ZnO nanorods decorated calcined Mg–Al layered double hydroxides as photocatalysts with a high adsorptive capacity

The nanocomposites of magnesium–aluminium–carbonate–layered double hydroxides (Mg–Al–CO₃–LDHs) and ZnO nanorods were prepared via a homogeneous precipitation process. The presence of ZnO nanorods made the calcined Mg–Al–CO₃–LDHs, the strong adsorptive adsorbents for anions, have a photocatalytic activity. Both Mg–Al–CO₃–LDHs and the nanocomposites with various ZnO/Mg–Al–CO₃–LDHs mass ratios from 0.5:1 to 3:1 were characterized by X-ray diffraction, transmission electron microscope and UV–vis diffuse reflectance spectra. The nanocomposites quickly adsorbed the anionic dyes such as acid red G (ARG) without the light illumination, and the adsorbed dyes on the recovered nanocomposites were then degraded in a separated photocatalytic reactor. The adsorption ability of the nanocomposites and their photocatalytic activities for the removal of ARG were evaluated by the Fourier transform infrared spectra and UV–vis extinction spectra. The sample at 3:1 ZnO/Mg–Al–CO₃–LDHs mass ratio was shown to have higher photocatalytic efficiencies.     

Apparent Molar Volumes of Sodium Methylbenzoates in N, N-Dimethyl Formamide–Water Mixtures at 298.15 K

Densities of sodium methylbenzoate (o-, m-, p-) have been measured in dimethyl formamide (DMF)–water mixtures at 298.15 K with an oscillating-tube densimeter. From these densities, apparent molar volumes of sodium methylbenzoates in DMF–H₂O mixtures have been calculated and partial molar volumes at infinite dilution have been evaluated. Substituent and solvent effects on the transfer volumes of each isomer from water to DMF–H₂O mixed solvents have also been obtained. The results are explained in terms of solvent–solvent and solute–solvent interactions.     

Thermodynamic Properties of NaCl Solutions at Subzero Temperatures

Heat capacities at infinite dilution of NaCl (aq) for the temperature range 0 to –25°C and apparent molar volumes at infinite dilution for 0 to –15°C have been estimated from a synthesis of experimental data collected at subzero temperatures. The parameters of the Helgeson–Kirkham–Flowers (HKF) equation for Na⁺ (aq) have been obtained, from which the Gibbs energies of Na⁺ and Cl^– have been calculated. The estimated values of Pitzer-equation parameters for thermal and activity-coefficient properties have been adjusted for subzero temperatures. The experimental phase diagram for the NaCl–H₂O system could be reproduced with these data, demonstrating the low-temperature applicability of the HKF model to extrapolate thermodynamic properties of aqueous-solution species at infinite dilution.     

Synthesis and structure of amino esters of menthol

The conditions for the acylation of (–)-menthol with monochloroacetyl chloride have been studied. Amino esters of (–)-menthol have been obtained by the nucleophilic replacement of the chlorine in (–)-menthol monochloroacetate by residues of secondary amines. Their properties and their mass, IR, and¹³C NMR spectra are described.Institute of Physical Organic Chemistry, Academy of Sciences of the Belorussian SSR, Minsk. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 728–733, November–December, 1981.     

Reductive cleavage by metallic sodium in liquid ammonia of cotton lignin

Twofold cleavage with sodium in liquid ammonia of the dioxane lignin and fourfold cleavage of the native lignin from cotton stems have shown that the uncleaved parts of lignin have molecular masses 2–4 times lower than the initial lignins and consist of 15–17 phenylpropane structural units.Institute of the Chemistry of Plant Substances, Uzbek SSR Academy of Sciences, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 412–416, May–June, 1989.     

Distribution studies of metal ions on stannic arsenate in butanol-HNO3 systems: Quantitative separation of Ni−Fe,Ni−Cu,Cd−Hg and Pb−Hg

Summary This paper deals with systematic distribution studies of metal ions on stannic arsenate in butanol-HNO₃ systems. K_d values of metal ions have been determined by the batch process in solvent systems containing varying proportions of butanol and 50% HNO₃. Quantitative binary separations of Ni–Fe, Ni–Cu, Cd–Hg and Pb–Hg have been obtained on the basis of information from the studies.     

