Salt effect on the complex formation between polyelectrolyte and oppositely charged surfactant in aqueous solution

The complex formation between sodium carboxymethylcellulose (NaCMC) and dodecyltrimethylammonium bromide (DTAB) at various sodium bromide concentrations (C(NaBr)) has been studied by microcalorimetry, turbidimetric titration, steady-state fluorescence measurements, and the fluorescence polarization technique. The addition of salt is found to influence the formation of NaCMC/DTAB complexes markedly. At C(NaBr) = 0.00, 0.01, 0.02, 0.10, and 0.20 M, DTAB monomers form micelle-like aggregates on NaCMC chains to form NaCMC/DTAB complexes above the critical surfactant concentration (C1). At C(NaBr) = 0.23 M, DTAB molecules first form micelles above a 2.46 mM DTAB concentration prompted by the added salt, and then, above C1 = 4.40 mM, these micelles can aggregate with NaCMC chains to form NaCMC/DTAB complexes. However, at C(NaBr) = 0.25 M, there is no NaCMC/DTAB complex formation because of the complete salt screening of the electrostatic attraction between DTAB micelles and NaCMC chains. It is also surprisingly found that the addition of NaBr can bring out a decrease in C1 at C(NaBr) < 0.20 M. Moreover, the addition of NaBr to a mixture of 0.01 g/L NaCMC and 3.6 mM DTAB can directly induce the formation of NaCMC/DTAB complexes. This salt-enhancing effect on the complex formation is explained as the result of competition between the screening of interaction of polyelectrolyte with surfactant and the increasing of polyelectrolyte/surfactant interaction owing to the growth of micelles by added salt. When the increasing of polyelectrolyte/surfactant interaction exceeds the screening of interaction, the complex formation can be enhanced.     

A spectral approach to determine location and orientation of azo dyes within surfactant aggregates

The UV–vis absorption properties of azo dyes are known to exhibit a variation with the polarity and acidity of the dye environment. The spectral properties of a series of anionic azo dyes were characterized to further probe the interaction of these dyes with two types of surfactant aggregates: (1) the spherical micelles formed in aqueous solution by alkyltrimethylammonium bromide (C_nTAB) surfactants with n = 10–16 and (2) the unilamellar vesicles spontaneously formed in water from binary mixtures of the oppositely-charged double-tailed surfactants cationic didodecyldimethylammonium bromide (DDAB) and anionic sodium dioctylsulfosuccinate (Aerosol OT or AOT). The observed dye spectra reflect the solvatochromic behavior of the dyes and suggest the location and orientation of the dye within the surfactant aggregates. Deconvolution of the overall spectra into sums of Gaussian curves more readily displays any contributions of tautomeric forms of the azo dyes resulting from intramolecular hydrogen bonding. The rich variation in UV/vis absorption properties of these anionic azo dyes supports their use as sensitive tools to explore the nanostructures of surfactant aggregates.     

Measurement and modelling of mean activity coefficients of aqueous mixed electrolyte solution containing glycine

Electrochemical measurements were made on (H₂O + NaBr + K₃PO₄ + glycine) mixtures at T = 298.15 K by using ion selective electrodes. The mean ionic activity coefficients of NaBr at molality 0.1 were determined at five K₃PO₄ molalities (0.01, 0.03, 0.05, 0.07, and 0.1) mol · kg⁻¹. The activity coefficients of glycine were evaluated from mean ionic activity coefficients of NaBr. The modified Pitzer equation was used to model the experimental data.     

Interaction and solubilization of some phenolic antioxidants in Pluronic® micelles

The solubilization of four phenolic antioxidants, namely p-hydroxybenzoic acid (PHBAA), syringic acid, sinapic acid, and quercetin in micelles of an ethylene oxide (EO)–propylene oxide (PO) triblock copolymer Pluronic^® P104 (EO₂₇–PO₆₁–EO₂₇, PPO mol wt = 3540, % PEO = 40) was examined at different temperatures, pHs, and in the presence of sodium chloride. The nano-size core–shell micelles of P104 characterized by dynamic light scattering had hydrodynamic diameter of about 18–20 nm with low polydispersity. Antioxidants induced micellization and micellar growth were observed. The critical micellar concentration (CMC), critical micellar temperature (CMT), cloud point (CP) of P104 decreased due to solubilization and interactions of antioxidants. The solubilization was favored at higher temperature, pH and in the presence of salt and follows the order PHBA > syringic acid > sinapic acid > quercetin which corresponds to the trend in their aqueous solubility. The location of antioxidant in micelles observed from NOESY spectra. Structure and hydrophobicity of antioxidants were found to be governing factors for their interaction and location in the micelles.     

