Bifunctional sensor of nitric oxide and oxygen based on hematite nanotubes embedded in chitosan matrix

A novel hybrid bifunctional sensing platform for simultaneous determination of NO and O₂ has been developed, whereby hematite nanotubes are immobilized into the chitosan matrix onto a gold electrode (labeled as HeNTs-Chi/Au). The HeNTs distributed in porous-structured chitosan matrix not only offer abundant active sites for bifunctional sensing of NO and O₂, but also facilitate oxidation of NO and reduction of O₂ dramatically. Straight calibration curves are achieved in analyte concentration ranges of 5.0 × 10⁻⁸ to 1.25 × 10⁻⁶ mol L⁻¹ for NO and 2.5 × 10⁻⁷ to 6.0 × 10⁻⁶ mol L⁻¹ for O₂. Also, the detection limits are low of 8.0 × 10⁻⁹ mol L⁻¹ for NO and 5.0 × 10⁻⁸ mol L⁻¹ for O₂. Such an efficient bifunctional sensor for NO and O₂ offers great potential in quantitation of NO levels in biological and medical systems, since NO level is highly regulated by various reactive oxygen species.     

An electropolymerized Nile Blue sensing film-based nitrite sensor and application in food analysis

This paper reports a poly-Nile Blue (PNB) sensing film based electrochemical sensor and the application in food analysis as a possible alternative for electrochemical detection of nitrite. The PNB-modified electrode in the sensor was prepared by in situ electropolymerization of Nile Blue at a prepolarized glassy carbon (GC) electrode and then characterized by cyclic voltammetry (CV) and pulse voltammetry in phosphate buffer (pH 7.1). Several key operational parameters affecting the electrochemical response of PNB sensing film were examined and optimized, such as polarization time, PNB film thickness and electrolyte pH values. As the electroactive PNB sensing film provides plenty of active sites for anodic oxidation of nitrite, the nitrite sensor exhibited high performance including high sensitivity, low detection limit, simple operation and good stability at the optimized conditions. The nitrite sensor revealed good linear behavior in the concentration range from 5.0 × 10⁻⁷ mol L⁻¹ to 1.0 × 10⁻⁴ mol L⁻¹ for the quantitative analysis of nitrite anion with a limit of detection of 1.0 × 10⁻⁷ mol L⁻¹. Finally, the application in food analysis using sausage as testing samples was investigated and the results were consistent with those obtained by standard spectrophotometric method.     

Simultaneous determination of hydroquinone and catechol at PASA/MWNTs composite film modified glassy carbon electrode

A poly-amidosulfonic acid and multi-wall carbon nanotubes composite (PASA/MWNTs) modified electrode has been constructed by electropolymerization on glassy carbon electrode (GCE). The electrochemical behaviors of hydroquinone (HQ) and catechol (CC) were investigated using cyclic and differential pulse voltammetries (DPVs) at the prepared electrode. Separation of the reductive peak potentials for HQ and CC was about 120 mV in pH 6.0 phosphate buffer solution (PBS), which makes it suitable for simultaneous determination of these compounds. In the presence of 1.0 × 10⁻⁴ mol L⁻¹ isomer, the reductive peak currents of DPV are proportional to the concentration of HQ in the range of 6.0 × 10⁻⁶ to 4.0 × 10⁻⁴ mol L⁻¹, and to that of CC in the range of 6.0 × 10⁻⁶ to 7.0 × 10⁻⁴ mol L⁻¹. When simultaneously changing the concentration of both HQ and CC, the linear concentration range of HQ (or CC) is 6.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹ (or 6.0 × 10⁻⁶ to 1.8 × 10⁻⁴ mol L⁻¹), and the corresponding detection limits are 1.0 × 10⁻⁶ mol L⁻¹. The proposed method has been applied to simultaneous determination of HQ and catechol in water sample, and the results are satisfactory.     

