Ab Initio calculation on BF3 and BCl3

Ab initio calculation are performed on the BF₃ and BCl₃ molecules, and the Koopmans' theorem ionization potentials are compared with the experimental ones obtained from photoelectron spectra.     

Reactivity of RCu,BF3 and R2CuLi,BF3 towards the ether linkage. Epoxides,acetals and orthoformates

The association of BF₃ to organocopper and cuprate reagents increases dramatically their reactivity towards epoxides. The same reagents cleave acetals to afford the product of substitution of one alkoxy group, whereas orthoformates lead to acetals under conditions where no further attack occurs.     

Syntheses, crystal structures and Raman spectra of Ba(BF4)(PF6), Ba(BF4)(AsF6) and Ba2(BF4)2(AsF6)(H3F4); the first examples of metal salts containing simultaneously tetrahedral BF4 and octahedral AF6 anions

In the system BaF₂/BF₃/PF₅/anhydrous hydrogen fluoride (aHF) a compound Ba(BF₄)(PF₆) was isolated and characterized by Raman spectroscopy and X-ray diffraction on the single crystal. Ba(BF₄)(PF₆) crystallizes in a hexagonal space group with a=10.2251(4) Å, c=6.1535(4) Å, V=557.17(5) Å³ at 200 K, and Z=3. Both crystallographically independent Ba atoms possess coordination polyhedra in the shape of tri-capped trigonal prisms, which include F atoms from BF₄⁻ and PF₆⁻ anions. In the analogous system with AsF₅ instead of PF₅ the compound Ba(BF₄)(AsF₆) was isolated and characterized. It crystallizes in an orthorhombic Pnma space group with a=10.415(2) Å, b=6.325(3) Å, c=11.8297(17) Å, V=779.3(4) Å³ at 200 K, and Z=4. The coordination around Ba atom is in the shape of slightly distorted tri-capped trigonal prism which includes five F atoms from AsF₆⁻ and four F atoms from BF₄⁻ anions. When the system BaF₂/BF₃/AsF₅/aHF is made basic with an extra addition of BaF₂, the compound Ba₂(BF₄)₂(AsF₆)(H₃F₄) was obtained. It crystallizes in a hexagonal P6₃/mmc space group with a=6.8709(9) Å, c=17.327(8) Å, V=708.4(4) Å³ at 200 K, and Z=2. The barium environment in the shape of tetra-capped distorted trigonal prism involves 10 F atoms from four BF₄⁻, three AsF₆⁻ and three H₃F₄⁻ anions. All F atoms, except the central atom in H₃F₄ moiety, act as μ₂-bridges yielding a complex 3-D structural network.     

Isotopic splitting in matrix isolated BF3

Small isotopic frequency shift information, if precisely determined, provides an effective constraint on intramolecular force fields. The most precise data for these frequency shift parameters Δν are derived from high resolution, gas-phase infrared spectral analyses. In the present study, we compare for BF₃ the isotopic frequency shift Δν₄ from a recently published gas-phase study with the value for Δν₄ that we obtain from the spectrum of matrix isolated BF₃. The excellent agreement between the two methods suggests further applications of the matrix technique for obtaining precise frequency shift data.     

Alkylation of toluene with 1,3-pentadiene catalyzed by [bupy]BF4-AlCl3 and [bupy]BF4-FeCl3 ionic liquids

A new application of ionic liquids is developed for a novel process of synthesizing pentyltoluene from toluene and a C5 diolefin (1,3-pentadiene). The catalyst [bupy]BF₄-AlCl₃ behaves better than [bupy]BF₄-FeCl₃.     

Enhanced O-dealkylation activity of SiCl4/LiI with catalytic amount of BF3

Dibenzyloxydihydrobenzoxathiin 1, which resisted debenzylation with SiCl₄/LiI, was effectively debenzylated with SiCl₄/LiI in the presence of a catalytic amount of BF₃. The HCl salt of the bis-debenzylated product 2 was isolated in 90% yield and 99% purity. This enhanced dealkylation activity has also been observed with other substrates.     

Isolierbare,o-verbrückte sulfinsäurefluorid/BF3-addukte ArS(F)O⋯BF3[1]

Interaction of gaseous BF₃ with the sulfinic acid fluorides 1a,b yields the O-bridged adducts ArS(F)?BF₃ 2a,b (a: Ar= Ph, b:Ar = p-F(C₆H₄)). Their structure is established by low temperature ¹³C {¹H}-NMR and their reactions. Compounds of type 2 are intermediates in Lewis-acid catalyzed aromatic sulfinylation.     

