Approaches for Generating Mesoscale Patterns of Semiconductor Nanoclusters

In this review, existing approaches for the manipulation and/or construction of isolated semiconductor nanoclusters into deliberate, patterned arrays are described. Diverse examples of different strategies from solid state, solution, and hybrid combinations are described as well as successes achieved to date. The approaches to be discussed include conventional solid state lithography, volumetric constriction of monodisperse nanoclusters deposited from solution, and the use of anchored macromolecular templates to direct semiconductor nanocluster assembly.     

Correlating sideband patterns with powder patterns for accurate determination of chemical shift parameters in solid-state NMR

Powder patterns and sideband patterns have different strengths when it comes to using them to determine chemical shift parameters. Here, we show that chemical shift parameters can be determined with high accuracy by analysing the correlation pattern from a 2D experiment which correlates a powder pattern in the indirect dimension with a sideband pattern in the direct dimension. The chemical shift parameters so determined have greater accuracy than those obtained by analysing a sideband or powder pattern alone, for the same signal-to-noise ratio. This method can be applied for both resolved correlation patterns and to cases where two components share similar isotropic chemical shifts. The methodology is demonstrated in this paper, both theoretically and experimentally, on the (31)P signals of the bis-phosphonate drug, pamidronate.     

Reactivity in radical polymerization: Beyond the Q-e scheme

The Q-e and Patterns of Reactivity Schemes for the quantitative treatment of the reactions of polymer radicals with monomers and transfer agents are discussed, and two revised versions of the Patterns Scheme are presented, in which all the necessary parameters are derived from experimental data on polymerizations. The new schemes provide significantly more accurate assessments of monomer reactivity ratios than do their predecessors. © 1996 John Wiley & Sons, Inc.     

Exhaustive analysis of frontal copolymerization of functionalized monovinyl and divinyl monomers

A series of copolymers of 2-hydroxyethyl methacrylate (HEMA)/glycidyl methacrylate (GMA) and ethylene dimethacrylate (EGDM) were synthesized by frontal polymerization (FP). This study was conducted to investigate the effect of crosslink density, type and concentration of initiator, the use of a complex initiator system, porogen, and diluent on the most relevant parameters of FP, such as sustainability of the front, temperature profile, front velocity, and yield. The products were also characterized for intruded pore volume, pore-size distribution, epoxy-functionality number, and surface morphology. Higher crosslink densities (CLDs) and initiator concentration produced higher front velocities, whereas no trend in front temperature was noted. A complex initiation system was effective in stabilizing and increasing the polymerization yield. Relative to suspension polymerization (SP), FP products synthesized without a solvent were microporous, whereas micro-to-macroporous products were obtained in the presence of a solvent (for HEMA-EGDM polymers). We also present, explain, and discuss the exotic patterns observed under a microscope. We observed two basic types of spatial patterns, namely, planar and nonplanar patterns. The type of planar pattern observed under scanning electron microscopy (SEM) has a spatial impulse that appears as a loop followed by regular periodic motion in the radial and axial directions. This behavior gives rise to a repeating pattern that is a few microns thick. Also, nonplanar patterns, namely, layered concentric rings and winding staircase patterns, were observed under SEM.     

UV‐Triggered Surface‐Initiated Polymerization from Colorless Green Tea Polyphenol‐Coated Surfaces

A facile and versatile approach to constructing colorless surface coatings based on green tea polyphenols is reported, which can further act as a photoinitiating layer to initiate radical polymerization. These colorless green tea polyphenol coatings are capable of successfully photografting polymer brushes, and the resulting polymer brush patterns show spatial shape adjustability by masked UV irradiation. Both surface modifications and photografted polymer brushes do not alter the original color of the substrates. This method could be promising for the development of surface modifications.

     

Liesegang图案

介绍了Liesegang图案的生长规律、实验研究方法、形成影响因素、理论进展、应用及存在的问题,同时对当前两个活跃的研究方向即复杂Liesegang环和Liesegang图案的微观形成机制进行了讨论.该领域研究的新突破有助于理解自然界中一些复杂图案的形成和控制材料制备中的自组装结构及动物代谢中的结石生长.     

