Pyrrolo-annelated tetrathiafulvalenes: the parent systems

The synthesis of a number pyrrolo-annelated tetrathiafulvalenes, including the parent bis(pyrrolo[3,4-d])tetrathiafulvalene (7) is decribed. Starting from readily available 4,5-bis(bromomethyl)-1, 3-dithiole-2-thione (14) and sodium tosylamide, the parent 7 and the asymmetric monopyrrolo tetrathiafulvalenes 23a,b were prepared in good yields via a nonclassical and simple pyrrole synthesis. Furthermore, a series of asymmetrical N-alkylated monopyrrolo/monodihydropyrrolotetrathiafulvalenes was prepared starting from primary amines and 14. A detailed study of the fundamental redox behavior of this class of heterocycles is reported. NMR spectroscopy, cyclic voltammetry, and PM3 MO calculations revealed that the pyrrolo-annelated tetrathiafulvalenes have highly extended pi-surfaces. The X-ray crystallographic analyses of the monopyrrolo tetrathiafulvalenes 22b and 24b, together with preliminary formation of a charge-transfer complex between the parent donor 7 and TCNQ, are also reported.     

Electrochemical recognition of cations by bis(pyrrolo)tetrathiafulvalene macrocycles

[structure: see text] Tetrathiafulvalene redox-responsive ligands devoid of cis/trans isomerism containing the electroactive bis(pyrrolo[3,4-d])tetrathiafulvalene moiety and polyether subunits have been synthesized. One ligand exhibits high binding affinities for Pb2+ and Ba2+ cations as shown by independent methods (1H NMR, UV-vis spectroscopy, and cyclic voltammetry). The ability of this receptor to electrochemically recognize Pb2+ and Ba2+ is shown by cyclic voltammetry.     

Bis(dithiomethyl-tetrathiafulvalene) with two phenyl-phosphino bridges

The single crystal X-ray structure of the precursor dithiomethyl-tetrathiafulvalene (MeS)₂TTF is reported, together with theoretical calculations at DFT level, which afforded two energy minima corresponding to cis and trans orientations of the thiomethyl substituents. The bis(tetrathiafulvalene) reaction of this TTF derivative followed by the reaction with phenyldichlorophosphine provides a new rigid bis(tetrathiafulvalene [TTF]) containing a 1,4-dihydro-1,4-diphosphinine ring between the two redox active units. Its solid-state structure, determined by single crystal X-ray diffraction analysis, shows the coexistence of both cis and trans isomers. Cyclic voltammetry measurements are in accordance with the existence of a communication between the two TTFs, as illustrated by the splitting of the oxidation waves.     

“桥式”双四硫富瓦烯衍生物的合成及电化学行为

循环伏安法;紫外-可见光谱法;“桥式”双四硫富瓦烯衍生物的合成及电化学行为     

Molecular and Crystal Structure Diversity,and Physical Properties of Tetrathiafulvalene Derivatives Substituted with Various Aryl Groups through Sulfur Bridges

A library of tetrathiafulvalene (TTF) derivatives ( TTF‐1 – TTF‐47 ) bearing aryl groups attached through sulfur bridges has been created. The peripheral aryl groups exert a significant influence on both the electronic and crystallographic properties of the resulting TTFs. These TTFs display broad absorption bands at 400–500 nm caused by intramolecular charge‐transfer transitions between the aryl groups and central TTF core, and their first redox potentials increase with increasing electron‐withdrawing ability of the aryl groups. In their crystal structures (22 examples), the central TTF cores adopt various conformations, including chair, half‐chair, boat, and planar conformations. Moreover, the peripheral aryl groups exhibit multiple alignment modes with respect to the central TTF core, caused by their rotation about the two C? S bonds of the sulfur bridges. The packing motifs of these TTFs depend on both the nature of the aryl groups and their spatial alignment modes. Driven by intermolecular van der Waals forces and π–π interactions between the aryl groups and between the aryl groups and the TTF core, these TTFs adopt various packing structures. As a typical example, TTF‐14 , an achiral molecule, adopts a helical chain stack through intermolecular atomic close contacts. Moreover, the molecular geometries and packing motifs of these TTFs are sensitive to environmental variation, as exemplified by TTF‐28 , which adopts three distinct crystal modifications with diverse molecular geometries and stacking modes under different crystallization conditions. This work indicates that these TTFs are potential candidates as electronic materials, as well as functional building blocks for supramolecular assembly.     