Oxomolybdenum(VI) and (V) complexes with 6–methyl-4–hydroxypyrimidinyl hydrazones

Dioxomolybdenum(VI) complexes [MoO2(L)H2O] and oxomolybdenum(V) complexes [Mo2O3(LH)2Cl2] (where LH2=hydrazones derived from 6–methyl-4–hydroxy-2–hydrazinopyrimidine with salicylaldehyde, 5–methyl-, 5–chloro-, 5–bromo-, 3–methoxy-salilcylaldehyde, or 2–hydroxy-1–naphthaldehyde) have been prepared and characterised by spectroscopic and physico-chemical methods. The MoVI complexes are diamagnetic octahedral structures, whilst the MoV complexes are paramagnetic and probably dimeric, via oxobridging.     

Nonempirical calculations of potential-energy surfaces for nucleophilic addition of H− and F− to an acetylene molecule

The minimal energy paths for the nucleophilic addition of a hydride ion (H^–) and a fluoride ion (F^–) to a molecule of acetylene (A) have been calculated with the use of 3–21++G and 3–21+G double basis sets in the framework of the Hartree-Fock-Roothaan method. The values of the total energies of the reactants, transition states, and products have been refined by means of calculations with more complete basis sets [6–31++G// 3–21++G and 6–31++G*//3–21++G for reaction (1); 6–31+G*//3–21+G and 6–31++G**//3–21+G for reaction (2)] and by taking into account the correlation energy for reaction (1) in the framework of the SCEP/6–31++*//3–21++G method. It has been established that the activation energy of reaction (2) is 15.94 kJ/mole lower than that for reaction (1), that reaction (1) is exothermic, and that the enthalpy change accompanying reaction (2) is close to zero. The character of the distribution of the electron density along the minimal energy paths of both reactions has been analyzed, and the differences appearing as a result of the replacement of the soft nucleophile H^– by the harder nucleophile F^– have been ascertained. The results of the calculations have been compared with the results available in the literature for reaction (1).Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 2, pp. 149–155, March–April, 1989.     

Buffer Standards for the Physiological pH of Zwitterionic Compounds,MOBS and TABS from 5 to 55°C

The values of the second dissociation constant, pK₂, and related thermodynamic quantities of 4-(N-morpholino)butanesulfonic acid (MOBS) and N-tris(hydroxymethyl)-4-aminobutanesulfonic acid (TABS) have already been reported over the temperature range 5–55°C including 37{°}C. This paper reports the pH values of twelve equimolal buffer solutions at designated pH (s) with the following compositions: (a) mixtures of MOBS (0.05 mol-kg^–1) + NaMOBS (0.05 mol-kg^–1); (b) MOBS (0.08 mol-kg^–1) + NaMOBS (0.08 mol-kg^–1); (c) MOBS (0.08 mol-kg^–1) + NaMOBS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1); (d) TABS (0.05 mol-kg^–1) + NaTABS (0.05 mol-kg^–1); and (e) TABS (0.08 mol-kg^–1) + NaTABS (0.08 mol-kg^–1); and (f) TABS (0.08 mol-kg^–1) + NaTABS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1). Two buffer solutions have ionic strengths I= 0.05 mol-kg^–1, another two have I=0.08 mol-kg^–1, and the remaining two buffer solutions have I= 0.16 mol-kg^–1, which is close to that of the clinical fluids (blood serum). These buffers have been recommended as a useful pH standard for the measurements of physiological solutions. Conventional pH values of all six buffer solutions from 5–55°C, as well as those obtained from the liquid junction potential correction at 25 and 37{°}C have been calculated. The flowing-junction calomel cell has been utilized to measure E_j, the liquid junction potential.     