The harmonic force fields of BF3, SnCl4 SbBr3 obtained by the joint use of electron diffraction and vibrational spectroscopy data

The recently developed technique of joint analysis using electron diffraction and vibrational spectroscopy data for determining molecular force fields is demonstrated for the sample molecules BF₃ and SnCl₄. The technique is based on harmonic force constants being the common parameters in the interpretational methods of both components. The general harmonic force field of SbBr₃ is refined in this way using electron diffraction and recently available gas-phase spectroscopic frequencies of vibration.     

A study on the BF3 directed lithiation of 3-chloro- and 3-bromopyridine

The BF₃-directed lithiation of 3-chloro- and 3-bromopyridine (1a and 1b, respectively) has been investigated. The reactions of 3-chloro- or 3-bromopyridine–BF₃ adduct with LDA (1.3/1.1 equiv) followed by quenching with benzaldehyde or iodine exclusively gave the C-2 substituted products. However, when 2.2 equiv of LDA and dimethyl disulfide was used, a C-6 substituted product was obtained. Dilithiation of 1a and 1b has been studied with and without the involvement of BF₃ complexation. The role of Li?F(BF₃) interactions has been investigated by experimental and DFT calculations.     

RbAuUSe3, CsAuUSe3, RbAuUTe3, and CsAuUTe3: Syntheses and structure; magnetic properties of RbAuUSe3

The compounds RbAuUSe₃, CsAuUSe₃, and RbAuUTe₃ were synthesized at 1073 K from the reactions of U, Au, Q, and A₂Q₃ (A=Rb or Cs; Q=Se or Te). The compound CsAuUTe₃ was synthesized at 1173 K from the reaction of U, Au, Te, and CsCl as a flux. These isostructural compounds crystallize in the KCuZrS₃ structure type in space group Cmcm of the orthorhombic system. The structure consists of layers that contain nearly regular UQ₆ octahedra and distorted AuQ₄ tetrahedra. The infinite layers are separated by bicapped trigonal prismatic A cations. The magnetic behavior of RbAuUSe₃ deviates significantly from Curie–Weiss behavior at low temperatures. For T>200 K, the values of the Curie constant C and the Weiss constant θ_p are 1.82(9) emu K mol⁻¹ and −3.5(2)×10² K, respectively. The effective magnetic moment μ_eff is 3.81(9) μ_B. Formal oxidation states of A/Au/U/Q may be assigned as +1/+1/+4/−2, respectively.     

Luminescence properties of efficient X-ray phosphors of YBa3B9O18, LuBa3(BO3)3, α-YBa3(BO3)3 and LuBO3

The samples of YBa₃B₉O₁₈, LuBa₃(BO₃)₃, α-YBa₃(BO₃)₃ and LuBO₃ powders have been synthesized by the solid-state reaction methods at high temperature and their X-ray excited luminescent properties were investigated. All the studied materials show a broad emission band in the wavelength range of 300-550 nm with the peak centers at about 385 nm for YBa₃B₉O₁₈ and LuBa₃(BO₃)₃, 415 nm for α-YBa₃(BO₃)₃ and 360 nm for LuBO₃ powders, respectively. Even though those compounds have the different atomic structures, they have the common structural feature of each yttrium or lutetium ion bonded to six separate BO₃ groups, i.e., octahedral RE(BO₃)₆ (RE=Lu or Y) moiety. This octahedral RE(BO₃)₆(RE=Lu or Y) moiety seems to be an important structural element for efficient X-ray excited luminescence of those compounds, as are the edge-sharing octahedral TaO₆ chains for tantalate emission.     

High-pressure syntheses of TaS3, NbS3, TaSe3, and NbSe3 with NbSe3-type crystal structure

Transition metal trichalcogenides TaSe₃, TaS₃, NbSe₃ and NbS₃ were prepared under the reaction conditions of 2 GPa, 700°C, 30 min. NbSe₃ is exactly the same as that obtained in the usual sealed-tube method. The other products are modifications of each usual phase. They have crystal structures very similar to that of NbSe₃. The lattice parameters are a = 10.02Å, b = 3.48 Å, c = 15.56 Å, β = 109.6° for TaSe₃, a = 9.52 Å, b = 3.35 Å, c = 14.92 Å, β = 110.0° for TaS₃, and a = 9.68 Å, b = 3.37 Å, c = 14.83 Å, β = 109.9° for NbS₃. In spite of the similarity in their crystal structures, these high-pressure phases show a variety of electrical transport properties. TaSe₃ is a superconductor having T_c at 1.9 K. TaS₃ is a semiconductor with two transitions at 200 and 250 K. NbS₃ is a semiconductor with E_a = 180 MeV.     

