A valence bond model for aqueous Cu(II) and Zn(II) ions in the AMOEBA polarizable force field

A general molecular mechanics (MM) model for treating aqueous Cu²⁺ and Zn²⁺ ions was developed based on valence bond (VB) theory and incorporated into the atomic multipole optimized energetics for biomolecular applications (AMOEBA) polarizable force field. Parameters were obtained by fitting MM energies to that computed by ab initio methods for gas‐phase tetra‐ and hexa‐aqua metal complexes. Molecular dynamics (MD) simulations using the proposed AMOEBA‐VB model were performed for each transition metal ion in aqueous solution, and solvent coordination was evaluated. Results show that the AMOEBA‐VB model generates the correct square‐planar geometry for gas‐phase tetra‐aqua Cu²⁺ complex and improves the accuracy of MM model energetics for a number of ligation geometries when compared to quantum mechanical (QM) computations. On the other hand, both AMOEBA and AMOEBA‐VB generate results for Zn²⁺–water complexes in good agreement with QM calculations. Analyses of the MD trajectories revealed a six‐coordination first solvation shell for both Cu²⁺ and Zn²⁺ ions in aqueous solution, with ligation geometries falling in the range reported by previous studies. © 2012 Wiley Periodicals, Inc.     

Effective crystal field for trivalent first transition row ions

In the present work the semiempirical effective crystal field (ECF) method previously designed for electronic structure calculations of transition metal complexes and utilizing non‐Hartree–Fock trial wave function and parameterized for complexes of doubly charged Cr²⁺, V²⁺, Mn²⁺, Fe²⁺, Co²⁺, and Ni²⁺ cations is extended to complexes of triply charged cations of 3d‐elements. With the parameters adjusted the ECF method is applied to calculations of ground states and low‐energy spectra of the d‐shells of fluoro‐, chloro‐, aqua‐, amino‐, and cyano‐complexes of the triply charged cations. Obtained total spin and symmetry of the ground states match the experimentally observed ones. Satisfactory agreement between the calculated and experimental d‐shell electronic transition energies is achieved as well. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Calculation of wave‐functions with frozen orbitals in mixed quantum mechanics/molecular mechanics methods. II. Application of the local basis equation

The application of the local basis equation (Ferenczy and Adams, J. Chem. Phys. 2009 , 130, 134108) in mixed quantum mechanics/molecular mechanics (QM/MM) and quantum mechanics/quantum mechanics (QM/QM) methods is investigated. This equation is suitable to derive local basis nonorthogonal orbitals that minimize the energy of the system and it exhibits good convergence properties in a self‐consistent field solution. These features make the equation appropriate to be used in mixed QM/MM and QM/QM methods to optimize orbitals in the field of frozen localized orbitals connecting the subsystems. Calculations performed for several properties in divers systems show that the method is robust with various choices of the frozen orbitals and frontier atom properties. With appropriate basis set assignment, it gives results equivalent with those of a related approach [G. G. Ferenczy previous paper in this issue] using the Huzinaga equation. Thus, the local basis equation can be used in mixed QM/MM methods with small size quantum subsystems to calculate properties in good agreement with reference Hartree–Fock–Roothaan results. It is shown that bond charges are not necessary when the local basis equation is applied, although they are required for the self‐consistent field solution of the Huzinaga equation based method. Conversely, the deformation of the wave‐function near to the boundary is observed without bond charges and this has a significant effect on deprotonation energies but a less pronounced effect when the total charge of the system is conserved. The local basis equation can also be used to define a two layer quantum system with nonorthogonal localized orbitals surrounding the central delocalized quantum subsystem. © 2013 Wiley Periodicals, Inc.     

Low- and high-spin iron (II) complexes studied by effective crystal field method combined with molecular mechanics

A computational method targeted to Werner-type complexes is developed on the basis of quantum mechanical effective Hamiltonian crystal field (EHCF) methodology (previously proposed for describing electronic structure of transition metal complexes) combined with the Gillespie-Kepert version of molecular mechanics (MM). It is a special version of the hybrid quantum/MM approach. The MM part is responsible for representing the whole molecule, including ligand atoms and metal ion coordination sphere, but leaving out the effects of the d-shell. The quantum mechanical EHCF part is limited to the metal ion d-shell. The method reproduces with reasonable accuracy geometry and spin states of the Fe(II) complexes with monodentate and polydentate aromatic ligands with nitrogen donor atoms. In this setting a single set of MM parameters set is shown to be sufficient for handling all spin states of the complexes under consideration.     

