Simultaneous spectrophotometric determination of nickel and iron in copper-base alloy with bromo-PADAP

The reaction of nickel (II) with Br-PADAP, in the presence of tergitol NPX surfactant, forms a complex with absorption peaks at 520 and 560 nm. The iron(II)-Br-PADAP system at the same conditions forms a chelate with absorption peaks at 560 and 748 nm. This allows the simultaneous spectrophotometric determination of nickel and iron by measuring the absorbance at 560 and 748 nm. The proposed method, at ph 4.0-5.7, shows a molar absorptivity of 1.22 x 10(5)l . mole(-1) . cm(-1) for nickel at 560 nm and 8.20 x 10(4)l . mole(-1) . cm(-1) at 560 nm and 3.35 x 10(4)l . mole(-1) . cm(-1) at 748 nm for iron(II). Beer's law is obeyed up to 0.40 mu/ml of nickel(II) and up to 0.65 mu/ml of iron(II). Thiosulphate as masking agent allows the simultaneous determination of iron and nickel in the presence of high concentrations of copper. The ethylene glycol 2-(2-amino-ethyl) tetracetic acid provides the elimination of many other interferences. The method has been applied successfully to the simultaneous determination of nickel and iron in reference samples.     

Determination of nickel in alloys and plant leaves with salicylaldehyde 3-oxobutanoylhydrazone by spectrophotometry.

A simple and highly sensitive reagent of salicylaldehyde 3-oxobutanoylhydrazone (salicylaldehyde acetoacetic acid hydrazone, SAAH) was synthesized and studied for the spectrophotometric determination of nickel in detail. In the pH range 6, which greatly increased the selectivity, nickel reacted with SAAH to form a 1:1 yellow complex, having a sensitive absorption peak at 405 nm. Under the optimal conditions, Beer's law was obeyed over the range from 0.0117 to 0.1174 microg cm(-3). The apparent molar absorptivity was 3.025 x 10(5) dm3 mol(-1) cm(-1). The detection limit and the variation coefficient were found to be 1.752 ng cm(-3) and 1.0%, respectively. The method has been applied to the quantitative determination of nickel in different alloys and leaves.     

Spectrophotometric determination of nickel with p-acetylarsenazo

A spectrophotometric method for the determination of trace amounts of nickel is described. At pH 6, nickel reacts with p-acetylarsenazo to form a 1:2 coloured complex with an absorption maximum at 630 nm. The apparent molar absorptivity is 6.5 x 10(4) l.mol(-1) . cm(-1) . Beer's law is obeyed over the concentration range of 0-0.8 microg/ml. The proposed method is selective, sensitive and can be applied to the determination of nickel in aluminum alloy.     

Spectrophotometric determination of aluminium and nickel

A simple spectrophotometric method, based on the complexes with xylenol orange (XO) and EDTA, is presented for the rapid determination of aluminium and nickel, respectively, in synthetic samples of hydrotalcite. The method only requires the solubilization in sulphuric acid of the inorganic material before the ligand addition. Under optimum conditions, the complexes Al-XO and Ni-EDTA showed maximum absorption at 554 nm and 380 nm, respectively. The method obeyed Beer's law in the concentration range 0.14-1.8 microg mL(-1) of aluminium, and 30-2730 microg mL(-1) of nickel. Molar absorptivities were 2.45 x 10(4) and 14.85 L mol(-1) cm(-1) while Sandell's sensitivities were 1.1 x 10(-3) and 3.9 microg cm(-2) for aluminium and nickel, respectively. The standard addition technique was used and the recoveries obtained revealed that the proposed procedure shows good accuracy.     

Sensitive spectrophotometric determination of nickel(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A simple, selective and highly sensitive procedure for spectrophotometric determination of nickel has been developed. At pH 5.5, nickel reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in water-ethanol medium to form a red-violet complex which has two absorption maxima, at 520 and 56Onm. The molar absorptivity at 56Onm is 1.26 x 10(5) l.mole(-1).cm(-1). Beer's law is obeyed for 0-15 mug of nickel. Nickel in aluminium alloys and electroplating waste-water has been determined by this method.     

