Solvent directed morphologies and enhanced luminescent properties of BaWO4:Tm3+,Dy3+ for white light emitting diodes

A series of Tm³⁺ and Dy³⁺ codoped BaWO₄ phosphors with tunable shapes were controllably synthesized by a facile solvothermal method. The effects of ratio of ethylene glycol (EG) and water on the morphologies of BaWO₄ structures are systematically studied. It was discovered that the reason for these morphological changes is based on the reaction speed of the kinetic control, which relates to the strong chelating abilities of ethylene glycol. And when the solvent is pure ethylene glycol, the peanut-like BaWO₄:Dy³⁺ has the strongest emission intensity. Moreover, the emission color of the phosphors varied from blue (0.232, 0.180) to white (0.268, 0.250) by controlling Dy³⁺ ions content with a fixed Tm³⁺ concentration. The energy transfer mechanism was investigated in detail. With increasing the doped concentration of Dy³⁺ ions, the energy transfer efficiency of BaWO₄:0.005Tm³⁺,yDy³⁺ increased gradually and reached as high as 63% when the Dy³⁺ doped concentration is 0.03. The critical distance R_C calculated by the spectral overlap method is about 19.93 Å, and it is in good agreement with that obtained using the concentration quenching method (19.70 Å), indicating that the electric dipole-dipole interaction is the main energy transfer mechanism for BaWO₄:Tm³⁺,Dy³⁺ phosphors.     

Synthesis,characterization, and photoluminescence of SrBPO5:R,Na+ (R = Eu3+, Tb3+) phosphor for solid state lighting

A series of phosphors SrBPO₅:R,Na⁺ (R = Eu³⁺, Tb³⁺) were prepared by high-temperature solid-state synthesis, and their phase purity, morphology, IR spectra, and UV-Vis photoluminescence properties were investigated. The f-f transitions of Eu³⁺ and Tb³⁺ ions in the host lattice were assigned and discussed. The excitation and emission spectra indicate that SrBPO₅:Eu³⁺,Na⁺ and SrBPO₅:Tb³⁺,Na⁺ can be effectively excited by ultraviolet (394 and 370 nm), and exhibit reddish orange emission and yellowish green emission, respectively. The influence of the doping concentration on the relative emission intensity of Eu³⁺/Tb³⁺ was investigated, and the critical distance R_c was estimated in term of the concentration quenching data. The present study suggests SrBPO₅:R,Na⁺ (R = Eu³⁺, Tb³⁺) phosphor can be a potential candidate as an UV-convertible phosphor for white light-emitting diodes (LEDs).     

颜色可调Sr3Y（BO3）3∶Tm3+，Dy3+荧光粉的发光性能及能量传递

采用高温固相法制备了Sr_3Y(BO_3)_3:xTm~(3+),yDy~(3+)荧光粉,并通过XRD、SEM和荧光光谱仪对样品的物相、微观形貌、发光性能、能量传递机制和CIE色坐标进行了分析。结果表明:Sr_3Y(BO_3)_3:xTm~(3+)荧光粉在监测波长为359 nm时发射蓝光,Tm~(3+)的浓度淬灭点为x=0.08;在Sr_3Y(BO_3)_3:0.08Tm~(3+),yDy~(3+)荧光粉中,随着Dy~(3+)掺杂浓度的增加,Tm~(3+)的发光强度降低而Dy~(3+)发光强度却先增加后降低,Dy~(3+)的浓度淬灭点为y=0.1;通过改变Dy~(3+)掺杂浓度或改变激发光的波长,均可实现发射光的颜色可调;在Tm~(3+)-Dy~(3+)离子之间存在能量传递。当Dy~(3+)掺杂浓度(物质的量分数)为0.15时能量传递效率达75.14%,能量传递机制为电偶极-电偶极相互作用。     

Photoluminescence properties of rare earths (Eu3+, Tb3+, Dy3+ and Tm3+) activated NaInW2O8 wolframite host lattice

The photoluminescence (PL) studies on NaIn_1?xRE_xW₂O₈, with RE=Eu³⁺, Tb³⁺, Dy³⁺ and Tm³⁺ phases have shown that the relative contribution of the host lattice and of the intra-f–f emission of the activators to the PL varies with the nature of the rare earth cation. In the case of Dy³⁺ and Tm³⁺ activators, with yellow and blue emission, respectively, the energy transfer from host to the activator plays a major role. In contrast for Eu³⁺, with intense red emission, the host absorption is less pronounced and the intra-f–f transitions of the Eu³⁺ ions play a major role, whereas for Tb³⁺ intra-f–f transitions are only observed, giving rise to green emission.     

