Alkanolamide as an accelerator,filler-dispersant and a plasticizer in silica-filled natural rubber compounds

A feasibility study was carried out on the utilization of Alkanolamide (ALK) on silica reinforcement of natural rubber (NR) by using a semi-efficient cure system. The ALK was incorporated into the NR compound at 1.0, 3.0, 5.0, 7.0 and 9.0 phr. An investigation was carried out to examine the effect of ALK on the cure characteristics and properties of NR compounds. It was found that ALK gave shorter scorch and cure times for silica-filled NR compounds. ALK also exhibited higher torque differences, tensile modulus, tensile strength, hardness and crosslink density of up to 5.0 phr of ALK loading, and then decreased with further increases of ALK loading. The resilience increased with increased ALK loading. Scanning electron microscopy (SEM) micrographs proved that 5.0 phr of ALK in the silica-filled NR compound exhibited the greatest matrix tearing line and surface roughness due to higher reinforcement level of the silica, as well as better dispersion and cure enhancement.     

The effect of alkanolamide loading on properties of carbon black-filled natural rubber (SMR-L), epoxidised natural rubber (ENR), and styrene-butadiene rubber (SBR) compounds

The effect of Alkanolamide (ALK) loading on properties on three different types of carbon black (CB)-filled rubbers (SMR-L, ENR-25, and SBR) was investigated. The ALK loadings were 1.0, 3.0, 5.0 and 7.0 phr. It was found that ALK gave cure enhancement, better filler dispersion and greater rubber–filler interaction. ALK also enhanced modulus, hardness, resilience and tensile strength, especially up to 5.0 phr of loading in SMR-L and SBR compounds, and at 1.0 phr in ENR-25 compound. Scanning electron microscopy (SEM) proved that each optimum ALK loading exhibited the greatest matrix tearing line and surface roughness due to better rubber - filler interaction.     

Effect of high temperature on reduction-controlling reaction rate of agricultural waste chars and coke with steelmaking slag

In the present research, mechanical and thermal properties of high-density polyethylene/wood flour were improved by incorporating nanoclay (Cloisite 30B) and antioxidant (Irganox B225) in the compound. Design of experiments was carried out to optimize composition among nine compounds and to investigate the effect of nanoclay and antioxidant (0–5 phr) and (0–0.4 phr), respectively. The results of mechanical tests showed approximately 24% increase in the tensile strength of compounds containing 2.5 and 5.0 part per hundred (phr) of the nanoclay in the composite compared with the same samples without nanoclay. The tensile modulus of composites increased 7.3% by increasing the level of nanoclay from 0 to 2.5 phr. However, a further increase in the nanoclay content led to a 4.3% decrease in tensile modulus. Evaluation of the thermal oxidation stability of samples confirmed that the thermal oxidation of composites decreased with increasing nanoclay from 0 to 5.0 phr and increased significantly with the addition of the antioxidant.

     

The physical and mechanical properties and cure characteristics of NBR/silica/MWCNT hybrid composites

The main objective of the present study was to investigate the synergistic effect of simultaneous use of two reinforcing fillers in rubber compounds based on acrylonitrile-butadiene copolymer (NBR). Silica was used as reinforcing filler in all samples and the loading content was 25 phr. 3 and 5 phr of multiwall carbon nanotubes (MWCNT) were used as second reinforcing filler in NBR/silica compounds. Melt mixing method was employed for compound preparation. The effects of carbon nanotube/silica hybrid filler on mechanical and vulcanization characteristics of the rubber compounds were investigated. These results revealed that addition of the reinforcing filler, either carbon nanotube or silica, shortened the optimum cure time (t₉₀) and also scorch time (t_s1) of samples compared to that of pure NBR compound. In hybrid compounds, the reduction in optimum cure time and scorch time was higher than that of for silica-filled NBR or CNT-filled NBR compounds. This can be attributed to the synergistic effect between CNT and silica as two reinforcing agents in NBR compounds. Regardless the composition of the reinforcing filler, an increase of the relaxed storage modulus is observed, while the tan δ value is decreased steadily. The dynamic modulus reinforcement of nanocomposites was examined by the Guth Gold and Modified Guth Gold equations. For hybrid samples, the experimental values show a significant positive deviation from model predictions. According to the Barlow’s formula, hybrid compounds show higher burst strength compared to silica or CNT filled NBR compounds.     

