Syntheses and fluoride‐ion‐mediated hydrolysis of phosphoroselenoic acid ester and amides

Phosphoroselenoic acid ester and amides containing binaphthoxy moiety were prepared by reacting phosphoroselenoyl chloride with alcohols and secondary amines. The resulting amides underwent fluoride‐ion‐mediated hydrolysis with a THF solution of tetrabutylammonium fluoride to give two types of phosphoroselenoic acid ammonium salts: one with a fluorine atom and another with a binaphthoxy group on the phosphorus atom. The ratio of these products depended on the substituents on the nitrogen atom of the amides. A similar reaction of the ester with tetrabutylammonium fluoride gave two types of ammonium salts. The formation of these products was confirmed by converting them to the corresponding methyl esters. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:255–261, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20544     

Kinetic resolution of secondary alcohols by the combination of a chiral Brønsted acid, DABCO, and acetyl chloride

An efficient and simple protocol for the kinetic resolution of secondary alcohols is presented. The new system is based on a combination of chiral Br?nsted acid, DABCO, and acetyl chloride and gives various enantioenriched alcohols with selectivity factors up to 105.     

A Novel One‐Pot Conversion of Allyl Alcohols into Primary Allyl Halides Mediated by Acetyl Halide

A new and simple method for the synthesis of the primary allyl chlorides and bromides 9 – 16 from the secondary or tertiary allyl alcohols 3 – 8 and acyl halide was developed (Scheme 2, Table 1). Non‐commercially available secondary and tertiary allyl alcohols were synthesized from the related ketones and aldehydes via the addition of vinylmagnesium chloride. Mechanistic studies indicate that the alcohols were first acetylated by the acetyl halide and then protonated prior to substitution by the halide, Cl^? or Br^?, via an S_N2′ reaction, to yield the primary halides (Scheme 5).     

Chemoselective and scalable preparation of alkyl tosylates under solvent-free conditions

The improved method for the efficient tosylation of alcohols has been reported using two procedures (A and B). Procedure A: methanol, ethanol, benzyl alcohols, and valuable ethylene glycols can be converted into their corresponding alkyl tosylates in very fast, simple, and efficient grinding method using potassium carbonate as solid base. Other primary and secondary alcohols need to add potassium hydroxide to reaction mixture (procedure B). High selectivity of tosylation was observed for these two procedures. Scale up ability was found in this method even in 100 mmol of substrate. The present method is the example of solid-state tosylation using tosyl chloride, and is a green chemical process due to solvent-free conditions.     

苄基三苯基高碘酸季（鏻）盐的合成其及氧化性能研究

用苄基三苯基氯化Ｌｉｎｇ与高碘酸根反应制备稳定的苄基三苄基高碘酸盐氧化剂,在非质子溶剂中和Ｌｅｗｉｓ酸催化下,有效地氧化伯醇为醛、仲醇为酮、苯硫酚为二苯二硫化合物,产率５６％－９５％,探讨了不同的反应溶剂及Ｌｅｗｉｓ酸对该反应的影响。     

Development of a Metal-Free Oxidation of Alcohols with Dimethyl Sulfoxide (DMSO) Activated by Tosyl Chloride

In this article we propose an efficient metal-free method for the mild oxidation of alcohols using dimethyl sulfoxide/tosyl chloride at ambient temperature. The procedure described here is an easy and practical method for the oxidation of primary, secondary, allylic, and benzylic alcohols into their corresponding aldehydes and ketones. The notable advantages of this protocol are mild reaction conditions, good yields and selectivity, and simple workup with minimal waste containing no metallic components. The mechanism of the transformation is also investigated.     

Treatment of alcohols with tosyl chloride does not always lead to the formation of tosylates

Treatment of substituted benzyl alcohols with tosyl chloride resulted in the formation of the corresponding chlorides, not the usual tosylates. A series of experiments demonstrated that it was possible to predict whether chlorination or tosylation would occur for substituted benzyl alcohols and pyridine methanols. Treatment of electron withdrawing group-substituted benzyl alcohols with tosyl chloride gave the corresponding chlorides in moderate yields under mild conditions, which provided a simple way to directly prepare chlorides from alcohols.     

