大景深多重全息术及其应用

提出并实现服用一般Ｈｅ－Ｎｅ激光器记录的大景攀重全息术，这种技术是根据光源时间相干性的特点，在参考光上作光路补偿来扩大景深，并用旋转光楔调制两平面参考波，记录大景深物场的多重全息图，这是一种重像数可以选择的大景深多重全息术，文中给出理论分析和实验结果，理论分析与实验结果是吻合的，文中还提出了用旋转光楔实现多路多参考光编码记录的多通道大景深全息干涉计量术，这种技术可用于研究大景深物场的时间序列动态过     

Interferometric testing of the spacing error of a plane diffraction grating

Two measuring methods of the plane diffraction grating spacing error are presented in this work. The first one resembles real- time holographic interferometry. The hologram is exposed when an object beam is the nth diffraction order, and is then illuminated by the -nth diffraction order wave. The second method makes use of double-exposure holographic interferometry. The first exposure is performed when the nth diffraction order is an object beam. During the second exposure the -nth diffraction order is an object beam. Both methods allow to measure the spacing error separately, not only from the grating surface error but also from the aberrations introduced by the other optical elements of the set-up.     

Dual hologram interferometry

This report describes dual hologram interferometry, a new electro-optic technique used to calculate two-dimensional density distributions from measurable changes in index of refraction. Using this technique, two scenes recorded at different times are stored in separate holograms. One hologram contains reference data depicting the subject in an undisturbed state and the other hologram describes the same subject in a test or disturbed condition. Desired interference patterns are obtained by super-imposing the two separate scenes which are simultaneously reconstructed from each hologram. Specific interferograms, infinite fringe and various finite fringe patterns, are obtained by carefully regulating the optical attitude between the holograms and the reference beam during reconstruction of the scenes. In this project, dual hologram interferometry is used to describe quantitatively free convection from a uniformly heated right circular cylinder. Temperature distributions through the boundary layer and local heat transfer coefficients are determined at different azimuth positions. The results are compared both to experimental data obtained from another holographic technique and to a theoretical prediction of this specific test. This investigation shows that dual hologram interferometry accurately records changes in index of refraction which means the technique can be used to accurately measure experimental fluid flow data.     

Single-shot phase-shifting digital holography with a photon-sieve-filtering telescope

A method of single-shot phase-shifting digital holography with a photon-sieve-filtering telescope is proposed. Three copy images with different phases are first generated by use of a monofocal photon-sieve filter in Kepler telescope, and then interfere with the reference plane wave by a beam combiner. The hologram is captured by a charge-coupled device(CCD)in one single exposure. The complex-valued amplitude of the test object can be reconstructed by three-step phase-shifting interferometry through three frames of extracted sub-interferograms from the single-exposure hologram. The principle and simulation experiments are carried out and verified the validity of our proposed method. This method can be applied for snapshot imaging and three-dimensional object construction.     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级干扰,提高重建像质量,一种方法利用空间光调制器相移技术在参考光中加入一次任意相移,记录两幅数字全息图,消除重建零级像|另一种方法使用“无干扰全息图”消除重建零级像及共轭像.本文讨论结果可为大物体彩色数字全息及多波长数字全息检测应用提供有益的参考.     

Real-time and two-reference-beam hologram interferometry: effects of emulsion shrinkage

When transmission holograms are recorded on photographic materials, any change in the thickness of the photographic emulsion due to processing can produce a change in the spacing of the carrier fringes. We show that the resulting change in the angle at which the image is reconstructed when the hologram is illuminated with the original reference beam can give rise to significant errors in real-time and two-reference-beam hologram interferometry.     

Multiplexed phase-conjugate holographic data storage with a buffer hologram

We describe and demonstrate a volume holographic storage system in which a phase-conjugate object beam is reconstructed by the same reference beam that was used for recording. An intermediate hologram is used as a temporary buffer, recorded with its own reference beam and the data-bearing object beam. Reading this buffer hologram with the phase conjugate of its reference beam reconstructs the phase conjugate of the object beam, which can then be recorded into the desired volume hologram for long-term storage. This method combines the immunity to lens aberrations provided by phase-conjugate readout with the simplicity of using the same multiplexed reference beam for both recording and readout. Only a single pair of phase-conjugate reference beams is required. Experimental results are shown with a single LiNbO(3):Fe crystal used as both buffer and storage holograms and a self-pumped phase-conjugate mirror in BaTiO(3) that provides the pair of phase-conjugate reference beams.     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级...     

