Electrochemical Sensor for Sensitive Determination of Capsaicin Using Pd Decorated Reduced Graphene Oxide

In this work, the reduced graphene oxide functionalized with poly dimethyl diallyl ammonium chloride (PDDA) modified palladium nanoparticles (PDDA‐rGO/Pd) had been facile synthesized and used as the sensing layer for sensitive determination of capsaicin. The prepared composite was characterized by transmission electron microscopy, UV‐visible absorption spectroscopy. The image demonstrated that Pd nanoparticles were uniformly distributed on the graphene surface. The electrochemical properties of the prepared sensor were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results showed that the nanocomposite exhibits attractive electrocatalytic activity towards the oxidation of capsaicin. This attributed to the synergistic action of the excellent properties of Pd nanoparticles and graphene nanosheets. Under optimized conditions, the electrochemical sensor possessed a dynamic linear range from 0.32 μM to 64 μM with a detection limit of 0.10 μM (S/N=3) for capsaicin detection. Moreover, the cost‐effective and simple fabrication procedure, good reproducibility and stability as well as acceptable accuracy for capsaicin determination in actual samples are also the main advantages of this method, which might have broad application in other amide alkaloid detection.     

Poly(diallydimethylammonium chloride) Functionalized Graphene/Double‐walled Carbon Nanotube Composite for Amperometric Determination of Nitrite

Poly(diallydimethylammonium chloride) functionalized graphene/double‐walled carbon nanotube composite (PDDA‐GN/DWCNT) was synthesized by a facile microwave‐assisted reduction reaction. PDDA‐GN/DWCNT exhibits enhanced electrocatalytic activity towards nitrite oxidation. The direct electrooxidation behaviors of nitrite on PDDA‐GN/DWCNT were investigated by cyclic voltammetry, amperometric i‐t curve, and rotating disk electrode experiments. Under the optimum conditions, PDDA‐GN/DWCNT was applied to the quantitative analysis of nitrite with a wide linear range covering 0.07–3000 µM and a low detection limit of 0.03 µM (S/N=3). Moreover, PDDA‐GN/DWCNT exhibits satisfied results in the determination of nitrite that released from breast cancer cells.     

Preparation of a Reduced Graphene Oxide Wrapped Lithium‐Rich Cathode Material by Self‐Assembly

A lithium‐rich cathode material wrapped in sheets of reduced graphene oxide (RGO) and functionalized with polydiallyldimethylammonium chloride (PDDA) was prepared by self‐assembly induced from the electrostatic interaction between PDDA–RGO and the Li‐rich cathode material. At current densities of 1000 and 2000 mA g^?1, the PDDA–RGO sheet wrapped samples demonstrated increased discharge capacities, increasing from 125 to 155 mA h g^?1 and from 82 to 124 mA h g^?1, respectively. The decreased resistance implied by this result was confirmed from electrochemical impedance spectroscopy results, wherein the charge‐transfer resistance of the pristine sample decreased after wrapping with the PDDA–RGO sheets. The PDDA–RGO sheets served as a protective layer sand as a conductive material, which resulted in an improvement in the retention capacity from 56 to 81 % after 90 cycles.     

Stabilization of Palladium Nanoparticles on Nanodiamond–Graphene Core–Shell Supports for CO Oxidation

Nanodiamond–graphene core–shell materials have several unique properties compared with purely sp²‐bonded nanocarbons and perform remarkably well as metal‐free catalysts. In this work, we report that palladium nanoparticles supported on nanodiamond–graphene core–shell materials (Pd/ND@G) exhibit superior catalytic activity in CO oxidation compared to Pd NPs supported on an sp²‐bonded onion‐like carbon (Pd/OLC) material. Characterization revealed that the Pd NPs in Pd/ND@G have a special morphology with reduced crystallinity and are more stable towards sintering at high temperature than the Pd NPs in Pd/OLC. The electronic structure of Pd is changed in Pd/ND@G, resulting in weak CO chemisorption on the Pd NPs. Our work indicates that strong metal–support interactions can be achieved on a non‐reducible support, as exemplified for nanocarbon, by carefully tuning the surface structure of the support, thus providing a good example for designing a high‐performance nanostructured catalyst.     