Novel lipoate-selective membrane sensor for the flow injection determination of alpha-lipoic acid in pharmaceutical preparations and urine

A potentiometric lipoate-selective sensor based on mercuric lipoate ion-pair as a membrane carrier is reported. The electrode was prepared by coating the membrane solution containing PVC, plasticizer, and carrier on the surface of graphite electrode. Influences of the membrane composition, pH, and possible interfering anions were investigated on the response properties of the electrode. The sensor exhibits significantly enhanced response toward lipoate ions over the concentration range 1 × 10⁻⁷ mol L⁻¹ to 1 × 10⁻² mol L⁻¹ with a lower detection limit of (LDL) of 9 × 10⁻⁸ mol L⁻¹ and a slope of −29.4 mV decade⁻¹, with S.D. of the slope is 0.214 mV. Fast and stable response, good reproducibility, long-term stability, applicability over a pH range of 8.0–9.5 is demonstrated. The sensor has a response time of ≤12 s and can be used for at least 6 weeks without any considerable divergence in its potential response. The proposed electrode shows good discrimination of lipoate from several inorganic and organic anions. The CGE was used in flow injection potentiometry (FIP) and resulted in well defined peaks for lipoate ions with stable baseline, excellent reproducibility and reasonable sampling rate of 30 injections per hour. The proposed sensor has been applied for the direct and FI potentiometric determination of LA in pharmaceutical preparations and urine; and has been also utilized as an indicator electrode for the potentiometric titration of LA.     

Voltammetric determination of hypoxanthine based on the enhancement effect of mesoporous TiO2-modified electrode

A mesoporous TiO₂ was synthesized according to the reported method, and then used to modify the carbon paste electrode (CPE). The electrochemical behavior of hypoxanthine was investigated with great detail. Compared with the unmodified CPE, the mesoporous TiO₂-modified CPE greatly enhances the oxidation signal of hypoxanthine. Due to huge surface area, well-defined and special mesopores, the mesoporous TiO₂-modified CPE shows considerable enhancement effect toward hypoxanthine. Based on this, a sensitive, rapid and convenient electrochemical method was developed for the determination of hypoxanthine. The linear range is over the range from 2.0 × 10⁻⁷ to 5.0 × 10⁻⁵ mol L⁻¹, and the limit of detection is estimated to be 5.0 × 10⁻⁸ mol L⁻¹. The relative standard deviation (RSD) for 10 mesoporous TiO₂-modified CPEs is 5.7%. Finally, this sensing method was successfully used to determine hypoxanthine in human blood serum samples.     

Electrochemical behavior and voltammetric determination of tryptophan based on 4-aminobenzoic acid polymer film modified glassy carbon electrode

Herein, a novel electrochemical method was developed for the determination of tryptophan based on the poly(4-aminobenzoic acid) film modified glassy carbon electrode (GCE). The electrochemical behaviors of tryptophan at the modified electrode were investigated. It was found that the oxidation peak current of tryptophan at the modified GCE was greatly improved compared with that at the bare GCE. The effects of supporting electrolyte, pH value, scan rate, accumulation potential and time were examined. The oxidation peak current of tryptophan was proportional to its concentration over the range from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹. The limit of detection was evaluated to be 2.0 × 10⁻⁷ mol L⁻¹. The proposed method was sensitive and simple. It was successfully employed to determine tryptophan in pharmaceutical samples.     

Luminescent CuS nanotubes as silver ion probes

CuS nanotubes (NTs) made up of nanoparticles were successfully prepared in large quantities in an O/W microemulsion system under low temperature. Based on the characteristics of synchronous fluorescence spectroscopy (SFS), a new method with high sensitivity and selectivity was developed for rapid determination of silver ion with functional copper sulphide (CuS) nanotubes as a fluorescence probe. Under optimal conditions, functional copper sulphide displayed a calibration response for silver ion over a wide concentration range from 1.0 × 10⁻¹⁰ to 1.0 × 10⁻⁸ mol L⁻¹. The limit of detection was 0.5 × 10⁻¹⁰ mol L⁻¹ and the relative standard deviation of eight replicate measurements for the highest concentration (1 × 10⁻⁸ mol L⁻¹) was 3%. Compared with several fluorescence methods, the proposed method had a wider linear range and improved the sensitivity. Furthermore, the concentration dependence of the synchronous fluorescence intensity is effectively described by a Langmuir-type binding isotherm.     