Enhancing the Photocatalytic Activity of Sr4Al14O25: Eu2+, Dy3+ Persistent Phosphors by Codoping with Bi3+ Ions

The photocatalytic activity of Bismuth‐codoped Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺ persistent phosphors is studied by monitoring the degradation of the blue methylene dye UV light irradiation. Powder phosphors are obtained by a combustion synthesis method and a postannealing process in reductive atmosphere. The XRD patterns show a single orthorhombic phase Sr₄Al₁₄O₂₅: Eu²⁺, Dy³⁺, Bi³⁺ phosphors even at high Bismuth dopant concentrations of 12 mol%, suggesting that Bi ions are well incorporated into the host lattice. SEM micrographs show irregular micrograins with sizes in the range of 0.5–20 μm. The samples present an intense greenish‐blue fluorescence and persistent emissions at 495 nm, attributed to the 5d–4f allowed transitions of Eu²⁺. The fluorescence decreases as Bi concentration increases; that suggest bismuth‐induced traps formation that in turn quench the luminescence. The photocatalytic evaluation of the powders was studied under both 365 nm UV and solar irradiations. Sample with 12 mol% of Bi presented the best MB degradation activity; 310 min of solar irradiation allow 100% MB degradation, whereas only 62.49% MB degradation is achieved under UV irradiation. Our results suggest that codoping the persistent phosphors with Bi³⁺ can be an alternative to enhance their photocatalytic activity.     

Mechanistic Insight into Energy-Transfer Dynamics and Color Tunability of Na4CaSi3O9:Tb3+,Eu3+ for Warm White LEDs

In this work, a latent energy-transfer process in traditional Eu³⁺,Tb³⁺-doped phosphors is proposed and a new class of Eu³⁺,Tb³⁺-doped Na₄CaSi₃O₉ (NCSO) phosphors is presented which is enabled by luminescence decay dynamics that optimize the electron-transfer energy process. Relative to other Eu³⁺,Tb³⁺-doped phosphors, the as-synthesized Eu³⁺,Tb³⁺-doped NCSO phosphors show improved large-scale tunable emission color from green to red upon UV excitation, controlled by the Tb³⁺/Eu³⁺ doping ratio. Detailed spectroscopic measurements in the vacuum ultraviolet (VUV)/UV/Vis region were used to determine the Eu³⁺–O²⁻ charge-transfer energy, 4f–5d transition energies, and the energies of 4f excited multiplets of Eu³⁺ and Tb³⁺ with different 4f^N electronic configurations. The Tb³⁺→Eu³⁺ energy-transfer pathway in the co-doped sample was systematically investigated, by employing luminescence decay dynamics analysis to elucidate the relevant energy-transfer mechanism in combination with the appropriate model simulation. To demonstrate their application potential, a prototype white-light-emitting diode (WLED) device was successfully fabricated by using the yellow luminescence NCSO:0.03Tb³⁺, 0.05Eu³⁺ phosphor with high thermal stability and a BaMgAl₁₀O₁₇:Eu²⁺ phosphor in combination with a near-UV chip. These findings open up a new avenue to realize and develop multifunctional high-performance phosphors by manipulating the energy-transfer process for practical applications.     