Redox Multifunctionality in a Series of PtII Dithiolene Complexes of a Tetrathiafulvalene‐Based Diphosphine Ligand

The redox‐active and chelating diphosphine, 3,4‐dimethyl‐3′,4′‐bis(diphenylphosphino)‐tetrathiafulvalene, denoted as P2 , is engaged in a series of platinum complexes, [(P2)Pt(dithiolene)], with different dithiolate ligands, such as 1,2‐benzenedithiolate (bdt), 1,3‐dithiole‐2‐thione‐4,5‐dithiolate (dmit), and 5,6‐dihydro‐1,4‐dithiin‐2,3‐dithiolate (dddt). The complexes are structurally characterized by X‐ray diffraction, together with a model compound derived from bis(diphenylphosphino)ethane, namely, [(dppe)Pt(dddt)] . Four successive reversible electron‐transfer processes are found for the [(P2)Pt(dddt)] complex, associated with the two covalently linked but electronically uncoupled electrophores, that is, the TTF core and the platinum dithiolene moiety. The assignments of the different redox processes to either one or the other electrophore is made thanks to the electrochemical properties of the model compound [(dppe)Pt(dddt)] lacking the TTF redox core, and with the help of theoretical calculations (DFT) to understand the nature and energy of the frontier orbitals of the [(P2)Pt(dithiolene)] complexes in their different oxidation states. The first oxidation of the highly electron‐rich [(P2)Pt(dddt)] complex can be unambiguously assigned to the redox process affecting the Pt(dddt) moiety rather than the TTF core, a rare example in the coordination chemistry of tetrathiafulvalenes acting as ligands.     

The Introduction of Pyrrolotetrathiafulvalene into Conjugated Architectures: Synthesis and Electronic Properties

A series of new conjugated copolymers incorporating the redox‐active pyrrolo‐TTF unit has been synthesised. The properties of the polymers have been investigated by cyclic voltammetry and electronic absorption spectroscopy, revealing that the pyrrolo‐TTF behaves very differently to its thieno‐TTF variant. In comparison to thieno analogues, the band gaps of the new polymers are wider than expected due to a decrease in the polarizability of the heteratom (nitrogen vs. sulfur) and steric interactions between repeat units. Whilst the pyrrolo‐TTF units are stronger electron donors than thieno‐TTFs in related structures, the two redox active elements of the new polymers (TTF and conjugated chain) function independently under oxidative conditions.

     

Synthesis,structure and electrochemical properties of two new unsymmetrical tetrathiafulvalene derivatives

Two new unsymmetrical tetrathiafulvalene (TTF) derivatives, 2,3‐bis(cyanoethylthio)‐6,7‐(methyl‐ethylenedithio)tetrathiafulvalene ( 6a ) and 2,3‐bis(cyanoethylthio)‐6,7‐(cyclopentodithio)tetrathiafulvalene ( 6b ), have been prepared and characterized by NMR, MS, IR and Elemental analyses. The molecular structures have been determined by X‐ray crystallography. Their redox properties have been investigated by cyclic voltammetry in dichloromethane solution and each compound shows two reversible single‐electron redox couples.     