Photocatalytic C−C Bond Cleavage and Amination of Cycloalkanols by Cerium(III) Chloride Complex

A general strategy for the cleavage and amination of C?C bonds of cycloalkanols has been achieved through visible‐light‐induced photoredox catalysis utilizing a cerium(III) chloride complex. This operationally simple methodology has been successfully applied to a wide array of unstrained cyclic alcohols, and represents the first example of catalytic C?C bond cleavage and functionalization of unstrained secondary cycloalkanols.     

tert-Butylnitrite as a convenient and easy-removable oxidant for the conversion of benzylic alcohols to ketones and aldehydes

The oxidation of primary and secondary benzylic alcohols was achieved by using tert-butyl nitrite (t-BuONO) as a stoichiometric oxidant. Various substrates were effectively converted into the corresponding ketones or aldehydes in good to excellent yields. The reaction presumably proceeded by a nitrosyl exchange and a subsequent thermal decomposition of benzylic nitrites. This process would realize an oxidation of alcohols with oxygen in theory by combining with a reproduction of alkyl nitrites from NO and alcohols under an O₂ atmosphere. In addition, almost pure oxidized products were readily obtained by simple evaporation of the reaction mixtures since t-BuONO produced only volatile side products.     

Resolution of secondary arylalkyl alcohols using pentafluorophenyl 2-phenylbutanoate and zinc chloride

The resolution of racemic secondary arylalkyl alcohols using pentafluorophenyl 2-phenylbutanoate and zinc chloride is discussed. The levels of enantiomeric recognition were high leading to enantiomerically enriched alcohols in good yield.     

Combined ruthenium(II) and lipase catalysis for efficient dynamic kinetic resolution of secondary alcohols. Insight into the racemization mechanism

Pentaphenylcyclopentadienyl ruthenium complexes (3) are excellent catalysts for the racemization of secondary alcohols at ambient temperature. The combination of this process with enzymatic resolution of the alcohols results in a highly efficient synthesis of enantiomerically pure acetates at room temperature with short reaction times for most substrates. This new reaction was applied to a wide range of functionalized alcohols including heteroaromatic alcohols, and for many of the latter, enantiopure acetates were efficiently prepared for the first time via dynamic kinetic resolution (DKR). Different substituted cyclopentadienyl ruthenium complexes were prepared and studied as catalysts for racemization of alcohols. Pentaaryl-substituted cyclopentadienyl complexes were found to be highly efficient catalysts for the racemization. Substitution of one of the aryl groups by an alkyl group considerably slows down the racemization process. A study of the racemization of (S)-1-phenylethanol catalyzed by ruthenium hydride eta(5)-Ph(5)CpRu(CO)(2)H (8) indicates that the racemization takes place within the coordination sphere of the ruthenium catalyst. This conclusion was supported by the lack of ketone exchange in the racemization of (S)-1-phenylethanol performed in the presence of p-tolyl methyl ketone (1 equiv), which gave <1% of 1-(p-tolyl)ethanol. The structures of ruthenium chloride and iodide complexes 3a and 3c and of ruthenium hydride complex 8 were confirmed by X-ray analysis.     

Benzylation of alcohols by using bis[acetylacetonato]copper as catalyst

Selective O-benzylation of primary hydroxy compounds has been achieved in the presence of bis[acetylacetonato]copper with benzyl chloride. We showed that bis[acetylacetonato]copper was very efficient in promoting the benzylation of primary aliphatic alcohols versus secondary aliphatic alcohols and phenolic hydroxy groups selectively.     