Kinetics and mechanism of the reduction of colloidal MnO2 by glycyl-leucine in the absence and presence of surfactants

The kinetics of the reduction of water-soluble colloidal manganese dioxide by glycyl-leucine (Gly-Leu) has been investigated in the presence of perchloric acid both in aqueous as well as micellar media at 35 °C. The study was carried out as functions of [MnO₂], [Gly-Leu] and [HClO₄]. The first-order-rate is observed with respect to [MnO₂], whereas fractional-order-rates are determined in both [Gly-Leu] and [HClO₄]. Addition of sodium pyrophosphate and sodium fluoride enhanced the rate of the reaction. Further, the use of surfactant micelles is highlighted as, in favourable cases, the micelles help the redox reactions by bringing the reactants into a close proximity due to hydrogen bonding. While the ionic surfactants SDS and CTAB have not shown any effect on the reaction rate, the nonionic surfactant TX-100 has catalytic effect which is explained in terms of the mathematical model proposed by Tuncay et al. (1999). The Arrhenius and Eyring equations are valid for the reaction over the range of temperatures used and different activation parameters (E_a, ΔH^#, ΔS^# and ΔG^#) have been evaluated. Kinetic studies show that the redox reaction between MnO₂ and Gly-Leu proceeds through a mechanism combining one- and two-electron pathways: Mn(IV) → Mn(III) → Mn(II) and Mn(IV) → Mn(II). On the basis of the observed results, a possible mechanism has been proposed and discussed.     

Effects of micelle-to-vesicle transitions on the degree of counterion binding

Effects of micelle-to-vesicle transitions on the degree of counterion binding (beta) were investigated on three systems. For the concentration-dependent micelle-to-vesicle transition in the didodecyldimethylammonium bromide (DDAB)/water system, in the region of coexistent micelles and vesicles, less than 3 mM, the beta values increased significantly with DDAB concentration: beta (0.07 mM)=0.35 and beta (3 mM)=0.93. In the coexistent region, activities of the bromide ion, a(Br), were almost independent of the DDAB concentration, suggesting the pseudo-phase nature of both micelles and vesicles. In the concentration-dependent vesicle-to-lamellar transition region above 5 mM, where multilamellar vesicles were prevailing, on the other hand, the beta values were only little affected by this transition. This suggests that the increase in the layer number of DDAB multilamellar vesicles scarcely affects the beta values. This was also supported by the fact that the destruction of multilamellar vesicles by ultrasonication did not change the beta values. These results strongly suggest that the inner and outer monolayers of DDAB multilamellar vesicles are characterized by similar beta values. The second system, cetyltrimethylammonium bromide (CTAB)/DDAB mixtures, showed composition-dependent transitions depending on the mole fraction of DDAB X(DDAB): spherical micelles (0rodlike micelles (0.2vesicles (0.6相似文献   

Salt effect on complex formation of neutral/polyelectrolyte block copolymers and oppositely charged surfactants

The salt effect on the complex formation of poly(acrylamide)- block-poly(sodium acrylate) (PAM- b-PAA) as a neutral-anionic block copolymer and dodecyltrimethylammonium bromide (DTAB) as a cationic surfactant at different NaBr concentrations, CNaBr, was investigated by turbidimetric titration, steady-state fluorescence spectroscopy, and dynamic light scattering. At C NaBr < 0.25 M, DTAB molecules may form micelle-like aggregates on PAM- b-PAA chains to form a PAM- b-PAA/DTAB complex above the critical surfactant concentration C critical for the onset of complex formation. In the region of relatively high turbidity, a larger complex is likely to form a core-shell structure, of which the core is a dense and disordered microphase made of surfactant micelles connected by the PAA blocks. The corona was a diffuse shell of PAM chains, and it ensured steric stability. At CNaBr = 0.25 M, a higher electrostatic intermicellar repulsion and intercomplex repulsion induced by a large amount of bound DTAB micelles may lead to a redissolution of large colloidal complexes into intrapolymer complexes. Moreover, a salt-enhancing effect on the complex formation was observed in the PAM- b-PAA/DTAB system; the critical surfactant concentration decreased with increasing salt concentration at CNaBr < 0.10 M. The salt-enhancing effect is due to the larger increase of interaction in comparison to the screening of the interaction.     

