Fluorinated Photodynamic Therapy Device Tips and their Resistance to Fouling for In Vivo Sensitizer Release

We describe progress on a one‐step photodynamic therapy (PDT) technique that is simple: device tip delivery of sensitizer, oxygen and light simultaneously. Control is essential for their delivery to target sites to generate singlet oxygen. One potential problem is the silica device tip may suffer from biomaterial fouling and the pace of sensitizer photorelease is slowed. Here, we have used biomaterial (e.g. proteins, cells, etc.) from SQ20B head and neck tumors and whole blood for an assessment of fouling of the silica tips by adsorption. It was shown that by exchanging the native silica tip for a fluorinated tip, a better nonstick property led to an increased sensitizer output by ~10%. The fluorinated tip gave a sigmoidal photorelease where singlet oxygen is stabilized to physical quenching, whereas the native silica tip with unprotected SiO–H groups gave a slower (pseudolinear) photorelease. A further benefit from fluorinated silica is that 15% less biomaterial adheres to its surface compared to native silica based on a bicinchoninic acid assay (BCA) and X‐ray photoelectron spectroscopy (XPS) measurements. We discuss how the fluorination of the device tip increases biofouling resistance and can contribute to a new pointsource PDT tool.     

Enhanced Charge Transfer,Transport and Photovoltaic Efficiency in All‐Polymer Organic Solar Cells by Polymer Backbone Fluorination

We successfully designed and synthesized two BDT‐BT‐T (BDT=benzo[1,2‐b:4,5‐b']dithiophene, BT‐T=4,7‐dithien‐2‐yl‐2,1,3‐benzothiadiazole) based polymers as the electron donor for application in all‐polymer solar cells (all‐PSCs). By adopting N2200 as the electron acceptor, we systematically investigated the impact of fluorination on the charge transfer, transport, blend morphology and photovoltaic properties of the relevant all‐PSCs. A best power conversion efficiency (PCE) of 3.4% was obtained for fluorinated PT‐BT2F/N2200 (BT2F=difluorobenzo[c][1,2,5]thiadiazole) all‐PSCs in comparison with that of 2.7% in non‐fluorinated PT‐BT/N2200 (BT=benzothiadiazole) based device. Herein, all‐polymers blends adopting either non‐fluorinated PT‐BT or fluorinated PT‐BT2F exhibit similar morphology features. In depth optical spectrum measurements demonstrate that molecular fluorination can further enhance charge transfer between donor and acceptor polymer. Moreover, all‐polymer blends exhibit improved hole mobilities and more balanced carriers transport when adopting fluorinated donor polymer PT‐BT2F. Therefore, although the PCE is relatively low, our findings may become important in understanding how subtle changes in molecular structure impact relevant optoelectronic properties and further improve the performance of all‐PSCSs.     

Optimization of HDPE direct fluorination conditions by XPS studies

A fluorination reactor was designed and built in the laboratory. The optimal conditions of fluorination within the reactor were selected by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) analysis of fluorinated surfaces of a film and a plaque of pure high-density polyethylene (HDPE). This reactor was used to post-mould fluorinate plaques and films of a range of mixtures of virgin and recycled HDPE with and without (re)introduction of additives. The ability to be fluorinated has shown no dependence on the composition virgin/recycled HDPE.Comparison of in-line and post-mould fluorinated samples showed that fluorine concentration profile in depth is thinner in the in-line fluorinated sample when compared with the post-mould fluorinated sample, though the fluorination degree in the extreme surface is larger in the in-line fluorinated sample. This is attributed to a migration of lower surface energy chain blocks towards the surface in the material at high temperatures, which is the case in the in-line fluorination, hindered in the post-mould fluorination where maximum temperature is below the melting point to keep the macroscopic shape. The additives played a minor role in the ability of the surface to be fluorinated.     