Digital holographic interferometry based on wavelength and angular multiplexing for measuring the ternary diffusion

We present a novel method for dynamical measurement of the ternary diffusion by using digital holographic interferometry based on wavelength and angular multiplexing techniques. Two laser beams with different wavelengths (λ1=532 nm and λ2=473 nm) are used for the ternary diffusion measurement, and they are adjusted to make corresponding interference fringes in orthogonal directions on the CCD target. The orthogonal splitting of the fringes enables the spatial frequencies of each wavelength to be filtered separately in the Fourier spectrum of the hologram. Finally, they are reconstructed to obtain the molar concentration. This method is also suitable for two-phase diffusion measurement.     

Holographic recording with a spatially incoherent imagery process

The method described consists of using the transfer properties of a classical imaging system in order to record a hologram of a two on three dimensional object. The object is illuminated by a spatially incoherent beam coming from a white light source through a holographic transparency.     

物光的偏振性对全息记录质量的影响

通过对菲涅耳三维漫反射全息记录光路中物光与参考光偏振状态的实验检测，发现线偏振的激光被不同表面材料的物体散射和漫反射后变成“部分偏振光”，几乎所有目标物都有显著的消偏振现象，全息干板上实际记录的是线偏振的参考光与“部分偏振”的物光形成的相干度较低的干涉条纹。物光偏振度的大幅度下降影响干涉条纹的衬比度，并增加全息图的噪声。给出实验方案和检测光路，采用在参考光路中插入1/4波片的方法，可充分利用非偏振物光各个振动方向的光能，提高条纹的衬比度。     

Parallel phase-shifting dual-illumination phase unwrapping

We propose a single-shot phase unwrapping technique using a single wavelength and parallel phase-shifting interferometry. In the proposed technique, an object is illuminated by two laser beams, which are emitted from the same laser, and have different illumination angles and polarizations. Two types of object waves generated by the two beams are separately and simultaneously recorded by a polarization-imaging camera. In the path of the reference wave, an array of phase retarders is placed to implement the parallel phase-shifting technique. A highly accurate three-dimensional shape is reconstructed from a single hologram. We numerically simulated the proposed technique and conducted a preliminary experiment to verify its effectiveness. It was confirmed that millimeter-order height, which was several thousand times the wavelength of the laser, can be reconstructed by the proposed technique without wrapping.     

Formation of the holographic image of a diffuse object in second-harmonic radiation generated by a nonlinear medium

Results of experiments on recording three-dimensional holographic images of extended diffuse objects using an SHG hologram generating the second harmonic are presented. In this case, the object image is formed by the second-harmonic radiation whose wavelength is smaller than the wavelength of object and reference waves recorded on a hologram by a factor of two. Elements of the theory of an SHG hologram are considered. A holographic image of a transparency object illuminated with diffuse light is obtained. It is shown that the resolving power of this image is close to the limit determined by diffraction effects. An experiment on defocusing the reconstructed image showed that it was localized in one spatial plane and, therefore, was three-dimensional.     

超短脉冲数字全息术中的立体角分复用技术

将角分复用技术应用于超短脉冲数字全息术，可实现对超快过程的动态记录.其中，在角分复用的设计中，由于CCD像素尺寸的限制，一般对物光和参考光的角度要求较为苛刻.为此，提出了一种立体角分复用的方法，并使用连续激光数字全息实验验证了这种方法的有效性.在此基础上，根据超短脉冲数字全息术记录超快过程的特点，设计了能够实现自动连续进行立体角分复用记录的光路.计算分析表明，该光路可在一帧数字全息图上连续记录间隔为纳秒量级的多幅超快过程的动态图像. 关键词： 超短脉冲数字全息术 立体角分复用 超快过程     

Investigation of a dual-layer structure using vertical scanning interferometry

This paper proposes a method based on white light vertical scanning interferometry (VSI) to investigate a dual-layer structure. The optical arrangement is based on a modified Michelson interferometer that utilizes a reference beam and two object beams. Each object beam interferes with the reference beam and produces an interferogram. A series of interferograms are obtained on a dual-layer structure and the thickness of each layer is obtained. A continuous wavelet transform (CWT) is used to extract the envelope of each interferogram in order to determine the peak intensity that provides an indication of each layer's boundary. Tests are conducted on a semiconductor wafer and a micro-gear made of polymeric material deposited on a metal substrate. Results show that the proposed method has a good potential for investigating a dual-layer micro-structure.     