A novel poly(taurine) modified glassy carbon electrode for the simultaneous determination of epinephrine and dopamine

A novel taurine modified glassy carbon electrode was prepared by electropolymerization method. The electrochemical behaviors of epinephrine (EP) and dopamine (DA) at the modified electrode were studied by cyclic voltammetry. The modified electrode exhibited enhanced sensitivity and excellent electrochemical discrimination to DA and EP. The cathodic peaks of the two species were well-separated with a potential difference of about 390 mV, so the poly(taurine) modified electrode was used for simultaneous voltammetric measurement of EP and DA by differential pulse voltammetry. Under the optimum conditions, the cathodic peak currents were linear to concentrations of EP and DA in the range of 2.0 × 10⁻⁶ to 6.0 × 10⁻⁴ mol L⁻¹ and 1.0 × 10⁻⁶ to 8.0 × 10⁻⁴ mol L⁻¹, respectively. The detection limits for EP and DA were 3.0 × 10⁻⁷ and 1.0 × 10⁻⁷ mol L⁻¹, respectively. Because the oxidation of ascorbic acid (AA) is an irreversible reaction at modified electrode, the interference of AA for determining EP and DA was eliminated. The modified electrode has been satisfactorily used for the simultaneous determination of EP and DA in pharmaceutical injections.     

Studies on the kinetics of ascorbate oxidation at a ruthenium oxide hexacyanoferrate modified electrode towards the detection at microenvironments

The electrocatalytic oxidation of ascorbate on a ruthenium oxide hexacyanoferrate (RuOHCF) glassy carbon (GC) modified electrode was investigated at pH 6.9 by using rotating disc electrode (RDE) voltammetry. The influence of the systematic variation of rotation rate, film thickness, ascorbate concentration and the electrode potential indicated that the rate of cross-chemical reaction between Ru(III) centres immobilized into the film and ascorbate controls the overall process. The kinetic regime may be classified as a Sk″ mechanism and the second order rate constant for the surface electrocatalytic reaction was found to be 1.56 × 10⁻³ mol⁻¹ L¹ s⁻¹ cm. A carbon fibre microelectrode modified with the RuOHCF film was successfully used as an amperometric sensor to monitor the ascorbate diffusion in a simulated microenvironment experiment.     

Surface-enhanced oxidation and detection of Sunset Yellow and Tartrazine using multi-walled carbon nanotubes film-modified electrode

The insoluble multi-walled carbon nanotubes (MWNT) was successfully dispersed into water in the presence of hydrophobic surfactant. After that, MWNT film-coated glassy carbon electrode (GCE) was achieved via dip-coating and evaporating water. Owing to huge surface area, high sorption capacity and subtle electronic properties, MWNT film exhibits highly efficient accumulation efficiency as well as considerable surface enhancement effects to Sunset Yellow and Tartrazine. As a result, the oxidation peak currents of Sunset Yellow and Tartrazine remarkably increase at the MWNT film-modified GCE. Based on this, a novel electrochemical method was developed for the simultaneous determination of Sunset Yellow and Tartrazine. The limits of detection are 10.0 ng mL⁻¹ (2.2 × 10⁻⁸ mol L⁻¹) and 0.1 μg mL⁻¹ (1.88 × 10⁻⁷ mol L⁻¹) for Sunset Yellow and Tartrazine. Finally, the proposed method was successfully used to detect Sunset Yellow and Tartrazine in soft drinks.     