Finite‐field method with unbiased polarizable continuum model for evaluation of the second hyperpolarizability of an open‐shell singlet molecule in solvents

The static second hyperpolarizability γ of the complexes composed of open‐shell singlet 1,3‐dipole molecule involving a boron atom and a water molecule in aqueous phase are investigated by the finite‐field (FF) method combined with a standard polarized continuum model (PCM) and with a newly proposed unbiased PCM (UBPCM). On the basis of the comparison with the results calculated by the FF method using the full quantum and the quantum‐mechanical/molecular‐mechanical and molecular‐dynamics (QM/MM‐MD) treatments, the present FF‐UBPCM method is demonstrated to remedy the artificial overestimation of the γ caused by standard FF‐PCM calculations and to well reproduce the FF‐QM/MM‐MD and FF‐full‐QM results with much lower costs. © 2013 Wiley Periodicals, Inc.     

Influence of electronic effect on catalytic activity of salicylaldiminato nickel(II) complexes

A means of correlation between the activity and the net charge, the metal atom net charge correlation (MANCC), which was successful in the activity prediction of the early‐transition metal catalysts, has been used to study the catalytic activities of salicylaldiminato Ni(II) complexes, the late‐transition metal catalysts, in olefin polymerization or oligomerization. A comparison with the available quantum mechanics/molecular mechanics (QM/MM) calculation data suggests that even without a detailed mechanism, MANCC results mostly agree with QM/MM calculation data regarding insertion barrier data and enthalpy change. Eight experimental complexes were further built up by modeling; their catalytic activities predominantly increased in line with the net charges on the metal atoms. The same results were obtained for the other four complexes synthesized in the present work. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4765–4774, 2004     

Analytical hessian fitting schemes for efficient determination of force‐constant parameters in molecular mechanics

Building upon our recently developed partial Hessian fitting (PHF) method (Wang et al., J. Comput. Chem. 2016 , 37, 2349), we formulated and implemented two other rapid force‐field parameterization schemes called full Hessian fitting (FHF) and internal Hessian fitting (IHF), and comparisons were made among these three parameterization schemes to assess their performance. FHF minimizes deviation between the Hessian matrices in Cartesian coordinates computed by quantum mechanics (QM) and molecular mechanics (MM), to determine the best possible MM force‐constant parameters. While PHF requires step‐by‐step fittings of 3 × 3 partial Hessian matrices, FHF compares the lower triangular part of the QM and MM Hessian matrices, which allows simultaneous determination of all force‐constant parameters. In addition to this simple FHF scheme, IHF was developed such that it considers the Hessian matrices in redundant internal coordinates, where all possible internal coordinates that arise from the user‐defined interatomic connectivity are utilized. The results show that IHF performs best overall, followed by PHF and then FHF. Python‐based programing codes were developed to automate various tedious steps involved in the parameterization processes. © 2017 Wiley Periodicals, Inc.     

The MM2QM tool for combining docking,molecular dynamics,molecular mechanics,and quantum mechanics†

The use of the MM2QM tool in a combined docking + molecular dynamics (MD) + molecular mechanics (MM) + quantum mechanical (QM) binding affinity prediction study is presented, and the tool itself is discussed. The system of interest is Mycobacterium tuberculosis (MTB) pantothenate synthetase in complexes with three highly similar sulfonamide inhibitors, for which crystal structures are available. Starting from the structure of MTB pantothenate synthetase in the “open” conformation and following the combined docking + MD + MM + QM procedure, we were able to capture the closing of the enzyme binding pocket and to reproduce the position of the ligands with an average root mean square deviation of 1.6 Å. Protein–ligand interaction energies were reproduced with an average error lower than 10%. The discussion on the MD part and a protein flexibility importance is carried out. The presented approach may be useful especially for finding analog inhibitors or improving drug candidates. © 2012 Wiley Periodicals, Inc.     