Comparative study on the effect of partial replacement of silica or calcium carbonate by bentonite on the properties of EPDM composites

The effects of the partial replacement of silica or calcium carbonate (CaCO₃) by bentonite (Bt) on the curing behaviour, tensile and dynamic mechanical properties and morphological characteristics of ethylene propylene diene monomer (EPDM) composites were studied. EPDM/silica/Bt and EPDM/CaCO₃/Bt composites containing five different EPDM/filler/Bt loadings (i.e., 100/30/0, 100/25/5, 100/15/15, 100/5/25 and 100/0/30 parts per hundred rubber (phr)) were prepared using a laboratory scale two-roll mill. Results show that the optimum cure (t₉₀) and scorch (t_S2) time decreased, while the cure rate index (CRI) increased for both composites with increasing Bt loading. The tensile properties of EPDM/CaCO₃/Bt composites increased with the replacement of CaCO₃ by Bt from 0 to 30 phr of Bt. For EPDM/silica/Bt composites, the maximum tensile strength and E_b were obtained at a Bt loading of 15 phr, with enhanced tensile modulus on further increase of Bt loading. The dynamic mechanical studies revealed a strong rubber-filler interaction with increasing Bt loading in both composites, which is manifested by the lowering of tan δ at the glass transition temperature (Tg) for EPDM/CaCO₃/Bt composites and tan δ at 40 °C for EPDM/silica/Bt composites. Scanning electron microscopy (SEM) micrographs proved that incorporation of 15 phr Bt improves the dispersion of silica and enhances the interaction between silica and the EPDM matrix.     

Comparison of the mechanical properties at similar hardness level of natural rubber filled with various reinforcing-fillers

Commercially, the alteration of a rubber formulation is usually made in such a way as to keep the hardness of the rubber product constant. This is because a specific hardness of the rubber product sets the limit to its practical applications. Therefore, in this paper, natural rubber (NR) vulcanizates containing various fillers were prepared to have the same hardness level, and their mechanical properties were compared and related to the degree of filler dispersion. The results show that higher amounts of carbon black (CB) and silica are needed for CB- and silica-filled natural rubber vulcanizates to achieve the same hardness value as a NR vulcanizate containing 6 phr of montmorillonite clay. At equal loading of fillers, clay-filled vulcanizate exhibits higher modulus, hardness, tensile strength and compression set, but lower heat build-up resistance and crack growth resistance than those of the vulcanizates containing conventional fillers. For the vulcanizate having the same hardness value, CB-filled vulcanizate gives the better overall mechanical properties followed by the clay-filled and silica-filled vulcanizates, respectively. The explanation is given as the better dispersion of carbon black, as can be seen in the SEM micrograph.     

Graphene and MnO2 decorated graphene filled composites for electromagnetic shielding applications having excellent dielectric properties

Graphene nanoplatelets (GnP) and α-MnO₂ decorated GnP were integrated into an ethylene vinyl acetate (EVA) matrix using the dual mixing method (solution followed by melt mixing). GnP was added in 1, 3, 5, 8, 10 and 15 phr loadings into an EVA matrix to obtain composites and evaluate their various properties suitable for mechanical and electrical applications. The graphene nanoplatelets were further decorated with α-MnO₂ which was subsequently integrated into EVA at an 8 phr loading to form composites. It was observed in the GnP-EVA composites, that with an increasing GnP content, a substantial increase in the tensile strength (188%) over the neat polymer was observed at a 10 phr loading but reduced thereafter at a 15 phr loading. Dielectric permittivity of the composites were observed to increase with an increasing filler loading, the addition of α-MnO₂ also having a beneficial effect. Conductivity as well as the electromagnetic interference shielding performance were improved with increasing GnP concentrations. A maximum 28 dB of shielding was observed in the 15 phr loaded GnP-EVA composite whereas the α-MnO₂ decorated GnP-EVA composite showed a shielding efficiency of 22 dB at a concentration of 8 phr for a thickness of 2 mm with excellent thermal and mechanical properties. Overall, the composite material will find its application as a flexible EMI shielding material.     