Non-extraction flow injection determination of cationic surfactants using eriochrome black-T

A new, rapid, sensitive, non-extraction batch, and flow injection spectrophotometric method for the determination of cationic surfactants (CSs) such as cetyltrimethyl ammonium bromide (CTAB), tetra-n-butyl ammonium chloride (TBAC) and cetylpyridinium chloride (CPC) is proposed. The method is based on the interaction of cationic surfactants with eriochrome black-T to form an ion-association complex. This complex has strong absorbance at 708 nm. The effects of chemical parameters and FIA variables on the determination of cationic surfactants were studied in detail, especially for CTAB. Under optimum conditions, the two linear calibration ranges of the method are 3.0 × 10⁻⁶ to 5.0 × 10⁻³ mol L⁻¹ CTAB, CPB and DTAB for the batch spectrophotometric method and 2.0 × 10⁻⁶ to 2.0 × 10⁻⁴ mol L⁻¹ CTAB, CPB and TBC for the flow injection spectrophotometric method. The sample throughput was 35 ± 5 samples h⁻¹ at room temperature. The relative standard deviations for 10 replicates of analysis of (2.0, 0.6 and 0.2) × 10⁻⁴ mol L⁻¹ CTAB were 1.2, 1.3, and 0.8%, respectively. In addition, the influence of potential interfering substances on the determination of cationic surfactants was studied. The proposed method is simple and rapid, using no toxic organic solvents. It was applied to the determination of trace CS in industrial wastewater with satisfactory results.     

Enhanced sensitivity for Cu(II) by a salicylidine-functionalized polysiloxane carbon paste electrode

A new approach for decreasing the detection limit for a copper(II) ion-selective electrode (ISE) is presented. The ISE is designed using salicylidine-functionalized polysiloxane in carbon paste. This work describes the attempts to develop the electrode and measurements of its characteristics. The new type of renewable three-dimensional chemically modified electrode could be used in a pH range of 2.3–5.4, and its detection limit is 2.7 × 10⁻⁸ mol L⁻¹ (1.2 μg L⁻¹). This sensor exhibits a good Nernstian slope of 29.4 ± 0.5 mV/decade in a wide linear concentration range of 2.3 × 10⁻⁷ to 1.0 × 10⁻³ mol L⁻¹ of Cu(II). It has a short response time (8 s) and noticeably high selectivity over other Cu(II) selective electrodes. Finally, it was satisfactorily used as an indicator electrode in complexometric titration with EDTA and determination of copper(II) in miscellaneous samples such as urine and various water samples.     

TNT determination based on its degradation by immobilized HRP with electrochemical sensor

Based on the mechanism of 2,4,6-Trinitrotoluene (TNT) degradation, an amperometric hydrogen peroxide biosensor was constructed for the determination of trace amounts of TNT by immobilization of MWCNTs, HRP and Nafion onto the surface of glassy carbon electrode (GCE). The Nafion/MWCNTs/HRP biosensor was capable of degrading TNT with the consumption of H₂O₂ and HRP in 0.2 mol/L PBS (pH 7.0). Trace TNT was quantitative analyzed by the current decrease of H₂O₂ at the reductive potential of −0.35 V using cyclic voltammetry (CV). Effect of the ratio of MWCNTs/HRP, initial concentration of H₂O₂ and electrolyte’s pH were also optimized by CV. Under the optimal conditions, the current decrease of H₂O₂ that was consumed by TNT degradation was proportional to TNT ranging from 8.8 × 10⁻⁹ mol/L to 2.64 × 10⁻⁷ mol/L with a detection limit of 3.0 × 10⁻⁹ mol/L (S/N = 3). It developed a new way for simple, rapid and sensitive measurement of trace TNT.     

EPR and optical absorption studies of Cr ions in d-gluconic acid monohydrate

EPR studies are carried out on Cr³⁺ ions doped in d-gluconic acid monohydrate (C₆H₁₂O₇·H₂O) single crystals at 77 K. From the observed EPR spectra, the spin Hamiltonian parameters g, |D| and |E| are measured to be 1.9919, 349 (×10⁻⁴) cm⁻¹ and 113 (×10⁻⁴) cm⁻¹, respectively. The optical absorption of the crystal is also studied at room temperature. From the observed band positions, the cubic crystal field splitting parameter Dq (2052 cm⁻¹) and the Racah interelectronic repulsion parameter B (653 cm⁻¹) are evaluated. From the correlation of EPR and optical data the nature of bonding of Cr³⁺ ion with its ligands is discussed.     