Fluorinated liquid-enabled protein handling and surfactant-aided crystallization for fully in situ digital microfluidic MALDI-MS analysis

A droplet (digital) microfluidic device has been developed that enables complete protein sample preparation for MALDI-MS analysis. Protein solution dispensing, disulfide bond reduction and alkylation, tryptic digestion, sample crystallization, and mass spectrometric analysis are all performed on a single device without the need for any ex situ sample purification. Fluorinated solvents are used as an alternative to surfactants to facilitate droplet movement and limit protein adsorption onto the device surface. The fluorinated solvent is removed by evaporation and so does not interfere with the MALDI-MS analysis. Adding a small amount of perfluorooctanoic acid to the MALDI matrix solution improves the yield, quality and consistency of the protein-matrix co-crystals, reducing the need for extensive 'sweet spot' searching and improving the spectral signal-to-noise ratio. These innovations are demonstrated in the complete processing and MALDI-MS analysis of lysozyme and cytochrome c. Because all of the sample processing steps and analysis can be performed on a single digital microfluidic device without the need for ex situ sample handling, higher throughput can be obtained in proteomics applications. More generally, the results presented here suggest that fluorinated liquids could also be used to minimize protein adsorption and improve crystallization in other types of lab-on-a-chip devices and applications.     

Synthesis, characterization and properties of a novel fluorinated polyurethane

A novel fluorinated polyurethane (FPU) was prepared by fluorinated polyether glycol (PTMG-g-HFP) as a soft segment, 1,6-hexamethylene diisocyanate (HDI) or toluene diisocyanate (TDI) as a hard segment and 1,4-butanodiol (BDO) as a chain extender. Fourier transform infrared spectroscopy (FTIR), ¹H NMR, ¹³C NMR and gel permeation chromatography (GPC) were used to characterize the structure of the fluorinated polyurethane. The thermal stabilities of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were studied by thermogravimetric analysis (TGA). X-ray photoelectron spectroscopy (XPS) analysis at two different sampling depths for the fluorinated polyurethane was used to investigate the surface compositions of FPU. And the mechanical properties of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were also measured. Chemical resistance of polyurethane films was estimated through spot tests with different solvents. The results showed that FPU had high thermal stability, strain-hardening property and good chemical resistance. The XPS measurements showed the fluorine enrichment on the surface of FPU.     

Fluoropolymer materials and architectures prepared by controlled radical polymerizations

This review initially summarizes the mechanisms, merits and limitations of the three controlled radical polymerizations: nitroxide mediated polymerization (NMP), atom transfer radical polymerization (ATRP) or metal catalyzed living radical polymerization, and reversible addition-fragmentation chain transfer (RAFT) polymerization. This is followed by two parts, one dealing with homo- and copolymerizations of fluorinated methacrylates and acrylates, and a second where fluorinated styrenes, alone or in combination with other monomers, are the main issues. In these parts, initiators (including multifunctional and macroinitiators), ligands and other reaction conditions as well as some kinetics and conversions are discussed. Numerous possibilities for preparation of a variety of different block copolymers where one or more blocks are fluorinated are devoted particular attention. The advantageous properties and functionalities that can be obtained from these novel fluorinated materials and architectures are especially emphasized. Thus, various amphiphilic, biocompatible or low energy materials, fluorinated nanoparticles and nanoporous films/membranes as well as materials for submicron and nanolevel electronics have been fabricated. In addition, the possible fluorination of various surfaces through surface initiation is highlighted. A final part deals with the use of fluorine containing initiators and macroinitiators, and the applications on the novel materials derived thereof.     

Synthesis and characterization of fluorinated polyurethane containing carborane in the main chain: Thermal,mechanical and chemical resistance properties

In this study, two fluorinated polyurethanes(FPU) containing carborane groups in the main chains were firstly designed and synthesized via the reaction of hexamethylene diisocyanate trimer(HDI trimer) with fluorinated polyesters(CFPETs) having hydroxyl-terminated carborane groups at room temperature. The structures of carborane fluorinated polyesters(CFPETs) and polyurethanes(CFPUs) were characterized by gel permeation chromatography(GPC), Fourier transform infrared(FTIR) spectroscopy and nuclear magnetic resonance(NMR) measurements. The thermal stability, mechanical properties, Shore A hardness, solvent resistance and acid-alkali resistance of the carborane fluorinated polyurethane films were also studied. Thermogravimetric analysis(TGA) tests manifested that the introduction of carborane groups into the main chain of fluorinated polyurethane endowed the obtained fluorinated polyurethane with excellent thermal stability. The thermal decomposition temperature of carborane fluorinated polyurethane(CFPU) increased by 190 °C compared with that of the carborane-free fluorinated polyurethane(FPU). Even at 800 °C, CFPU showed the char yield of 66.5%, which was higher than that of FPU(34.3%). The carborane-containing fluorinated polyurethanes also showed excellent chemical resistance and prominent mechanical property even after the cured films being immersed into Jet aircraft oil or 37% HCl for 168 h or at high temperature(700 °C). It is found that the structural characteristics of carborane group and the compacted structure of CFPU effectively improve the thermal stability, mechanical property, solvent resistance and acid-alkali resistance of the carborane-free fluorinated polyurethane. These excellent properties make CFPU as the useful raw materials to prepare the high temperature resistant coatings or adhesives for automotive engines, engine or fuel tank of aircraft and other equipment working in high-temperature or high concentrations of acid-alkali environments.     

