Bestimmung von Chrom in menschlichem Serum und Plasma mit der flammenlosen Atomabsorptions-Spektrophotometrie

Zusammenfassung Die bis heute in der Literatur mitgeteilten Werte für Chrom im Serum nüchterner gesunder Probanden unterscheiden sich um Größenordnungen. Die in der vorliegenden Arbeit mitgeteilten Untersuchungen betreffen die analytische Problematik der Chrombestimmung mit Hilfe der flammenlosen Atomabsorptions-Spektrometrie, wobei aufgezeigt wird, daß diese Methodik für die Chrombestimmung in biologischem Material ohne großen statistischen Aufwand zu keiner sicheren Beurteilbarkeit und Interpretierbarkeit der gemessenen Werte führt. Mit Hilfe synthetischer Chromkomplexverbindungen werden die Probleme der Standardaddition zur Chrombestimmung untersucht. Unter Berücksichtigung der Blindwerte und der daraus resultierenden Nachweisgrenze sowie Garantiegrenze für Reinheit, wurde Chrom in einem Standardreferenzmaterial (1569 Brewers yeast [U. S. National Bureau of Standards]) im Rahmen eines Ringversuchs zur Chromanalyse sowie im Serum und Plasma von 41 Probanden bestimmt. Für das Referenzmaterial wurde ein Wert von 45±4 mol/kg (2,3±0,2 g/g) ermittelt. Der Referenzwert betrug 41±1 mol/kg (2,12±0,05 g/g). Im Serum wird eine lognormale Verteilung der Chromkonzentration mit den zentralen Parametern ±_M=132,2 nmol/l (0,72,2 g/l) ermittelt. Im Plasma lagen die Werte zwischen 20 und 30 nmol/l (1–1,5 g/l). Aufschluß, Durchführung der Bestimmung sowie die biologische Bedeutung und Interpretation des Parameters Chrom im Serum und Plasma werden eingehend diskutiert.

---

Determination of chromium in human serum and plasma by flame-less atomic-absorption spectrophotometry

Summary Concentrations of Cr in serum of overnight fasting volunteers differ over a wide range in the literature. The investigations of the analytical problems of Cr determination by flameless atomic absorption spectrometry underline the necessity of statistical methods for the interpretation of the measurements of Cr in biological matrices. With nine different synthetic chromium complexes the method of standard addition was investigated. Considering the blank values, the limit of detection and the limit of guarantee for purity, Cr was determined in the standard reference material 1569 brewers yeast (National Bureau of Standards) with 45±4 Mol · kg^–1 (2.3±0.2g·g^–1), compared with the reference data 41±1 Mol·kg^–1 (2.12±0.05 g±g^–1). In serumuuuuu we found a lognormal distribution with the central parameters 132.2 nMol ·1^–1 (0.72.2 g·1^–1). In plasma the values were in the range between 20 and 30 nMol·1^–1 (1–1.5 g·1^–1). The ashing process and the determination are demonstrated and discussed in detail.

     

Determination of nitrogen in uranium and uranium-oxide by high-temperature gas-extraction

Summary The reducing fusion gas extraction method has been used for the determination of nitrogen in uranium metal and uranium dioxide reference materials at levels of about 10–15g·g^–1. It has been found that when extracting at temperatures above 2700° C the use of a platinum flux is no longer necessary. Pure nitrogen and nitrogen-helium mixtures were used for calibrating the detection unit in the range of 1.5–670 g. The calibration of the extraction was performed with metallic reference materials in the range of 8–331 g N₂ content.

---

Bestimmung von Stickstoff in Uran und Uranoxid durch Hochtemperatur-Gasextraktion

Zusammenfassung Die Gasextraktion aus reduzierender Schmelze wurde zur Stickstoffbestimmung in Uranmetall- und Urandioxid-Referenzmaterialien bei Gehalten von 10–15 g·g^–1 angewendet. Bei Temperaturen über 2700° C ist kein Platinbad mehr erforderlich. Zur Eichung der Detektionseinheit im Bereich von 1,5–670 g wurden reiner Stickstoff oder Stickstoff-Helium-Mischungen benutzt. Zur Eichung der Extraktion wurden metallische Referenzmaterialien mit (8–331g) N₂ eingesetzt.