Determination of iron and nickel by flame atomic absorption spectrophotometry after preconcentration on Saccharomyces cerevisiae immobilized sepiolite

Iron and nickel have been preconcentrated on Saccharomyces cerevisiae immobilized sepiolite and determined by flame atomic absorption spectrophotometry (FAAS). Preconcentration studies were conducted by the column method. Effect of pH, amount of adsorbent, elution solution, flow rate and interfering ions on the recovery of the analytes have been investigated. Recoveries of Fe and Ni were 95+/-1 and 99.5+/-0.1%, respectively, at 95% confidence level. The breakthrough capacities of analytes were also investigated and found to be 0.042 mmol g(-1) for Fe and 0.055 mmol g(-1) for Ni. The proposed method was applied to the determination of iron and nickel in brass (NBS SRM 37e). The detection limit of iron and nickel were found as 0.065 and 0.087 mug ml(-1), respectively. The direct determination of trace metals by flame atomic absorption spectrometry (FAAS) is limited and difficult because of low concentration and/or matrix interferences. The proposed method is excellent for the determination of trace metal in matrixes, such as metal alloys.     

Separation and determination of trace amounts of aluminium(III), vanadium(V), iron(III), copper(II) and nickel(II) with CALKS and PAR by RP-HPLC.

An RP-HPLC method for the separation and determination of aluminium(III), vanadium(V), iron(III), copper(II) and nickel(II) with CALKS (Chromazol KS) and PAR ([4-(2-pyridylazo)resorcinol]) chelating on a YWG-ODS column was developed. A mixture of methanol-tetrahydrofuran(THF)-water (60:5:35 v/v) containing 0.2 mol/L LiCl, 5 x 10(-5) mol/L CALKS, 5 x 10(-5) mol/L PAR and acetate buffer solution (pH 4.9) was selected as mobile phase. The method has high sensitivity, with the detection limits being 6 ng/mL for aluminium(III), 3.5 ng/mL for vanadium(V), 10.4 ng/mL for iron(III), 6.3 ng/mL for copper(II) and 8.7 ng/mL for nickel(II). It also has good selectivity, so that most foreign metal ions do not interfere under the optimum conditions. The method can be applied to the simultaneous determination of trace amounts of aluminium, vanadium, iron, copper and nickel in rice and flour samples.     

Cloud point extraction, preconcentration and simultaneous spectrophotometric determination of nickel and cobalt in water samples

Cloud point extraction has been used for the preconcentration and simultaneous spectrophotometric determination of nickel and cobalt after the formation of a complex with 2-amino-cyclopentene-1-dithiocarboxylic acid (ACDA), and latter analysis by spectrophotometer using Triton X-114 as surfactant. The parameters affecting the separation phase and detection process were optimized. Under the optimum experimental conditions (i.e. pH=5, 0.07 mM ACDA, Triton X-114=0.25% (w/v)), calibration graphs were linear in the range of 20-500 and 20-200 microg l(-1) with detection limits of 10 and 7.5 microg l(-1) for Ni and Co, respectively. The method was applied to the determination of Ni and Co in natural and waste water samples with satisfactory results.     

Spectrophotometric and atomic absorption determination of ramipril, enalapril maleate and fosinopril through ternary complex formation with molybdenum (V)-thiocyanate (Mo(V)-SCN)