Insight into the ATRP rate controlling ability of initiator structure: Micromolecular,macromolecular, and immobilized initiators

The equilibrium constant (K_ATRP) is a key factor for ensuring a successful atom transfer radical polymerization (ATRP), which guarantees a controlled process with predictable product properties. In this work, the effect of initiator type (i.e., micromolecular, macromolecular, and immobilized initiator) on the ATRP kinetics was studied through a developed mathematical model. It was validated thoroughly via experiments using fluorinated monomer (2,2,3,3,4,4,4‐heptafluorobutyl methacrylate) as model component. The results show that the activity and deactivity of the copper(I) chlorine/1,1,4,7,7‐pentamethyldiethylenetriamine (Cu^ICl/PMDETA) heterogeneous catalytic complex is the highest for ethyl 2‐bromoisobutyrate (Eib‐Br), lower for bromo‐poly(styrene) (PS‐Br), and the lowest for bromo‐aminopropyl functionalized SiO₂ (SiO₂‐APTS‐Br). The initiation system of Eib‐Br with Cu^ICl/4,4′‐dinonyl‐2,2′‐bipyridyl (dNbpy) has relatively lower activating ability, but the polymerization keeps controllable by its higher deactivating ability. In addition, this homogeneous catalytic system (Cu^ICl/dNbpy) is facile for further implementing the developed model to guide for the preparation of fluorinated gradient copolymers by semi‐batch ATRP. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2228–2238     

高热稳定性氟化聚酰亚胺的合成及在热光开关中的应用

用一种新型超支化氟化聚酰亚胺(FHBPI)作为波导材料制备了聚合物热光开关. 采用DSC, TGA, 近红外吸收谱和原子力显微镜(AFM)等方法对FHBPI的热稳定性及光学特性进行了表征. 结果显示, FHBPI的玻璃化转变温度为189 ℃, 在空气中5%的热失重温度为596 ℃, 表明具有良好的热稳定性; 旋转涂膜法制备的FHBPI薄膜具有良好的成膜性; 薄膜表面粗糙度为0.54 nm; FHBPI在光通信波段有较小的吸收损耗, 适合制备低损耗的光波导器件; 用FHBPI-50为波导芯层材料, FHBPI-30为包层材料, 设计制作的热光开关响应上升时间为267.9 μs, 下降时间为254.1 μs.     

Organic fluorine as a polypeptide building element: in vivo expression of fluorinated peptides, proteins and proteomes

Traditionally, the biological fluorination of complex biological systems like proteins is achieved through substitution of canonical amino acids or addition of fluorinated amino acids in the context of the standard genetic code. Ribosomal translation of monofluorinated amino acids into proteins often yields structures with minimal local changes in the interior but, on the same time, results in large global effects on characteristic features of the biopolymers (such as dramatically changed activity profile or folding stability). This is due to the novel and unique local interactions delivered by fluorine atoms such as (i) increase in the covalent radii (ii) changed polarities; (iii) changed hydrogen bond acceptor ability; (iv) altered water solubility as well as water ? organic solvent energy transfer. On the other hand, the biological incorporation of tri- or global fluorinated amino acids (such as trifluoroleucine, triflurovaline, and their hexafluoro counterparts, fluoromethionine and trifluoronorleucine etc.) represents still a challenge, as the natural structural scaffolds are optimized for hydrocarbon during evolution but not for fluorocarbon cores. Future work will be focused on the re-design of existing or de novo design of novel protein scaffolds capable of accommodating such building blocks into functional biologically active proteins and proteomes in the context of the viable cells.     