Palladium nanoparticles deposited on a graphene–benzimidazole support as an efficient and recyclable catalyst for aqueous‐phase Suzuki–Miyaura coupling reaction

Graphene oxide was functionalized with benzimidazole for palladium immobilization. The resultant graphene–benzimidazole‐supported palladium composite (G‐BI‐Pd) was characterized using infrared and Raman spectroscopies, transmission electron microscopy and energy‐dispersive X‐ray spectroscopy. G‐BI‐Pd showed excellent catalytic activity and fast reaction kinetics in the aqueous‐phase Suzuki–Miyaura reaction of aryl iodides and bromides with phenylboronic acid under relatively mild conditions (5–25 min, 80 °C). The catalyst can be used several times without any significant loss of its catalytic activity.     

Buchwald‐Hartwig amination reaction of aryl halides using heterogeneous catalyst based on Pd nanoparticles decorated on chitosan functionalized graphene oxide

In this work, graphene oxide was functionalized with chitosan (GO‐Chit) followed by a simple approach for immobilization of palladium nanoparticles onto a chitosan grafted graphene oxide surface. The Pd‐nanocomposite (GO‐Chit‐Pd) was characterized using Transmission Electron Microscopy (TEM), Fourier transforms infrared spectroscopy (FT‐IR), and X‐ray diffraction (XRD) measurements. The catalytic activity of the prepared heterogeneous graphene oxide functionalized chitosan‐palladium (GO‐Chit‐Pd) was investigated in term of C‐N coupling reaction (Buchwald‐Hartwig amination reaction of aryl halides) yielding products of N‐arylamines. The easy purification, convenient operation, and environmental friendliness, combined with a high yield, render this method viable for use in both laboratory research and larger industrial scales. Studying the reusability of the catalyst in this work showed that it could be reused for five times without obvious loss in catalytic activity.     

Three‐Dimensional Nitrogen‐Doped Reduced Graphene Oxide–Carbon Nanotubes Architecture Supporting Ultrafine Palladium Nanoparticles for Highly Efficient Methanol Electrooxidation

A three‐dimensional (3D) nitrogen‐doped reduced graphene oxide (rGO)–carbon nanotubes (CNTs) architecture supporting ultrafine Pd nanoparticles is prepared and used as a highly efficient electrocatalyst. Graphene oxide (GO) is first used as a surfactant to disperse pristine CNTs for electrochemical preparation of 3D rGO@CNTs, and subsequently one‐step electrodeposition of the stable colloidal GO–CNTs solution containing Na₂PdCl₄ affords rGO@CNTs‐supported Pd nanoparticles. Further thermal treatment of the Pd/rGO@CNTs hybrid with ammonia achieves not only in situ nitrogen‐doping of the rGO@CNTs support but also extraordinary size decrease of the Pd nanoparticles to below 2.0 nm. The resulting catalyst is characterized by scanning and transmission electron microscopy, X‐ray diffraction, Raman spectroscopy, and X‐ray photoelectron spectroscopy. Catalyst performance for the methanol oxidation reaction is tested through cyclic voltammetry and chronoamperometry techniques, which shows exceedingly high mass activity and superior durability.     

Pd/PEI-GNs复合材料的制备及对对硝基苯酚的电催化还原性能

以聚乙烯亚胺(PEI)功能化的石墨烯(PEI-GNs)为载体, 利用电化学还原法制备了Pd/PEI-GNs复合物. 采用红外光谱仪、 X射线光电子能谱仪、 X射线粉末衍射仪和扫描电子显微镜等对复合物的组成、 结构和形态进行了表征. 结果表明, Pd/PEI-GNs复合物中Pd颗粒均匀分散在PEI-GNs基底上. 采用循环伏安法、 交流阻抗法和计时电流法等电化学方法研究了Pd/PEI-GNs复合物的电化学性能. 结果表明, 制备的复合物催化剂对对硝基苯酚还原具有较好的催化活性和稳定性, 这主要是由于Pd纳米颗粒在PEI-GNs载体上均匀分散以及PEI-GNs优异的电子传递能力.     