Polymorphic inclusion structure types of solvated 2,4-dichloro-5-carboxy-benzsulfonimide. A study of solvation patterns and their influence on molecular conformation

The inclusion behavior of 2,4-dichloro-5-carboxy-benzsulfonimide in protic (water, acetic acid and methanol) and aprotic (N,N-dimethylacetamide) environments has been examined by crystal structure determinations of the solvated compound, providing an illustration of the relationship between solvation effects and structural polymorphism. Three different crystal structure types of the corresponding complexes in which the benzsulfonimide moiety, C₁₄H₇Cl₄NO₈S₂, exhibits different conformations have been observed [I (with 4 mol of water) – ,a=8.227,b=8.964,c=16.945 Å, =89.64, =97.51, =114.28°;II (with acetic acid + 2 H₂O) – ,a=7.857,b=11.379,c=13.831 Å, =92.50, =101.21, =101.12° andIII (with methanol + 2H₂O) – orP1,a=7.840,b=11.235,c=13.697 Å, =95.56, =102.05, =102.21°;IV (with 2N,N-dimethylacetamide + 2H₂O) –P2₁2₁2₁,a=14.838,b=14.818,c=14.500 Å]. Crystallization from water and from acetic acid leads to layered structures consisting of alternating zones of the host (with a folded conformation) and the solvent. Crystals obtained fromN,N-dimethylacetamide are composed of a three-dimensional lattice of loosely packed host species (with an extended conformation) which are interspaced by solvent molecules. This polymorphism can be correlated to hydrogen bonding in that the extended conformation of the title compound is favored in a solvent which is a poor hydrogen donor, while the folded conformation is induced in solvation environments that are good donors of hydrogen bonds. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82005 (8 pages). To obtain copies, see p. ii of this issue.     

利用DPN技术直接构建磁性纳米图形

在纳米尺度下构建有序的磁性模板和图形是当前的研究热点之一 [1,2 ] .这种模板在生物样品的分离[1] 、磁电子学研究和信息存储 [2 ] 等领域具有重要意义 .目前 ,光刻 [3] 、微触点印刷 [4 ] 和自组装 [5] 等多项技术已被用来构建各种纳米模板 .1 999年 ,美国西北大学 Mirkin小组 [6 ]发明的 Dip- pen纳米刻蚀技术 (简称 DPN技术 )更在可控组装方面显示出巨大优越性 .这项技术是在一定驱动力作用下 ,使吸附在原子力显微镜 ( AFM)针尖上的分子“墨水”逐渐转移到基底表面上 ,实现纳米模板的可控构建 .与传统技术相比 ,DPN技术可在纳米尺…     

不同酸对介孔二氧化硅球表面形貌和介相结构的影响

在室温、不同酸性条件下合成出微米级球形介孔二氧化硅材料，通过XRD、SEM以及氮气吸附等手段对介孔二氧化硅材料进行了表征。用TEM跟踪不同反应时间介孔二氧化硅球的形成，对这些球颗粒的合成机理进行了讨论，同时探讨了不同酸性条件下介孔二氧化硅表面形貌和介相结构的变化。     

Influence of the surface pretilt angle on spatially periodic deformations in nematic layers

The deformations induced by electric field in twisted or untwisted flexoelectric nematic layers can be homogeneous (i.e. one-dimensional) or spatially periodic (i.e. two-dimensional). The periodic deformations are undesirable from an applicative point of view since they destroy the homogeneous appearance of the area of an excited pixel of a display. They are particularly favoured when the nematic material possesses flexoelectric properties. In order to check whether the unwanted periodic deformations can be eliminated by means of suitable surface pretilt angle, the small deformations arising just above the corresponding threshold voltage were investigated numerically. The nematic materials exhibiting both weak and strong flexoelectricity were taken into account. The surface pretilt angles ranging from 0° to 30° were adopted. It was shown that the periodic patterns, arising in the case of planar surface alignment, disappear if sufficiently large surface pretilt angle is applied.     

Investigations into distribution of lidocaine in human autopsy material

With screening methods in the legal medicine drugs were often detected in autopsy material. In this study the antiarrhythmic and the local anesthetic drug lidocaine could be proved in fifty‐one cases and determined in different autopsy materials. For the first time the comparison of so many distribution patterns of lidocaine in human compartments was possible. A liquid‐liquid extraction procedure, a standard addition method and LC/MS/MS were used for analytics. The measured concentrations in blood were in the therapeutic range or lower. The time between lidocaine application and death was given in twenty‐nine cases. These data were very helpful to estimate and interpret the distribution process of lidocaine between application and death. This time exerted a crucial influence on the distribution of lidocaine in the compartments. Most of the intravenous applicated lidocaine was found in heart blood after a very short time of distribution. Afterwards the highest concentrations were measured in brain. Later the highest concentration was found in the kidney samples or in urine. If the time between lidocaine application and death is known, the results of this study can be used to deepen the knowledge of its pharmacokinetics. If this time is unknown, the circumstances and the causes of death can be better explained. Copyright © 2015 John Wiley & Sons, Ltd.     