Nano engineered biodegradable capsules for the encapsulation and kinetic release studies of ciprofloxacin hydrochloride

Polyelectrolyte based nano and micro capsules have been extensively studied as promising drug carrier in recent years. Natural degradable capsules have received great deal of attention due to their fascinating structural and morphological characteristics, biocompatibility, sustained and targeted-release capabilities. In this work, chitosan - dextran sulphate nano capsules were prepared via Layer-by-Layer (L-b-L) technique using sacrificial template for drug delivery applications. The loading and in vitro release studies were performed using ciprofloxacin hydrochloride as a model drug. The release media used in the study are plain water and Phosphate Buffered Saline (PBS). The optimum drug load was 389 ​μg, at a loading pH of 2.1 and a temperature of 25 ​°C for 50 ​min encapsulation time. The drug loaded capsules exhibited a slow and sustained release up to 24 ​h and the maximum release rate was obtained at pH 1.2 in water and pH 7.4 in PBS. Least amount of drug release occurred at pH 5.0 in both the release media. The amounts of drug release in water at pH 1.2, pH 5.0 and pH 7.4 are 309 ​μg, 163 ​μg and 251 ​μg respectively where as the corresponding values in the case of PBS (at pH 1.2, pH 5.0 and pH 7.4) are 236 ​μg, 198 ​μg and 251 ​μg respectively. Two different models namely, Ritger - Peppas and Higuchi models were chosen to study the release kinetics behaviour of ciprofloxacin hydrochloride. The prepared bio-degradable capsules had potential as drug carrier for targeting antibacterial drugs with diverse functionality.     

Effect of nanocrystalline cellulose on the curing characteristics and aging resistance properties of carbon black reinforced natural rubber

This work focused on the effect of nanocrystalline cellulose (NCC) on the curing characteristics, aging resistance and thermal stability of natural rubber (NR) reinforced with carbon black (CB). Sharing the same fillers loading of 45 parts per hundred rubber (phr), NR/NCC/CB composites with different NCC/CB ratios (i.e. 0/45, 5/40, 10/35, 15/30, 20/25 phr) were prepared and analyzed. Resorcinol and hexamethylene tetramine (RH), acting as the modifier in NR/NCC interface, was also discussed for its influence. The result showed that an relatively higher ratio of NCC/CB led to a lower torque, a shorter cure time (T ₉₀), a slightly longer scorch time (T ₁₀) and a bigger vulcanization rate constant (K). This tendency suggested that the existence of NCC accelerated the vulcanization process. Additionally, modified by RH, NR/NCC/CB compounds exhibited a short T ₁₀ and a elevated torque. And a moderate RH content would lower the E _a of vulcanization. A 10 phr substitute of CB by NCC can help to improve aging resistance in terms of mechanical properties. In a high temperature aging condition, composites with 10 phr NCC also performed the highest storage modulus (G′) among composites tested. A moderate NCC content contributed to the best retention of G′ after high temperature aging, so did the incorporation of RH. With the partial replacement of CB by NCC, the temperature of 5% weight-lose had a slight drop and the apparent crosslink density showed a decrease. Thanks to the interaction of RH with both NR and NCC, composites showed an improvement in apparent crosslink density after modified by RH.     

