Calorimetric, NMR, and UV Investigations of Aliphatic l-Amino Acids Complexation by Calix[4]arene Bis-hydroxymethylphosphous Acid

The stability constants, enthalpy ΔH ⁰, entropy ΔS ⁰, and Gibbs energy ΔG ⁰ were determined for the host–guest complexes (1:1) of calix[4]arene bis-hydroxymethylphosphous acid with glycine, l-alanine, l-valine, l-leucine, l-isoleucine residues in methanol solution with the aid of the titration experiments followed by calorimetric and spectroscopic (¹H NMR, UV) methods. The experimental data indicated that the host–guest complexation was under control of the direct electrostatic interaction between negatively charged calixarene phosphoryl group and amino acid residue NH ₃ ⁺ group, modulated by the hydrophobic interaction, which drive the inclusion of the residue alkyl side-chain into the calixarene cavity. The stability of the inclusion complexes was found correlated with the size of the aliphatic amino acid’s side-chain. The experimental data were additionally analyzed in the terms of the three state model corresponding to coexistence of 2:1 and 1:1 complexation equilibria.     

Determination of alkali metal ion binding selectivities of calixarenes by matrix-assisted laser desorption ionization and electrospray ionization in a quadrupole ion trap

Matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) and electrospray ionization mass spectrometry (ESI-MS) are used to evaluate the alkali metal ion binding selectivities of a series of calixarenes. Each calixarene of interest is mixed with one or more alkali metal salts (1:100 ratio of calixarene to metal), either in the ESI solution or on the MALDI probe surface, and the relative binding selectivities are directly determined from the intensities of the calixarene/metal complexes in the mass spectra. For t-butylcalix[4]arene-tetraacetic acid tetraethyl ester (calixarene 1), complexation of Na⁺ is favored over complexation of K⁺, in agreement with prior solution results obtained by conventional methods. For the three calixarenes that do not have t-butyl groups on the upper rims, the calixarenes preferentially bind K⁺ over Na⁺, thus demonstrating that size selective complexation can be probed with both the ESI and MALDI methods. Collision-activated dissociation results indicate that the phenyl oxygens, but not necessarily the ethoxy ethyl oxygens of the lower rims, are the primary binding sites for the alkali metal ions.     

Solid State Confinement of Ferrocene by Calixarenes

Combinations of ferrocene with unsubstituted calix [n]arenes, n =4 and 5, in toluene afford crystalline inclusion complexes (calix[4]arene) ₃ (ferrocene) [hexagonal, a =14.7797(4), c =18.4400(4) Å, P6M₃/m , ρ = 1.389 g.cm ^?1 , Z =2, R ₁ =0.0963 (on 1401 observed data [ I >2 σ ( I )])] as a lattice-type inclusion complex, and (calix[5]arene)(toluene) _0.55 (ferrocene) _0.45 [monoclinic, a =9.6908(8), b =15.069(1), c =22.957(1) Å, β = 90.155(5)°, P2₁/m , ρ =1.318 g.cm ^?1 , Z =4, R ₁ =0.1005 (on 3130 observed data [ I >2 σ ( I )])], that shows endo -cavity complexation of ferrocene by the calixarene.     

Dimeric molecular capsules under redox control

A new tetraferrocenylurea calix[4]arene was prepared in order to investigate its dimerization properties. 1H NMR spectroscopic data clearly established that this calixarene forms stable dimeric molecular capsules in chloroform solution. The dimeric capsules are stabilized by the formation of multiple hydrogen bonds between the urea functional groups on the calixarene upper rims. In the dimer, eight ferrocene groups are held in proximity to the "seam" of hydrogen bonds. Upon oxidation of the ferrocene residues, electrochemical, PGSE NMR, and IR spectroscopic data revealed that the hydrogen bonds are broken, leading to the dissociation of the dimeric molecular capsule.     

Synthesis and characterization of low-melting ferrocenyl salts: a study of thermal and photochemical redox reactions

Abstract

The syntheses of bis(trifluoromethane) sulfonimide N-(ferrocenylmethyl) N,N,N-trimethyl ammonium salt 1 and bis(trifluoromethane) sulfonimide N′,N-bis(ferrocenylmethyl) inmidazolium salt 2 are reported. The compounds show low melting points, 76° and 125?°C, respectively, and were characterized by spectroscopic techniques ¹H-NMR, mass spectrometry, FT-IR spectroscopy, cyclic voltammetry, and XRD crystallographic analysis. Cyclic voltammetry results demonstrate that both salts have a quasi-reversible electrochemical behavior, similar to the reversible one shown by ferrocene under the same conditions. In the case of 1, a coupled chemical reaction was detected at slow scan rates after the oxidation. Transient species in the redox processes were investigated using flash photolysis and pulse radiolysis. In both cases, transient spectra of the products were similar to transient spectra observed for ferrocene. The decay kinetics of the oxidized and reduced transients were examined and mechanistic information was obtained. The experimental results show the potential uses of the two complexes as catalytic materials for electrochemical applications.     