Electroanalysis of myoglobin and hemoglobin with a boron-doped diamond electrode

The electrochemical behavior of myoglobin (Mb) and hemoglobin (Hb) was investigated with a boron-doped diamond (BDD) electrode by cyclic voltammetry. In acetate buffer solutions, the oxygen reduction at the BDD electrode showed a very high overpotential while the reduction of Mb or Hb was observed in the more positive potential region. Owing to the electrocatalytic reaction of O₂ and the participation of H⁺ following the electrochemical reduction of ferric proteins, the voltammetric responses for Mb and Hb on the BDD electrode in the negative going scans became remarkable in acidic buffer solutions in air. The peak current was linearly proportional to the concentration of Mb in the range 1×10⁻⁶–2×10⁻⁵ M or the concentration of Hb from 1×10⁻⁶ to 1×10⁻⁵ M.     

A hydrogen peroxide biosensor based on direct electrochemistry of hemoglobin in palladium nanoparticles/graphene-chitosan nanocomposite film

Thermally two-dimensional lattice graphene (GR) and biocompatibility chitosan (CS) act as a suitable support for the deposition of palladium nanoparticles (PdNPs). A novel hydrogen peroxide (H₂O₂) biosensor based on immobilization of hemoglobin (Hb) in thin film of CS containing GR and PdNPs was developed. The surface morphologies of a set of representative membranes were characterized by means of scanning electron microscopy and showed that the PdNPs are of a sphere shape and an average diameter of 50 nm. Under the optimal conditions, the immobilized Hb showed fast and excellent electrocatalytic activity to H₂O₂ with a small Michaelis–Menten constant of 16 μmol L⁻¹, a linear range from 2.0 × 10⁻⁶ to 1.1 × 10⁻³ mol L⁻¹, and a detection limit of 6.6 × 10⁻⁷ mol L⁻¹. The biosensor also exhibited other advantages, good reproducibility, and long-term stability, and PdNPs/GR–CS nanocomposites film would be a promising material in the preparation of third generation biosensor.     

Design of fluorescent self-assembled multilayers and interfacial sensing for organophosphorus pesticides

This paper details the fabrication of indole (ID) self-assembled multilayers (SAMs) and fluorescence interfacial sensing for organophosphorus (OP) pesticides. Quartz/APES/AuNP/l-Cys/ID film was constructed on l-cysteine modified Quartz/APES/AuNP surface via electrostatic attraction between ID and l-cysteine. Cyclic voltammetry indicates that ID is immobilized successfully on the gold surface. Fluorescence of the Quartz/APES/AuNP/l-Cys/ID film shows sensitive response toward OPs. The fluorescent sensing conditions of the SAMs are optimized that allow linear fluorescence response for methylparathion and monocrotophos over 5.97 × 10⁻⁷ to 3.51 × 10⁻⁶ g L⁻¹ and 3.98 × 10⁻⁶ to 3.47 × 10⁻⁵ g L⁻¹, with detection limit of 6.1 × 10⁻⁸ gL⁻¹ and 3.28 × 10⁻⁶ gL⁻¹, respectively. Compared to bulk phase detection, interfacial fluorescence sensing based on the SAMs technology shows higher sensitivity by at least 2 order of magnitude.     