Multi-technique approach on the effect of surfactant concentrations on the thermal unfolding of rabbit serum albumin: Formation and solubilization of the protein aggregates

Effect of cationic surfactant, cetyltrimethylammonium bromide (CTAB) addition on the thermal denaturation of rabbit serum albumin (RSA) has been studied by employing small-angle neutron scattering (SANS), circular dichroism (CD), intrinsic fluorescence and ultra violet (UV) spectroscopy. The studies were performed at three different temperatures viz., 30, 50 and 70 °C and at two different concentrations of CTAB: the low concentration of CTAB used was 1 mM and the higher concentration was 80 mM (for SANS) and 20 mM (for CD, fluorescence and UV). A collective effect of high temperature and low concentration of CTAB led to the protein aggregation followed by solubilization of these aggregates at higher concentration of surfactant. At 1 mM CTAB and 30 °C, the protein–surfactant complex has a prolate ellipsoidal shape with semi-major axis of 88.9 Å and semi-minor axis of 19.6 Å which are slightly greater than the values of the native RSA. At 50 °C, the size of the semi-major axis increases while at 70 °C an increase in the size of both axes was found. The thermal outcome at higher concentration of CTAB (80 mM) was rather different. Higher concentration of CTAB unfolds the protein by the formation of micelle-like aggregates along the polypeptide chains of the protein and the complex was stabilized at higher temperatures, which was not found with lower concentration of CTAB. The CD results were found to be consistent with the SANS results, i.e., decrease in α-helicity of RSA was more when less amount of surfactant was present as compared to the system with higher surfactant concentration. In a similar fashion, results of relative fluorescence intensity (RFI) reveal that increase in temperature causes decrease in λ_max of native RSA as well as RSA + 1 mM CTAB, whereas the λ_max remains unchanged for RSA + 20 mM CTAB systems. That means the structure remains compact in presence of 20 mM CTAB while the structure becomes loose when low or zero amount of surfactant was present. The UV results indicate that the protein aggregation takes place in presence of low amount of CTAB and these aggregates become soluble at high concentration of CTAB.     

Kinetics of the diazotization and azo coupling reactions of procaine in the micellar media

The kinetics of the diazotization reaction of procaine in the presence of anionic micelles of sodium dodecyl sulfate (SDS) and cationic micelles of cetyltrimethyl ammonium bromide (CTAB), dodecyltrimethyl ammonium bromide (DDTAB) and tetradecyltrimethyl ammonium bromide (TDTAB) were carried out spectrophotometrically at λ_max = 289 nm. The values of the pseudo first order rate constant were found to be linearly dependent upon the [NaNO₂] in the concentration range of 1.0 × 10⁻³ mol dm⁻³ to 12.0 × 10⁻³ mol dm⁻³ in the presence of 2.0 × 10⁻² mol dm⁻³ acetic acid. The concentration of procaine was kept constant at 6.50 × 10⁻⁵ mol dm⁻³. The addition of the cationic surfactants increased the reaction rate and gave plateau like curve. The addition of SDS micelles to the reactants initially increased the rate of reaction and gave maximum like curve. The maximum value of the rate constant was found to be 9.44 × 10⁻³ s⁻¹ at 2.00 × 10⁻³ mol dm⁻³ SDS concentration. The azo coupling of diazonium ion with β-naphthol (at λ_max = 488) nm was found to linearly dependent upon [ProcN₂⁺] in the presence of both the cationic micelles (CTAB, DDTAB and TDTAB) and anionic micelles (SDS). Both the cationic and anionic micelles inhibited the rate of reactions. The kinetic results in the presence of micelles are explained using the Berezin pseudophase model. This model was also used to determine the kinetic parameters e.g. k_m, K_s from the observed results of the variation of rate constant at different [surfactants].     