Three different sensitive and accurate spectroscopic procedures were developed for the determination of three angiotensin-converting enzyme inhibitors, namely, ramipril, enalapril maleate and fosinopril. The first two spectrophotometric (extractive and non-extractive) procedures were based on ternary complex formation with molybdenum(V) thiocyanate. The formed complex can be determined by extraction with chloroform measured at lambdamax 517 nm Beer's law was obeyed in the concentration range from (10--90 microg ml(-1)) for ramipril and fosinopril and (4--36 microg ml(-1)) for enalapril maleate with molar absorptivity 1.2x10(4), 2x10(4) and 3.4x10(4) l mol(-1) cm(-1), respectively, or by direct measurement after addition of benzalkonium chloride as surfactant and measuring the formed ternary complex at lambdamax 545 nm with a linear relationship in the concentration range from (8-7-2 microg ml(-1)), (3--27 microg ml(-1)) and (8--72 microg ml(-1)) for ramipril, enalapril maleate and fosinopril with molar absorptivity 1.5x10(4), 5x10(4) and 2.1x10(4) l mol(-1) cm(-1), respectively. The third procedure is atomic absorption measurement through the quantitative determination of molybdenum content of the complex. These methods hold their accuracy and precision well when applied to the determination of ramipril, enalapril maleate and fosinopril in their dosage forms.     

Selective determination of cobalt using polyurethane foam and 2-(2-benzothiazolylazo)-2-p-cresol as a spectrophotometric reagent

The present work describes a selective, rapid and economical method for the determination of cobalt using the 2-(2-benzothiazolylazo)-p-cresol (BTAC) as a spectrophotometric reagent associated with a solid extraction on polyurethane foam. The BTAC reacts with Co(II) in the presence of Triton-X100 surfactant forming a green complex with maximum absorption at 615 nm. The reaction is used for cobalt determination within a pH range of 6.50-7.50, with an apparent molar absorptivity of 1.62 x 10(4) L mol(-1) cm(-1). Beer's Law is obeyed for a concentration of at least 1.60 microg ml(-1). A selective procedure is proposed for cobalt determination in the presence of Fe(II), Hg(II), Zn(II) and Cu(II) up to milligram levels using masking agents. Polyurethane foam is used for the preconcentration and separation of cobalt from thiocyanate media and this procedure is applied to its determination in nickel salts and steel alloys.     

Spectrophotometric and atomic absorption determination of Ni(II) in fresh and sea waters after preconcentration by flotation

A highly selective and sensitive procedure for flotation separation followed by spectrophotometric determination, confirmed by AAS, of Ni(II) traces is proposed. The maximum flotation separation (100%) is achieved at approximately 25 degrees C in the pH range of 1-3 using sodium diethyldithiocarbamate (as a collector) and oleic acid surfactant. The floated (1 : 2) colored complex is measured spectrophotometrically at 430 nm over a concentration range of 0.5-4.0 microg/g with a molar absorptivity of 0.44 x 10(4) L mol(-1) cm(-1). The procedure was successfully applied for the separation and determination of Ni(II) in fresh and sea waters.     

Extraction and spectrophotometric determination of cobalt(II) with thiobenzoylacetone and simultaneous determination of cobalt and nickel

Thiobenzoylacetone in benzene is used for the extraction and spectrophotometric determination of cobalt at pH 8.4-9.1. The orange-yellow complex is measured at 460 nm. The system conforms to Beer's law over the range 0.20-4.58 microg ml of extract. The colour of the complex is stable for at least 144 hr. Cobalt(II) is quantitatively extracted and determined in the presence of 200:1 (w w ratios) of various ions. The method is made selective by using common sequestering agents such as thiourea or fluoride or by selective extraction with mesityl oxide, tributylphosphate and acetylacetone. It is possible to determine cobalt in the presence of nickel by simultaneous spectrophotometry. The method is rapid, simple, selective and sensitive.     

Spectrophotometric determination of nickel in copper-base alloy with 2-(2-thiazolylazo)-p-cresol

A spectrophotometric method for determination of nickel in copper-base alloy with 2-(2-thiazolylazo)-p-cresol (TAC) is described. The interferences of foreign ions can be eliminated by masking with a mixture of sodium tartrate and sodium thiosulphate. The nickel-TAC complex has low solubility in water, but is soluble in aqueous ethanol. Beer's law is obeyed for 20-70mug of nickel in 50 ml of solution, at pH 5.7. The molar absorptivity at 580 nm is 2.6 x 10(4)l.mole(-1).cm(-1). The method has been applied successfully to determination of nickel in reference samples.     