Synthesis, crystal structures and photoluminescence properties of new oxyborates, Mg5NbO3(BO3)3 and Mg5TaO3(BO3)3, with novel warwickite-type superstructures

Single crystals of new oxyborates, Mg₅NbO₃(BO₃)₃ and Mg₅TaO₃(BO₃)₃, were prepared at 1370 °C in air using B₂O₃ as a flux. They were colorless and transparent with block shapes. X-ray diffraction analysis of the single crystals revealed Mg₅NbO₃(BO₃)₃ and Mg₅TaO₃(BO₃)₃ to be isostructural. The X-ray diffraction reflections were indexed to the orthorhombic Pnma (No. 62) system with a=9.3682(3) Å, b=9.4344(2) Å, c=9.3379(3) Å and Z=4 for Mg₅NbO₃(BO₃)₃ and a=9.3702(3) Å, b=9.4415(3) Å, c=9.3301(2) Å and Z=4 for Mg₅TaO₃(BO₃)₃. The crystal structures of Mg₅NbO₃(BO₃)₃ and Mg₅TaO₃(BO₃)₃ are novel warwickite-type superstructures having ordered arrangements of Mg and Nb/Ta atoms. Polycrystals of Mg₅NbO₃(BO₃)₃ prepared by solid state reaction at 1200 °C in air showed broad blue-to-green emission with a peak wavelength of 470 nm under 270 nm ultraviolet excitation at room temperature.     

Oxidation of aldimines to amides by m-CPBA and BF3·OEt2

Several amides were obtained in high yields by an efficient method from the corresponding imines which are readily prepared from aldehydes. This procedure involves the oxidation of aldimines with m-CPBA and BF₃·OEt₂. In this reaction, the product is strongly influenced by the electron releasing capacity of the aromatic substituent.     

Syntheses, crystal structures, and properties of three new metal selenites Na2Co2(SeO3)3, Na2Co1.67Ni0.33(SeO3)3, and Na2Ni2(SeO3)3

Three new sodium cobalt (nickel) selenite compounds, namely, Na₂Co₂(SeO₃)₃, Na₂Co_1.67Ni_0.33(SeO₃)₃, and Na₂Ni₂(SeO₃)₃ have been hydro-/solvothermally synthesized in the mixed solvents of acetonitrile and water. Single-crystal X-ray diffraction analyses reveal that these isostructural compounds belong to the orthorhombic Cmcm space group and their structures feature three-dimensional open frameworks constructed by the two-dimensional layers of [MSeO₃] pillared by the [SeO₃]²⁻ groups. The two different types of Na⁺ ions reside in the intersecting two-dimensional channels parallel to the a- and c-axes, respectively. Their thermal properties have been investigated via TGA-DSC. The magnetic measurements indicate the existence of the antiferromagnetic interactions in these compounds.     

Ionization gauge sensitivities of N2, O2, N2O, NO, NO2, NH3, CClF3 and CH3OH

A Bayard-Alpert (BA) gauge was used to determine apparent relative sensitivites S_rel,X for O₂, N₂O, NO, NO₂, NH₃, CClF₃ and CH₃OH from gauge calibration measurements in the range 1.3×10^–1 Pap1.3·10^–3Pa. Nitrogen was used as a calibration standard.     

Synthesis of 2-substituted quinones, vitamin K3, and vitamin K1 from p-cresol. BF3·OEt2-catalyzed methyl migration of 4-tert-butyldioxycyclohexadienones

BF₃·OEt₂-catalyzed methyl group migration of 4-methyl-4-tert-butyldioxycyclohexadienone, which is obtained by ruthenium-catalyzed oxidation of p-cresol with tert-butyl hydroperoxide, in hexafluoro-2-propanol/toluene gave toluquinone efficiently. The reaction can be applied to the regio-selective short-step syntheses of vitamin K₃ and vitamin K₁ from p-cresol.     