Electrochemical determination of electroinactive guests of β-cyclodextrin at a self-assembled monolayer interface

A novel determination method of electroinactive molecules by means of electrochemical technique is presented. A new self-assembled monolayer containing cyclodextrin (CD) is prepared with mono(6-o-p-tolylsulfonyl)-β-cyclodextrin. Although this derivatization process leads to a β-CD coverage of 10% of a full monolayer, this layer shows an effective host-guest response to ferrocene. The interfacial ferrocene complexation gives a response similar to that expected for a Langmuir adsorption isotherm yielding a stability constant of 4.2 ×104 mol-1· L and a maximum ferrocene coverage of 8.6×10-12 mol/cm2. The redox peak currents of the surface-confined ferrocene decrease upon addition of competing β-CD guest species to the solution, such as m-toluic acid (mTA) and sodium dodecyl sulfonate (SDS). This principle has been used for the determination of the electroinactive molecules, mTA and SDS in the concentration ranges of 0.8-2.7 μmol/L and 5-100 nmol/L, respectively.     

Selective Binding of Imidazolium Cations in Building Multi‐Component Layers

Addition of 1‐alkyl‐3‐methylimidazolium (C_n‐mim) cations 3 – 5 to a mixture of bis‐phosphonium cation 2 and sodium p‐sulfonatocalix[4]arene ( 1 ) in the presence of lanthanide ions results in the selective binding of an imidazolium cation into the cavity of the calixarene. The result is a multi‐layered solid material with an inherently flexible interplay of the components. Incorporating ethyl‐, n‐butyl‐ or n‐hexyl‐mim cations into the multi‐layers results in significant perturbation of the structure, the most striking effect is the tilting of the plane of the bowl‐shaped calixarene relative to the plane of the multi‐layer, with tilt angles of 7.2, 28.9 and 65.5°, respectively. The lanthanide ions facilitate complexation, but are not incorporated into the structures and, in all cases, the calixarene takes on a 5? charge, with one of the lower‐rim phenolic groups deprotonated. ROESY NMR experiments and other ¹H NMR spectroscopy studies establish the formation of 1:1 supermolecules of C_n‐mim and calixarene, regardless of the ratio of the two components, and indicate that the supermolecules undergo rapid exchange on the NMR spectroscopy timescale.     

On the Complex Formation of Tris-(dipivalomethanato)-europium with Pyridine

The complexation of the shift reagent tris-(dipivalomethanato)-europium with pyridine in deuteriochloroform has been studied by means of ¹H-NMR. Shift parameters S = 28.0, 9.9, and 9.2 ppm respectively for pyridine protons 2, 3 and 4 are obtained. The results indicate that the shift reagent complexes a single pyridine molecule with an association constant K₁ > 100 mole^?1l.     

Synthesis of per-O-(carboxymethyl)calix[4]pyrogallols and their complexation with some alkaline metal and lanthanide ions

Complexones of a new class, viz., carboxy-functionalized calix[4]pyrrogallols, were synthesized. The per-O-(carboxymethyl)calix[4]pyrogallols obtained were established to exist in the (rel, cis, trans, trans)-configuration by 2D NMR spectroscopic data. According to the pH-potentiometric data, the interaction of these compounds with alkaline metal ions (Li⁺, Na⁺, K⁺, Cs⁺) and lanthanide ions (La³⁺, Gd³⁺, Lu³⁺) in a water—DMSO system produces 1 : 1 complexes. The specific features of complexation of per-O-(carboxymethyl)calix[4]pyrogallols, as compared to their acyclic analogs, with alkaline metal and lanthanide ions are due to the cooperative effect of donor groups preorganized on the calixarene matrix.     

Synthesis and electrochemical sensing behaviour of a new ferrocene functionalized tet ‘a’ macrocyclic receptor towards transition metal ions