Pulse radiolysis study of ion-species effects on the solvated electron in alkylammonium ionic liquids

The spectra and kinetic behavior of solvated electrons (e_sol⁻) in alkyl ammonium ionic liquids (ILs), i.e. N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide (DEMMA-TFSI), N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium tetrafluoroborate (DEMMA-BF₄), N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)imide (TMPA-TFSI), N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13-TFSI), N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P13-TFSI), and N-methyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P14-TFSI) were investigated by the pulse radiolysis method. The e_sol⁻ in each of the ammonium ILs has an absorption peak at 1100 nm, with molar absorption coefficients of 1.5–2.3×10⁴ dm³ mol⁻¹ cm⁻¹. The e_sol⁻ decayed by first order with a rate constant of 1.4–6.4×10⁶ s⁻¹. The reaction rate constant of the solvated electron with pyrene (Py) was 1.5–3.5×10⁸ dm³ mol⁻¹ s⁻¹ in the various ILs. These values were about one order of magnitude higher than the diffusion-controlled limits calculated from measured viscosities. The radiolytic yields (G-value) of the e_sol⁻ were 0.8–1.7×10⁻⁷ mol J⁻¹. The formation rate constant of e_sol⁻ in DEMMA-TFSI was 3.9×10¹⁰ s⁻¹. The dry electron (e_dry⁻) in DEMMA-TFSI reacts with Py with a rate constant of 7.9×10¹¹ dm³ mol⁻¹ s⁻¹, three orders of magnitude higher than that of the e_sol⁻ reactions. The G-value of the e_sol⁻ in the picosecond time region is 1.2×10⁻⁷ mol J⁻¹. The capture of e_dry⁻ by scavengers was found to be very fast in ILs.     

Oxidative degradation of non-ionic surfactant (TritonX-100) by chromium(VI)

Degradation of polyoxyethylene chain of non-ionic surfactant (TritonX-100) by chromium(VI) has been studied spectrophotometrically under different experimental conditions. The reaction rate bears a first-order dependence on the [Cr(VI)] under pseudo-first-order conditions, [TritonX-100]  [Cr(VI)] in presence of 1.16 mol dm⁻³ perchloric acid. The observed rate constant (k_obs) was 3.3 × 10⁻⁴ to 3.5 × 10⁻⁴ s⁻¹ and the half-life (t_1/2) was 33–35 min for chromium(VI). The effects of total [TritonX-100] and [H⁺] on the reaction rate were determined. Reducing nature of non-ionic TritonX-100 surfactant is found to be due to the presence of –OH group in the polyoxyethylene chain. It was observed that monomeric and non-ionic micelles of TritonX-100 were oxidized by chromium(VI). When [TritonX-100] was less than its critical micelle concentration (cmc) the k_obs values increased from 0.76 × 10⁻⁴ to 1.5 × 10⁻⁴ s⁻¹. As the [TritonX-100] was greater than the cmc, the k_obs values increases from 2.1 × 10⁻⁴ to 8.2 × 10⁻⁴ s⁻¹ in presence of constant [HClO₄] (1.16 mol dm⁻³) at 40 °C. A comparison was made of the oxidative degradation rates of TritonX-100 with different metal ion oxidants. The order of the effectiveness of different oxidants was as follows: permanganate > diperiodatoargentate(III) > chromium(VI) > cerium(IV).     

Effect of pH and temperature on degradation of dilute dihydroxybenzene, in aqueous titanium dioxide suspension irradiated by UV light

The degradation of p-dihydroxybenzene in a batch photocatalytic reactor, irradiated by a high intensity UV lamp, was investigated. In this experimental work, commercial anatase titanium dioxide (degussa P 25) was used as a catalyst. Various operating conditions such as initial concentration, pH of the solution, temperature, addition of H₂O₂, bubbling of oxygen, and catalyst loading were examined. A pseudo-first-order kinetics was observed with a rate constant ranging between 17.1 × 10⁻³ and 5.6 × 10⁻³ min⁻¹ which was decreasing with increasing initial concentration. H₂O₂ enhanced the degradation significantly. For the experimental conditions, there was no significant effect for the added catalyst dosage. The degradation rate of p-dihydroxybenzene increased to a certain amount with increasing temperature then decreased. Further experimentation is needed to verify this observation.