Syntheses, structures, and properties of Ag4(Mo2O5)(SeO4)2(SeO3) and Ag2(MoO3)3SeO3

Ag₄(Mo₂O₅)(SeO₄)₂(SeO₃) has been synthesized by reacting AgNO₃, MoO₃, and selenic acid under mild hydrothermal conditions. The structure of this compound consists of cis-MoO₂²⁺ molybdenyl units that are bridged to neighboring molybdenyl moieties by selenate anions and by a bridging oxo anion. These dimeric units are joined by selenite anions to yield zigzag one-dimensional chains that extended down the c-axis. Individual chains are polar with the C₂ distortion of the Mo(VI) octahedra aligning on one side of each chain. However, the overall structure is centrosymmetric because neighboring chains have opposite alignment of the C₂ distortion. Upon heating Ag₄(Mo₂O₅)(SeO₄)₂(SeO₃) looses SeO₂ in two distinct steps to yield Ag₂MoO₄. Crystallographic data: (193 K; MoKα, λ=0.71073 Å): orthorhombic, space group Pbcm, a=5.6557(3), b=15.8904(7), c=15.7938(7) Å, V=1419.41(12), Z=4, R(F)=2.72% for 121 parameters with 1829 reflections with I>2σ(I). Ag₂(MoO₃)₃SeO₃ was synthesized by reacting AgNO₃ with MoO₃, SeO₂, and HF under hydrothermal conditions. The structure of Ag₂(MoO₃)₃SeO₃ consists of three crystallographically unique Mo(VI) centers that are in 2+2+2 coordination environments with two long, two intermediate, and two short bonds. These MoO₆ units are connected to form a molybdenyl ribbon that extends along the c-axis. These ribbons are further connected together through tridentate selenite anions to form two-dimensional layers in the [bc] plane. Crystallographic data: (193 K; MoKα, λ=0.71073 Å): monoclinic, space group P2₁/n, a=7.7034(5), b=11.1485(8), c=12.7500(9) Å, β=105.018(1) V=1002.7(2), Z=4, R(F)=3.45% for 164 parameters with 2454 reflections with I>2σ(I). Ag₂(MoO₃)₃SeO₃ decomposes to Ag₂Mo₃O₁₀ on heating above 550 °C.     

Thermal decomposition of organo-bielemental vanadium compounds Cp2V(ER3) (ER3 - GeEt3, SnEt3, CH2SiMe3 SeGeEt3)

The thermal decompositon of a number of organo-bielemental vanadium compounds with the general formula Cp₂V(ER₃) (ER₃ - GeEt₃, SnEt₃, CH₂SiMe₃, SeGeEt₃) has been investigated in solids and in solution. The main decomposition products of Cp₂V(SnEt₃) are vanadocene and hexaethyldistannane. Et₃GeH, Et₃GeCp, Cp₂V and CpV(C₅H₄GeEt₃) are formed from Cp₂V (GeET₃) decomposition. Isolated CpV(C₅H₄GeEt₃) is characterized by IR and mass spectra. The decomposition of Cp₂V(CH₂SiMe₃) is accompanied by Me₄Si, Cp₂V and CpV-(C₅H₄CH₂SiMe₃) formation, the latter is identified from the mass spectrum. Triethylgermane, vanadocene, and a diselenide of vanadium are isolated on decomposition of Cp₂V(SeGeEt₃). Based upon the experimental data, mechanisms for the decompositon are proposed.     

Neutron powder diffraction and magnetic measurements on RbTil3, RbVI3, and CsVI3

CsVI₃ (a = 8.124(1) c = 6.774(1)Å,Z = 2, P6₃/mmc at 293 K) adopts the BaNiO₃ structure. Three-dimensional magnetic ordering takes place atT_c = 32(1)K. At 1.2 K the magnetic moment is 1.64(5) μ_B and it forms a 120° spin structure in the basal plane. RbVI₃ (a = 13.863(2) c = 6.807(1) Å,Z = 6, P6₃cmor P3¯c1 at 293 K) and RbTiI₃ (a = 14.024(3) Å,c = 6.796(2) Å,Z = 6, P6₃cm orP3¯c1 at 293 K) adopt a distorted BaNiO₃ structure, probably isostructural with KNiCl₃.T_c of RbVI₃ is 25(1) K. At 1.2 K, RbVI₃ has a spin structure similar to the one of CsVI₃ with a magnetic moment of 1.44(6) μ_B. RbTiI₃ shows no magnetic ordering at 4.2 K. It is shown that a deviation from the 120° structure is expected for compounds with a distorted BaNiO₃ structure such as RbVI₃. The cell dimensions of CsTiI₃ are reported.