Convergence in the QM‐only and QM/MM modeling of enzymatic reactions: A case study for acetylene hydratase

We report systematic quantum mechanics‐only (QM‐only) and QM/molecular mechanics (MM) calculations on an enzyme‐catalyzed reaction to assess the convergence behavior of QM‐only and QM/MM energies with respect to the size of the chosen QM region. The QM and MM parts are described by density functional theory (typically B3LYP/def2‐SVP) and the CHARMM force field, respectively. Extending our previous work on acetylene hydratase with QM regions up to 157 atoms (Liao and Thiel, J. Chem. Theory Comput. 2012, 8, 3793), we performed QM/MM geometry optimizations with a QM region M4 composed of 408 atoms, as well as further QM/MM single‐point calculations with even larger QM regions up to 657 atoms. A charge deletion analysis was conducted for the previously used QM/MM model ( M3a , with a QM region of 157 atoms) to identify all MM residues with strong electrostatic contributions to the reaction energetics (typically more than 2 kcal/mol), which were then included in M4 . QM/MM calculations with this large QM region M4 lead to the same overall mechanism as the previous QM/MM calculations with M3a , but there are some variations in the relative energies of the stationary points, with a mean absolute deviation (MAD) of 2.7 kcal/mol. The energies of the two relevant transition states are close to each other at all levels applied (typically within 2 kcal/mol), with the first (second) one being rate‐limiting in the QM/MM calculations with M3a ( M4 ). QM‐only gas‐phase calculations give a very similar energy profile for QM region M4 (MAD of 1.7 kcal/mol), contrary to the situation for M3a where we had previously found significant discrepancies between the QM‐only and QM/MM results (MAD of 7.9 kcal/mol). Extension of the QM region beyond M4 up to M7 (657 atoms) leads to only rather small variations in the relative energies from single‐point QM‐only and QM/MM calculations (MAD typically about 1–2 kcal/mol). In the case of acetylene hydratase, a model with 408 QM atoms thus seems sufficient to achieve convergence in the computed relative energies to within 1–2 kcal/mol.Copyright © 2013 Wiley Periodicals, Inc.     

Implementation of the IMOMM methodology for performing combined QM/MM molecular dynamics simulations and frequency calculations

A technique for implementing the integrated molecular orbital and molecular mechanics (IMOMM) methodology developed by Maseras and Morokuma that is used to perform combined quantum mechanics/molecular mechanics (QM/MM) molecular dynamics simulations, frequency calculations and simulations of macromolecules including explicit solvent is presented. Although the IMOMM methodology is generalized to any coordinate system, the implementation first described by Maseras and Morokuma requires that the QM and MM gradients be transformed into internal coordinates before they are added together. This coordinate transformation can be cumbersome for macromolecular systems and can become ill-defined during the course of a molecular dynamics simulation. We describe an implementation of the IMOMM method in which the QM and MM gradients are combined in the cartesian coordinate system, thereby avoiding potential problems associated with using the internal coordinate system. The implementation can be used to perform combined QM/MM molecular dynamics simulations and frequency calculations within the IMOMM framework. Finally, we have examined the applicability of thermochemical data derived from IMOMM framework. Finally, we have examined the applicability of thermochemical data derived from IMOMM frequency calculations. Received: 11 May 1998 / Accepted: 14 August 1998 / Published online: 16 November 1998     

Mixed ab initio QM/MM modeling using frozen orbitals and tests with alanine dipeptide and tetrapeptide

Methodology is discussed for mixed ab initio quantum mechanics/molecular mechanics modeling of systems where the quantum mechanics (QM) and molecular mechanics (MM) regions are within the same molecule. The ab initio QM calculations are at the restricted Hartree–Fock level using the pseudospectral method of the Jaguar program while the MM part is treated with the OPLS force fields implemented in the IMPACT program. The interface between the QM and MM regions, in particular, is elaborated upon, as it is dealt with by “breaking” bonds at the boundaries and using Boys-localized orbitals found from model molecules in place of the bonds. These orbitals are kept frozen during QM calculations. Results from tests of the method to find relative conformational energies and geometries of alanine dipeptides and alanine tetrapeptides are presented along with comparisons to pure QM and pure MM calculations. ©1999 John Wiley & Sons, Inc. J Comput Chem 20: 1468–1494, 1999     