Spectrophotometric studies on the complexation equilibria of Ni and Pb with 2-carboxy-2-hydroxy-5'-sulfo-formazylbenzene. Simultaneous determination of trace amounts of Ni and Pb

Spectrophotometric studies have been made to investigate the reaction of Nickel and Lead with 2-carboxy-2'-hydroxy-5'-sulfoformazyl-benzene (zincon) in 50%(v/v) ethanol-water at 25 degrees C and an ionic strength of 0.1 M NaClO4. A complete picture of the complexation equilibria in the pH range (4.2-12.0) for nickel and (1.9-11.5) for lead are presented. Simple, rapid, selective and sensitive methods for the spectro-photometric determination of nickel and lead has been developed based on the color reaction of their complexes with zincon. The methods allow the determination of 4.69 microg mL(-1) of nickel at pH = 6.3 (lambdamax = 665 nm) and 10.3 microg ml(-1) of lead at pH = 5.6 (lambdamax = 610 nm). The apparent molar absorptivities were epsilon = 1.3 x 10(4) L mol(-1) cm(-1) for nickel and epsilon = 0.6 x 10(4) L mol(-1) cm(-1) for lead. The interference of a large number of foreign ions and complexing agents has been studied. Thiosulphate, as masking agent allows the simultaneous determination of nickel and lead in the presence of high concentrations of copper. Ascorbic acid, sodium cyanide and or sodium fluoride provide the elimination of many other interferences. The methods have been applied successfully to the simultaneous determination of nickel and lead in an aluminium and non-ferrous alloy.     

Diformylhydrazine as analytical reagent for spectrophotometric determination of iron(II) and iron(III)

The bidentate ligand diformylhydrazine (OHC-HN-NH-CHO), DFH, combines with iron(II) and iron(III) in alkaline media in the pH range 7.3-9.3 to form an intensely colored red-purple iron(III) complex with an absorption maximum at 470 nm. Beer's law is obeyed for iron concentrations from 0.25 to 13 microg mL(-1). The molar absorptivity was in the range 0.3258x10(4)-0.3351x10(4) L mol(-1) cm(-1) and Sandell's sensitivity was found to be 0.0168 microg cm(-2). The method has been applied to the determination of iron in industrial waste, ground water, and pharmaceutical samples.     

Determination of nickel with 2-(2-quinolylazo)-5-diethylaminoaniline as a chromogenic reagent.

A sensitive, selective and rapid method for the determination of nickel based on a rapid reaction of nickel(II) with 2-(2-quinolylazo)-5-diethylaminoaniline (QADEAA) has been developed. In the presence of pH = 6.0 ammonia-ammonium chloride buffer solution and sodium dodecyl sulfonate (SDS) medium, QADEAA reacts with nickel to form a violet complex having a molar ratio of 1:2 (nickel to QADEAA). The molar absorptivity of the complex is 1.38 x 10(5) l mol(-1) cm(-1) at 595 nm. Beer's law is obeyed in the range of 0.01-0.4 microg/ml. This method had been applied to the determination of nickel with good results.     

Highly sensitive colour-reaction of nickel with a new chromogenic reagent benzothiaxolyldiazoaminoazobenzene and its application

The synthesis of benzothiaxolyldiazoaminoazobenzene (BTDAB) is described, and a simple, rapid and sensitive procedure for spectrophotometric determination of nickel has been developed. At pH 9.4, in the presence of emulsifier p-octylpolyethyleneglycol phenylether (OP), the reagent reacts with nickel to form a red 1:3 (metal:ligand) complex. The nickel-BTDAB complex exhibit an adsorption maximum at 550 nm with an apparent molar absorptivity of 1.96 x 10(5) 1 mol(-1) cm(-1), Beer's law is obeyed for nickel in the range 0-7 mug per 25 ml. The proposed method has been applied to the determination of nickel in aluminum alloy with satisfactory results.     