Tailored Synthesis of Various Nanomaterials by Using a Graphene‐Oxide‐Based Gel as a Nanoreactor and Nanohybrid‐Catalyzed CC Bond Formation

New graphene oxide (GO)‐based hydrogels that contain vitamin B₂/B₁₂ and vitamin C (ascorbic acid) have been synthesized in water (at neutral pH value). These gel‐based soft materials have been used to synthesize various metal nanoparticles, including Au, Ag, and Pd nanoparticles, as well as nanoparticle‐containing reduced graphene oxide (RGO)‐based nanohybrid systems. This result indicates that GO‐based gels can be used as versatile reactors for the synthesis of different nanomaterials and hybrid systems on the nanoscale. Moreover, the RGO‐based nanohybrid hydrogel with Pd nanoparticles was used as an efficient catalyst for C? C bond‐formation reactions with good yields and showed high recyclability in Suzuki–Miyaura coupling reactions.     

Electrochemical Immunosensor for Ultrasensitive Detection of Human Chorionic Gonadotropin Based on Pd@SBA‐15

A simple and sensitive electrochemical immunosensor was conducted for the determination of human chorionic gonadotropin (hCG) with Pd@SBA‐15. Thionine (TH) was selected as an electron transfer mediator, and modified onto the electrode together with functionalized graphene nanomaterial (HSO₃^?GS) through electrostatic adsorption. Then Pd@SBA‐15 was immobilized onto the as‐prepared film for biomolecules anchoring. Pd@SBA‐15 composites not only retain the good biocompatibility of the SBA‐15, but also exhibit an excellent catalytic activity of Pd and low Pd leaching. hCG antibody was immobilized onto the composite film for the detection of hCG. hCG can be determined in the range of 0.01–16.00 ng/mL and the detection limit is 8.60 pg/mL. The method has been applied to the analysis of hCG in human serum samples with satisfactory results.     

The reduction of 4‐nitrophenol and 2‐nitroaniline by palladium catalyst based on a KCC‐1/IL in aqueous solution

KCC‐1/IL/Pd NPs can used as an excellent support for the synthesis of highly sparse homogeneous catalyst. KCC‐1 has high surface area that was functionalized with ionic liquid phase acting as the strong performers so that the Pd catalyst was well‐dispersed without aggregation on the framework of the KCC‐1/IL. This nano catalyst was specified by TGA, XRD, TEM, SEM, FT‐IR, and ICP. For reduction of 2‐nitroaniline and 4‐nitrophenol used from the KCC‐1/IL/Pd NPs as a green catalyst that showed excellent catalytic activities. Compared with the traditional substrate, KCC‐1 substantially increases protection and the accessibility of the nanoparticle sites due to its three dimensional hierarchical structure.     

Preparation of polymeric modifier-attached graphene-supported bimetallic Pt–Pd nanocomposites,and their electrochemical properties as electro-catalysts

Graphene-supported bimetallic nanocomposites were synthesized by a modified sodium borohydride reduction method. Poly(diallyldimethylammonium chloride) (PDDA) was used as modifier for good dispersion and higher metal alloy content. The micro-structure and dispersive properties of the electro-catalysts were determined by X-ray diffraction, Fourier-transform-infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. The electrochemical properties of the Pt–Pd electro-catalysts were studied by cyclic voltammetry. This analysis confirmed that functional groups on the graphene oxide (GO) sheet were chemically bonded to the PDDA layer. The average particle diameter of Pt–Pd_{1 to 0.5}–PDDA–reduced graphene oxide (RGO) was found to be 2.4 ± 0.4 nm which is the smallest platinum metal particle size among Pt–Pd–PDDA–RGO electro-catalysts. The electrochemically active surface area was studied and the activity was found to be enhanced by use of the polymeric modifier.     