Determining β-lactam antibiotics in aquaculture products by modified QuECHERS combined with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS)

In this study, a multi-residue determination method of QuECHERS combined with UHPLC-MS/MS was developed to determine nine β-lactam antibiotics (penicillin G, amoxicillin, ampicillin, cephalexin, cefquinome, ceftiofur, cefazolin, cephapirin, cefuroxime) in aquaculture products. All the nine β-lactam antibiotics exhibited excellent linearity within the range of 2.0–200 ng/mL (cefuroxime: 5.0–200 ng/mL, r greater than 0.999), while the limits of detection (LODs) and quantification (LOQs) were 2.0–5.0 μg/kg and 5.0–10.0 μg/kg, respectively. The recoveries of this method in five aquaculture products (Penaeus Orientalis, Cyprinus Carpio, Channa Argus, Aristichthys Nobilis, and Ctenopharyngodon Idella) ranged from 85.4% to 113.3% and the intra-day and inter-day precisions (%RSDs) were less than 15%. The results suggested the feasibility of this method as a rapid, simple, and accurate approach for determining the residues of the β-lactam antibiotics in aquaculture products.     

Synthesis and antimicrobial,antiproliferative and anti-inflammatory activities of novel 1,3,5-substituted pyrazoline sulphonamides

The design of novel molecules is imperative for the discovery of potent drugs in the medicinal chemistry field. In this work, new 1,3,5-substituted pyrazoline sulphonamides were synthesised using a two-step process with microwave assistance and evaluated biologically for their antimicrobial, antiproliferative, and anti-inflammatory properties. Most of the sulphonamides bearing 3-OH or 4-Cl groups exhibited significant inhibition of two Gram-positive bacteria, Bacillus subtillis and Staphylococcus aureus, and the yeast Candida albicans. Six compounds showed good activity against the cancer cell lines cervix carcinoma (Hep-2C) and human lung carcinoma (A549) with IC₅₀ in the range 16.03 ± 1.63 to 22.75 ± 0.19 μM and 18.64 ± 1.02 to 20.66 ± 2.09 μM, respectively, and exhibited low toxicity against mammalian Vero cells. In evaluating in vitro anti-inflammatory behaviour, five compounds showed high inhibition of NO production over the standard reference, with low toxicity against murine macrophage cell line RAW 264.7. Further investigation found that two compounds, 1b and 18b, exhibited the highest activity when testing mouse ear oedema. The findings are promising for the discovery of potent new drugs.     

Mesoporous hollow silicon spheres modified with manganese ion sieve: Preparation and its application for adsorption of lithium and rubidium ions

In this work, mesoporous hollow silicon spheres modified with 3‐aminopropyl‐ triethoxysilane (APTES) of loaded hydrogen manganese oxide lithium ion sieve (APTES/HMO‐ HS) was prepared. The structure and morphology of as‐prepared APTES/HMO‐HS were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray photoelectron spectroscopy, transmission electron microscopy and nitrogen adsorption‐desorption measurements. The Brunner‐Emmet‐Teller (BET) surface areas, pore diameters and pore volumes of APTES/HMO‐HS decreased gradually, while the Li:Mn:Si molar ratios range from 1:1:50 to 1:1:10. The obtained hierarchical porous APTES/50HMO‐HS has a high specific surface area (557.1694 m² g^‐1). The lithium and rubidium ions solutions were used to measure the adsorption performance of the APTES/HMO‐HS adsorbent. The pseudo‐first‐order and pseudo‐second‐order kinetics, Langmuir and Freundlich isotherms of APTES/HMO‐HS were investigated; suggesting that the adsorption kinetics can be described by the pseudo‐second‐order kinetic model and the adsorption isotherms well fits the Langmuir isotherm equation. The obtained results show that the prepared APTES/HMO‐HS exhibits excellent abilities to simultaneously and selectively recover Li⁺ and Rb⁺ (11.22 mg·g^‐1 and 8.31 mg·g^‐1) and have a promising application in the simultaneous adsorption of lithium and rubidium ions.     