New ladder‐type conjugated polymer containing carbazole and fluorene units in backbone: Synthesis,optical, and electrochemistry properties

This article describes the synthesis and characterization of a new ladder‐type poly (p‐phenylene) (LPFC) containing alkylcarbazole and dialkylfluorene units in backbone, and its optical and electrochemical properties as well as its light‐emitting device performance. LPFC shows the well‐defined structure, high molecular weights, excellent thermal stability, and good solubility in common organic solvents. And it also shows strongly blue emission (λ_max = 465 nm) with quantum efficiency of 70% in solution, while its solid emission (λ_max = 470 nm) is almost the same as its solution. Electrochemical studies show that the highest occupied molecular orbital (HOMO) energy levels of LPFC is up to 5.29 eV, which is significantly higher than that of LPPP without carbazole in backbone, indicating an enhanced ability of hole injection from anodes. Furthermore, the single layer light‐emitting device using LPFC as the active layer shows blue emission (λ_max = 470 nm) with maximum luminescence of ～ 2000 cd/m² and maximum luminance efficiency of 0.43 cd/A. The attractive properties exhibited from new ladder‐type polymer establish LPFC as a good candidate for the potential application as transporting and emitting layer in polymeric light emitting diodes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3120–3127, 2008     

Alpha-helix formation in melittin and beta-lactoglobulin A induced by fluorinated dialcohols

Extensive study of the effect of fluorinated alcohols on protein conformations, notably the induction of alpha-helix formation, is important because of its wide range of applications. Circular dichroism (CD) was used to show that the enhancement of helix induction in beta-lactoglobulin A and melittin by the fluorinated diols 2,2,3,3-tetrafluoro-1,4-butanediol (TFBD), 2,2,3,3,4,4-hexafluoro-1,6-pentanediol (HFPD), and 2,2,3,3,4,4,5,5-octafluoro-1,6-hexanediol (OFHD) increases in the order TFBD < HFPD < OFHD. For fluorinated diols and monoalcohols the effectiveness of helix induction was found to increase exponentially with increasing number of fluorine atoms per alcohol molecule, and OFHD was found to be more effective than any previously reported fluorinated alcohol. Formation of standard micelles was ruled out as the cause of the enhanced helix induction by the fluorinated diols. The negligible red-edge excitation shift in the fluorescence of melittin indicated that the fluorinated diol/water solvent shell surrounding the tryptophan chromophore is less immobilized than are molecules in a lamellar vesicle.     

Antimicrobial activity and protease stability of peptides containing fluorinated amino acids

Selective fluorination of peptides results in increased chemical and thermal stability with simultaneously enhanced hydrophobicity. We demonstrate here that fluorinated derivatives of two host defense antimicrobial peptides, buforin and magainin, display moderately better protease stability while retaining, or exhibiting significantly increased bacteriostatic activity. Four fluorinated analogues in the buforin and two in the magainin series were prepared and analyzed for (1) their ability to resist hydrolytic cleavage by trypsin; (2) their antimicrobial activity against both gram-positive and gram-negative bacterial strains; and (3) their hemolytic activity. All but one fluorinated peptide (M2F5) showed retention, or significant enhancement, of antimicrobial activity. The peptides also showed modest increases in protease resistance, relative to the parent peptides. Only one of the six fluorinated peptides (BII1F2) was degraded by trypsin at a slightly faster rate than the parent peptide. Hemolytic activity of peptides in the buforin series was essentially null, while fluorinated magainin analogues displayed an increase in hemolysis compared to the parent peptides. These results suggest that fluorination may be an effective strategy to increase the stability of biologically active peptides where proteolytic degradation limits therapeutic value.     

Synthesis of fluorinated benzophenones, xanthones, acridones, and thioxanthones by iterative nucleophilic aromatic substitution

Fluorination of fluorophores can substantially enhance their photostability and improve spectroscopic properties. To facilitate access to fluorinated fluorophores, bis(2,4,5-trifluorophenyl)methanone was synthesized by treatment of 2,4,5-trifluorobenzaldehyde with a Grignard reagent derived from 1-bromo-2,4,5-trifluorobenzene, followed by oxidation of the resulting benzyl alcohol. This hexafluorobenzophenone was subjected to sequential nucleophilic aromatic substitution reactions, first at one or both of the more reactive 4,4'-fluorines, and second by cyclization through substitution of the less reactive 2,2'-fluorines, using a variety of oxygen, nitrogen, and sulfur nucleophiles, including hydroxide, methoxide, amines, and sulfide. This method yields symmetrical and asymmetrical fluorinated benzophenones, xanthones, acridones, and thioxanthones and provides scalable access to known and novel precursors to fluorinated analogues of fluorescein, rhodamine, and other derivatives. Spectroscopic studies revealed that several of these precursors are highly fluorescent, with tunable absorption and emission spectra, depending on the substituents. This approach should allow access to a wide variety of novel fluorinated fluorophores and related compounds.     