A new ferrocene functionalized macrocyclic receptor 1,8‐bis(ferrocenylmethyl)‐5,5,7,12,12,14‐hexamethyl‐1,4,8,11‐tetraazacyclotetradecane (R) has been designed and synthesized to study its potential application as chemosensor. The receptor has been characterized by spectral techniques and X‐ray diffraction. The compound crystallizes in the orthorhombic space group Pcab with four molecules in a unit cell (half‐a‐molecule in the asymmetric unit). The electrochemical studies of the receptor in dioxane–water (7:3 v/v, 25 °C) indicate that the receptor is pH‐dependent with a displacement of E_1/2 to more anodic potentials with a decrease in the pH from 12 to 5. The electrochemical behaviour of R was also studied in the presence of Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ in dioxane–water (7:3 v/v, 25 °C, [Buⁿ₄N][ClO₄]), showing that upon complexation the ferrocene–ferrocenium half‐wave potential shifts anodically in relation to that of the free receptor. The maximum electrochemical shift (ΔE_1/2) of 46 mV was found in the presence of Cu²⁺, followed by Co²⁺ (20 mV), Mn²⁺ (15 mV), Ni²⁺ (13 mV) and Zn²⁺ (9 mV). Moreover, the receptor R is able to electrochemically and selectively sense Cu²⁺ in the presence of the other transition metal cations studied. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of 3-Methoxy- and 3-(β-D-Glucopyranosyloxy)flavylium Ions. Influence of the flavylium substitution pattern on the reactivity of anthocyanins in aqueous solution

The synthesis of 3-glycosyloxylated flavylium ions (anthocyanins), in particular of callistephin ( 4 ), a natural anthocyanin, is described. The structural transformations in aqueous solution and molecular complexation with chlorogenic acid ( 7 ) and caffeine ( 8 ) of the synthesized pigments 3 and 4 are investigated and compared to those of the corresponding 3-methoxyflavylium ions 1 and 2 and to those of oenin ( 5 ) and malvin ( 6 ), two very common natural anthocyanins. The results are discussed in terms of the role played by the glycosyloxy residues in the chemical properties of anthocyanins. Anthocyanin molecular complexation (copigmentaion) is quantitatively investigated by UV/VIS spectroscopy and ¹H-NMR. In particular, the UV/VIS spectroscopic data are interpreted using a general theoretical treatment, which, e.g., allows to demonstrate the formation of molecular complexes between the colourless forms of an anthocyanin and 8 .     

Octamethyl‐1, 1′‐di(2‐pyridyl)ferrocene: A Redox‐Active Ligand with a Pronounced Selectivity for Divalent Metal Ions

Octamethyl‐1, 1′‐di(2‐pyridyl)ferrocene ( 1 ) acts as molecular electrochemical sensor for magnesium, calcium, zinc, and cadmium ions in acetonitrile solution. The new redox peak, anodically shifted by ca. 0.40 V, which appears in the cyclic voltammogram of 1 in the presence of even small amounts (10 mol %) of these ions, is unaffected by an excess of alkali metal ions. Metal complexation is accompanied by a batho‐ and hyper‐chromic shift of the band in the visible region of the UV‐Vis spectrum of 1 . A detailed study of the behaviour of 1 towards zinc chloride in acetonitrile solution has revealed that 1 is able to accommodate a maximum of two zinc ions. Oxidation of zinc‐coordinated 1 leads to partial decomplexation. The N‐methyl and N‐benzyl species 1 Me⁺, 1 Me₂²⁺, 1 Bzl⁺ and 1 Bzl₂²⁺ have been synthesized and the former two structurally investigated by X‐ray diffraction. Alkylation causes an anodic shift of the redox potential of the ferrocene nucleus, which is linearly dependent on the number of alkyl groups introduced. Octamethyl‐1, 1′‐di(2‐thiophenyl)ferrocene ( 2 ) has also been synthesized and structurally characterized by X‐ray diffraction. Cyclic voltammetry has revealed that, in contrast to 1 , 2 does not respond to the divalent metal ions studied.     

Fluorescent chemosensors based on a new type of lower rim-dansylated and bridge-substituted calix[4]arenes

The synthesis, structural and chemosensing properties of several lower rim-dansylated calix[4]arenes bearing different methylene bridge substituents are described. Compared to bridge-unsubstituted pendants neither the conformational nor the fluorescence characteristics of the calixarene core are perceptibly influenced by the bridge substituent. X-ray structure as well as NMR measurements indicates the lower rim-propoxylated and-dansylated calixarenes to adopt the cone conformation capable of the complexation of Cu²⁺ ions at micromolar level. Fluorescent measurements point to selective 1:2 calixarene: Cu²⁺ complex formation with sensing parameters being of a suitable level to make the use as a potentially immobilisable chemosensor for the detection of Cu²⁺ ions promising.     

Multichannel recognition of hydrogen sulphate anion by a Zn(II)–triazole–pyridine complex bearing a ferrocenyl pendant

Receptors ferrocene–triazole–pyridine triads assembled with Zn(II) or Cd(II) metal cations behave as chemosensor molecules for HSO₄ ^?  anions through electrochemical and optical channels: the redox peak of the ferrocene/ferrocenium redox couple is shifted cathodically by 72–53 mV, and a new absorption band appeared in the UV–vis spectrum upon complexation with the HSO₄ ^?  anion. Association constants, detection limits and stoichiometries of the recognition processes have been determined, whereas ¹H NMR experiments and density functional theory calculations are used to suggest the plausible binding mode taking place in the new supramolecular assembly formed.     