Enantioselective and diastereoselective syntheses of cyanohydrin carbonates

A new and general synthesis of alkyl cyanoformates is presented starting from the appropriate alcohol and oxalyl chloride. This is used to prepare enantiomerically pure cyanoformates from enantiomerically pure primary and secondary alcohols. Optimal conditions for the addition of various achiral cyanoformates to aldehydes catalysed by an enantiomerically pure titanium(salen) catalyst in the presence of potassium cyanide as a cocatalyst are developed. Under these conditions, two chiral cyanoformates also reacted with aldehydes to give cyanohydrin carbonates. The stereochemistry of this process is predominantly determined by the stereochemistry of the titanium(salen) catalyst and the stereochemistry of two of the cyanohydrin carbonates was confirmed by X-ray crystallography. In a further extension of the chemistry, a homogeneous system in which the potassium cyanide/18-crown-6 complex is used as the cyanide cocatalyst has been developed and the kinetics of this reaction show that it displays first order kinetics, provided at least 2 mol % of the potassium cyanide complex are employed.     

Self-assembled nanoporphyrins in the presence of gold bio-nanoparticles as heterogeneous nano-biocatalyst for green production of aldehydes and ketones

We report a simple and facile self-assembly method for the successful fabrication of a biological macromolecule, MnTPPCl (manganese(III) chloride 5,10,15,20-tetraphenylporphyrin), intercalated into gold nanoparticles using the cooperative effects of Sesbania sesban plant. This biohybrid was characterized using various techniques for further investigation. The catalytic activity of this biological hybrid was considered in the production of aldehydes and ketones from primary and secondary alcohols, respectively. Excellent conversions and selectivties were obtained applying Au@MnTPPCl colloidal nanocomposite and NaIO₄ as an oxygen donor in ethanol.     

DMSO-catalyzed chlorination of alcohols using N-phenylbenzimidoyl chloride

N-phenylbenzimidoyl chloride has been demonstrated as an efficient chlorination reagent catalyzed by dimethyl sulfoxide (DMSO) in conversion of alcohols to corresponding chlorides. The reaction conditions were mild, and most of the substrates gave satisfactory yields. The configuration inversion of the chlorination was proved using optically active phenyl alcohols. The amount of DMSO can be as low as 0.001 eq without reducing the efficiency of the chlorination. A plausible mechanism for the reaction was proposed and proved by experiments. The reaction is stereoselective and potentially chemoselective among primary benzyl alcohols, secondary benzyl alcohols, and unactivated aliphatic alcohols.     

Triphosgene/Triphenylphosphine: A Mild Reagent for the Conversion of Alcohols to Chlorides

A mixture of triphosgene/triphenylphosphine in methylene chloride converts primary and secondary alcohols to chlorides at room temperature.     

Intramolecular formal [4+2] cycloaddition reactions of secondary and tertiary aryldiacetylene alcohols

Thermal and thionyl chloride induced cycloaromatizations of secondary and tertiary aryldiacetylene alcohols were studied. The secondary alcohol did not respond to thionyl chloride, but in all the other cases presumptive biradical intermediates evolved either by intramolecular radical coupling or, when derived from a xanthene scaffold, by intramolecular radical acylation to a diketone that finally afforded a p-methylene-quinone.     

Facile oxidative cyclization and carbonylation of allylicalcohols

Palladium chloride catalyzed reaction [room temperature, one atmosphere] of primary, secondary, and tertiary allylic alcohols with carbon monoxide and oxygen, hydrochloric acid, and cupric chloride in tetrahydrofuran affords five-membered ring lactones.     

Enantioselective construction of carbobicyclic scaffolds

Allylic and benzylic Grignard reagents smoothly open phenylalkynyl-activated cyclic trisubstituted epoxides at the more substituted carbon atom to give secondary alcohols with a chiral quaternary center. These alcohols are good substrates for the construction of enantiomerically pure carbobicyclic scaffolds through intramolecular alkylation.     

Selectivity enhancement of silica-supported sulfonic acid catalysts in water by coating of ionic liquid

Coating of silica-supported sulfonic acid catalysts with hydrophobic ionic liquid leads to a significant improvement of catalyst selectivity. Many organic reactions, including Prins cyclization, cycloaddition of epoxide to aldehyde, and dehydrative etherification of secondary benzyl alcohols, proceed well in formalin or pure water. In particular, tandem dehydration/Prins cyclization reactions of tertiary and secondary alcohols with formaldehyde were developed for the first time.