Behavior of 10-(perfluorohexyl)-decanol, a partially fluorinated analog of hexadecanol, at the air-water interface

10-(Perfluorohexyl)-decanol is a partially fluorinated analog of hexadecanol, an important detergent alcohol. With a melting point of T=48.82 °C and a melting enthalpy of ΔH=53.96 J/g, the intermolecular interactions of the fluorinated alcohol are weaker compared to hexadecanol (T=52.67 °C, ΔH=244.41 J/g). The behavior of this fluorinated alcohol at the air-water interface was studied on five different subphases, namely, water, NaCl (150 mM), CaCl₂ (2 mM), HCl (pH=2.0), and urea (0.5 M). Similar to other partially fluorinated amphiphiles, the compression isotherms of the fluorinated alcohol on all subphases are more expanded compared to the hydrocarbon alcohol with a limiting area of 32-36 Å² per molecule and a temperature-dependent phase transition at 5.6-8.2 mN/m (37 °C, compression rate of 10 mm/min). The dependence of the compression isotherms of 10-(perfluorohexyl)-decanol on subphase composition and temperature follows the trends reported for tetra- and hexadecanol. In particular, a shift to smaller molecular areas with increasing temperatures was observed on all five subphases. The shift to smaller molecular areas on urea indicates that in the case of 10-(perfluorohexyl)-decanol the effect is largely due to a loss of material from the air-water interface during compression of the monolayers. However, a squeezing-out of water molecules from the hydration sphere of the polar headgroup may still occur but can not be unambiguously proven.     

Systematic Studies on the Effect of Fluorine Atoms in Fluorinated Tolanes on Their Photophysical Properties

In this study, we synthesized a series of fluorinated and non-fluorinated tolanes, in which one or more fluorine atoms were systematically introduced into one aromatic ring of a tolane scaffold, and systematically evaluated their photophysical properties. All the tolanes with or without fluorine substituents were found to have poor photoluminescence (PL) in tetrahydrofuran (THF) solutions. On the other hand, in the crystalline state, non-fluorinated and fluorinated tolanes with one or four fluorine atoms were less emissive, whereas fluorinated tolanes with three or five fluorine atoms exhibited high PL efficiencies (Ф_PL) up to 0.51. X-ray crystallographic analyses of the emissive fluorinated tolanes revealed that the position of the fluorine substituent played a key role in achieving a high Ф_PL. Fluorine substituents at the ortho (2/6) and para (4) positions led to tight and rigid packing due to plural π–π stacking and/or hydrogen bonding interactions, resulting in enhanced Ф_PL caused by the suppression of non-radiative deactivation. Additionally, fluorinated tolanes with three fluorine atoms exhibited notable aggregation-induced PL emission enhancement in THF/water mixed solvents. This demonstrates that the PL characteristics of small PL materials can be tuned depending on the usage requirements.     

New mesogen with thermotropic cubic phase: 3,4,5‐tris‐(11,11,12,12,13,13,14,14,15,15,16,16,16‐tridecafluorohexadecyloxy)benzoic acid

A new mesogen, 3,4,5‐tris(11,11,12,12,13,13,14,14,15,15,16,16,16‐tridecafluoro‐hexadecyloxy)benzoic acid, with a thermotropic cubic phase was synthesized. The phase behaviour of the fluorinated compound and its corresponding non‐fluorinated analogue was investigated by differential scanning calorimetry, polarizing optical microscopy, and synchrotron small‐angle X‐ray diffraction. The fluorinated compound, which contains three partially perfluorinated alkoxy moieties and one carboxylic acid group capable of forming hydrogen bonding, exhibits a very interesting sequence of isotropic, cubic and hexagonal columnar phases, whereas its non‐fluorinated compound does not have a liquid crystalline phase. The cubic phase exists over a wide temperature range (from ～200°C to ～30°C on cooling) and is hence amenable to various physical measurements and potential applications. The ability to self‐assemble molecules into ordered superstructure via both partially perfluorinated chains and hydrogen bonding provides new insight for the development of novel liquid crystalline materials.     