     

Transition State Geometry and a Polar Effect in the Reactions of Peroxy Radicals with Oxygen-Containing Compounds

The reactions of structurally different peroxy radicals with the C–H bonds of oxygen-containing compounds (ketones, aldehydes, ethers, and esters) were analyzed in terms of a parabolic model. The enthalpies of these reactions and the activation energies of equienthalpic reactions of peroxy radicals with hydrocarbons were calculated, and the contribution of the polar interaction E to the activation energy was evaluated. The geometry parameters of the transition state were calculated with the use of an algorithm developed based on quantum-chemical calculations in combination with the intersecting parabolas method. It was found that the polar interaction resulted in a change in the configuration of the C···H···O reaction center in the transition state from linear to angular. A different angle (C···H···O) from 180° appeared in this case. The following linear correlation between E (kJ/mol) and cos (180° – ) was obeyed: cos (180° – ) = 1 + 6.76 × 10^–3E .     

Chemical composition of T-21 silica tubing and implications for neutron activation analysis

T-21 silica, a commonly used encapsulation material in neutron activation analysis of small samples, was analyzed by INAA to determine trace levels of the following impurities: Na, Sc, Cr, Fe, Co, Ni, Zn, Br, Sb, La, Ce, Sm, Tb, Hf and Au. In the unprocessed form supplied by the manufacturer, pieces of T-21 weighing 50 mg contain 6·10^–2 g Na; 9·10^–3 g Fe; 3·10^–7–7·10^–6 g light REE, Sc and Hf and 4·10^–8 g Tb and Au. In a series of glass-blowing steps, in which unfiltered gases were used for fuel, and cleaning steps, in which reagent grade aqua regia was used, irradiation vials were produced which contain higher average levels of Sc, La, Sm, Tb and Hf, by factors ranging from 1.3 for Sm to 11.5 for La, and lower average levels of Co, Na and Fe, by factors of 1.4, 2.0 and 4.0, respectively, than the unprocessed material. These contamination levels lead to blank corrections of 21% for La, 2.6% for Ce and 3.0% for Hf in 40 g samples of refractory inclusions from carbonaceous chondrites, if counted in their irradiation vials.     

Method comparison study on soot-selective techniques

In a long-term field study at two locations with different air pollution levels several soot-selective measurement techniques were compared with a thermochemical method which measures non-extractable carbon (NEC) detecting the evolved CO₂ by means of coulometric titration. The attenuation measurement technique (aethalometer) and the aerosol photoemission method showed good correlations to NEC for concentrations ranging from 1.6g/m³ to 40.8g/m³. The specific mass absorption coefficient of black carbon with respect to NEC varied between 8.4m²/g and 13.7m²/g with respect to the measurement sites, but the value was found to remain constant at each site independent of seasonal or meteorological variations. The ratio of photoelectric signal to NEC varied between 16 fA·(g/m³)^–1 and 33 fA·(g/m³)^–1 depending on the age of the aerosol. The diurnal variations of that ratio showed strong similarities to the traffic patterns. Additionally a slight temperature dependence of this ratio was found for the aged aerosol with a proportionality factor of – 0.35 fA·(K·g/m³)^–1. With the reflectance measurement technique (smoke shade method) reliable NEC determination was not possible for NEC concentrations 5 g/m³.     

Nuclear interferences of uranium and thorium in a reactor neutron activation analysis determination of cerium using the radionuclides141Ce and143Ce

The interference contributions of uranium and thorium to the determination of cerium based on radionuclides¹⁴¹Ce and¹⁴³Ce produced by irradiation in a reactor core was determined. The values of the interference contributions for¹⁴¹Ce were 0.28±0.01 g Ce/g U and /2.01±0.05/x10^–3 g Ce/g Th, and for¹⁴³Ce 1.33±0.03 g Ce/g U and /9.0±0.2/x10^–3 g Ce/g Th.     

Determination of trace metals in sea waters of the Albanian coast by energy-dispersive X-ray fluorescence

Preconcentration of trace transition and heavy metal ions by precipitation with APDC has been combined with energy-dispersive X-ray fluorescence for environmental sea water analysis. The preconcentration procedure implies adding of 500 g Mo ion and 10 ml of 1% water solution of APDC to a 500 ml water sample at pH 4, filtering off on a Millipore filter and analyzing after drying. Realistic detection limits are at 1 g·l^–1 level and precision varies between 10–25% at about 5 g·l^–1 level, depending on the element. Eleven sea water samples, covering Albanian Adriatic and Ionian coast, are analyzed for trace metal ions.     

