemical characteristics were supplemented by the dynamic viscosity measurements. The intrinsic viscosity and the hydrodynamic diameter results were compared with theoretical predictions from Brenner's model. Using this approach, it was found that the effective molecule length of LSZ is equal to L(ef) = 5.6 nm. Additional information on the LSZ adsorbed films was obtained by the contact angle measurements. The notably large contact angles were measured on LSZ films formed under the conditions where both the LSZ and the mica were oppositely charged. The higher the positive zeta potential of LSZ, the greater the contact angle measured, which indicates that LSZ affinity for the adsorption on mica increases with its uncompensated charge. The adsorption dependence on the zeta potential of LSZ was explained, assuming a roughly uniform distribution of the net charge on the molecule surface. This assumption is supported by the results of depositing negatively charged, fluorescent latex particles onto the mica surface, which had been modified by LSZ adsorption. The highest latex coverage was formed on mica surfaces that had first been coated with LSZ solutions of lower pH, as a result of the increasing charge of LSZ monolayers in this condition.     

Adsorption of alpha-chymotrypsin onto mica in laminar flow conditions. Adsorption kinetic constant as a function of tris buffer concentration at pH 8.6

We examined the adsorption kinetics of alpha-chymotrypsin (pH 8.6, 10(-2) to 0.5 M Tris buffer) on muscovite mica in conditions of laminar flow through a slit. The range of buffer concentrations is between two limits: (i) no adsorption in 1 M Tris and (ii) no desorption in 10(-3) M Tris. Studying the dependence of adsorption kinetics on the wall shear rate leads to the determination of the interfacial adsorption kinetic constant ka and the diffusion coefficient. The obtained value for the diffusion coefficient is close to the one expected from the molecular size of alpha-chymotrypsin. The interfacial adsorption kinetic constant of alpha-chymotrypsin decreases when ionic strength increases, while the initial desorption constant (over a part of all the adsorbed population) shows the contrary. Although alpha-chymotrypsin is almost at its isoelectric point, the effect of ionic strength on the adsorption kinetics suggests the importance of electrostatic interactions between the protein and mica. We observed an increase in the adsorption rate, at a surface coverage near 0.14 microg cm(-2), for adsorption in 10(-2) M Tris and the low wall shear rates (<300 s(-1)). This change in the adsorption rate suggests a structural transition, that we assume again to be due to electrostatic interactions, but between proteins. The large dipole moment of the protein may induce this transition, illustrated here by the ferroelectric/antiferroelectric pattern. The variation of the zeta potential with interfacial concentration seems to be in agreement with such a model.     

Mechanisms of fibrinogen adsorption on latex particles determined by zeta potential and AFM measurements

The adsorption of fibrinogen on polystyrene latex particles was studied using the concentration depletion method combined with the AFM detection of residual protein after adsorption. Measurements were carried out for a pH range of 3.5-11 and an ionic strength range of 10(-3)-0.15 M NaCl. First, the bulk physicochemical properties of fibrinogen and the latex particle suspension were characterized for this range of pH and ionic strength. The zeta potential and the number of uncompensated (electrokinetic) charges on the protein were determined from microelectrophoretic measurements. It was revealed that fibrinogen molecules exhibited amphoteric characteristics, being on average positively charged for pH <5.8 (isolectric point) and negative otherwise. However, the latex particles did not show any isoelectric point, remaining strongly negative for this pH range. Afterward, systematic measurements of the electrophoretic mobility of fibrinogen-covered latex were carried out as a function of the amount of adsorbed protein, expressed as the surface concentration. A monotonic increase in the electrophoretic mobility (zeta potential) of the latex was observed in all cases, indicating a significant adsorption of fibrinogen on latex for pH below 11. It was also proven that fibrinogen adsorption was irreversible, with the maximum surface concentration varying between 2.5 and 5 × 10(3) μm(-2) (weight concentration of a bare molecule was 1.4 to 2.8 mg m(-2)). These measurements revealed two main adsorption mechanisms of fibrinogen: (i) the unoriented (random) mechanism prevailing for lower ionic strength, where adsorbing molecules significantly penetrate the fuzzy polymeric layer on the latex core and (ii) the side-on adsorption mechanism prevailing for pH > 5.8 and a higher ionic strength of 0.15 M. It was also shown that in the latter case, variations in the zeta potential with the protein coverage could be adequately described in terms of the electrokinetic model, previously formulated for planar substrate adsorption. On the basis of these experimental data, an efficient procedure of preparing fibrinogen-covered latex particles of controlled monolayer structure and coverage was envisaged.