Calix[4]arenes with 1,2- and 1,3-upper rim tetrathiafulvalene bridges

Herein we report the synthesis of several calix[4]arene derivatives with tetrathiafulvalene bridges at the upper rim. Calix[4]arene-tetrathiafulvalene (TTF) conjugates 4a–d, fixed in cone conformation and comprising two smaller 1,2-bridges, were prepared by cyclisation of tetrakis-chloromethylated calix[4]arene 1 with 2,3-dithiolates of TTFs. Larger calix[4]arene-TTF macrocycles 14 and 15, also in cone conformation, contain 1,3-bridges and were synthesised by cyclisation of 2,6- and 2,7-dithiolates of TTFs with bis-bromomethylated calix[4]arene 7. Redox properties of new calix[4]arene-TTF conjugates were characterised using cyclic voltammetry.     

Synthesis and unusual chemical reactivity of certain novel 4,5-disubstituted 7-benzylpyrrolo[2,3-d][1,2,3]triazines.

The fact that only two pyrrolo[2,3-d][1,2,3]triazines heterocycles had been reported in the literature prompted us to initiate studies designed to provide additional members of this ring system. Initial attempts to prepare additional derivatives of the 7-unsubstituted pyrrolo[2,3-d][1,2,3]triazin-4-ones were limited by their low chemical reactivity. Subsequently, 7-benzyl-5-carboxamidopyrrolo[2,3-d][1,2,3]triazin-4-one (16) was prepared from diethyl 2-nitropyrrole-3,4,-dicarboxylate via an alkylation, ammonolysis, reduction and intramolecular diazocoupling sequence. Conversion of 16 into 7-benzyl-4-(1,2,4-triazol-1-yl)pyrrolo[2,3-d][1,2,3]triazine-5-carbonitrile (17) was accomplished, and nucleophilic displacements of the 4-triazol-1-yl group were studied. Treatment of 17 with NH3/CH3CN gave a mixture of 4-amino-7-benzylpyrrolo[2,3-d][1,2,3]triazine-5-carbonitrile (19) and 2-amino-1-benzylpyrrole-3,4-dicarbonitrile (21). A mechanism to account for the formation of this mixture is described along with studies on the effect that ammonia concentration and a TFA catalyst have on the product ratio. Compound 19 was converted into the 5-carboxamide and 5-thioamide derivatives of 19.     

Electron-rich tetrathiafulvalene-triarylamine conjugates: synthesis and redox properties

By combining tetrathiafulvalenes (TTFs) and triarylamines, four TTF-triarylamine conjugates bridged by an annulated pyrrole ring were designed and synthesized by an N-arylation reaction. Electrochemical and photophysical investigations suggest that these novel conjugates possess very strong electron-donating ability with very high HOMO energy levels of around -4.70 eV; the HOMOs are mainly located on the TTF moiety. We observed significant electronic coupling between the TTF moieties and the triarylamine groups. However, no evidence for such electronic communication between end-capping TTF units (conjugates 5 and 7) or between two terminal triarylamine groups (conjugate 9) could be found. Differential scanning calorimetry (DSC) measurements together with PM3-optimized geometries suggest that conjugates 5 and 7, which adopt three-dimensional propeller-shaped structures, may easily pack and crystallize in the solid state because of the large rigid planar blades consisting of TTF and one of the phenyl rings of the triarylamine moiety. However, conjugate 9, with two bulky end-capping triarylamine groups, forms an amorphous material with a glass transition at 74.5 degrees C.     

Tetrathiafulvalene-functionalized triptycenes: synthetic protocols and elucidation of intramolecular Coulomb repulsions in the oxidized species

A large selection of triptycenes functionalized with tetrathiafulvalene (TTF) units as well as triptycenes containing extended TTFs as a part of the triptycene core have been synthesized utilizing new triptycene di- and tetraaldehydes as well as bis-, tetrakis- and hexakis(bromomethyl) derivatives. The largest scaffold contains a total of 12 TTFs around the central triptycene core. From spectroelectrochemical and chemical oxidation studies, we have elucidated the extent to which an increasing number of electrostatic interactions among oxidized TTF units exert an influence on the absorption characteristics.     