A QM/MM study of the binding of RAPTA ligands to cathepsin B

We have carried out quantum mechanical (QM) and QM/MM (combined QM and molecular mechanics) calculations, as well as molecular dynamics (MD) simulations to study the binding of a series of six RAPTA (Ru(II)-arene-1,3,5-triaza-7-phosphatricyclo-[3.3.1.1] decane) complexes with different arene substituents to cathepsin B. The recently developed QM/MM-PBSA approach (QM/MM combined with Poisson–Boltzmann solvent-accessible surface area solvation) has been used to estimate binding affinities. The QM calculations reproduce the antitumour activities of the complexes with a correlation coefficient (r ²) of 0.35–0.86 after a conformational search. The QM/MM-PBSA method gave a better correlation (r ² = 0.59) when the protein was fixed to the crystal structure, but more reasonable ligand structures and absolute binding energies were obtained if the protein was allowed to relax, indicating that the ligands are strained when the protein is kept fixed. In addition, the best correlation (r ² = 0.80) was obtained when only the QM energies were used, which suggests that the MM and continuum solvation energies are not accurate enough to predict the binding of a charged metal complex to a charged protein. Taking into account the protein flexibility by means of MD simulations slightly improves the correlation (r ² = 0.91), but the absolute energies are still too large and the results are sensitive to the details in the calculations, illustrating that it is hard to obtain stable predictions when full flexible protein is included in the calculations.     

The adaptive buffered force QM/MM method in the CP2K and AMBER software packages

The implementation and validation of the adaptive buffered force (AdBF) quantum‐mechanics/molecular‐mechanics (QM/MM) method in two popular packages, CP2K and AMBER are presented. The implementations build on the existing QM/MM functionality in each code, extending it to allow for redefinition of the QM and MM regions during the simulation and reducing QM‐MM interface errors by discarding forces near the boundary according to the buffered force‐mixing approach. New adaptive thermostats, needed by force‐mixing methods, are also implemented. Different variants of the method are benchmarked by simulating the structure of bulk water, water autoprotolysis in the presence of zinc and dimethyl‐phosphate hydrolysis using various semiempirical Hamiltonians and density functional theory as the QM model. It is shown that with suitable parameters, based on force convergence tests, the AdBF QM/MM scheme can provide an accurate approximation of the structure in the dynamical QM region matching the corresponding fully QM simulations, as well as reproducing the correct energetics in all cases. Adaptive unbuffered force‐mixing and adaptive conventional QM/MM methods also provide reasonable results for some systems, but are more likely to suffer from instabilities and inaccuracies. © 2015 The Authors. Journal of Computational Chemistry Published by Wiley Periodicals, Inc.     

Extension of QM/MM docking and its applications to metalloproteins

To overcome the limitation of conventional docking methods which assume fixed charge model from force field parameters, combined quantum mechanics/molecular mechanics (QM/MM) method has been applied to docking as a variable charge model and shown to exhibit improvement on the docking accuracy over fixed charge based methods. However, it has also been shown that there are a number of examples for which adoption of variable‐charge model fails to reproduce the native binding modes. In particular, for metalloproteins, previously implemented method of QM/MM docking failed most often. This class of proteins has highly polarized binding sites at which high‐coordinate‐numbered metal ions reside. We extend the QM/MM docking method so that protein atoms surrounding the binding site along with metal ions are included as quantum region, as opposed to only ligand atoms. This extension facilitates the required scaling of partial charges on metal ions leading to prediction of correct binding modes in metalloproteins. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2009     

Reaction mechanism of Ru(II) piano‐stool complexes: Umbrella sampling QM/MM MD study

