Superhelices Self‐Assembled from Polypeptide‐Based Polymer Mixtures: Multistranded Features

Poly(γ‐benzyl‐l ‐glutamate)‐block‐poly(ethylene glycol) (PBLG‐b ‐PEG) rod–coil block copolymers and poly(γ‐benzyl‐l ‐glutamate) (PBLG) homopolymers can cooperatively self‐assemble into superhelical structures in aqueous solution. Herein, we discovered that the helices can have multiple strands with tunable characteristics. The strand number was dependent on the initial polymer concentration of the self‐assembly, the self‐assembly temperature, and the weight fraction of the block copolymers in the mixture. Higher initial polymer concentrations or lower weight fractions of the block copolymers induced the formation of helices with larger diameters and higher strand numbers, and helices prepared at higher temperatures had higher strand numbers. Based on an analysis of the correlation between the geometric parameters of the helices and the strand number, a possible mechanism for the formation of multistranded superhelices is suggested.     

The Origin of Hierarchical Structure Formation in Highly Grafted Symmetric Supramolecular Double‐Comb Diblock Copolymers

Involving supramolecular chemistry in self‐assembling block copolymer systems enables design of complex macromolecular architectures that, in turn, could lead to complex phase behavior. It is an elegant route, as complicated and sensitive synthesis techniques can be avoided. Highly grafted double‐comb diblock copolymers based on symmetric double hydrogen bond accepting poly(4‐vinylpyridine)‐block‐poly(N‐acryloylpiperidine) diblock copolymers and donating 3‐nonadecylphenol amphiphiles are realized and studied systematically by changing the molecular weight of the copolymer. Double perpendicular lamellae‐in‐lamellae are formed in all complexes, independent of the copolymer molecular weight. Temperature‐resolved measurements demonstrate that the supramolecular nature and ability to crystallize are responsible for the formation of such multiblock‐like structures. Because of these driving forces and severe plasticization of the complexes in the liquid crystalline state, this supramolecular approach can be useful for steering self‐assembly of both low‐ and high‐molecular‐weight block copolymer systems.     

Significant glass‐transition‐temperature increase through hydrogen‐bonded copolymers

The role of hydrogen bonding in promoting intermolecular cohesion and higher glass‐transition temperatures of polymer is a subject of longstanding interest. A series of poly(vinylphenol‐co‐vinylpyrrolidone) copolymers were prepared by the free‐radical copolymerization of acetoxystyrene and vinylpyrrolidone; this was followed by the selective removal of the acetyl protective group, with corresponding and significant glass‐transition‐temperature increases after this procedure. The incorporation of acetoxystyrene into poly(vinylpyrrolidone) resulted in lower glass‐transition temperatures because of the reduced dipole interactions in its homopolymers. However, the deacetylation of acetoxystyrene to transform the poly(vinylphenol‐co‐vinylpyrrolidone) copolymer enhanced the higher glass‐transition temperature because of the strong hydrogen bonding in the copolymer chain. The thermal properties and hydrogen bonding of these two copolymers were investigated with differential scanning calorimetry and Fourier transform infrared spectroscopy, and good correlations between the thermal behaviors and IR results were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2313–2323, 2002     

β‐Lactam functionalized poly(isoprene‐b‐ethylene oxide) amphiphilic block copolymers

Amphiphilic block copolymers containing β‐lactam groups on the polyisoprene block were synthesized from poly(isoprene‐b‐ethylene oxide) (IEO) diblock copolymer precursors, prepared by anionic polymerization. β‐Lactam functionalization was achieved via reaction of the polyisoprene (PI) block with chlorosulfonyl isocyanate and subsequent reduction. The resulting block copolymers were molecularly characterized by SEC, FTIR, and NMR spectroscopies and DSC. Functionalization was found to proceed in high yields, altering the solubility properties of the PI block and those of the functionalized diblocks. Hydrogen bond formation is assumed to be responsible for the decreased crystallinity of the poly(ethylene oxide) block (PEO) in the bulk state as indicated by DSC measurements. The self‐assembly behavior of the β‐lactam functionalized poly(isoprene‐b‐ethylene oxide) copolymers (LIEO) in aqueous solutions was studied by dynamic light scattering (DLS), static light scattering (SLS), fluorescence spectroscopy, and atomic force microscopy (AFM). Nearly spherical loose aggregates were formed by the LIEO block copolymers, having lower aggregation numbers and higher cmc values compared to the IEO precursors, as a result of the increased polarity of the β‐lactam rings incorporated in the PI blocks. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 24–33, 2010     