具有纳米尺寸的四聚四硫富瓦烯大环冠醚的合成

以二(碘乙基)醚和2,3-二氰乙硫基四硫富瓦烯衍生物作为起始原料, 采用腈乙基保护与脱保护技术, 通过多步反应以较好的收率合成了两个纳米结构的大环四硫富瓦烯冠醚5a～5b. 通过循环伏安法(CV)研究了化合物4b和5b的电化学性质, 并用¹H NMR谱研究了5b与[60]富勒烯之间的相互作用. 结果表明: 5b存在环结构效应, 与[60]富勒烯有一定程度的电荷转移相互作用.     

Pyrrolo[2,3-d]pyrimidine thymidylate synthase inhibitors: design and synthesis of one-carbon bridge derivatives

A series of novel pyrrolo[2,3-d]pyrimidine derivatives was designed and synthesized as thymidylate synthase (TS) inhibitors. Molecular design was performed on the human TS complex model built on the basis of the reported structure of TS-deoxyuridinemonophosphate (dUMP)-CB3717 ternary complex. From a docking study, we expected that a one-carbon bridge between pyrrolo[2,3-d]pyrimidine and an aromatic ring was suitable. Moreover, we found that the bridge carbon could be replaced with an alkyl group to fill out the unoccupied space. Based on this design, we synthesized five pyrrolo[2,3-d]pyrimidine derivatives with one-carbon bridge and evaluated their TS inhibitory activities. All synthesized compounds inhibited TS more potently than compound 2 (LY231514), and the C8-ethyl analogue (7) showed a remarkable inhibitory activity against TS (IC50=0.017 microM).     

Building up 1‐D, 2‐D,and 3‐D Polyiodide Frameworks by Finely Tuning the Size of Aryls on Ar‐S‐TTF in the Charge‐Transfer (CT) Complexes of Ar‐S‐TTFs and Iodine

The arylthio‐substituted tetrathiafulvalenes (Ar‐S‐TTFs) are electron donors having three reversible states, neutral, cation radical, and dication. The charge‐transfer (CT) between Ar‐S‐TTFs ( TTF1 — TTF3 ) and iodine (I₂) is reported herein. TTF1 — TTF3 show the CT with I₂ in the CH₂Cl₂ solution, but they are not completely converted into cation radical state. In CT complexes of TTF1 — TTF3 with I₂, the charged states of Ar‐S‐TTFs are distinct from those in solution. TTF1 is at cation radical state, and TTF2 — TTF3 are oxidized to dication. The iodine components in complexes show various structures including 1‐D chain of V‐shaped (I₅)^–, and 2‐D and 3‐D iodine networks composed of I₂ and (I₃)^–.     

Synthesis,Structure, Optical,and Electrochemical Properties of Triple‐ and Quadruple‐Decker Co‐facial Tetrathiafulvalene Arrays

Understanding the details of the electronic structure in face‐to‐face arranged tetrathiafulvalenes (TTFs) is very important for the design of supramolecular functional materials and superior conductive organic materials. This article is a comprehensive study of the interactions among columnar stacked TTFs using trimeric (trimer) and tetrameric (tetramer) TTFs linked by alkylenedithio groups (‐S(CH₂)_nS‐, n=1–4) as models of triple‐ and quadruple‐decker TTF arrays. Single‐crystal X‐ray analyses of neutral trimeric TTFs revealed that the three TTF moieties are oriented in a zigzag arrangement. Cyclic voltammetry measurements (CV) reveal that the trimer and tetramer exhibited diverse reversible redox processes with multi‐electron transfers, depending on the length of the ‐S(CH₂)_nS‐ units and substituents. The electronic spectra of the radical cations, prepared by electrochemical oxidation, showed charge resonance (CR) bands in the NIR/IR region (1630–1850 nm), attributed to a mixed valence (MV) state of the triple‐ and quadruple‐decker TTF arrays. In the trimeric systems, the dicationic state (+2; 0.66 cation per TTF unit) was found to be a stable state, whereas the monocationic state (+1) was not observed in the electronic spectra. In the tetrameric system, substituent‐dependent redox processes were observed. Moreover, π‐trimers and π‐tetramers, which show a significant Davydov blueshift in the spectra, are formed in the tricationic (trimer) and tetracationic (tetramer) state. In addition, these attractive interactions are strongly dependent on the length of the linkage unit.     