Enhanced photoluminescence of Ba2GdNbO6: Eu/Dy phosphors by Li doping

The Ba₂GdNbO₆: Eu³⁺/Dy³⁺ and Li⁺-doped Ba₂GdNbO₆: Eu³⁺/Dy³⁺ phosphors were prepared by solid-state reaction process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and photoluminescence (PL) as well as lifetimes, was utilized to characterize the resulting phosphors. Under the excitation of ultraviolet light, the Ba₂GdNbO₆: Eu³⁺/Dy³⁺ and Li⁺-doped Ba₂GdNbO₆: Eu³⁺/Dy³⁺ show the characteristic emissions of Eu³⁺ (⁵D₀-⁷F_1,2,3 transitions dominated by ⁵D₀-⁷F₁ at 593 nm) and Dy³⁺ (⁴F_9/2-⁶H_15/2,_13/2 transitions dominated by ⁴F_9/2-⁶H_15/2 at 494 nm), respectively. The incorporation of Li⁺ ions into the Ba₂GdNbO₆: Eu³⁺/Dy³⁺ phosphors has enhanced the PL intensities depending on the doping concentration of Li⁺, and the highest emission was obtained in Ba₂Gd_0.9NbO₆: 0.10Eu³⁺, 0.01Li⁺ and Ba₂Gd_0.95NbO₆: 0.05Dy³⁺, 0.07Li⁺, respectively. An energy level diagram was proposed to explain the luminescence process in the phosphors.     

Luminescence properties of Dy3+ or/and Sm3+ doped LiLa(WO4)2 phosphors and energy transfer from Dy3+ to Sm3+

The Dy³⁺ or/and Sm³⁺ doped LiLa(WO₄)₂ phosphors are synthesized by a facile solid state reaction method. The phase and luminescence properties of the phosphors are investigated. The powder X-ray diffraction (XRD) results show that the phosphor has a tetragonal phase crystal structure. The quenching concentration of single doped Dy³⁺ and Sm³⁺ in the LiLa(WO₄)₂ are determined to be 6% and 3%, respectively. Under the excitation of 404 nm, warm white light is obtained in the co-doped phosphors. With the concentration of Sm³⁺ increasing, the correlated color temperature (CCT) gradually decreases from 3090 to 2453 K. Two kinds of energy transfer may exist at the same time. The overlap between the emission spectrum of Dy³⁺ and the excitation spectrum of Sm³⁺ reveals that the energy of Dy³⁺ can transfer to Sm³⁺ via radiation. Another way of energy transfer, that is non-radiative energy transfer, is attributed to the excited state of Dy³⁺ (⁴F_9/2) slightly higher than that of Sm³⁺ (⁴I_19/2). The calculation results show that non-radiative energy transfer process from Dy³⁺ to Sm³⁺ ions is predominated by quadrupole–quadrupole interaction.     

Photoluminescent properties of white-light-emitting Li6Y(BO3)3:Dy3+ phosphor

In this study, lithium yttrium borate (LYBO) phosphor was doped with various concentrations of trivalent dysprosium ions. To produce these phosphors, the raw materials were sintered. The phase conformation, crystallinity, grain size, and overall morphology of the synthesized phosphors were studied with X-ray diffraction and scanning electron microscopy. The optimized LYBO phosphor, i.e., the LYBO phosphor that exhibited the highest X-ray- and ultraviolet (UV)-induced photoluminescent intensities, had a Dy³⁺ concentration of 4 mol%. Photoluminescence analysis showed that this phosphor could be easily excited with near-UV light (300–400 nm). The dominant photoluminescence bands were found in the blue (480 nm) and yellow (577 nm) regions of the visible spectrum. The light yield of the X-ray-induced luminescence of the optimized Li₆Y(BO₃)₃:Dy³⁺ was found to be 66% of that of the commercially available X-ray imaging material, Gd₂O₂S:Tb³⁺ (GOS). The chromaticity coordinates of the Li₆Y(BO₃)₃:Dy³⁺ phosphor were x = 0.34 and y = 0.32, which agree well with achromatic white (x = 0.33, y = 0.33). The results of this study show that the synthesized Li₆Y(BO₃)₃:Dy³⁺ phosphor could be used as X-ray imaging material.     