Fluorinated Photovoltaic Materials for High‐Performance Organic Solar Cells

Over the past decade, organic solar cells (OSCs) have achieved a dramatic boost in their power conversion efficiencies from about 6 % to over 16 %. In addition to developments in device engineering, innovative photovoltaic materials, especially fluorinated donors and acceptors, have become the dominant factor for improved device performance. This minireview highlights fluorinated photovoltaic materials that enable efficient OSCs. Impressive OSCs have been obtained by developing some important molds of fluorinated donor and acceptor systems. The molecular design strategy and the matching principle of fluorinated donors and acceptors in OSCs are discussed. Finally, a concise summary and outlook are presented for advances in fluorinated materials to realize the practical application of OSCs.     

Synthesis and properties of new fluorinated ester,thioester, and amide substituted polythiophenes. Towards superhydrophobic surfaces

A series of new fluorinated polythiophenes has been synthesized by oxidative chemical and electrochemical polymerization and by Ullmann coupling. The substitution with the perfluoroalkyl alkyl chain CH₂CH₂C₆F₁₃ on the 3 position of the thiophene ring is performed via an ester, thioester, or amide connector, (CH₂)_m‐C(O)X, m = 0–2, with a view to investigating the role of the linker on the polymerization and on the properties of the corresponding polymers. The bromination of the monomers at the 2 and 5 positions allows the use of Ullmann coupling to form soluble fluorinated oligomers. The electron affinity was determined from cyclic voltammetry and a value of 3.1 eV was found for the ester derivative; such materials represent interesting candidates for use in light‐emitting devices or as an electron accepting material in photodiodes/solar cells. The oxidative polymerizations need the connector to be spaced out from the heterocycle to reduce its withdrawal effect. The ester, thioester, and amide spacer determined to a large extent the efficiency of the oxidative polymerization, and particularly the electropolymerization, as well as the solubility of the polymers formed. All the polymers were analyzed by GPC and by UV–visible and fluorescence spectroscopies. The electrochemical oxidation of the thioester and amide group prevents the formation of electroactive films by electropolymerization. But in the case of the ester group, the electroformed polymer exhibits exceptional stable superhydrophobic and lipophobic properties because of a porous surface and the presence of a fluorinated chain that confers low surface energy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4707–4719, 2007     

Relative free energies of binding to thymidylate synthase of 2- and/or 4-thio and/or 5-fluoro analogues of dUMP

Free energy perturbation calculations have been applied to evaluate the relative free energies of binding of 2'-deoxyuridine-5'-monophosphate (dUMP) and its 2- and/or 4-thio and/or 5-fluoro analogues to the wild-type E. coli thymidylate synthase (ecTS). The results accurately reproduce experimentally measured differences in the free energy of binding of dUMP versus 5-fluoro-dUMP to thymidylate synthase. They indicate that preferred binding of dUMP compared to 5-fluoro-dUMP in the binary complex is equally related to (i) more favorable electrostatic interactions of the dUMP molecule in the enzyme active site, and (ii) its less favorable solvation in the aqueous solution. The relative free energies of binding in the binary complex show moderate and qualitatively indistinguishable discrimination among the studied fluorinated and non-fluorinated 2- and/or 4-thio analogues of dUMP. The binding free energies of monothio analogues of dUMP and 5-fluoro-dUMP correspond quite well with experimentally measured activities of these nucleotides in the thymidylate synthase reaction. On the other hand, the binding free energies of both dithio analogues, 2,4-dithio-dUMP and 2,4-dithio-FdUMP, show lack of such correlation. The latter suggests that very low activities of the dithio analogues of dUMP and 5-fluoro-dUMP may relate more to the covalent reaction of these nucleotides within the ternary complex with TS and 5,10-methylenetetrahydrofolate, than to their pre-covalent binding. We speculate that a lack of substrate activity of 2,4-dithio-dUMP is related to the high aromaticity of its pyrimidine ring that prevents the Michael addition of the active site cysteine thiol to the pyrimidine C6 atom. A stronger affinity of the fluorinated analogues of dUMP to thymidylate synthase, compared to the non-fluorinated congeners, results from the fluorine substituent producing a local strain in the C6 region in the pyrimidine ring, thus sensitizing C6 to the Michael addition of the cysteine thiol.