High-resolution digital transmission microscopy—a Fourier holography approach

A spherical reference field is used to construct a digital holographic system with a demonstrated resolution up to 228 line pairs per mm. The reference field originates from a GRIN lens placed 1 mm from the illuminated object. This allows the use of a standard sensor to record the hologram with the required numerical aperture. The image is determined by evaluation of the Rayleigh–Sommerfeld diffraction integral that relates the object field in the image plane to the object field in the sensor plane. Experimental results are given for two charge coupled device sensors and one complementary metal-oxide-semiconductor active pixel sensor.     

The separation of out-of-plane displacement from in-plane components by fringe carrier method based on large image-shearing ESPI

A fringe carrier method for separating out-of-plane displacement from in-plane components based on large image-shearing electronic speckle pattern interferometry (ESPI) is presented. If the test object is respectively illuminated by two expanded symmetric illuminations in large image-shearing ESPI, two interferometers are formed. Carrier fringe patterns can be introduced by tilting reference surface a small angle. The carrier fringe patterns are demodulated after deformation of the object. Two phase maps, which include out-of-plane and in-plane displacement, can be obtained by using Fourier transform. Then out-of-plane displacement can be easily separated from in-plane displacement by simple operation between two unwrapped phase distributions. The principle of spatial carrier frequency modulation in large image-shearing ESPI is discussed. A typical three-point-bending experiment is completed. Experimental results are offered. The results show that the method offers high visibility of carrier fringes. And the system presented does not need a special beam as a reference light and has simple optical setup.     

New multiplexed system for synchronous measurement of out-of-plane deformation and two orthogonal slopes

We propose a novel system for synchronous measurement of out-of-plane deformation and two orthogonal slopes using a single camera. The linearly polarized reference beam introduced by an optical fiber interferes with the unpolarized object beam to measure the out-of-plane deformation. A modified Mach—Zehnder interferometer is used to measure the two orthogonal slopes of the out-of-plane deformation. One of the object beams of the Mach—Zehnder interferometer is an unpolarized beam, and the other object beam is split into two orthogonal linearly polarized object beams by a polarizing prism. The two beams are orthogonally polarized. Hence, they will not interfere with each other. The two polarized beams respectively interfere with the unpolarized beam to simultaneously measure the two orthogonal slopes of the out-of-plane deformation. In addition, the imaging lens and apertures are respectively placed in three optical paths to independently control the carrier frequencies and shearing amounts. The effectiveness of this method can be proved by measuring two pressure-loaded circular plates.     

Digital off-axis holography without zero-order diffraction via phase manipulation

By means of manipulating the phase information of the object beam in an off-axis digital holographic setup, we show that it is possible to fully eliminate the zero-order diffraction (ZOD) from numerically reconstructed holograms. Two different approaches are presented. In the first method, we introduce a ground glass on the object path beam to provide a random phase illumination. The subtraction between two holograms recorded with different positions of the ground glass yields a ZOD free hologram. In the second approach, a piece of window glass inserted on the path of the object beam produces a constant phase shift. The subtraction of two holograms, one recorded with and one without window glass generates a new hologram whose numerical reconstruction is ZOD free. Theoretical models and experimental results are shown to validate our proposals. They show that the proposed methods totally remove the ZOD without ruining the object information.     

Design of the spatial filter window for digital holographic convolution reconstruction of object beam field

In the convolution reconstruction process of digital holographic object beam field, the object beam fields with different magnifications can be obtained when the reconstructing beams are spherical waves with different wave curvature radii. This paper presents a theoretical and experimental discussion on the useful spatial frequency spectrum of the hologram numerically illuminated by the spherical wave. The result shows that there would be an image in the spatial frequency spectrum of digital hologram, which is completely the same as the object, if the wave surface radius of the spherical wave is equal to the distance from the object to the CCD sensor. Taking this image as a reference and designing a filter, the position of the reconstructed images with different magnifications can be predicted correctly in the reconstructed plane. Additionally, since the spectrum distribution of zero-order diffraction can be forecasted accurately in theory, its contribution can be effectively eliminated through changing the spatial filter shape; then a reconstructed object field containing more high-frequency information can be obtained.