A new terpene ketone,a component of the essential oil ofElsholtzia ciliata

A new terpene ketone which has been called dehydroelsholtsia ketone has been isolated from the essential oil ofElsholtzia ciliata (Thumb.) Hyl. The structure of dehydroelsholtzia ketone as 3-methyl-2-(3-methylbut-2-enoyl)furan has been proposed on the basis of a study of its IR, PMR, mass and¹³C spectra and has been confirmed by its conversion into elsholtzia ketone.     

Thermomorphic metal scavengers: A synthetic and multinuclear NMR study of highly fluorinated ketones and their application in heavy metal removal

The preparation of a ketone with two long chain perfluoroalkyl groups is reported via the coupling reaction of a perfluorinated alkylzinc reagent and a perfluoro-acid chloride. This ketone has been investigated in the heterogeneous removal of heavy metals M²⁺ (M = Sn, Cd, Pb, Hg) and As⁵⁺ from aqueous solutions and removal of these metals from organic solvents using the unique thermomorphic properties of the fluorous ketone. In addition, a comprehensive ¹³C NMR study of one of the intermediates in the synthesis, 2H,2H,3H,3H-perfluoronanoic acid, has allowed the determination of all ¹J_C-F and ²J_C-F coupling constants. Also reported is the crystal structure of the acid CF₃(CF₂)₅CH₂CH₂CO₂H.     

Soluble and thermally stable polyamides bearing 1,1′-thiobis(2-naphthoxy) groups

A new-type of sulfide containing diacid (1,1′-thiobis(2-naphthoxy acetic acid)) was synthesized from 2-naphthol in three steps. Reaction of 2-naphthol with sulfur dichloride afforded 1,1′-thiobis(2-naphthol) (TBN). 1,1′-Thiobis(2-naphthoxy acetic ester) (TBNAE) was successfully synthesized by refluxing the TBN with methylcholoroacetate in the presence of potassium carbonate. The related diacid was synthesized by basic solution reduction of TBNAE. The obtained diacid was fully characterized and used to prepare novel thermally stable poly(sulfide ether amide)s via polyphosphorylation reaction with different aromatic diamines. The properties of these new polyamides were investigated and compared with similar polyamides. These polyamides showed inherent viscosities in the range of 0.39-0.87 dL g⁻¹ in N,N-dimethylacetamide (DMAc) at 30 °C and at a concentration of 0.5 g dL⁻¹. All the polyamides were readily soluble in a variety of polar solvents such as DMAc and tetrahydrofuran (THF). These polyamides showed glass transition temperature (T_g) between 241-268 °C. Thermogravimetric analysis measurement revealed the decomposition temperature at 10% weight loss (T₁₀) ranging from 441- 479 °C in argon atmosphere.     

A highly stereoselective total synthesis of (±)-isoalantolactone

(±)-Isoalantolactone (1) has been synthesized by a highly stereoselective route from the versatile bicyclic ketone, trans-5-methylene-9-methyl-2-decalone 2. Three major points in the synthesis involve (a) introduction of the acetic acid side chain; (b) stereoselective reduction of the ketone function yielding cis-lactone 6; and (c) introduction of the α-methylene group onto the butyrolactone ring.     

Kinetics and mechanism of the oxidation of some aliphatic ketones by n-bromoacetamide in acidic media

Kinetics of the oxidation of methyl ethyl ketone (MEK) and diethyl ketone (DEK) by N-bromoacetamide (NBA) have been studied in perchloric acid media in the presence of mercuric acetate. A zero order dependence to NBA and a first-order dependence to both ketones and H⁺ have been observed. Acetamide, mercuric acetate and sodium perchlorate additions have negligible effect while addition of acetic acid has a positive effect on the reaction rate. A solvent isotope effect (K₀D₂O/k₀H₂O = 2.–.4 and 2.2-2.5 for MEK and DEK, respectively) has been observed at 40°. Kinetic investigations have revealed that the order of reactivity is MEK > DEK. The rates were determined at four different temperatures and the activation parameters were evaluated. The main product of the oxidation is the corresponding 1,2-diketone. A suitable mechanism consistent with the above observations has been proposed.     