Synthesis of reactive poly(norbornene): Ring‐opening metathesis polymerization of norbornene monomer bearing cyclic dithiocarbonate moiety

A norbornene monomer bearing cyclic dithiocarbonate moiety (NB‐DTC) was successfully synthesized from the corresponding precursor having epoxy moiety by its reaction with carbon disulfide. NB‐DTC underwent the ring‐opening metathesis polymerization (ROMP) catalyzed by a ruthenium carbene complex to give the corresponding poly(norbornene). The dithiocarbonate moiety incorporated into the side chain of the obtained poly(norbornene) reacted with amine to afford the corresponding thiourethane moiety with thiol group, which underwent oxidative S‐S coupling and/or addition reaction to the C‐C double bond in the main chain, leading to formation of a cross‐linked polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Composite ultrafiltration membranes with tunable properties based on a self‐assembling block copolymer/homopolymer system

Composite ultrafiltration membranes were fabricated by coating a thin film of self‐assembling polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) block copolymers and poly(acrylic acid) homopolymers on top of a support membrane. Block copolymers self‐assembled into a nanostructure where the minority component forms cylinders, whereas homopolymers reside in the core of the cylinders. Selective removal of the homopolymers led to the formation of pores. The morphology of the polymer layer was controlled by varying the content of homopolymers or polymer concentration of the coating solution, which led to membranes with different molecular weight cutoffs (MWCOs) and permeabilities. Uniform pores were obtained using low homopolymer contents, whereas high homopolymer contents caused macrophase separation and resulted in large polydisperse pores or craters at the surface. The thickness of the block copolymer film also influenced the structure and performance of the membranes, where a thicker film results in a strong decrease in permeability but a lower MWCO. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1546–1558     

Vinyl‐Type Polynorbornenes with Pendant PCBM: A Novel Acceptor for Organic Solar Cells

Vinyl addition homo‐ and copolymerization of norbornene monomer ( M1 ) functionalized with a PCBM moiety using a Pd(II) catalyst in combination with a 1‐octene chain transfer agent efficiently produces polynorbornenes with side‐chain PCBM groups. Characterization by NMR spectroscopy and elemental analysis reveals that the copolymers constitute a well‐defined polymer structure with controlled incorporation of M1 . Although the homopolymer is insoluble in organic solvents, the copolymers containing 62 mol% ( P2 ) and 50 mol% ( P3 ) of the PCBM moiety are soluble in chlorinated solvents such as o‐dichlorobenzene. The bulk‐heterojunction organic photovoltaic devices fabricated based on the P3HT: P3 blends show that P3 can adequately function as an electron acceptor, leading to a cell with a power conversion efficiency of 1.5%, which is outstanding among the polymeric rivals.     

Templated PISA: Driving Polymerization‐Induced Self‐Assembly towards Fibre Morphology

Dispersions of block copolymer fibres in water have many potential applications and can be obtained by polymerization‐induced self‐assembly (PISA), but only under very restricted experimental conditions. In order to enlarge this experimental window, we introduced a supramolecular moiety, a hydrogen‐bonded bis‐urea sticker, in the macromolecular reversible addition fragmentation chain transfer (RAFT) agent to drive the morphology of the nano‐objects produced by RAFT‐mediated PISA towards the fibre morphology. This novel concept is tested in the synthesis of a series of poly(N,N‐dimethylacrylamide)‐b‐poly(2‐methoxyethyl acrylate) (PDMAc‐b‐PMEA) diblock copolymers prepared by dispersion polymerization in water. The results prove that the introduction of the templating bis‐urea stickers into PISA greatly promotes the formation of fibres in a large experimental window.     

Induction of periodic nanostructures in polythiophene films through block copolymer templating

A new class of periodically nanostructured polythiophene materials with high regularity and numerous morphologies is prepared through the cooperative self‐assembly of polythiophene derivatives with a templating block copolymer (BCP) and poly(1,4‐isoprene)‐block‐poly(methacrylic acid) (PMA). The selection of the hydrophilic and aprotic triethylene glycol (TEG) group as side chains on polythiophene and the use of hydrophilic and protic PMA are crucial to producing well‐ordered nanostructures in polythiophene films, as it enables selective coassembly within the hydrophilic domain through hydrogen bonding. The composite films are shown to have formed hexagonally packed cylinders with 28 nm periodicities based on small‐angle X‐ray scattering and transmission electron microscopy. The formation of hydrogen bonding is revealed by a shift in the carbonyl peak of PMA in the Fourier transform infrared spectra of the composite film relative to the neat film. This suggests that the TEG‐functionalized polythiophene selectively incorporates into PMA. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1105–1112     