Tetrathiafulvalene Belts with Large Cavities

The latest member of the cyclophane family, the macrotricyclic tetrathiafulvalene (TTF) “belt”, is now available. A general synthetic strategy for the construction of tetraconnected belt-type TTFs (shown schematically) has been developed, made possible by the use of a TTF with two different protecting groups. In the solid-state structure of one of the three TTF-belts prepared two chloroform molecules reside inside the spacious cavity.     

Synthesis and michael reaction of 3,4-dimethylpyrrole

A two step synthesis of 3,4-dimethylpyrrole via the reduction of 3-carboethoxy-4-methyl-pyrrole is described. Michael addition of methyl vinyl ketone and butyn-2-one to 3,4-dimethylpyrrole gives the bisadducts, 2,5-bis(3-oxobutyl)-3,4-dimethylpyrrole and 2,5-bis(3-oxobutenyl)-3,4-dimethylpyrrole, respectively, while ethyl propiolate affords only the monoadduct, ethyl 3-(3,4-dimethylpyrrol-2-yl)propenoate. Catalytic reduction of the latter ester gives ethyl 3-(3,4-dimethylpyrrol-2-yl)propanoate which with ethyl propiolate gives ethyl 3-(5-carbethoxyethyl-3,4-dimethyl-2-yl)propenoate.     

Synthesis of New Polyfused Thienopyrimidine,Thienopyridine, Thienothiazine,Thienoxazine, and Thienodiazepine Derivatives

3,4-Diamino-2-carbethoxy-5-cyanothieno(2,3-b)thiophene (1) was treated with ethylenediamine to afford 3,4-diamino-2,5-bi[2-(4,5-dihydro-1H-imidazole-2-yl]-thieno(2,3-b)thiophene 2 , which in turn was treated with chloroacety chloride to give bis[imidazolothieno diazepine] derivative 3 and with each of p-chlorobenzaldehyde, triethyl orthoformate, and Lawesson's reagent (LR) to yield bis[imidazolothienopyrimidine] derivatives 4-6 . Compound 1 was subjected to Mannich reaction to afford Mannich bases 7 and 8a , b . The later products ( 8a , b ) were treated with malononitrile yielding 9a and 9b . Treatment of compound 1 with CS 2 , NaOH and CH 3 I produced compounds 10 and 11 . The reaction of compound 10 with each of o-aminothiphenal, o-phenylenediamen, hydrazine hydrate, and phenylhydrazine afforded compounds 12a , b , 13a , b . Compound 1 was allowed to react with CS 2 , phenyl (benzoyl)isothiocyanate and phenylisocyanate to get the described products 14-19 , respectively. On reacting compound 1 with ethylcyanoacetate thieno(2,3-b)pyridine derivative 21 was obtained through the intermediate 20 . Finally, compound 1 was treated with malononitrile to yield compound 22 .     

Reactions of some new thienothiophene derivatives

Facile and convenient syntheses of bisdimethylthieno[2,3-b]thiophen-2,5-diyl bis(oxazole-2-amine), bis(1H-imidazol-2-amine), bis((3a)-H-indole),[1,2-a]pyrimidine), bis(1H-imidazo[1,2-b][1,2,4]triazole) and bis(9H-benzo[d]imidazo[1,2-a]imidazole) derivatives incorporating a thieno[2,3-b]thiophene moiety from the versatile and readily accessible 1,1'(3,4-dimethylthieno[2,3-b]thiophene-2,5-diyl)-bis(2-bromo-ethanone) (1) are described.