Self-complementary Tetracationic Cyclophanes Containing 4,4′-Bipyridinium and 2,5-Dimethoxy-1,4-xylyl Subunits

4,4′-Bipyridinium-based tetracationic cyclophanes containing a 2,5-dimethoxy-1,4-xylyl unit were synthesized by using either m-terphenyl building blocks or incorporating a 4-hydroxy benzyl spacer between the complementary subunits. The cyclophanes show weak intramolecular charge-transfer (CT) bands in the visible region and one of the cyclophanes formed a green-coloured CT complex with ferrocene with an association constant (K _a) of 6.3?M^?1. The electrochemical parameters obtained for the cyclophanes indicate that all the redox processes are reversible.     

Calixcrowns and related molecules

The synthesis of 1,2- and 1,3-calix[4]-bis-crowns, double calix[4]arenes and double calixcrowns have been shown to depend on the reaction conditions (nature of the base, structure of the ditosylates, and the stoichiometry of the reactants). The 1,3-alternate conformation of the 1,3-calix[4]-bis-crowns was shown to be favourable to the selective complexation of cesium cation. The observed Na⁺/Cs⁺ selectivity was exploited in separation processes using them as carriers in transport through supported liquid membranes (SLMs). The best Na⁺/Cs⁺ selectivity (1/45 000) was observed for the naphthyl derivative 7. Calix(aza) crowns and 1,3-calix[4]-bis-(aza)-crowns were also produced through the preliminary formation of the Schiff base-calixarenes, which were further hydrogenated. The syntheses consisted of the 1,3-selective alkylation of calixarenes followed by cyclization into a 1,3-bridged calixarene or by the direct 1,3-capping of the calixarene with appropriate ditosylates. Soft metal complexation by these ligands is also presented.This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

Optical Spectroscopy and Theoretical Studies in Calixarene Chemistry

This review summarizes different applications of optical spectroscopic methods in calixarene chemistry including UV/Vis spectrometry, vibrational spectroscopic techniques (FTIR and Raman spectroscopy), luminescence spectroscopy (including fluorescence and phosphorescence), ellipsometry and various optical microscopic methods. Moreover, the results of theoretical studies (AM1, PM3, DFT, ab initio, etc.) are summarized based on selected papers in the field of conformational studies, thermodynamics and complexation features. About 300 references are processed systematically from the results reported mainly in the recent years with emphasis on the potential of practical application of these molecules.     

Noncovalent linkage of telechelic oligo(dimethylsiloxanes) via end group attachment of host‐cyclodextrins and guest‐adamantanes or guest‐ferrocenes

In this article, we report the noncovalent linkage of terminal substituted oligo(dimethylsiloxanes) bearing cyclodextrins (CD) as host endgroups and adamantan or ferrocene, respectively, as guest endgroups. Structural characterization was performed by ¹H NMR‐, IR‐, and mass spectroscopy. Electron microscopy studies show significant differences in the surface structure of the individual derivatives. In addition, the ferrocene‐terminated di‐and poly(dimethylsiloxanes) are distinguished by a red‐ox activity and reversibility, which also makes the complexes between the ferrocene‐ and CD functionalized siloxanes switchable via electrochemical stimuli. The evidence for a successful complexation of the end groups, and thus the successful supramolecular formation of the siloxane strands, was even performed by shift of the protons in the ¹H NMR spectra. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2472–2482     

Characterization of polybenzoxazine and its electrochemical polymerization mechanism

Poly(3-(p-methyl)benzyl-3,4-dihydro-6-methyl-2H-1,3-benzoxazine) (poly(pCpT)), which was obtained from electrochemical polymerization in acetonitrile/alkali aqueous solution, was characterized by FT-IR, UV-Vis and ¹H-NMR. The results indicate a ring-opening structure of the polymer. By using a rotating-ring disc electrode (RRDE), the electrochemical behaviors of polymerization were studied and the polymerization mechanism was proposed.     

Synthesis,characterization and crystal structure of 6-ferrocenyl-2,4-dihydroxy-2,4-di(pyridine-2-yl) cyclohexanecarbonyl ferrocene

A novel ferrocene derivative which has four stereo centers has been prepared by an efficient synthetic method based on a solvent-free reaction. The compound was characterized by IR, ¹H-NMR, ¹³C-NMR, ESI-MS, single crystal X-ray diffraction and TG analysis. The crystal structure shows that the cyclohexyl group is in a chair conformation and the two ferrocenyl moieties are nonequivalent. There are two intramolecular hydrogen bonds and two intermolecular hydrogen bonds in the compound, which involve two hydroxyls and generate a dimer, respectively. The electrochemical properties of the compound are discussed.