Asymmetric palladium-catalyzed benzylic nucleophilic substitution: high enantioselectivity with the DUPHOS family ligands

The asymmetric palladium-catalyzed benzylic reaction of 1-(2-naphthyl)ethyl acetate and its 6-methoxy substituted analogue with dimethyl malonate anion led to substitution products with up to 90% ee when the iPr-DUPHOS chiral ligand was used.     

Preparation of new chiral pyridine–phosphine ligands and their Pd-catalyzed asymmetric allylic alkylations

Enantiomerically pure 2-(diphenylphosphino)methyl-N-[1-(2-pyridinyl)ethyl]pyrrolidines 1 and 2 have been prepared by the stereospecific substitution of enantiomerically pure 1-(2-pyridinyl)ethyl methanesulfonate 6 with enantiomerically pure 2-(diphenylphosphino)methylpyrrolidine. Asymmetric allylic alkylation of 1,3-diphenyl-2-propenyl acetate 11 with dimethyl malonate sodium salt using the (S,S)-ligand 1 affords the (R)-product 12 with up to 86% e.e. in good yield.     

New long-chain-substituted polymeric metal-free and metallophthalocyanines by microwave irradiation: Synthesis and characterization

A tetranitrile monomer N,N-bis{2-[2-(3,4-dicyanophenoxy)ethoxy]ethyl}-4-methylbenzenesulfonamide (3) was synthesized by nucleophilic aromatic substitution of N,N-bis[2-(2-hydroxyethoxy)ethyl]-4-methylbenzenesulfonamide (1) onto 4-nitrophthalonitrile (2). The metal-free phthalocyanine polymer (4) was prepared by the reaction of a tetranitrile monomer 3 in 2-(dimethylamino)ethanol. Ni(II), Co(II) and Cu(II) phthalocyanine polymers were prepared by the reaction of the tetranitrile compound with the chlorides of Ni(II), Co(II) and Cu(II) in 2-(dimethylamino)ethanol (DMAE). The Zn(II)-phthalocyanine polymer was prepared by the reaction of the tetranitrile compound with the acetate of Zn(II) in DMAE. The new compounds were characterized by a combination of IR, ¹H NMR, ¹³C NMR, UV–Vis, elemental analysis and MS spectral data.     

Four-component tandem protocol for the stereoselective synthesis of highly functionalized [1,4]-thiazines

The one-pot, four-component tandem reaction of ethyl 2-[(2-oxo-2-arylethyl)sulfonyl]acetate/ethyl 2-[(2-ethoxy-2-oxoethyl)sulfonyl]acetate, an aromatic aldehyde and pyrrolidine provides a rapid and facile access to new ethyl 3-aroyl-1-benzyl-2,2-dioxo-4-aryloctahydro-2-pyrrolo[2,1-c][1,4]thiazine-1-carboxylates/diethyl 1-benzyl-2,2-dioxo-4-aryloctahydro-2-pyrrolo[2,1-c][1,4]thiazine-1,3-dicarboxylates. This reaction shows high stereoselectivity and proceeds in good yields.     

The relationship between properties of fluorinated graphite intercalates and matrix composition 7

Inclusion compounds (intercalates) of fluorinated graphite matrix with ethyl acetate (C₂F_xBr_z·yCH₃COOC₂H₅, x = 0.49, 0.69, 0.87, 0.92, z = 0.01) were prepared by guest substitution from acetonitrile to ethyl acetate. The kinetics of the thermal decomposition (the first stage of filling → the second stage of filling) was studied under isothermal conditions at 291–307 K. The relationship of the host matrices’ structure with inclusion compounds’ thermal properties and kinetic parameters is discussed.     

Extraction of aroma compounds in blackcurrant buds by alternative solvents: Theoretical and experimental solubility study

This study was designed to evaluate the performance of nine alternative solvents (α-pinene, MeTHF, ethyl acetate, methyl acetate, ethyl lactate, butanol, isopropanol, ethanol and CO₂ supercritical fluid) for extracting aromas from blackcurrant buds (Ribes nigrum L) compared to that of n-hexane, commonly used. This study has been performed via experimentation and simulation using Hansen solubility methodology for the comprehension of the dissolving mechanism. Experimentally, the extracts were analysed to compare the solvents performance in terms of aroma compositions. The results indicated that an alternative solvent, i.e. MeTHF, could be the most promising one for n-hexane substitution with good yield and selectivity of aromas.     