Preparation of reactive block copolymers and their transformation to hollowed nanostructures

A novel polymeric hollow nanostructure was generated using micellar template method through a three‐step procedure. First, the block copolymers were synthesized via ring‐opening metathesis polymerization by sequentially adding monomers 7‐oxanorborn‐5‐ene‐exo‐exo‐2,3‐dicarboxylic acid dimethyl ester and the mixture of norbornene and 2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene in chloroform, and also atom transfer radical polymerization of 4‐(3‐butenyl)styrene was carried out by using the as‐obtained block copolymer poly(7‐oxanorborn‐5‐ene‐exo,exo‐2,3‐dicarboxylic acid dimethylester)‐block‐poly(norbornene‐co‐2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene as macroinitiator to afford a graft copolymer bearing poly(4‐(3‐butenyl)styrene) branch poly(7‐oxanorborn‐5‐ene‐exo,exo‐2,3‐dicarboxylic acid dimethylester)‐block‐poly(norbornene‐co‐2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene)‐graft‐poly(4‐(3‐butenyl)styrene). Second, the shell‐crosslinked micelles were prepared by ruthenium‐mediated ring‐closing metathesis of poly(4‐(3‐butenyl)styrene) branches in intramicelle formed from the copolymers self‐assembly spontaneously in toluene. Finally, the hollowed spherical nanoparticles were presented by removing the micellar copolymer backbone through the cleavage of the ester bonds away from the crosslinked network of branches. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Ultra‐Fast Synthesis of Multivalent Radical Nanoparticles by Ring‐Opening Metathesis Polymerization‐Induced Self‐Assembly

We report the straightforward, time‐efficient synthesis of radical core–shell nanoparticles (NPs) by polymerization‐induced self‐assembly. A nitroxide‐containing hydrophilic macromolecular precursor was prepared by ring‐opening metathesis copolymerization of norbornenyl derivatives of TEMPO and oligoethylene glycol and was chain‐extended in situ with norbornene in ethanolic solution, leading to simultaneous amphiphilic block copolymer formation and self‐assembly. Without any intermediate purification from the monomers to the block copolymers, radical NPs with tunable diameters ranging from 10 to 110 nm are obtained within minutes at room temperature. The high activity of the radical NPs as chemoselective and homogeneous, yet readily recyclable catalysts is demonstrated through oxidation of a variety of alcohols and recovery by simple centrifugation. Furthermore, the NPs show biocompatibility and antioxidant activity in vitro.     

Chromatographic characterization of amphiphilic di‐ and tri‐block copolymers of poly(ethylene oxide) and poly(ε‐caprolactone)

Amphiphilic di‐ and tri‐block copolymers based on poly(ethylene oxide) as a hydrophilic segment and poly(ε‐caprolactone) as a hydrophobic part are synthesized by the ring‐opening polymerization of ε‐caprolactone while using poly(ethylene glycol)s and methoxy poly(ethylene glycol)s of varying molar masses as macro‐initiators. The synthesized block copolymers are characterized with respect to their total relative molar mass and its distribution by size exclusion chromatography. Liquid chromatography at critical conditions of both blocks is established for the analysis of individual block lengths and tracking presence of unwanted homopolymers of both types in the block copolymer samples. New critical conditions of polycaprolactone on reversed phase column are reported using organic mobile phase. The established critical conditions of polycaprolactone extended the applicable molar mass range significantly compared to already reported critical conditions of polycaprolactone in aqueous mobile phase. Block copolymers are also analyzed at critical conditions of poly(ethylene glycol). Complete analysis of the di‐ and tri‐block copolymers at corresponding critical conditions provided a fair estimate of molar mass of non‐critical block besides information regarding presence of homopolymers of both types in the samples.     

Synthesis of chiral micelles and nanoparticles from amino acid based monomers using RAFT polymerization

Homopolymers of ^tbutyl acrylate (P^tBuA) and a monosubstituted acrylamide (PAM) having an amino acid moiety in the side chain, N‐acryloyl‐(L )‐phenylalanine methyl ester 1 , have been synthesized by Reversible Addition‐Fragmentation Chain Transfer (RAFT) polymerization. Diblock copolymers of these homopolymers were also synthesized by chain extending P^tBuA with monomer 1 and after modification, using simple acid deprotection chemistries of the acrylate block to afford a poly (acrylic acid) block, an optically active amphiphilic diblock copolymer was isolated. The optically active amphiphilic diblock copolymers, which contain chiral amino acid moieties within the hydrophobic segment, were then self‐assembled to afford spherical micelles which were subsequently crosslinked throughout the shell layer to afford robust chiral nanoparticles. The hydrodynamic diameters (D_h) of the block copolymer micelles and nanoparticles were measured by dynamic light scattering (DLS) and the dimensions of the nanoparticles were determined using tapping‐mode atomic force microscopy (AFM) and transmission electron microscopy (TEM). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3690–3702, 2008     