Biologically relevant interactions of piano‐stool ruthenium(II) complexes with ds‐DNA are studied in this article by hybrid quantum mechanics—molecular mechanics (QM/MM) computational technique. The whole reaction mechanism is divided into three phases: (i) hydration of the [Ru^II(η⁶‐benzene)(en)Cl]⁺ complex, (ii) monoadduct formation between the resulting aqua‐Ru(II) complex and N7 position of one of the guanines in the ds‐DNA oligomer, and (iii) formation of the intrastrand Ru(II) bridge (cross‐link) between two adjacent guanines. Free energy profiles of all the reactions are explored by QM/MM MD umbrella sampling approach where the Ru(II) complex and two guanines represent a quantum core, which is described by density functional theory methods. The combined QM/MM scheme is realized by our own software, which was developed to couple several quantum chemical programs (in this study Gaussian 09) and Amber 11 package. Calculated free energy barriers of the both ruthenium hydration and Ru(II)‐N7(G) DNA binding process are in good agreement with experimentally measured rate constants. Then, this method was used to study the possibility of cross‐link formation. One feasible pathway leading to Ru(II) guanine‐guanine cross‐link with synchronous releasing of the benzene ligand is predicted. The cross‐linking is an exergonic process with the energy barrier lower than for the monoadduct reaction of Ru(II) complex with ds‐DNA. © 2014 Wiley Periodicals, Inc.     

CPMD/GULP QM/MM interface for modeling periodic solids: Implementation and its application in the study of Y‐zeolite supported Rhn clusters

We report here the development of hybrid quantum mechanics/molecular mechanics (QM/MM) interface between the plane‐wave density functional theory based CPMD code and the empirical force‐field based GULP code for modeling periodic solids and surfaces. The hybrid QM/MM interface is based on the electrostatic coupling between QM and MM regions. The interface is designed for carrying out full relaxation of all the QM and MM atoms during geometry optimizations and molecular dynamics simulations, including the boundary atoms. Both Born–Oppenheimer and Car–Parrinello molecular dynamics schemes are enabled for the QM part during the QM/MM calculations. This interface has the advantage of parallelization of both the programs such that the QM and MM force evaluations can be carried out in parallel to model large systems. The interface program is first validated for total energy conservation and parallel scaling performance is benchmarked. Oxygen vacancy in α‐cristobalite is then studied in detail and the results are compared with a fully QM calculation and experimental data. Subsequently, we use our implementation to investigate the structure of rhodium cluster (Rh_n; n = 2 to 6) formed from Rh(C₂H₄)₂ complex adsorbed within a cavity of Y‐zeolite in a reducible atmosphere of H₂ gas. © 2016 Wiley Periodicals, Inc.     

Solvents effects on the mechanism of cellulose hydrolysis: A QM/MM study

This article reports a combined quantum mechanics/molecular mechanics (QM/MM) investigation on the acid hydrolysis of cellulose in water using two different models, cellobiose and a 40‐unit cellulose chain. The explicitly treated solvent molecules strongly influence the conformations, intramolecular hydrogen bonds, and exoanomeric effects in these models. As these features are largely responsible for the barrier to cellulose hydrolysis, the present QM/MM results for the pathways and reaction intermediates in water are expected to be more realistic than those from a former density functional theory (DFT) study with implicit solvent (CPCM). However, in a qualitative sense, there is reasonable agreement between the DFT/CPCM and QM/MM predictions for the reaction mechanism. Differences arise mainly from specific solute–solvent hydrogen bonds that are only captured by QM/MM and not by DFT/CPCM. © 2015 Wiley Periodicals, Inc.     

Computing pKA values of hexa‐aqua transition metal complexes

Aqueous pK_A values for 15 hexa‐aqua transition metal complexes were computed using a combination of quantum chemical and electrostatic methods. Two different structure models were considered optimizing the isolated complexes in vacuum or in presence of explicit solvent using a QM/MM approach. They yield very good agreement with experimentally measured pK_A values with an overall root mean square deviation of about 1 pH unit, excluding a single but different outlier for each of the two structure models. These outliers are hexa‐aqua Cr(III) for the vacuum and hexa‐aqua Mn(III) for the QM/MM structure model. Reasons leading to the deviations of the outlier complexes are partially explained. Compared to previous approaches from the same lab the precision of the method was systematically improved as discussed in this study. The refined methods to obtain the appropriate geometries of the complexes, developed in this work, may allow also the computation of accurate pK_A values for multicore transition metal complexes in different oxidation states. © 2014 Wiley Periodicals, Inc.