Microbial desulfurization of ground tire rubber by Thiobacillus ferrooxidans

This study focused on the microbial desulfurization of ground tire rubber (GTR) by Thiobacillus ferrooxidans, which selected from the soil of an iron mine had strong sulphur oxidizing capacity. GTR was desulfurizated in the modified Silverman medium during the cultivation of T. ferrooxidans for 30 days, and T. ferrooxidans was able to maintain a high biomass. The continuous increase of SO₄²⁻ in the medium indicated that the sulfur on the surface of GTR was oxidized. FTIR-ATR and XPS spectra revealed that a rupture of conjugated CC bonds and a reduction of sulfur content on the surface of GTR had occurred during desulfurization. The sol fraction of GTR increased from its original 4.69%-7.43%. Compared with GTR sheet, desulfurizated GTR (DGTR) sheets had much smoother surfaces, better physical properties, and higher swelling values. NR vulcanizates filled with DGTR (with 10-40 phr loading) had lower crosslink density and better mechanical properties than those filled with GTR at the same loading. The results determined by DMA suggested that NR vulcanizates filled with DGTR had a reduction of molecular chain friction resistance during glass transition and SEM photograph indicated a better interface coherence between DGTR and NR matrix.     

Compression stress relaxation in carbon black reinforced HNBR at low temperatures

Findings of a study of stress relaxation behaviour of hydrogenated nitrile butadiene rubber (HNBR) at nominal compressive strains up to 0.4 and temperatures above and below the glass transition temperature T_g are reported. Two formulations of a model HNBR with 36% acrylonitrile content and carbon black (CB) loading of 0 and 50 phr were investigated. The relaxation function of HNBR is found to be independent of strain at temperatures right above the T_g or at times longer than 10⁻³ s for the deformations employed. CB imparts higher long-term stiffness and also larger relaxation strength at times longer than 10⁻⁴ s to the HNBR, but it does not affect the relaxation behaviour of the rubber in the time span from 10⁻³ – 10⁴ s. In addition, the relationship between the strain energy function of HNBR and temperature is demonstrated to have a complex concave-downward shape which is affected by two competing contributions of entropy elasticity and the stress relaxation.     

Sum frequency generation study of immobilized 3-aminopropyltriethoxysilane self-assembled layer on Si(111) substrates

Distribution and orientation of 3-aminopropyltriethoxysilane (APTES) on a sensing surface play critical role on biosensor, but have not been fully investigated. In this work, the quality of APTES SAM immobilized on the Si(111) substrate was studied by observing sum frequency generation (SFG) response. The polarization, azimuthal angle, and position-dependent SFG spectra of APTES coverage were obtained. In ppp and psp-SFG spectra, the CH₂ and CH₃ vibrational and NH stretching modes were clearly seen around 3000 cm⁻¹ and around 3300 cm⁻¹ regions, respectively. The spp and ssp-SFG spectra presented too weak signals that the vibrational regions were not clear. The positional and azimuthal angle dependence of the SFG spectra was observed from 0^o to 360^o with the step of 45^o rotation around the surface normal. The 0° is defined as the [ ] direction of Si(111) crystal lying in the incident plane and opposite to the incident k vectors. The appearance of the NH mode was observed to be strongly dependent on the position. The results indicate that the distribution and orientation of APTES molecules were not well ordered on the Si surfaces, suggesting that SFG is an efficient method to check the quality of APTES coverage immobilized on substrates.     

In Situ Coating of Natural Rubber Film with Poly(vinyl chloride) Resin

Film formation of poly(vinyl chloride) resin (rPVC) coating on natural rubber (NR) surface in solid state was prepared and investigated. The mixtures of rPVC with NR were compressed at 170 °C for 15 min and found that the rPVC was migrated and coated on the NR surface which was proved by the images from Scanning Electron Microscope (SEM) and Atomic Force Microscope (AFM). The coated NR films with rPVC loading 5 and 10 phr are stronger and higher dielectric constant than uncoated NR film. Very high loading of rPVC for 50 and 100 phr result in decreasing of tensile strength and dielectric constant.     