Use of 1-(2-thiazolylazo) 2-naphthol in rapid determination of iron in geological matrices

The present work describes the use of 1-(2-thiazolylazo)-2-naphthol (TAN) as a spectrophotomeric reagent for iron determination. TAN reacts with iron(II) forming a brown complex with absorption maximum at 575 and 787 nm. The following parameters were studied: complex stability, pH effect, amount of the TAN, buffer selection, amount of acetate buffer, reductor effect, order of addition of reagents and adherence to Beer's Law. The results demonstrated that iron can be determined with TAN in a pH range of 4.0-6.2 with an apparent molar absorptivity of 1.83 x 10(4) 1 . mol(-1) . cm(-1) (at 787 nm) and 1.41 x 10(4) 1 . mol(-1) . cm(-1) (at 575 nm). Beer's Law is obeyed for at least 3.00 microg/ml. The TAN reacts with other cations, but at 787 nm only the iron(II)-TAN complex absorbs. So, iron can be determined selectively in the presence of several cations. A procedure based on the direct mixture of the sample and a chromogenic solution is proposed, where iron can be determined rapidly and easily. Such procedures were used for the determination of iron in several geological matrices. No significant differences were obtained for TAN method and certificate results.     

Simultaneous determination of nickel and copper by H-point standard addition method-first-order derivative spectrophotometry in plant samples after separation and preconcentration on modified natural clinoptilolite as a new sorbent

For the simultaneous determination of nickel(ll) and copper(ll) in plant samples, a rapid and accurate method was developed. In this method, solid-phase extraction (SPE) and first-order derivative spectrophotometry (FDS) are combined, and the result is coupled with the H-point standard addition method (HPSAM). Compared with normal spectrophotometry, derivative spectrophotometry offers the advantages of increased selectivity and sensitivity. As there is no need for carrying out any pretreatment of the sample, the spectrophotometry method is easy, but because of a high detection limit, it is not so practical. In order to decrease the detection limit, it is suggested to combine spectrophotometry with a preconcentration method such as SPE. In the present work, after separation and preconcentration of Ni(ll) and Cu(ll) on modified clinoptilolite zeolite that is loaded with 2-[1-(2-hydroxy-5-sulforphenyl)-3-phenyl-5-formaza-no]-benzoic acid monosodium salt (zincon) as a selective chromogenic reagent, FDS-HPSAM, which is a simple and selective spectrophotometric method, has been applied for simultaneous determination of these ions. With optimum conditions, the detection limit in original solutions is 0.7 and 0.5 ng/mL, respectively, for nickel and copper. The linear concentration ranges in the proposed method for nickel and copper ions in original solutions are 1.1 to 3.0 x 10(3) and 0.9 to 2.0 x 10(3) ng/mL, respectively. The recommended procedure is applied to successful determination of Cu(ll) and Ni(ll) in standard and real samples.     

Quinoline-2-aldehyde thiosemicarbazone (QAT) as spectrophotometric reagent for palladium and nickel

A procedure is described for the extractive spectrophotometric determination of nickel and palladium with quinoline-2-aldehyde thiosemicarbazone. At pH 7.5 nickel forms a 1:2 complex which is soluble in chloroform and has an absorption maximum at 460 nm. Palladium forms a 1:2 complex with maximum absorbance at 510 nm which can be extracted into MIBK from 1M HCl. Both complexes are stable and conform to Beer's law. The molar absorptivities for nickel and palladium are 1.58 x 10(4) and 2.6 x 10(3) 1.mole(-1). cm(-1) respectively. The proposed method is suitable for detection and determination of nickel and palladium in the presence of associated metal ions. The results of the analysis of synthetic mixtures and standard samples are reported.