Pd embedded N,S co‐doped graphene wrapped core‐shell magnetic nanospheres: Engineered stable nanocatalyst for Suzuki couplings

Designed nitrogen and sulfur co‐doped graphene wrapped magnetic core‐shell supported Pd nanoparticles were synthesized through the following steps. Firstly, Fe₃O₄ was prepared, coated with silica and then functionalized with amine groups to create a positive charge on the structure for enhancing the interaction of the Fe₃O₄@SiO₂ with graphene oxide. Secondary, the pre‐catalyst wrapped with graphene to enhance adsorption of aromatic substrates through π–π stacking. Thirdly, graphene was doped with nitrogen and sulfur to increase the grafting of Pd in hybrid. Finally, Pd NPs were attached on the surface of pre‐engineered structure to produce Fe₃O₄@SiO₂@N,S‐wG@Pd which exhibited high performance in Suzuki reactions. This superior activity can be indexed to the incorporation of N and S atoms into graphene led to high anchoring and well‐dispersion of Pd NPs on the nanocomposite surface offering large amounts of active centers, that strongly increased the interaction between Pd and substrates to decreases Pd leaching.     

Pt‐Pd Bimetallic Nanoparticles Decorated Nanoporous Graphene as a Catalytic Amplification Platform for Electrochemical Detection of Xanthine

The nanoporous graphene papers (NGPs) was prepared by the hard‐template method. The Pt−Pd modified NGPs hybrid was prepared by the self‐assembly method. Then a glassy carbon electrode (GCE) modified with Pt−Pd bimetallic nanoparticles‐functionalized nanoporous graphene composite has been prepared for the electrochemical determination of Xanthine (XA). The Pt−Pd/NGPs hybrid was characterized by transmission electron microscopy, scanning electron microscope and X‐ray diffraction. The electrochemical behavior of XA on Pt−Pd/NGPs/GCE was investigated by cyclic voltammetry and amperometric i‐t. The Pt−Pd/NGPs modified electrode exhibited remarkably electrocatalytic activity towards the oxidation reaction of XA in phosphate buffer solution (pH=5.5). Under the optimal conditions, the determination of XA was accomplished by using amperometric i‐t, the linear response range from 1.0×10⁻⁵∼1.2×10⁻⁴ M. The detection limit was 3.0×10⁻⁶ M (S/N=3). The proposed modified electrode showed good sensitivity, selectivity, and stability with applied to determine XA in human urine.     

A Highly Active Ylide‐Functionalized Phosphine for Palladium‐Catalyzed Aminations of Aryl Chlorides

Ylide‐functionalized phosphine ligands (YPhos) were rationally designed to fit the requirements of Buchwald–Hartwig aminations at room temperature. This ligand class combines a strong electron‐donating ability comparable to NHC ligands with high steric demand similar to biaryl phosphines. The active Pd species are stabilized by agostic C?H???Pd rather than by Pd–arene interactions. The practical advantage of YPhos ligands arises from their easy and scalable synthesis from widely available, inexpensive starting materials. Benchmark studies showed that YPhos‐Pd complexes are superior to the best‐known phosphine ligands in room‐temperature aminations of aryl chlorides. The utility of the catalysts was demonstrated by the synthesis of various arylamines in high yields within short reaction times.     

Screening and separation of α‐amylase inhibitors from Solanum nigrum with amylase‐functionalized magnetic graphene oxide combined with high‐speed counter‐current chromatography

A screening method using α‐amylase‐functionalized magnetic graphene oxide combined with high‐speed counter‐current chromatography was proposed and utilized to screen and separate α‐amylase inhibitors from extract of Solanum nigrum . The α‐amylase‐functionalized magnetic graphene oxide was characterized and found to demonstrate satisfactory structure, magnetic response (24.5 emu/g), and reusability (retained 90% of initial activity after five cycles). The conditions for the screening with α‐amylase functionalized magnetic graphene oxide were optimized and set at pH 7.0 and 25°C. As a result, two potent flavonoid compounds, apigenin‐7‐O‐glucuronide ( 1 ) and astragalin ( 2 ), were separated and collected through high‐speed counter‐current chromatography and subjected to high‐performance liquid chromatography analysis with purity higher than 90% (according to HPLC data), which were identified as α‐amylase inhibitors. These results suggested that utilization of α‐amylase functionalized magnetic graphene oxide in the rapid screening and isolation bioactive compounds from complex natural products is a feasible and environmentally friendly method.     