Catalytic effect of CTAB on the interaction of dipeptide glycyl-tyrosine (Gly-Tyr) with ninhydrin

The effect of cationic micelles of cetyltrimethylammonium bromide (CTAB) on the interaction of dipeptide glycyl-tyrosine (Gly-Tyr) with ninhydrin under varying conditions has been studied spectrophotometrically at 70 °C and pH 5.0. The reaction followed first- and fractional-order kinetics with respect to [Gly-Tyr] and [ninhydrin], respectively. Increase in total concentration of CTAB from 0 to 70 × 10⁻³ mol dm⁻³ resulted in an increase in the pseudo-first-order rate constant (k_ψ) by a factor of ca. 3. Quantitative kinetic analysis of k_ψ − [CTAB] data was performed on the basis of pseudo-phase model of the micelles (proposed by Menger and Portnoy and developed by Bunton) and Piszkiewicz model. A possible mechanism has been proposed and the kinetic data have been used to evaluate the micellar binding constants K_S (268 mol⁻¹ dm³ for Gly-Tyr) and K_N (64 mol⁻¹ dm³ for ninhydrin).     

Silver nanoplates and nanowires by a simple chemical reduction method

The critical micelle concentration (cmc) of an amphiphilic drug amitriptyline hydrochloride (AMT) was determined in the presence of varying amounts of inorganic salts (NaF, NaCl, NaBr, LiCl, KCl), urea and thiourea over the temperature range 293–308 K by conductometric and dye solubilization (ambient) techniques. The cmc values showed an inverted U-shaped behavior with temperature. In the presence of salts the cmc decreased which is explained on the basis of the nature and ion size. Urea and thiourea, at low concentrations (0.2 mM urea and 0.1 mM thiourea), decreased the cmc, whereas, at high concentrations, increase was observed with both the additives. Relevant thermodynamic parameters were also evaluated and discussed.     

Cloud point extraction for determination of cadmium in soft drinks by thermospray flame furnace atomic absorption spectrometry

Cloud point extraction (CPE) is proposed as a preconcentration procedure for the determination of Cd in soft drinks by thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS). The cadmium reacted with pyridyl-azo-naphthol (PAN) to form hydrophobic chelates, which were extracted into the micelles of Triton X-114 in a solution buffered at pH 9. NaCl was used for the phase separation. The variables which affect the preconcentration were optimized using a 2³ factorial design and central composite design (CCD). A response surface maximum point was obtained, and the critical values were a concentration of 0.13 mmol L^? 1 PAN, 0.03% m/v Triton X-114 and 2.3% m/v NaCl. Under the optimized conditions, after the extraction and preconcentration steps, a sample volume of 100 μL was introduced into the hot Ni tube using water as the carrier at a flow rate of 0.4 mL min^? 1. The values obtained for the detection limit, relative standard deviation and preconcentration factor were 0.0178 μg L^? 1, 4.1% (n = 8) and 55.5, respectively. The accuracy of the proposed method was demonstrated by performing addition-recovery experiments. Recoveries varied from 88 to 104%.     

Spectral studies of Fe(III) complexes of dipodal tridentate chelating agents

The dipodal ligands (Im) and (BIm) as well as complexes [FeLCl₃] [L = Im (1) and BIm (2)] have been prepared and studied using spectroscopic techniques. The magnetic moment, IR, electronic (ligand field), FAB-mass and NMR spectral data indicate a hexa-coordinate geometry around high-spin state Fe³⁺ where the ligands coordinate as a tridentate [N,N,N] chelating agent. ⁵⁷Fe-Mössbauer spectral data confirmed the presence of a ligand asymmetry around Fe³⁺ in a high-spin state electronic configuration (t_2g³,e_g², S = 5/2) with nuclear transition Fe(±3/2 → ±1/2) exhibiting Kramer's double degeneracy. The molecular computations provided the optimum energy perspective plots for the molecular geometries giving the important structural data.     

Conformational and stereoelectronic investigation of chloromethyl methyl sulfide and its sulfinyl and sulfonyl analogs