Analysis of electrophoretic patterns of arbitrarily primed PCR profiling

We present a mathematical algorithm for the analysis of electrophoretic patterns resulting from arbitrarily primed PCR profiling. The algorithm is based on the established mathematical procedures applied to the analysis of digital images of gel patterns. The algorithm includes (a) transformation of the image into a matrix form, (b) identification of every electrophoretic lane as a set of matrix columns that are further mathematically processed, (c) averaging of matrix columns corresponding to electrophoretic lanes that define lane representatives, (d) elimination of "smiling" bands, (e) solving the problem of a lane offset, and (f) removal of the background. Representation of individual electrophoretic lanes in the form of functions allows interlane comparisons and further mathematical analysis. Direct comparison of selected lanes was obtained by employing correlation analysis. Gel images were those obtained after arbitrarily primed PCR analysis of DNA that underwent damage induced by gamma radiation from a (60)Co source. The applied method proved to be useful for elimination of subjectivity of visual inspection. It offers the possibility to avoid overlooking important differences in case of suboptimal electrophoretic resolution. In addition, higher precision is achieved in the assessment of quantitative differences due to better insight into experimental artifacts. These simple mathematical methods offer an open-type algorithm, i.e., this algorithm enables easy implementation of different parameters that may be useful for other analytical needs.     

二茂铁基苯酰腙的d区金属螯合物的合成和表征

二茂铁基苯酰腙与d区金属乙酸盐或氯化物在乙醇中反应,得到了6个新的螯合物,分子式为M(Fcbh)n[Fcbh=Fc—C=N—N=C-C_6H_5,Fc=C_5H_5—FeC_5H_4;M=Cr(Ⅲ)、Fe(Ⅲ)时,n=3;M=Mn(Ⅱ)、Co(Ⅱ)、Ni(Ⅱ)时,n=2]和Pd(Fcbh—H)_2Cl_2[Fcbh—H=Fc—C=N—NHCOC_6H_5]通过元素分析,红外光谱,H核磁共振谱和质谱,确定了螯合物的组成和结构。描述了二茂铁基苯酰腙配体与d区金属的两种不同的配位方式。     

Photo-Oxidation-Controlled Surface Pattern with Responsive Wrinkled Topography and Fluorescence

Wrinkles and photo-oxidation reactions are widely found in soft materials, which are intimately associated with the failure of materials and structures. It is expected that the photo-oxidation process could also have a positive effect on the material and its surface. Here, we report the photo-oxidation of 2-(4-dietheylaminophenyl)-4,5-bis(4-methoxyphenyl) imidazole (DEA-TAI) into a wrinkled bilayer system to control surface wrinkle and fluorescent patterns, in which a supramolecular polymer network composed of carboxylic acid-containing copolymer (PS-BA-AA; PS=poly(styrene), BA=butyl acrylate; AA=acrylic acid) and DEA-TAI were used as the skin layer. Ultraviolet (UV) irradiation can induce photo-oxidation of the imidazole ring of DEA-TAI to weaken the intermolecular hydrogen bonding between PS-BA-AA and DEA-TAI, resulting in the release of stress in the bilayer system. The wrinkled morphology and fluorescence of the surface can be simultaneously regulated by photo-oxidation of DEA-TAI under UV light, and the resulting wrinkles are extremely sensitive to the pH value, which can be quickly and reversibly erased by NH₃ gas. Smart surfaces with specific hierarchical wrinkles and fluorescence can be achieved by selective irradiation with photomasks, which may find potential applications in smart displays and multi-code information storage.     

Localized electric field induced transition and miniaturization of two‐phase flow patterns inside microchannels

Strategic application of external electrostatic field on a pressure‐driven two‐phase flow inside a microchannel can transform the stratified or slug flow patterns into droplets. The localized electrohydrodynamic stress at the interface of the immiscible liquids can engender a liquid‐dielectrophoretic deformation, which disrupts the balance of the viscous, capillary, and inertial forces of a pressure‐driven flow to engender such flow morphologies. Interestingly, the size, shape, and frequency of the droplets can be tuned by varying the field intensity, location of the electric field, surface properties of the channel or fluids, viscosity ratio of the fluids, and the flow ratio of the phases. Higher field intensity with lower interfacial tension is found to facilitate the oil droplet formation with a higher throughput inside the hydrophilic microchannels. The method is successful in breaking down the regular pressure‐driven flow patterns even when the fluid inlets are exchanged in the microchannel. The simulations identify the conditions to develop interesting flow morphologies, such as (i) an array of miniaturized spherical or hemispherical or elongated oil drops in continuous water phase, (ii) “oil‐in‐water” microemulsion with varying size and shape of oil droplets. The results reported can be of significance in improving the efficiency of multiphase microreactors where the flow patterns composed of droplets are preferred because of the availability of higher interfacial area for reactions or heat and mass exchange.     