Kinetics and mechanism of benzyl <Emphasis Type="Italic">para</Emphasis>-chlorophenyl ketone oxidation

The oxidation of benzyl para-chlorophenyl ketone in chlorobenzene at 100°C occurs through the formation of short chains. Non-peroxide reaction products (1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone, para-chlorobenzyl, benzaldehyde, and para-chlorobenzoic acid) are formed not only by the transformation of hydroperoxide (1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone) but also (or solely) through the recombination of α-ketoperoxyl radicals with or without chain termination. α-Hydroperoxide decomposes predominantly through a heterolytic route to form para-chlorobenzoic acid and benzaldehyde. Benzaldehyde and 1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone undergo radical chain oxidation in the reaction medium to form benzoic acid (benzaldehyde), para-chlorobenzyl, and benzoic and para-chlorobenzoic acids (1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone). The homolytic decomposition of α-hydroperoxy ketone and α-hydroxy-α-hydroperoxy ketone causes the self-acceleration of the process and affords 1-(4-chlorophenyl)-2-hydroxy-2-phenyl-1-ethanone or, to a lesser extent, benzaldehyde and para-chlorobenzoic acid (α-hydroperoxy ketone). para-Chlorobenzoic acid substantially accelerates the heterolytic decomposition of α-hydroxy-α-hydroperoxy ketone and the oxidation of benzyl para-chlorophenyl ketone with peroxy acids to ester according to the Baeyer-Villiger mechanism. The rate constants of the main steps of the process and kinetic parameters are calculated by solving the inverse kinetic problem.     

Synthesis and anion binding studies of a new crown ether containing 2,2′-biimidazole

A novel crown ether which incorporates the 2,2′-biimidazole moiety was prepared by cyclization of 1,1′-dibenzyl-1H,1′H-[2,2′]biimidazolyl-4,4′-dicarboxylic acid and 4,7,10-trioxa-1,13-tridecanediamine followed by removal of the benzyl groups. The diacid has been obtained by hydrolysis of the diester previously prepared by alcoholysis of the corresponding dicyano biimidazole. The cyano group is introduced by a palladium-catalyzed procedure starting from the corresponding dibromo biimidazole. The macrocyclic structure of the N-dibenzylated derivative of the receptor has been studied by X-ray diffraction. Binding constants for 1:1 biimidazole–anion complexation (K_assoc) are on the order of 10⁵ M⁻¹ for H₂PO₄⁻ and Cl⁻.     

Conformational analysis—IV: A lanthanide induced shift (LIS) NMR investigation of the conformation and relative conformer energies of trans and cis 2-decalone

The solution conformation of trans-2-decalone and the conformational population of cis-2-decalone has been determined by LIS analysis. The angle of pucker (α) of the ketone ring in trans-2-decalone is 51 ± 2°, identical to that of cyclohexanone, but different from that determined for substituted decalones in the solid state, in which significant flattening of the ring occurs.The steroidal conformer of cis-2-decalone, when the latter is complexed to Yb(fod)₃ in CDCl₃, found to be preferred over the non-steroidal conformer by a ratio of 55:45, in contrast to the preference reported from the low temperature ¹³C NMR spectrum for the non complexed ketone in CH₂Cl₂. The two determinations can be combined to give the enthalpy difference in favor of the non-steroidal conformer of ca 0.8 kcal mole^?1.     

Kinetics and mechanism of oxidation of diethyl ketone by N-bromosuccinimide

Oxidative kinetics of diethyl ketone in perchloric acid media in the presence of mercuric acetate have been studied by using N-bromosuccinimide (NBS) as oxidant in the temperature range of 25°-50°C. It has been found that the order with respect to NBS is zero while with respect to diethyl ketone and [H⁺], it is unity. Succinimide, sodium perchlorate, and mercuric acetate have an insignificant effect on the reaction rate, while the dielectric effect was negative. A solvent isotope effect (k0_D2O/k0_H2O = 1.6–1.8) at 35°C has been observed. On the basis of the available evidences a suitable mechanism consistent with the experimental results has been proposed in which it is suggested that the mechanistic route for NBS oxidation in an acidic medium is through the enol form of the ketone. The magnitude of the solvent effect also supports the mechanism. Various activation parameters have been calculated, and the 1,2-dicarbonyl compound has been identified as the end product of the reaction.     

Palladium η3-allyl complex with sorbic acid: Kinetics and mechanism of protodemetalation in aqueous solutions

The allyl complex di-μ-chloro-bis[(1,2,3-η)-1-carboxy-3-(1-hydroxyethyl)allyl]dipalladium (which is a hydroxyl-containing palladium η³-allyl complex based on sorbic acid) has been synthesized from trans,trans-2,4-hexadienic (sorbic) acid and Na₂PdCl₄ in an aqueous solution. The complex has been isolated from the reaction solution and has been characterized by IR, ¹H NMR, and ¹³C NMR spectroscopy. Its composition has been determined by elemental analysis. The protodemetalation kinetics of the complex in aqueous solutions has been studied. The rate of this reaction obeys a second-order equation, first-order with respect to each reactant. A reaction mechanism has been derived from protodemetalation kinetics and data characterizing the state of the reactants.     