Three compounds based on polyoxometalate building blocks, [Cu(en)₂]{[Cu(en)₂]₂[Mo^VI₅Mo^V₃V^IV₈O₄₀(PO₄)]} · 4H₂O (1), [Co(en)₂]{[Co(en)₂]₂[HMo^VI₄Mo^V₄V^IV₈O₄₀(PO₄)]} · 5H₂O (2) and [Ni(en)₂]{[Ni(en)₂]₂[Mo^VI₅Mo^V₃V^IV₈O₄₀(VO₄)]} · 2H₂O (3) (en = ethylenediamine), have been synthesized and characterized by elemental analysis, IR, XPS, XRD, TGA and single-crystal X-ray diffraction analysis. The result of structure determination shows that isomorphic compounds 1, 2 and 3 feature a one-dimensional chain built from the reduced tetra-capped pseudo-Keggin polyoxoanion, which is further interconnected by [M(en)₂]²⁺ (M = Cu, Co and Ni) groups via the terminal oxygen atoms of polyoxoanions. The crystal data for these compounds are the following: 1, monoclinic, space group C2/c, a = 26.702(3) Å, b = 13.4539(14) Å, c = 19.5987(19) Å, β = 108.650(2)°, V = 6671.0(12) Å³, Z = 4; 2, monoclinic, space group C2/c, a = 26.244(3) Å, b = 13.5070(17) Å, c = 19.581(3) Å, β = 106.881(2)°, V = 6641.8(15) Å³, Z = 4; 3, monoclinic, space group C2/c, a = 26.2789(15) Å, b = 13.5408(6) Å, c = 19.6312(9) Å, β = 106.2590(10)°, V = 6706.1(6) Å³, Z = 4. Variable-temperature magnetic susceptibility measurements of compounds 1 and 3 reveal the feature of antiferromagnetic exchange in these compounds.     

Supramolecular assembly of 2,4,5-trifluorobenzoate complex based on weak interactions involving fluorine atoms

The complex[Cd（tfbz）₂（phen）]₂（1）（tfbz = 2,4.5-trifluorobenzoate,phen = 1,10-phenanthro-line） was synthesized using trifluorobenzoic acid ligand.The single-crystal structure of 1 has been determined by X-ray crystallography.The packing structure is characterized by the formation of an intricate threedimensional supramolecular network that depends on the C-H…F,F…F,F（lp）…π（1p = lone pair） interactions.     

Spontaneous vesicle formation of single chain and double chain cationic surfactant mixtures

The concentration vs composition diagram of aggregate formation of the dodecyltrimethylammonium bromide (DTAB) and didodecyldimethylammonium bromide (DDAB) mixture in aqueous solution at rather dilute region was constructed by analyzing the surface tension, turbidity, and electrical conductivity data and inspected by cryo-TEM images and dynamic light scattering data. Although the aqueous solution of DTAB forms only micelles, the transition from monomer to small aggregates and then to vesicle was found at 0.1 < X2 相似文献   

Multiwavelength spectrophotometric determination of acidity constants of 1-（2-thiazolylazo）-2-naphthol in methanol-water mixtures

The acid-base properties of 1-(2-thiazolylazo)-2-naphthol (TAN) in mixtures of methanol-water at 25℃and an ionic strength of 0.1 mol/L are studied by a multi-wavelength spectrophotometric method.The acidity constants of all related equilibria are estimated using the whole spectral fitting of the collected data to an established factor analysis model DATAN program was used for determination of acidity constants.The corresponding pK_a values in methanol-water mixtures were determined.There is a linear relationship between acidity constants and the mole fraction of methanol in the solvent mixtures.     

Synthesis and characterization of a tetranuclear copper(Ⅱ) complex with a chiral Schiff base ligand

The title complex l-[Cu^Ⅱ₄（Hvap）₂（vap）₂（MeOH）₂]（CIO₄）₂ 1 has been synthesized and characterized by EA. IR,TGA,solid-state CD spectra and X-ray single-crystal analyses（l-H₂vap’.a Schiff base ligand derived from the condensation of o-vanillin and l-2-amino-3-phenyl-l-propanol）.Complex 1 crystallizes in monoclinic system,chiral space group P2₁ with a =10.4257（18）.b = 21.695（4）,c = 15.721（3）A,β= 94.443（3）.V= 3545.1（11） ³,Z=2,Cu₄C₇₀H₇₈N₄O₂₂Cl₂.Mr= 1652.42,D_c= 1.548 g/cm³, F（000）= 1704 andμ（MoKα） = 1.338 mm^-1.The final R = 0.0682 and wR = 0.1420 for 6170 observed reflections with I > 2σ（I） and R = 0.1775 and wR = 0.1830 for all data.The structure of complex 1 contains a boat-shaped(Cu₄O₄} motif.The solid-state CD spectra confirm the chiral nature of complex 1.