Photometrische Bestimmung von Bor in hochreinen Chemikalien

Zusammenfassung Bor reagiert in Form des Tetrafluoroboratkomplexes mit dem basischen Farbstoff Methylenblau unter Bildung eines mit 1,2-Dichlorethan extrahierbaren Ionenassoziatkomplexes. Die optimalen Bedingungen für die photometrische Bestimmung von Mikromengen Bor werden ermittelt und das vorgestellte Verfahren hinsichtlich Empfindlichkeit, Genauigkeit und kleinster bestimmbarer Menge charakterisiert.Die Borbestimmung ist im Bereich von 0,25–2,5 g Bor mit einer relativen Standardabweichung von 3,8% für 1,0 g Bor möglich. Der molare Extinktionskoeffizient beträgt ₆₆₅=8,2·10⁴1·mol^–1·cm^–1, die Nachweisgrenze nach Kaiser 0,125 g Bor.Das Verfahren wurde zur Bestimmung von 10^–6 bis 10^–5% Bor in folgenden hochreinen Chemikalien eingesetzt: Methanol, Ethanol, Isopropanol, Aceton, Mineralsäuren, Essigsäure, Ammoniak und Wasserstoffperoxid.

---

Photometric determination of boron in high-purity chemicals

Summary Boron reacts with fluoride to form borofluoride which itself reacts with the basic dye methylene blue forming a complex which can be extracted into 1,2-dichloroethane. Optimum conditions were established for the determination of microamounts of boron by an extraction-photometric method. The procedure presented has been characterized with regard to sensitivity, precision and detection limit.Boron can be determined within a range from 0.25 to 2.5 g with a relative standard deviation s _rel=3.8% for 1 g B. The absorptivity is ₆₆₅=8.2·10⁴1·mol^–1·cm^–1, the detection limit according to Kaiser was found to be 0.125 g B.The procedure was used to analyse high-purity chemicals (10^–6–10^–5% B) such as organic solvents, mineral acids, acetic acid, ammonia, hydrogen peroxide etc.

     

Thorium in man and environment uptake and clearance

The intake and tissue distribution of thorium (^{2 3 2}Th) was studied in an urban (Bombay) population in India. From the analysis of 16 whole diet samples, the average daily intake through food was found to be 2 g (range 0.8–4.3 g·d^–1). The estimated intake through drinking water and inhalation comes out to be 0.03 and 0.02 g per day. From the analysis of human autopsy tissue samples it is observed that the concentration ranges in lungs and bone are 1.5–16 g/kg and 0.2–9.0 g/kg fresh weight respectively. The average urinary concentration is 12 ng/1 (range 7–22 ng/l for 10 samples). Among the different body tissues, pulmonary lymph nodes were found to contain the highest concentration (geometric mean 53.4 g/kg, range 31.4–85.5 g/kg for 6 samples). Analysis of the samples was done by the neutron activation technique. 311.8 keV gamma photons of^{2 3 3}Pa which is the activation product of^{2 3 2}Th, were counted after chemical separation. A 54 cm³ intrinsic Ge detector coupled to 1024-channel analyser was used. Using the average lung content and the daily average intake values of thorium through inhalation, the clearance half-time from lung was estimated.     

Application of l-cysteine-capped nano-ZnS as a fluorescence probe for the determination of proteins

Nanometer-sized l-cysteine-capped ZnS particles have been synthesized and used as a fluorescence probe to investigate the effect of proteins on fluorescent intensity. With =190 nm, maximum and constant synchronous fluorescence enhancement was produced at 267 nm and pH 5.12 in the presence of proteins. A highly sensitive synchronous fluorescence method for the rapid determination of proteins has been developed. Under optimum conditions, calibration graphs are linear over the range 0.03–8.0 g mL^–1 for bovine serum albumin (BSA), 0.01–6.0 g mL^–1 for human serum albumin (HSA), 0.05–8.0 g mL^–1 for -globulin (-G), and 0.04–4.0 g mL^–1 for ovalbumin, respectively. The relative standard deviations of seven replicate measurements were 1.75% for 1.0 g mL^–1 BSA, 1.90% for 1.0 g mL^–1 HSA, 1.65% for 1.0 g mL^–1 -G, and 2.32% for 1.0 g mL^–1 ovalbumin.     