Gas‐phase synthesis of hydrodiphenylcyclopropenylium via nonclassical Favorskii rearrangement from alkali‐cationized α,α′‐dibromodibenzyl ketone

The gas‐phase synthesis of hydrodiphenylcyclopropenylium from alkali‐cationized α,α′‐dibromodibenzyl ketone (1) via nonclassical Lewis‐acid‐induced Favorskii rearrangement has been studied by electrospray ionization/tandem mass spectrometry (ESI‐MS/MS) and theoretical methods, showing that cations [1–Br]⁺ by debromination from 1 and 1 · M⁺(M = Li or Na) by alkali‐metal cationization of 1 could convert into the protonated diphenylcyclopropenone 2 · H⁺ by collision‐induced dissociation in the gas phase. A concerted mechanism for the Lewis‐acid‐induced Favorskii rearrangement from alkali‐metal‐cationized α,α′‐dibromodibenzyl ketone was proposed and studied, based on mass spectrometric results and theoretical methods. Copyright © 2010 John Wiley & Sons, Ltd.     

Kinetics and mechanism of oxidation of acetone,ethyl methyl ketone and diethyl ketone with chloramine-T in hydrochloric acid medium

The kinetics of oxidation of aliphatic ketones (acetone, ethyl methyl ketone and diethyl ketone) by chloramine-T in presence of hydrochloric acid (0.1 to 0.3M) have been investigated at 30 °C. The rate of disappearance of chloramine-T has been found to be first order each with respect to oxidant, ketone and [H⁺], in the range of the acid concentrations studied. The thermodynamic and kinetic parameters have been evaluated by determining the rate constants at different temperatures. The products of the reaction have been identified as chloroketones by their NMR spectra. The solvent isotope effect has been studied in the case of the oxidation of acetone and ethyl methyl ketone. A mechanism has been proposed.     

Synthesis and properties of thermally stable and optically active novel wholly aromatic polyesters containing a chiral pendent group

5-(2-Phthalimidyl-3-methyl butanoylamino)isophthalic acid (5), as a novel diacid monomer containing phthalimide and flexible chiral groups, was prepared by the reaction of 2-phthalimidyl-3-methyl butyric acid chloride (4) with 5-aminoisophthalic acid (5AIPA) in dry N,N-dimethylacetamide (DMAc). A series of novel polyesters (PE)s containing phthalimide group was prepared by the reaction of diacid monomer 5 with several aromatic diols via direct polyesterification with the tosyl chloride/pyridine/dimethylformamide (DMF) system as a condensing agent. The resulting new polymers were obtained in good yields with inherent viscosities ranging between 0.37 and 0.61 dL g⁻¹ and were characterized with FT-IR, ¹H NMR, elemental and thermogravimetric analysis techniques. These polymers are readily soluble in amide type solvents such as DMAc, DMF, 1-methyl-2-pyrrolidone, hexamethyl triaminophosphine, dimethyl sulfoxide and protic solvents such as sulfuric acid. Thermogravimetric analysis showed that the 10% weight loss temperature in a nitrogen atmosphere was more than 345 °C, which indicates that the resulting PEs have a good thermal stability as well as excellent solubility.     

Microwave-promoted synthesis of new optically active poly(ester-imide)s derived from N,N-(pyromellitoyl)-bis-l-leucine diacid chloride and aromatic diols

Pyromellitic dianhydride (benzene-1,2,4,5-tetracarboxylic dianhydride) (1) was reacted with l-leucine (2) in a mixture of acetic acid and pyridine (3:2) and the resulting imide-acid [N,N^′-(pyromellitoyl)-bis-l-leucine diacid] (4) was obtained in quantitative yield. The compound (4) was converted to the N,N^′-(pyromellitoyl)-bis-l-leucine diacid chloride (5) by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride (5) with several aromatic diols such as phenol phthalein (6a), bisphenol-A (6b), 4,4^′-hydroquinone (6c), 1,8-dihydroxyanthraquinone (6d), 1,5-dihydroxy naphthalene (6e), 4,4-dihydroxy biphenyl (6f), and 2,4-dihydroxyacetophenone (6g) was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as o-cresol. The polymerization reactions proceeded rapidly and are completed within 10 min, producing a series of optically active poly(ester-imide)s (PEIs) with good yield and moderate inherent viscosity of 0.10-0.27 dl/g. All of the above polymers were fully characterized by IR, elemental analyses and specific rotation. Some structural characterization and physical properties of these optically active PEIs are reported.     

A general approach to l-tyrosine porphyrins

A novel and general approach has been developed to prepare l-tyrosine-containing porphyrins. The key intermediates, 2-tert-butoxycarbonylamino-3-(3-formyl-4-hexyloxy-phenyl)-propionic acid hexyl ester and 2-tert-butoxycarbonylamino-3-(3-formyl-4-methoxy-phenyl)-propionic acid methyl ester, were prepared by the Reimer-Tiemann reaction of Boc-protected l-tyrosine, which was followed by esterification and alkylation of the phenol hydroxide. A number of novel chiral l-tyrosine porphyrins were obtained from the reactions of 2-tert-butoxycarbonylamino-3-(3-formyl-4-alkoxy-phenyl)-propionic acid ester with different dipyrrolylmethanes and the reaction of 5-(4-trifluoromethylphenyl)pyrromethane afforded the highest yield. The tyrosine porphyrins could be readily deprotected to afford the corresponding diacid or diamine derivatives.     