Influence of alkyl chain length and molecular weight on the surface functionalization via adsorption/entrapment with biocidal cationic block copolymers

Polysulfone (PSf) films were functionalized with block copolymers containing poly(n-butyl acrylate) (PBA) as anchor block which is able to firmly tether the biocidal quaternized poly(2-dimethylaminoethyl methacrylate) (PDMAEMAq) to the surface. Block copolymers were synthesized using sequential atom transfer radical polymerization (ATRP) and quaternization with methyl and/or octyl groups rendered the polymers biocidal. Upon reversible swelling of the PSf surface layer in the adsorption/entrapment process, incorporation of the block copolymer is anticipated to be stable; homopolymers, i.e., methyl- or octyl-quaternized PDMAEMAq, were investigated for comparison. The addition of salt to the functionalization solution containing the block copolymer induced a decrease in the critical micelle concentration and lead to higher functionalization efficiency. The impact of intra- or interchain interactions in these aggregates on adsorption and firm entrapment in PSf was determined by measuring contact angle, charge density and zeta potential.     

Consequences of Block Sequence on the Orthogonal Folding of Triblock Copolymers

ABA‐ and BAB‐type triblock copolymers possessing pendant, self‐assembling motifs in the A and B blocks were synthesized, with 2‐ureidopyrimidinone (UPy) and benzene‐1,3,5‐tricarboxamide (BTA) for the A and B block, respectively. They were investigated to assess if and how the polymer’s microstructure influences the self‐assembly behavior of the supramolecular motifs and, as a result, the single‐chain folding process. BAB‐type triblock copolymers were synthesized via atom transfer radical polymerization (ATRP) with molecular weights ranging from 30 to 120 kg mol^?1; the BTA and UPy motifs were attached using a post‐functionalization approach. The ABA‐type triblock copolymers were available from previous work. In highly dilute solutions, both types of triblock copolymers fold into single‐chain polymeric nanoparticles (SCPNs) via thermally induced BTA self‐assembly and photo‐triggered UPy dimerization. Chain collapse induced by intramolecular UPy dimerization was evaluated using size‐exclusion chromatography (SEC). The BTA self‐assembly was monitored by circular dichroism (CD) spectroscopy. The microstructures of SCPNs were visualized by atomic force microscopy (AFM). SEC analysis indicated a more loose packing for the BAB‐type folded nanoparticles than for the ABA‐type ones, which implies that topological differences in the polymer architecture do affect the folding behavior, although only slightly. The facile synthetic protocol developed here provides topologically different triblock architectures and opens up the area for single‐chain folding technology that is applicable in artificial enzymatic systems with compartmentalized domains.     

Syntheses of polyolefin‐based stereoregular diblock copolymers for self‐assembled nanostructures

The preparation of polyolefin‐based stereoregular diblock copolymers by postpolymerization of ethenyl‐capped syndiotactic polypropylene‐based propylene/norbornene copolymer (sPP‐based P‐N copolymer) led to the successful generation of a structurally uniform stereoregular diblock copolymer for self‐assembly studies. The ethenyl‐capped prepolymer was prepared by conducting propylene/norbornene copolymerization in the presence of Me₂C(Cp)(Flu)ZrCl₂/MAO. Ozonolysis of ethenyl‐capped sPP‐based P‐N copolymer provided the formyl group end‐capped, end‐functionalized prepolymer with a quantitative functional group conversion ratio. Subsequently, connecting the formyl end‐group of the stereoregular prepolymer by coupling with living anionic polystyrene resulted in the high yield production of stereoregular diblock copolymer (sPP‐based P‐N‐block‐polystyrene), which is difficult to prepare by other methods. The resulting stereoregular diblock copolymer possesses precise chemical architecture to self‐organize into consistent nanostructures as evidenced by transmission electron microscopy and small angle X‐ray scattering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4843–4856, 2008     

Synthesis and Hierarchical Self‐Assembly of Diphenylalanine‐Based Homopolymer and Copolymers By RAFT Polymerization