Modification of 2-trifluoromethyl-1H-benzimidazole with hydroxyalkyl substituents

Alkylation of 2-(trifluoromethyl)-1H-benzimidazole with 4-bromobutyl acetate gave 4-[2-(trifluoromethyl)-1H-benzimidazol-1-yl]butyl acetate which was deacylated by the action of hydrogen chloride in anhydrous ethanol. 4-[2-(Trifluoromethyl)-1H-benzimidazol-1-yl]butan-1-ol thus formed showed a moderate tuberculostatic activity. Alkylation of the title compound with chloromethyloxirane afforded a mixture of 1-chloro-3-[2-(trifluoromethyl)-1H-benzimidazol-1-yl]-propan-2-ol and 1-(oxiran-2-ylmethyl)-2-trifluoromethyl-1H-benzimidazole. A new procedure was proposed for the synthesis of 2-[(2-trifluoromethyl-1Hbenzimidazol-1-yl)methoxy]ethyl acetate.     

Synthesis of 5-acetyl derivatives of alkyl 2-furoates and 3-(2-furyl)acrylates

Methyl 5-acetyl-2-furoate has been prepared via oxidation of 5-(1-hydroxyethyl)-2-furoate with the Jones reagent. In turn, the starting compound has been synthesized via sequential chloroethylation of ethyl 2-furoate, substitution of chlorine with acetoxy group, and methanolysis of the acetate in presence of sodium methylate. The vinylog 2-furoate has been obtained as the major product via acetylation of ethyl 3-(2-furyl)-acrylate with acetic anhydride in the presence of magnesium perchlorate.

     

Preferential Solvation of Boscalid in Ethanol/Isopropanol + Ethyl Acetate Mixtures from the Inverse Kirkwood–Buff Integrals Method

The preferential solvation parameters (δx _1,3) of Boscalid in solvent mixtures of ethanol (1) + ethyl acetate (2), and isopropanol (1) + ethyl acetate (2) were derived from their available solubility data by means of the inverse Kirkwood–Buff integrals method. The values of δx _1,3 vary non-linearly with the solvent (1) proportion in the two solvent mixtures. For the ethanol (1) + ethyl acetate (2) system, the values of δx _1,3 are negative in ethanol-rich and ethyl acetate-rich mixtures, but positive in intermediate compositions; for the isopropanol (1) + ethyl acetate (2) system, the values of δx _1,3 are positive in ethyl acetate-rich mixtures and in intermediate compositions, but negative in isopropanol-rich mixtures. The δx _1,3 values are positive indicating that Boscalid is preferentially solvated by ethyl acetate. The magnitude of the preferential solvation of Boscalid by ethyl acetate is higher in isopropanol (1) + ethyl acetate (2) mixtures than in ethanol (1) + ethyl acetate (2) mixtures at 298.15, 308.15 and 313.15 K. The ethyl acetate action may be related to the disordered structure of ethanol or isopropanol molecules around the polar moieties of Boscalid, which increases the solvation, with maximum values near x ₁ = 0.40–0.45 for the two solvent mixtures.     

The preparation and resolution of 2-(2-pyridyl)- and 2-(2-pyrazinyl)-Quinazolinap and their application in palladium-catalysed allylic substitution

The preparation and resolution of two new axially chiral quinazoline-containing phosphinamine ligands, 2-(2-pyridyl)-Quinazolinap and 2-(2-pyrazinyl)-Quinazolinap, is described. The ligands were synthesised in good yield over eight steps and included two Pd-catalysed reactions, a Suzuki coupling to form the biaryl linkage and the introduction of the diphenylphosphino group, as the key transformations. The racemic ligands were resolved via the fractional crystallisation of diastereomeric palladacycles derived from (+)-di-μ-chlorobis{(R)-dimethyl[1-(1-naphthyl)ethyl]aminato-C₂,N}dipalladium (II) X-ray crystal structures of the (S,R)-2-pyridyl- and (S,R)-2-pyrazinyl-palladacycles are included. Displacement of the resolving agent by reaction with 1,2-bis(diphenylphosphino)ethane gave enantiopure 2-(2-pyridyl)-Quinazolinap and 2-(2-pyrazinyl)-Quinazolinap, new atropisomeric phosphinamine ligands for asymmetric catalysis. These ligands were applied in the palladium-catalysed allylic substitution of 1,3-diphenylprop-2-enyl acetate resulting in moderate conversions and enantioselectivities of up to 81%.     