Novel optically active poly(amide-imide)s from N,N-(4,4-carbonyldiphthaloyl)-bis-l-phenylalanine diacid chloride and aromatic diamines by microwave irradiation

3,3^′,4,4^′-benzophenonetetracarboxylic dianhydride (4,4^′-carbonyldiphthalic anhydride) (1) was reacted with l-phenylalanine (2) in a mixture of acetic acid and pyridine (3:2) and the resulting imide-acid [N,N^′-(4,4^′-carbonyldiphthaloyl)-bis-l-phenylalanine diacid] (4) was obtained in high yield. The compound (4) was converted to the N,N^′-(4,4^′-carbonyldiphthaloyl)-bis-l-phenylalanine diacid chloride (5) by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride (5) with several aromatic diamines such as 4,4^′-diaminodiphenyl methane (6a), 2,4-diaminotoluene (6b), 4,4^′-sulfonyldianiline (6c), p-phenylenediamine (6d), 4,4^′-diaminodiphenylether (6e), m-phenylenediamine (6f), benzidine (6g) and 2,6-diaminopyridine (6h) was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as o-cresol. The polymerization reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 7 min, producing a series of optically active poly(amide-imide)s with high yield and inherent viscosity of 0.22-0.52 dl/g. All of the above polymers were fully characterized by IR, elemental analyses and specific rotation. Some structural characterization and physical properties of this optically active poly(amide-imide)s are reported.     

An Efficient Synthesis of Optically Active [4-13C] Labelled Quorum Sensing Signal Autoinducer-2

A new synthetic route for the quorum sensing signal Autoinducer-2 (AI-2) is described and used for the preparation of [4-¹³C]-AI-2 starting from [1-¹³C]-bromoacetic acid. The key step in this process was the enantioselective reduction of an intermediate ketone. This synthesis provides, selectively, both enantiomers of the labelled or unlabelled parent compound, (R) or (S)-4,5-dihydroxypentane-2,3-dione (DPD) and was used for an improved synthesis of [1-¹³C]-AI-2.     

Stereoselective synthesis of malyngic acid and fulgidic acid

A new stereoselective total synthesis of malyngic acid has been achieved from a known oxazolidinone derivative via eight steps involving the Evans asymmetric alkylation as the chirality-inducing step and chelation-controlled Zn(BH₄)₂ reduction of an α-hydroxy ketone intermediate for the installation of the 12,13-anti stereochemistry. Fulgidic acid, the C12-epimer of malyngic acid, has also been synthesized in eight steps from the same starting material by using syn-selective K-Selectride reduction of an α-alkoxy ketone intermediate.     

Quantitative goldbestimmung in filmmaterialien mittels flammenloser atomabsorption

A graphite rod electrothermal atomizer has been used for the AAS determination of traces of gold in hydrochloric and in hydrobromic acid solutions, and also after extraction into HBr-saturated methyl isobutyl ketone. Photographic film samples were decomposed first by enzyme action then by nitric acid/peroxide oxidation, and the gold was extracted into MIBK. For 10-μl aliquots of solution the 3s limits of detection were 3 × 10^?10g for aqueous solutions, 7 × 10^?10g for MIBK, and 7 × 10^?9 g/cm² for film.     

Novel thermally stable and chiral poly(amide-imide)s bearing from N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid: Synthesis and characterization

Novel optically active aromatic poly(amide-imide)s (PAIs) were prepared from newly synthesized N,N′-(4,4′-diphthaloyl)-bis-l-isoleucine diacid (3) via polycondensation with various diamines. The diacid was synthesized by the condensation reaction of 3,3′,4,4′-biphenyltetracarboxylic dianhydride (1) with l-isoleucine (2) in a mixture of acetic acid and pyridine (3:2 v/v). All the polymers were obtained in quantitative yields with inherent viscosities of 0.20-0.43 dL g⁻¹. All the polymers were highly organosoluble in solvents like N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), tetrahydrofuran, γ-butyrolactone, cyclohexanone and chloroform at room temperature or upon heating. These poly(amide-imide)s had glass transition temperatures between 198 and 231 °C, and their 10% weight-loss temperatures were ranging from 368 to 398 °C and 353 to 375 °C under nitrogen and air, respectively. The polyimide films had tensile strengths in the range of 63-88 MPa and tensile moduli in the range of 0.8-1.4 GPa. These poly(amide-imide)s possessed chiral properties and the specific rotations were in the range of −3.10° to −72.92°.