Volumetric Properties of Sodium Nitrobenzoate in <Emphasis Type="Italic">N</Emphasis>, <Emphasis Type="Italic">N</Emphasis>-Dimethylformamide–Water Mixtures at 298.15 K

Densities of sodium nitrobenzoate (o-, m-, p-) have been measured in dimethylformamide (DMF)–water mixtures at 298.15 K with an oscillating-tube densimeter. From these densities, apparent molar volumes of sodium nitrobenzoate in DMF–H₂O-mixtures have been calculated and partial molar volumes at infinite dilution have been evaluated. Substituent and solvent effects on the transfer volumes of each isomer from water to DMF–H₂O-mixed solvents have also been obtained. The results are explained in terms of solvent–solvent and solute–solvent interactions.     

Tetrakisisopropoxy tantalum(V)O,O′-alkylene dithiophosphate complexes

Summary Tetrakisisopropoxytantalum(V) alkylene dithiophosphato complexes, (G=–CMe₂CMe₂–, –CHMeCHMe–, –CH₂CMe₂CH₂– and –CH₂CEt₂CH₂–) have been prepared from equimolar ratios of tantalum(V) isopropoxide and alkylene dithiophosphoric acids in benzene. These moisture-sensitive compounds, which are soluble in common organic solvents and are monomeric, have been characterized by elemental analysis, molecular weight determinations and by their i.r. and n.m.r. spectra. An octahedral geometry is suggested in which the ligand is bidentate.     

Catechins and proanthocyanidins ofAlhagi sparsifolia. I

Ten individual compounds have been isolated from the epigeal part ofAlhagi sparsifolia Shap. in various stages of vegetative growth. Their structures have been established by a study of PMR spectra, physicochemical properties, and the products of chemical transformations: (–)-epicatechin, (–)-epigallocatechin, (–)-epigallocatechin gallate, (+)-catechin, (+)-gallocatechin, proanthocyanidin B-2, (–)-epigallocatechin-(4–8)-(–)-epicatechin, epigallocatechin gallate-(4–8)-(–)-epicatechin, proanthocyanidin B-1, and (–)-epicatechin-(4–8)-gallocatechin.The materials of this paper were presented at the Second International Symposium on the Chemistry of Natural Compounds (SCNC, Eskiehir, Turkey, October 22–24, 1996).Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 232–237, March–April, 1997.     

Triterpene and steroid glycosides of the genusMelilotus and their genins III. Funkioside B and protodioscin from the seeds ofMelilotus tauricus

Two steroid glycosides belonging to the furostan series — funkioside B and protodioscin — have been isolated from the seeds of the plantMelilotus tauricus (Bieb.).Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 766–770, November–December, 1994.     

Protein content,activity, and electrophoretic composition of the inhibitor-containing fraction of pea seeds

The amounts of protein and the activities of the proteinase (trypsin) inhibitors of 16 varieties of pea have been studied. The amount of protein ranged from 19.3 to 25.2% and the amidase activities of the trypsin inhibitors from 18 to 40.8 IU. It was found that the electrophoretic spectrum of the inhibitor-containing fraction of the pea seed protein consisted of 12–16 components with molecular masses of 14–89 kDa. Features of the electrophoretic spectrum of some varieties of pea have been established.V. F. Kuprevich Institute of Experimental Botany, Belorussian SSR Academy of Sciences, Minsk. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 243–247, March–April, 1989.     

Osmotic coefficients of dilute aqueous solutions of unsymmetrical cobalt-amine type salts at 0°C

The osmotic coefficients of dilute aqueous solutions of [Co(pn)₃]X₃ [pn=1,2-diaminopropane and X=Cl^–, Br^– and (NO₃)^–] and [Co(tn)₃]X₃ (tn=1,3-diaminopropane and X=Cl^– and Br^–) have been measured from 0.00 to 0.02 mol-kg^–1 at 0°C by the freezing point method. The results have been compared with those obtained from the numerical integration of the Poisson-Boltzmann equation.     

Bisindoles. 18. Some electrophilic substitution reactions in the 1,2-di(indol-5-yl)ethane series

A quantum-chemical calculation has been made and the laws of the electron-density distribution in the molecule of 1,2-di(indol-5-yl)ethane have been determined. The electrophilic substitution reactions most characteristic for it have been studied.For communications 15–17, see [1–3].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 73–77, January, 1984.     