Synthesis of α-(aminomethylene)-9-(methoxymethyl)-9H-purine-6-acetic acid derivatives

α-(Aminomethylene)-9-(methoxymethyl)-9H-purine-6-acetamide and the ethyl acetate, 3 and 8 , have been synthesized by catalytic hydrogenation of 6-cyanomethylene-9-methoxymethylpurine derivatives 2 and 7 which were obtained by the substitution of 6-chloro-9-(methoxymethyl)purine ( 1 ) with α-cyanoacetamide and ethyl cyanoacetate, respectively. Substitution of 3 and 8 with amines gave the corresponding N-substituted α-(aminomethylene)-9-(methoxymethyl)-9H-purine-6-acetamide and the ethyl acetate 4 and 10 . Reaction of 3 with piperidine gave 9-(methoxymethyl)-9H-purine-6-acetamide ( 5 ).     

Efficient synthesis of new 3-heteroaryl-1-functionalized 1H-indazoles

The efficient synthesis of novel 3-heteroaryl N-1-functionalized indazoles, via palladium cross-coupling reactions of ethyl (3-iodo-1H-indazol-1-yl)acetate with 2- and 3-pyrrolylboronic acids, 2-, 4- and 5-thiazolylstannanes, and other heteroarylmetallated derivatives are reported.     

Synthesis and methylation products of 4(5)-(2-furyl)imidazole

Bromination of 2-acetylfuran with copper(II) bromide in a mixture of ethyl acetate and chloroform leads selectively to furacyl bromide, the nucleophilic substitution of bromine in which by OAc and subsequent use of the Weidenhagen reaction enabled the synthesis of 4(5)-(2-furyl)imidazole. On N-methylation of this imidazole in KOH–acetone 2 isomers are formed, the 1-methyl-4- and 1-methyl-5-(2-furyl)imidazoles. It was established that, unlike alkylation of 4(5)-phenylimidazole, the main product of the reaction is 1-methyl-5-(2-furyl)imidazole.     

A tandem multi-component synthesis of 5,7-diaryl-5,6,7,8-tetrahydro-1H-pyrido[3,4-b][1,4]thiazin-2(3H)-ones

The five-component reaction of ethyl 2-[(2-oxopropyl)sulfanyl]acetate, aromatic aldehydes, and ammonium acetate affords two diastereomers of 5,7-diaryl-5,6,7,8-tetrahydro-1H-pyrido[3,4-b][1,4]thiazin-2(3H)-ones via a novel tandem Mannich-enamine-substitution sequence. Presumably, they are generated from ethyl 2-[(4-oxo-2,6-diaryl-3-piperidinyl)sulfanyl]acetates. During the formation of the trans-5,7-diaryl-5,6,7,8-tetrahydro-1H-pyrido[3,4-b][1,4]-thiazin-2(3H)-ones from ethyl 2-[(4-oxo-2,6-diaryl-3-piperidinyl)sulfanyl]acetates, the configuration at the carbon bearing an aryl group adjacent to the enamide CC double bond is inverted via ring opening and closure. When o-substituted benzaldehydes were employed in this reaction, 5,7-diaryl-5,6-dihydro-1H-pyrido[3,4-b][1,4]thiazin-2(3H)-ones were obtained via air oxidation, along with trans-5,7-diaryl-5,6,7,8-tetrahydro-1H-pyrido[3,4-b][1,4]-thiazin-2(3H)-ones.     

Novel tandem multi-component reactions in the stereoselective synthesis of highly functionalised pyrrolidines

The four-component reaction of ethyl 4-chloroacetoacetate with aromatic aldehydes and ammonium acetate in a 1:2:1 molar ratio provided a simple and rapid access to highly functionalised pyrrolidines, ethyl 1-acetyl-4-hydroxy-5-[hydroxy(aryl)methyl]-2-aryl-2,3-dihydro-1H-pyrrole-3-carboxylates stereoselectively. This transformation presumably occurs via a tandem Mannich-substitution-acetylation-aldol sequence of reactions.     