Sensitization of Tb3+ luminescence with Ce3+ in LaOBr: Tb3+, Ce3+

Luminescence emission and uv-excitation properties of LaOBr: Tb³⁺, LaOBr: Ce³⁺, and LaOBr: Tb³⁺, Ce³⁺ phosphors were studied. The visible emission spectra of La_0.995Tb_0.005OBr consists of⁵D_3,4 →⁷F_3–6 transitions in the wavelength range of 410–630 nm. The excitation of the Tb³⁺ ion gives a broad 4f → 5d transition band at 254 nm and weaker4f → 4f transition lines above 300 nm. The uv-excitation and emission of La_0.995Ce_0.005OBr at 290, 315, 355 (excitation), and 440 nm (emission) originate from transitions between the 4f-ground state and the four crystal field components of the5d²D excited state. The sensitization of Tb³⁺ luminescence in LaOBr with Ce³⁺ at varying concentrations is described and discussed. With increasing Ce³⁺ concentration the ⁵D₃ →⁷F transitions of Tb³⁺ quench totally and the⁵D₄ →⁷F transitions begin to quench gradually. The excitation spectrum of the⁵D₄ →⁷F₅ transition of Tb³⁺ consists of four bands due to Tb³⁺ and Ce³⁺, of which the three Ce³⁺ bands increase in intensity and the Tb³⁺ band decreases as the Ce³⁺ concentration is increased.     

Investigation of Luminescence Properties of Eu3+, Dy3+ and Gd3+ Doped MgAl2Si2O8 Red‐emitting Phosphors

Rare‐earth‐doped aluminosilicates of alkaline earth MgAl₂Si₂O₈: Eu³⁺, Dy³⁺ and MgAl₂Si₂O₈: Eu³⁺, Gd³⁺ were synthesized by the solid state reaction method at 1300 ^oC. The phosphors were characterized by X‐ray powder diffraction (XRD), photoluminescence (PL), thermoluminescence (TL) and scanning electron microscopy (SEM). X‐ray powder diffraction studies show that the phosphors were crystallized in the triclinic crystal system. The phosphors show characteristic broad band phosphorescence of Eu³⁺. This broad band phosphorescence has red emission bands in the range of 580–705 nm corresponding to ⁵D₀ → ⁷F_j (j:0,2,3,4) transitions of Eu³⁺.     

Synthesis and characterization of Eu3+/Dy3+ codoped composite phosphors SrAl2Si2O8/SrAlSi1/2O7/2 via a one-pot nitrate-gel process

Composite phosphors SrAl₂Si₂O₈/SrAlSi_1/2O_7/2 codoped with Eu³⁺ and Dy³⁺ were synthesized via a simple one-pot nitrate-gel process. The thermal decomposition process of the precursor is investigated by thermal analysis, X-ray diffraction and infrared spectroscopy, respectively. The as-prepared Eu³⁺/Dy³⁺ codoped SrAl₂Si₂O₈/SrAlSi_1/2O_7/2 phosphors could yield blue (436 nm), bluegreen (486 nm), yellow (583 nm), and red (617 nm) lights under near-UV 380 nm excitation from a composite matrix produced by spontaneous phase separation during heat treatment of the precursor. Moreover, the effects of Dy³⁺ doping concentration on the structures, defect features, and luminescence properties of the composite phosphors were examined in detail.     

Tunable luminescence and energy transfer process between Tb3+ and Eu3+ in GYAG:Bi3+, Tb3+, Eu3+ phosphors

A series of Eu³⁺ ions co-doped (Gd_0.9Y_0.1)₃Al₅O₁₂:Bi³⁺, Tb³⁺ (GYAG) phosphors have been synthesized by means of solvothermal reaction method. The XRD pattern of GYAG phosphor sintered at 1500 °C confirms their garnet phase. The luminescence properties of these phosphors have been explored by analyzing their excitation and emission spectra along with their decay curves. The excitation spectra of the GYAG:Bi³⁺, Tb³⁺, Eu³⁺ phosphors consists of broad bands in the shorter wavelength region due to 4f⁸ → 4f⁷5d¹ transition of Tb³⁺ ions overlapped with 6s² → 6s¹6p¹ (¹S₀ → ³P₁) transition of Bi³⁺ ions and the charge transfer band of Eu³⁺–O^2?. The present phosphors exhibit green and red colors due to ⁵D₄ → ⁷F₅ transition of Tb³⁺ ions and ⁵D₀ → ⁷F₁ transition of Eu³⁺ ions, respectively. The emission was shifted from green to red color by co-doping with Eu³⁺ ions, which indicate that the energy transfer probability from Tb³⁺ to Eu³⁺ ions are dependent strongly on the concentration of Eu³⁺ ions.     