Spectroscopic characterization of environmentally relevant C10-chloroterpenes from a photochemically modified toxaphene standard

Twenty-five pure environmentally relevant toxaphene components have been isolated from photochemically modified technical toxaphene by means of a combination of column chromatography on silica gel and preparative high resolution liquid chromatography. These compounds are 6 chlorinated camphenes (1–3, 5, 7, and 11) and 19 chlorinated bornanes (4, 6, 8–10, 12–16, 18–24, 26, and 27 according to Table 1). Two further chlorobornanes (17 and 25) have been isolated from a highly chlorinated mixture obtained by the excess chlorination of 2-exo,10-dichlorobornane. The structural elucidation of the isolated compounds has been carried out with spectroscopical methods.     

Chemical synthesis and enzymatic assembly of fragments of the DNA coding immunodominant epitopes of human immunodeficiency virus

More than twenty 13- to 55-membered oligo(poly)nucleotides have been synthesized by the H-phosphonate solid-phase method in the manual variant using an original procedure. From the oligonucleotides obtained, seven DNA duplexes coding immunodominant epitopes of HIV-1 proteins have been formed: 598–609 and 737–748 gp41, 91–115 and 105–115 gag, and 940–951 pol and a number of its mutants. The ligase assembly and polymerization of the DNA duplexes obtained has been carried out. The efficiency of ligation amounted to from 60 to 90%. The possibility of their directed polymerization was determined by the flanking of the duplexes by partially completed half-sites of restrictases BamHI and XhoI.Abbreviations adopted: HIV-1 — human immunodeficiency virus, type 1; (+)-chain — the coding chain — and (–)-chain the chain complementary to the coding chain of the DNA duplex; CPG — controlled-pore glass; PAAG — polyacrylamide gel; Py — pyridine.D. I. Ivanovskii Institute of Virology, USSR Academy of Medical Sciences, Moscow. V. A. Engel'gardt Institute of Molecular Biology, USSR Academy of Sciences, Moscow. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 393–399, May–June, 1990.     

Osmotic and Activity Coefficients of CH3SO4Na(aq) and CH3SO4K(aq) at 25°C

The osmotic and activity coefficients of aqueous sodium and potassium methyl sulfates have been determined at 25°C by the isopiestic method, in the molality range from ca.0.2 to 25 and 19 mol-kg^–1, respectively. The results have been discussed in terms of the ion–ion and ion–water interactions on the basis of the Pitzer and Mayorga model and a method developed in our laboratory.     

Microdistributions of Electrolytic Alloys and Their Components

Microdistributions of Cu–Ni and Cu–Co alloys electrodeposited from pyrophosphate; Ni–Cu, from sulfate–chloride and pyrophosphate–ammonium; Cu–Zn, from pyrophosphate and cyanide; Cu–Cd, from sulfate and pyrophosphate; and Ni–Cd, Ni–Co–Cd, and Zn–Cd, from sulfate, sulfate–chloride, pyrophosphate, chloride–ammonium, and acetate electrolytes are studied. The coatings' microprofile depends on the kinetics of reduction of each component and mutual influence of electrochemical processes at the cathode. Copper accelerates and cadmium inhibits the reduction of the second component of alloys, no matter the electrolyte type, reduction kinetics, and metal nature. In antileveling conditions, the diffusion-controlled Cu reduction accelerates the reduction of the second component of alloys and ensures deposition of coatings whose microprofiles are more uniform than expected from diffusion limitations only. Depolarizing action of Cu during the Cu–Zn deposition from a cyanide electrolyte can completely neutralize differences in the rates of supply of reduced metal ions; hence a constant chemical composition of the coating over its microprofile. Inhibiting action of the diffusion-controlled Cd deposition provides for leveling properties of electrolytes from which Ni–Cd, Ni–Co–Cd, and Zn–Cd alloys are deposited; the chemical composition of these deposits is nonuniform over their microprofiles.