Syntheses of C1-symmetric bidentate ligands having pyridyl and 1,3-Thiazolyl, 1-methylimidazolyl or pyrazinyl donor groups for enantioselective palladium-catalyzed allylic substitution and copper-catalyzed cyclopropanation

New chiral C₁-symmetric bidentate ligands, which possess two different nitrogen heterocycles, 1,3-thiazolyl, 1-methylimidazolyl or pyrazinyl and one pyridyl group, were prepared by Kröhnke condensation in 36-59% overall yield. Stable Pd(II)-allyl and Cu(II) chloride complexes formed by some of the ligands were obtained in 60-65% yields. X-ray crystal structure analysis of a copper(II) complex having 1-methylimidazolyl group indicated that it is a μ-chloro bridge dimer. The Pd(II)-allyl complexes were found to be active catalysts in the asymmetric allylic substitution of 1,3-diphenylprop-2-enyl acetate. The best result observed was 85% e.e. and 99% isolated yield. In addition, the in situ generated Cu(OTf)₂ complexes were found to be active catalysts in cyclopropanation of styrene with ethyl diazoacetate.     

Chemo-enzymatic synthesis of (R)-5-hydroxymethyl-2-isopropyl-5-methylcyclopent-1-en-1-yl trifluoromethylsulfonate,a potential chiral building block for multicyclic terpenoids

The chemo-enzymatic synthesis of (R)-5-hydroxymethyl-2-isopropyl-5-methylcyclopent-1-en-1-yl trifluoromethylsulfonate, a potential chiral building block for polycyclic terpenoids containing a five–membered ring having isopropyl and angular methyl substituents, such as erinacin A and dolatriol, was achieved over 11 steps from ethyl 2-oxocyclopentane-1-carboxylate. The key synthetic precursor for this triflate was ethyl (1S,2R)-2-hydroxycyclopentanecarboxylate (>99% ee), which was prepared by a lipase-catalyzed enantioselective hydrolysis of the corresponding racemic acetate. The antipodal (S)-triflate is expected to be the synthetic intermediate for another group of terpenoids involving hamigeran B and stolonidiol. Enantiomerically pure (1R,2S)-hydroxyester (>99% ee) was prepared in high yield using the asymmetric reduction of the oxoester with commercially available carbonyl reductase, “Chiralscreen® OH”-E001.     

Synthesis of the dibenzopyrrocoline alkaloid skeleton: indolo[2,1-a]isoquinolines and related analogues

The indolo[2,1-a]isoquinoline and pyrrolo[2,1-a]isoquinoline nuclei have been synthesized from N-benzylindole or ethyl 1H-indol-1-ylacetate and N-benzylpyrrole precursors, respectively. Firstly, at C-2 of either the indole or pyrrole nucleus, aromatic rings containing a carbonyl substituent ortho to the newly formed biaryl axis were introduced using the Suzuki-Miyaura coupling reaction. Thereafter, under basic conditions the nucleophile that formed at the acidic methylene protons of the N-benzylindole, ethyl 1H-indol-1-ylacetate or N-benzylpyrrole intermediate reacted with the internal aromatic carbonyl to yield (after the expulsion of water) the title compounds. For example, exposure of ethyl 2-(2-(2-formylphenyl)-1H-indol-1-yl)acetate to potassium tert-butoxide resulted in the formation of ethyl indolo[2,1-a]isoquinoline-6-carboxylate.     

Enantiodivergence in alkylation of 1-(6-methoxynaphth-2-yl)ethyl acetate by potassium dimethyl malonate catalyzed by chiral palladium-DUPHOS complex

Alkylation of racemic 1-(6-methoxynaphth-2-yl)ethyl acetate by potassium dimethyl malonate catalyzed by a chiral palladium-DUPHOS complex afforded the substitution product with 87% ee, along with 6-methoxy-2-vinylnaphthalene that arose from an elimination process, in a 43/57 substitution/elimination ratio. The reaction performed on a mixture of quasi-enantiomeric substrates provided insight into the stereochemical course of the reaction, establishing that—for a given enantiomer of the catalyst, one enantiomer of the substrate afforded mainly the substitution product whereas the other enantiomer underwent elimination.     

Chiral amido- and diamidophosphites with a peripheral pyridine ring in Pd-catalyzed asymmetric allylation

New chiral amidophosphite and diamidophosphite ligands with exocyclic pyridyl-containing substituents were obtained. Their efficiency in the Pd-catalyzed enantioselective allylic substitution was compared: in the sulfonylation of (E)-1,3-diphenylallyl acetate with sodium p-toluenesulfinate, the ee can reach 77%; its alkylation with dimethyl malonate and amination with pyrrolidine gave up to 80% and 74% ee, respectively. The asymmetric alkylation of cinnamyl acetate with ethyl 2-oxocyclohexanecarboxylate can provide to 68% ee. The complexation of zinc(ii) 5,10,15,20-tetraphenylporphyrinate with diamidophosphite ligand and its influence on conversion and enantioselectivity of the process were studied.