Gd2O3:Yb3+,Nd3+,Tm3+/SiO2/Ag纳米复合材料的合成及上转换发光性质

通过多步骤的化学法合成了Gd₂O₃：Yb³⁺,Nd³⁺,Tm³⁺/SiO₂/Ag纳米复合材料。利用XRD,TEM,EDS,XPS,CLSM等方法对样品进行表征。实验结果表明,具有低声子能、稳定的化学性质的Gd₂O₃作为上转换发光的基质,当掺杂的敏化剂Nd³⁺离子浓度为1.0%（n/n）,激活剂离子Tm³⁺浓度为0.5%（n/n）时,上转换发光强度达到最大值。此外,表面吸附的Ag纳米颗粒,由于表面等离激元共振耦合作用,使得上转换发光蓝光波段的强度增强1.70倍。     

Crystal structure and pale‐yellow emitting properties of K3Gd1–xDyxB6O12 solid solutions

A new potassium dysprosium polyborate, K₃DyB₆O₁₂, has been prepared via the high‐temperature molten salt method and structurally characterized by single‐crystal X‐ray diffraction analysis. The structure can be described as a three‐dimensional framework composed of isolated bicyclic [B₅O₁₀]^5? groups and Dy³⁺ and K⁺ ions. The Fourier transform IR (FT–IR) and ultraviolet–visible (UV–Vis) spectra were investigated. A series of K₃Gd_1–xDy_xB₆O₁₂ phosphors was prepared and their photoluminescence properties were studied. The K₃Gd_1–xDy_xB₆O₁₂ phosphors exhibit a strong yellow emission band at 577 nm (the ⁴F_9/2→⁶H_13/2 transition of Dy³⁺) under UV excitation of 275 nm (the ⁸S_7/2→⁶I_J transition of Gd³⁺), suggesting the occurrence of the energy transfer Gd³⁺→Dy³⁺. The optimized doping concentration of the Dy³⁺ ion was 8 mol%. We may expect that K₃Gd_1–xDy_xB₆O₁₂ is a promising pale‐yellow emission phosphor for visual displays or solid‐state lighting.     

Novel red-emitting phosphors, (Mg(1−x−y)MnxDyy)Al2Si2O8 and (Mg(1−x−y)MnxTmy)Al2Si2O8

Mn⁴⁺ doped and Dy³⁺, Tm³⁺ co-doped MgAl₂Si₂O₈-based phosphors were prepared by conventional solid state reaction at 1,300 °C. They were characterized by thermogravimetry, differential thermal analysis, X-ray powder diffraction, photoluminescence, and scanning electron microscopy. The luminescence mechanism of the phosphors, which showed broad red emission bands in the range of 600–715 nm and had a different maximum intensity when activated by UV illumination, was discussed. Such a red emission can be attributed to the ²E → ⁴A₂ transitions of Mn⁴⁺.     

Improved water resistance of SrAl2O4: Eu2+, Dy3+ phosphor directly achieved in a water-containing medium

In this paper, a heterogeneous precipitation method utilizing urea hydrolysis was adopted to coat a SiO₂ layer on the surface of SrAl₂O₄:Eu²⁺, Dy³⁺ long persistence phosphors. To avoid phosphor hydrolysis in a water-containing coating medium, the hydrolysis and polymerization reactions of tetraethyl orthosilicate (TEOS) were concerned and carried out. The crystal phases, surface morphologies, hydrolysis stability and water resistance on afterglow properties of coated phosphors were investigated. Scanning electron microscopy, energy dispersive spectrum analysis, transmission electron microscope and Fourier transform infrared spectrum results confirmed that a continuous, uniform and compact SiO₂ coating layer was successfully obtained on the phosphors surface. A theoretical coating amount of 5% or higher was found to be good for hydrolysis stability. Photoluminescence results revealed the coated phosphors showed much better water resistance on afterglow properties than the uncoated phosphor. We also discussed and proposed the hydrolysis restriction mechanism of SrAl₂O₄:Eu²⁺, Dy³⁺ in the water-containing coating medium.     