Effect of radiation dose on the properties of natural rubber nanocomposite

Effect of radiation dose and carbon nanotubes (CNT) on the mechanical properties of standard Malaysian rubber (SMR) was investigated in this study. SMR nanocomposites containing 1–7 phr CNT were prepared using the solvent casting method and the nanocomposites were radiated at doses of 50–200 kGy. The change in mechanical properties, especially, tensile strength (Ts), elongation at break (Eb), hardness and tensile modulus at 100% elongation (M₁₀₀) were studied as a function of radiation dose. The structure and morphology of reinforced natural rubber was investigated by FESEM, TEM and AFM in order to gain further evidence on the radiation-induced crosslinking. It was found that the Ts, M₁₀₀ and the hardness of the SMR/CNT nanocomposites significantly increased with radiation dose; the elongation at break exhibited an increase up to 100 kGy, and a downward trend thereafter. Results on gel fraction further confirmed the crosslinking of SMR/CNT nanocomposites upon radiation.     

Thymus musilii Velen. as a promising source of potent bioactive compounds with its pharmacological properties: In vitro and in silico analysis

For the first time, we reported the phytochemical composition of the volatile oil from Thymus musilii Velen (T. musilii). The antioxidant and antimicrobial activities against various food-borne and clinical pathogenic microorganisms were also tested. The thyme oil was particularly rich in thymol (67.697 ± 0.938%), and thymyl acetate (12.993 ± 0.221%). The strongest antioxidant activity of the essential oil was registered with the tests: ABTS (IC₅₀ = 5.6 × 10⁻⁴ mg/mL) and β-carotene/linoleic acid (IC₅₀ = 3.2 × 10⁻³ mg/mL). This thymol-chemotype oil was active against all microorganisms tested with an inhibition growth zone ranging from 21.33 ± 1.52 mm for Proteus mirabilis (P. mirabilis) to 37.33 ± 1.15 mm for Candida vaginalis (C. vaginalis) strain. Overall, the tested oil exhibited bactericidal and fungicidal activities and only a small quantity of the tested essential oil was found to be sufficient for inhibiting the growth of the tested microorganisms. Furthermore, molecular docking results implies that, among the bioactive compounds, β-caryophyllene interacted strongly with the active site residues of TyrRS, GLMS and Gyrase enzymes and consequently support our in vitro results with the highest inhibition potential of this essential oil against tested pathogens, especially Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Our results suggested that essential oil of T. musiliii exhibited strong biological activities with a promising source of various natural compounds.     

Sol–gel preparation of aminopropyl-silica-magnesia hybrid materials

A series of aminopropyl-silica-magnesia hybrid materials has been prepared by the sol–gel method from tetraethoxysilane (TEOS), magnesium chloride (MgCl₂) and aminopropyltriethoxysilane (APTES) under acid conditions. The APTES:TEOS ratio was varied between 0:1 and 1:0. The aminopropyl coverage concentrations for APTES-silica-Mg samples were in the range of 0.3–2.3 mmol g⁻¹. The hybrid materials were characterized by numerous techniques, including X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), Fourier transform Raman spectroscopy (FT-Raman), solid-state ¹³C and ²⁹Si nuclear magnetic resonance (¹³C- and ²⁹Si-NMR), thermogravimetry (TGA), N₂ adsorption–desorption, small-angle X-ray scattering (SAXS), and scanning electron microscopy (SEM). The increase of APTES content in the silica network resulted in the increase of six-membered siloxane rings. The hybrid systems were shown to be formed from fully-condensed, trifunctional APTES species. The porosity and morphology of the hybrid materials were influenced by the initial TEOS/APTES ratio. The radius of gyration of the primary particles, determined by SAXS, was between 1.1 and 2.9 nm.