Dipeptide diphenylalanine has attracted significant research interests because of its ability to self‐assemble into various nanostructures such as nanotubes, nanowires, and nanoribbons. In this article, we present the synthesis and self‐assembly of a novel diphenylalanine‐based homopolymer and block/random copolymers by the reversible addition–fragmentation chain transfer (RAFT) polymerization of an acrylamide having a dipeptide moiety. The RAFT polymerization of N‐acryloyl‐l ,l ‐diphenylalanine (A‐Phe‐Phe‐OH) afforded novel amino acid‐based polymers with predetermined molecular weights and relatively narrow‐molecular weight distributions. The hierarchical self‐assembled structures of poly(A‐Phe‐Phe‐OH), which involve nanorods, larger nanofiber‐like microcrystals, and fiber bundles, were characterized by atomic force microscopy (AFM), transmission electron microscopy, scanning electron microscopy, and dynamic light scattering measurements. The circular dichroic measurements of poly(A‐Phe‐Phe‐OH) revealed its characteristic chiroptical property, which is affected by the nature of the solvents and the addition of urea and salts via hydrophobic, hydrogen bonding, and electrostatic interactions. Thermo‐ and pH‐responsive block and random copolymers composed of A‐Phe‐Phe‐OH and N‐isopropylacrylamide were synthesized by RAFT polymerization, and the thermoresponsive properties and assembled structures of the resulting copolymers were investigated by AFM and turbidity measurements. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2562–2574     

Synthesis and photoresponsive behavior of azobenzene‐containing side‐chain liquid crystalline diblock polymers with polypeptide block

Well‐defined azobenzene‐containing side‐chain liquid crystalline diblock copolymers composed of poly[6‐(4‐methoxy‐azobenzene‐4′‐oxy) hexyl methacrylate] (PMMAZO) and poly(γ‐benzyl‐L ‐glutamate) (PBLG) were synthesized by click reaction from alkyne‐ and azide‐functionalized homopolymers. The alkyne‐terminated PMMAZO homopolymers were synthesized by copper‐mediated atom transfer radical polymerization with a bromine‐containing alkyne bifunctional initiator, and the azido‐terminated PBLG homopolymers were synthesized by ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride in DMF at room temperature using an amine‐containing azide initiator. The thermotropic phase behavior of PMMAZO‐b‐PBLG diblock copolymers in bulk were investigated using differential scanning calorimetry and polarized light microscopy. The PMMAZO‐b‐PBLG diblock copolymers exhibited a smectic phase and a nematic phase when the weight fraction of PMMAZO block was more than 50%. Photoisomerization behavior of PMMAZO‐b‐PBLG diblock copolymers and the corresponding PMMAZO homopolymers in solid film and in solution were investigated using UV–vis. In solution, trans–cis isomerization of diblock copolymers was slower than that of the corresponding PMMAZO homopolymers. These results may provide guidelines for the design of effective photoresponsive anisotropic materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of quaternary ammonium ion‐grafted polyolefins via activation of inert C?H bonds and nitroxide mediated radical polymerization

A TEMPO‐functionalized isotactic poly(1‐butene) macroinitiator was synthesized via rhodium‐catalyzed activation of the alkane C? H bonds in polyolefin side chain using a boron reagent and subsequent transformations of the boronate ester group in the polymer. These functionalization processes did not induce cross‐linking or degradation of the polymer chains. Nitroxide mediated radical polymerization of dipropyl(4‐vinylphenyl)amine with the macroinitiator produced high‐molecular weight amine‐grafted copolymers of the polyolefin. Adjusting the ratio of polar monomer concentration to macroinitiator concentration controlled the concentrations of amine blocks in the graft copolymers up to 10 mol %. Quaternization of the amine‐grafted copolymers with methyl triflate generated ammonium ion blocks along the side chain of the graft copolymers. A systematic decrease of contact angle in a series of ammonium ion‐grafted copolymers was observed through water contact angle measurements, suggesting that the graft polymerization and the quaternization led to increased hydrophilicity in the polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4519–4531, 2009     

Characterization of poly(2-oxazoline) homo- and copolymers by liquid chromatography at critical conditions

In this study liquid chromatography at critical conditions for poly(2-ethyl-2-oxazoline)s (PEtOx) has been performed for the first time in order to analyze functional PEtOx homopolymers and block copolymers. Besides the verification of the critical point of adsorption with two series of ester end group functionalized PEtOx homopolymers, to evaluate the effect of both the chain length dependence and the end group polarity, using a cyano column with a solvent combination of 2-propanol and water, also two-dimensional liquid chromatography (2D-LC) has been applied for a poly(2-oxazoline) block copolymer. The combined characterization techniques provided further information about the polymerization procedure with regard to the formation of side-products by separation of the block copolymer from the corresponding homopolymer impurities. In addition, hyphenation of LCCC with MALDI-TOF MS and ESI-Q-TOF tandem mass spectrometry verified the obtained results.