Up-converted luminescence in Yb,Tm co-doped LaGaO3 phosphors by high-energy ball milling and solid state reaction

LaGaO₃:Tm³⁺, Yb³⁺ powder was synthesized by a high-energy ball milling (HEB) and a conventional solid state reaction (SSR). The X-ray diffraction patterns confirmed the LaGaO₃:Tm³⁺, Yb³⁺ powder phosphors to have an orthorhombic structure. The spectrum consisted of ¹G₄ → ³H₆, weak ¹G₄ → ³F₄, and intense ³H₄ → ³H₆ transition bands within the f¹² configuration of Tm³⁺, together with the ²F_5/2 → ²F_7/2 transition of Yb³⁺. Up-converted emission of the LaGaO₃:Tm³⁺, Yb³⁺ powders were observed under laser diode excitation of 975 nm. The PL intensity of the HEB-LaGaO₃:Tm³⁺, Yb³⁺ powders sintered at 1300 °C were higher than those of all LaGaO₃:Tm³⁺, Yb³⁺ powder samples examined. The energy transition probability of HEB-LaGaO₃:Tm³⁺, Yb³⁺ powders are higher than that of the SSR-LaGaO₃:Tm³⁺, Yb³⁺ powders. Compared to the solid state reaction method, synthesis by high-energy ball milling is simple and provides improved crystallinity of the host.     

Investigation on Luminescence Properties of a Long Afterglow Phosphor Ca2SnO4:Tm3+

A series of new long afterglow phosphors Ca₂SnO₄:x Tm³⁺ were synthesized by using traditional solid‐state reactions. XRD measurements and Rietveld refinement revealed that the incorporation of the Tm³⁺ dopants generated no second phase other than the original one of Ca₂SnO₄, which indicated that the dopants completely merged into the host. The corresponding optical properties were further systematically studied by photoluminescence, phosphorescence, and thermoluminescence (TL) spectroscopy. The results show that the Tm³⁺‐related defects account for the bright bluish green afterglow emission from the characteristic f–f transitions of Tm³⁺ ions. The bluish green long‐lasting phosphorescence could be observed for 5 h by the naked eye in a dark environment after the end of UV irradiation. Two TL peaks at 325 and 349 K from the TL curves were adopted to calculate the depth of the traps, which were 0.45 and 0.78 eV, respectively. The mechanism of the long afterglow emission was also explored.     

Synthesis,Persistent Luminescence,and Thermoluminescence Properties of Yellow Sr3SiO5:Eu2+,RE3+ (RE=Ce,Nd, Dy,Ho, Er,Tm, Yb) and Orange‐Red Sr3−xBaxSiO5:Eu2+, Dy3+ Phosphor

Sunlight‐excitable orange or red persistent oxide phosphors with excellent performance are still in great need. Herein, an intense orange‐red Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ persistent luminescence phosphor was successfully developed by a two‐step design strategy. The XRD patterns, photoluminescence excitation and emission spectra, and the thermoluminescence spectra were investigated in detail. By adding non‐equivalent trivalent rare earth co‐dopants to introduce foreign trapping centers, the persistent luminescence performance of Eu²⁺ in Sr₃SiO₅ was significantly modified. The yellow persistent emission intensity of Eu²⁺ was greatly enhanced by a factor of 4.5 in Sr₃SiO₅:Eu²⁺,Nd³⁺ compared with the previously reported Sr₃SiO₅:Eu²⁺, Dy³⁺. Furthermore, Sr ions were replaced with equivalent Ba to give Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ phosphor, which shows yellow‐to‐orange‐red tunable persistent emissions from λ=570 to 591 nm as x is increased from 0 to 0.6. Additionally, the persistent emission intensity of Eu²⁺ is significantly improved by a factor of 2.7 in Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ (x=0.2) compared with Sr₃SiO₅:Eu²⁺,Dy³⁺. A possible mechanism for enhanced and tunable persistent luminescence behavior of Eu²⁺ in Sr_3?xBa_xSiO₅:Eu²⁺,RE³⁺ (RE=rare earth) is also proposed and discussed.