Trace element analysis of some shaving powders commonly marketed in Nigeria using instrumental neutron activation analysis

Instrumental neutron activation analysis (INAA) technique has been employed viak ₀ approximation method to determine elemental composition of five shaving powders commonly marketed in Nigeria. Fe displayed the highest concentrations in the range 1000–2000 g·g^–1. Na and Zn concentrations were established in the range 200–400 g·g^–1. Heavy elements like Ga, La, Cr, Co, Ag, Ce and Nd concentrations were noted in the lower range of 1–10 g·g^–1 Br, As, Sb, Sm, Eu, W, Cs, Tb, Yb, Hf, Ta, Th and U concentrations were established in even lower traces in the <1 g·g^–1 range. Results obtained for a certified reference material, CANMET BL-1 and CERT (in house) Kaolin standard compared favourably with the literature values thus establishing the results presented for the shaving powders.     

Synthesis,structures, and properties of the niobium and tantalum telluride cubane clusters [M4(μ4-O)(μ3-Te)4(CN)12]6– (M = Nb or Ta)

The new cubane cluster complex K₆[Ta₄(₄-O)(₃-Te)₄(CN)₁₂]·KOH·4H₂O was prepared from a mixture of TaTe₄ and KCN by the high-temperature synthesis followed by crystallization from aqueous solutions. The compound was characterized by cyclic voltammetry, X-ray diffraction analysis, and IR, Raman, and electronic spectroscopy. A comparative study of the clusters [M₄(₄-O)(₃-Te)(CN)₁₂]^6– (M = Nb or Ta) containing the ₄-O ligands was carried out. These clusters are the first molecular chalcogenide cubane complexes of Group V metals.     

Fällungsanalyse im Mikrogrammbereich: Eine neue Methode

Zusammenfassung Eine neue Methode zur Durchführung gravimetrischer Bestimmungen im Mikrogrammbereich wurde beschrieben; diese beruht im wesentlichen darauf, daß der Niederschlag nicht mehr zusammen mit dem Filter, sondern nach Überführen mit einem geeigneten Lösungsmittel in einem separaten Wägegefäß gewogen wird.Die dazu nötigen Geräte und deren Herstellung wurden beschrieben. Nach dieser Methode wurden folgende Bestimmungen mit zufriedenstellender Richtigkeit durchgeführt: 2,5–25g Al, 5–50g Cu und 5–50g Zn mit Oxin, 2,5–25g Fe(III) und 2,5–25g Ti(IV) mit N-Benzoyl-phenylhydroxylamin, 5–50g Ni und 5–50g Cu mit Salicylaldoxim, 2,5–50g Co(II) und 2,5–50g Fe(III) mit -Nitroso--naphthol sowie 5–50g Chlorid als Silberchlorid.

---

Precipitation analysis in the microgram-scale: A new method

Summary A new method for gravimetric determinations in the microgram-scale is described. This method is based on the fact that the precipitate is not weighed together with the filter but is transferred to a separate weighingvessel using a suitable solvent. The necessary simple devices and their use are described. The following determinations were carried out with satisfying accuracy: 2,5–25g Al, 5–50g Cu and 5–50g Zn with Oxine, 2,5–25g Fe and 2,5–25g Ti withN-benzoylphenylhydroxylamine, 5–50g Ni and 5–50g Cu with salicylaldoxime, 2,52–50g Co and 2,5–50g Fe with -nitroso--naphthol and 5–50g chloride as silver chloride.

     

Crystallization Behavior of Alkoxy-Derived Cordierite Gels

Alkoxy-derived cordierite gels were synthesized from tetraethylorthosilicate (TEOS), aluminum isopropoxide (Al(OPr ⁱ )₃), and magnesium ethoxide (Mg(OEt)₂). TEOS was partially hydrolyzed at molar ratios H₂O/TEOS = 1.2, in the presence of hydrochloric acid as a catalyst, HCl/TEOS = 0.1. Aluminum and magnesium alkoxides were added successively or as a double alkoxide. Phase transformations occurring in the gel were studied by differential thermal analysis, x-ray diffractometry, and Fourier-transform infrared spectroscopy. In all cases, -cordierite crystallized at similar temperatures (950–1000°C) with small amounts of spinel, which confirms dominant influence of the optimal conditions for partial hydrolysis of TEOS on the gels homogeneity. The transformation of - into -cordierite began at about 1100°C. Broadening of diffraction peaks and appearance of new bands in the FT IR spectra confirmed the transformation of - into modulated -cordierite at temperatures above 1300°C. Differential thermal analysis under nonisothermal conditions also proved homogeneous nucleation with constant rate and three-dimensional crystallite growth during -cordierite crystallization. The overall activation energy of the crystallization of -cordierite is 580 ± 81 kJ/mol.     