Facilitating a high‐performance photocatalyst for Suzuki reaction: Palladium nanoparticles immobilized on reduced graphene oxide‐doped graphitic carbon nitride

We prepared a non‐covalently coupled hybrid of reduced graphene oxide (rGO)‐doped graphitic carbon nitride (g‐C₃N₄) by freezing‐assisted assembly and calcination. Fourier transform infrared, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy confirmed that rGO was incorporated into the bulk g‐C₃N₄, which was an ideal support for loading Pd nanoparticles. The Pd nanoparticles with an average size of 4.57 nm were uniformly dispersed on the rGO‐doped g‐C₃N₄ surface. The layered structure provided large contact area of g‐C₃N₄ with rGO, further accelerating the electron transfer rate and inhibiting electron–hole recombination. Consequently, compared with Pd/rGO/g‐C₃N₄ and Pd/g‐C₃N₄, the Pd/rGO‐doped g‐C₃N₄ showed a prominent catalytic activity for visible‐light‐driven photocatalytic Suzuki–Miyaura coupling at ambient temperature. The Pd/rGO‐doped g‐C₃N₄ exhibited very high stability after six consecutive cycles with minimal loss of catalytic activity.     

One‐Step Synthesis of β‐Cyclodextrin Functionalized Graphene/Ag Nanocomposite and Its Application in Sensitive Determination of 4‐Nitrophenol

β‐Cyclodextrin functionalized graphene/Ag nanocomposite (β‐CD/GN/Ag) was prepared via a one‐step microwave treatment of a mixture of graphene oxide and AgNO₃. β‐CD/GN/Ag was employed as an enhanced element for the sensitive determination of 4‐nitrophenol. A wide linear response to 4‐nitrophenol in the concentration ranges of 1.0×10^?8–1.0×10^?7 mol/L, and 1.0×10^?7–1.5×10^?3 mol/L was achieved, with a low detection limit of 8.9×10^?10 mol/L (S/N=3). The mechanism and the heterogeneous electron transfer kinetics of the 4‐nitrophenol reduction were discussed according to the rotating disk electrode experiments. Furthermore, the sensing platform has been applied to the determination of 4‐nitrophenol in real samples.     

Pd(OAc)2@SBA‐15/PrEn nanoreactor: a highly active,reusable and selective phosphine‐free catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous media

A series of ordered mesoporous organic–inorganic hybrid material was designed by using the amine‐functionalized SBA‐15 (PdX₂@SBA‐15/N_Y, Y = 1, 2) as solid support for palladium complexes. Among them, the Pd(OAc)₂/ethylenediamine complex encapsulated into SBA‐15 (Pd(OAc)₂@SBA‐15/PrEn or Pd(OAc)₂@SBA‐15/PrNHEtNH₂) exhibits higher activity and selectivity toward Suzuki cross‐coupling reaction under aerobic conditions and water solvent mixture. The SBA‐15/PrEn supported palladium pre‐catalyst could be separated easily from reaction products and used repetitively several times, showing its superiority over homogeneous catalysts for industrial and chemical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of iron‐ and nitrogen‐functionalized graphene catalysts for oxygen reduction reaction

Iron‐ and nitrogen‐functionalized graphene (Fe‐N‐G), as well as iron‐ and nitrogen‐functionalized oxidized graphene (Fe‐N‐Gox) catalysts were synthesized as non‐noble metal electrocatalysts for oxygen reduction reaction (ORR). The physical properties of the resultant catalysts were characterized using nitrogen adsorption measurements, X‐ray diffraction, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy. Subsequently, ORR activities of the catalysts were determined electrochemically using a conventional three‐electrode cell via cyclic voltammetry with a rotating disc electrode, the results of which indicated that the synthesized catalysts had a marked electrocatalytic activity towards ORR in acid media. Among the synthesized catalysts, that functionalized using 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine as nitrogen source had the highest electrocatalytic activity with the highest onset potential (0.98 V/SHE) and limiting current density (5.12 mA cm⁻²). The findings are particularly important to determine a non‐precious metal catalyst for ORR activity in fuel cells.