Determination of the Uranium(VI) and ‐(IV) Species in Uranium Ores

The determination of the two species of uranium(VI and IV) present in 6 uranium ores was studied in relation to the chemical and mineralogical composition, humidity, and pH of the samples taken over from the mine. X‐ray diffraction studies, performed on the uranium ores in powder form allowed to establish their mineralogical composition. Thechemical analysis pointed out the presence, besides the two uranium species, of some microelements able to influence the U^VI/U^IV ratio in minerals and to leach out U^VI as uranyl ions from the corresponding minerals.     

Sessile nanofluid droplet drying

Nanofluid droplet evaporation has gained much audience nowadays due to its wide applications in painting, coating, surface patterning, particle deposition, etc. This paper reviews the drying progress and deposition formation from the evaporative sessile droplets with the suspended insoluble solutes, especially nanoparticles. The main content covers the evaporation fundamental, the particle self-assembly, and deposition patterns in sessile nanofluid droplet. Both experimental and theoretical studies are presented. The effects of the type, concentration and size of nanoparticles on the spreading and evaporative dynamics are elucidated at first, serving the basis for the understanding of particle motion and deposition process which are introduced afterward. Stressing on particle assembly and production of desirable residue patterns, we express abundant experimental interventions, various types of deposits, and the effects on nanoparticle deposition. The review ends with the introduction of theoretical investigations, including the Navier–Stokes equations in terms of solutions, the Diffusion Limited Aggregation approach, the Kinetic Monte Carlo method, and the Dynamical Density Functional Theory. Nanoparticles have shown great influences in spreading, evaporation rate, evaporation regime, fluid flow and pattern formation of sessile droplets. Under different experimental conditions, various deposition patterns can be formed. The existing theoretical approaches are able to predict fluid dynamics, particle motion and deposition patterns in the particular cases. On the basis of further understanding of the effects of fluid dynamics and particle motion, the desirable patterns can be obtained with appropriate experimental regulations.     

Effect of Boundaries on Pattern Formation in a Monolayer of Interacting Dipoles

Self-organization can be defined as a process of arrangement of entities that start out in an irregular arrangement and evolve into a stable, regular pattern without the aid of an external agent. A system of magnetic particles that are constrained to move only in a plane is reported. The individual components in the system have dipole moments in an orientation perpendicular to the plane of motion and the interaction between components is purely repulsive. For such a system, it is attempted to understand the influence of the boundary of the monolayer on the patterns that emerge. A system with a small number of magnets is found where the range of the magnetic interactions is of the size of the boundary; the symmetry of the boundary imposed on the monolayer plays a crucial role in determining the pattern types, the number of different pattern types, and the frequency of appearance of a particular pattern type. The effect of scaling up the size of the system while maintaining the characteristics of individual components as well as the component areal density is also discussed.     

象山港海底沉积物中重金属的赋存形态

以象山港海底沉积物为研究对象,采用了五步连续萃取法对象山港区域表层沉积物中重金属(Fe、Mn、Cu、Zn)赋存形态进行了研究,分析了各形态重金属在象山港不同采样点中的分布特征和影响因素.结果表明,象山港海域表层沉积物中各重金属元素主要来源于自然输入的残留态,人为输入的各种活性形态所占比例相对较少,但受两种因素的影响的差...     

A Study of Two-Dimensional Microdischarge Pattern Formation in Dielectric Barrier Discharges

Although microdischarges in dielectric-barrier discharges (DBDs) have been studied for the past century, their mutual interaction was explained only recently. This interaction is responsible for the formation of microdischarge patterns reminiscent of two-dimensional crystals. Depending on the application, microdischarge patterns may have a significant influence on DBD performance, particularly when spatial uniformity is desired. This paper presents the results of study of regular microdischarge pattern formation in DBD in air at atmospheric pressure. Experimental images of DBD (Lichtenberg figures) were obtained using photostimulable phosphors. A new method for analysis of microdischarge patterns that allow measuring the degree of pattern regularity was developed. Simulated and experimental patterns were compared using the newly developed method and comparison indicates the presence of interaction between microdischarges. Analysis of microdischarge patterns shows that regularity of the patterns increases with the number of excitation cycles used to produce the pattern.