Extraction-spectrophotometric determination of nickel as Ni-(PAR)2-(CTAB)2 complex in polymetallic sea-bed nodules and steels

A red, water-soluble complex of nickel with PAR can be extracted into chloroform with CTAB at pH 7.0. The system obeys Beer's law upto 0.5 g/ml with a molar absorptivity of 45 200 L·mol^–1·cm^–1 at 540 nm. Job's method of continuous variations revealed that the composition of the extracting species is 1:2:2 for nickel:PAR:CTAB. Based on this extraction, a highly sensitive and selective spectrophotometric method for the determination of nickel in polymetallic sea-bed nodules and in steels, after prior separation of iron and manganese, was developed. The standard deviation was 0.04–0.127 g for 5–25 g of nickel.     

Examination of the flow behaviour of HEC and hmHEC solutions using structure–property relationships and rheo-optical methods

The effect of solely intermolecular interactions due to hydrophobic alkyl substituents on the flow behaviour of hmHEC solutions was determined via comparison of the structure–property relationships of hmHECs and HECs based on the overlap parameter c[]. For this purpose the ₀–[]–c relationship for HEC was determined to be ₀=8.91·10^–4+8.91·10^–4·c[]+1.07·10^–3(c[])²+1.83·10^–7(c[])^5.56. In addition the structure–property relationship for the longest relaxation time via the –[]–c relationship ·c^1+1/a=2.65·10^–8(c[])²+4.25·10^–8(c[])³+5.44·10^–12(c[])^5.27 has been determined. Although the hmHECs had a higher zero shear viscosity than HECs of comparable overlap parameters at a range of 1<c[]<13, the flow curves could be described via the same –[]–c relationship in that range, indicating a timescale of the intermolecular interactions below the longest relaxation time.The behaviour of the supramolecular structures in solution with an applied shear field was characterized by rheo-optical analysis of the shear thickening behaviour which occurs with addition of surfactant. Contrary to expectations, a slope >1 of the flow birefringence n as a function of shear rate could be observed in double logarithmic plotting. The degree of orientation of the flow birefringence primarily decreases with increasing shear rate, but increases later on at a characteristic shear rate. These two exceptional phenomena can be explained by a pronounced anisotropy of the polymer coils caused by the dilatant flow.This assumption is backed up by the occurrence of a maximum in the dichroism curves which is caused by a finite stability of the aggregated structures in solution. On a molecular basis, these observations agree with the theoretically predicted (Witten and Cohen) transition from intra- to intermolecular polymer micelles. The detected aggregates correspond with the polymer chains that are aligned in one micelle.Abbreviations a Exponent of the Mark–Houwink relationship - c_[]* Critical concentration (determined by intrinsic viscosity) - c_LS* Critical concentration (determined by light scattering) - HASE Hydrophobically modified alkali-swellable emulsions - HEUR Hydrophobically modified ethoxylated urethanes - hmHEC Hydrophobically modified hydroxyethylcellulose - HEC Hydroxyethylcellulose - HPMC Hydroxypropylmethylcellulose - M Molecular mass - MS Molar degree of substitution - n Slope of the flow curve - SEC Size exclusion chromatography - R_G Radius of gyration - Viscosity - ₀ Zero-shear viscosity - _sp Specific viscosity - Longest relaxation time - n Birefringence - n_i Intrinsic birefringence - n_f Form birefringence - n Dichroism - Orientation of the birefringence - ̇ Shear rate     

Determination of tetraethyllead and tetramethyllead using high performance liquid chromatography and electrochemical detection

Summary A new method for the separation of tetramethyllead (TML) and tetraethyllead (TEL) was developed using high-performance liquid chromatography. The electrochemical detection was examined with different electrodes. Amperometric and pulse-amperometric techniques were investigated and the optimal working potential for each electrode was determined. Linearity for the glassy carbon electrode was observed between 350 ng and 30 g; the detection limit is 310 ng (TML) resp. 340 ng (TEL). In case of the mercury gold electrode the linearity range was 300 g–3 g and the detection limit 1.5 m (TML) resp. 1.7 g (TEL).     

Capillary rise of liquids in rectangular tubings

The capillary rise of liquids was investigated in square capillary tubings of different dimensions (e. g. 300 m · 300 m to 1000 m · 1000 m) in the temperature range 25° to 35°C.The data were fitted to an equation:=1/2 · ·g · (S · (C ·H/2 +C ·S)) where is the surface tension of the liquid,S is the side length of the square tubing,H is the capillary rise,C (= 1.089) is a capillary constant.