The importance of ion size and electrode curvature on electrical double layers in ionic liquids

Room-temperature ionic liquids (ILs) are an emerging class of electrolytes for supercapacitors. We investigate the effects of ion size and electrode curvature on the electrical double layers (EDLs) in two ILs 1-butyl-3-methylimidazolium chloride [BMIM][Cl] and 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF(6)], using a combination of molecular dynamics (MD) and quantum density functional theory (DFT) simulations. The sizes of the counter-ion and co-ion affect the ion distribution and orientational structure of EDLs. The EDL capacitances near both planar and cylindrical electrodes were found to follow the order: [BMIM][Cl] (near the positive electrode) > [BMIM][PF(6)] (near the positive electrode) ≈ [BMIM][Cl] (near the negative electrode) ≈ [BMIM][PF(6)] (near the negative electrode). The EDL capacitance was also found to increase as the electrode curvature increases. These capacitance data can be fit to the Helmholtz model and the recently proposed exohedral electrical double-cylinder capacitor (xEDCC) model when the EDL thickness is properly parameterized, even though key features of the EDLs in ILs are not accounted for in these models. To remedy the shortcomings of existing models, we propose a "Multiple Ion Layers with Overscreening" (MILO) model for the EDLs in ILs that takes into account two critical features of such EDLs, i.e., alternating layering of counter-ions and co-ions and charge overscreening. The capacitance computed from the MILO model agrees well with the MD prediction. Although some input parameters of the MILO model must be obtained from MD simulations, the MILO model may provide a new framework for understanding many important aspects of EDLs in ILs (e.g., the variation of EDL capacitance with the electrode potential) that are difficult to interpret using classical EDL models and experiments.     

A new force field model of 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid and acetonitrile mixtures

Recently, we introduced a new force field (FF) to simulate transport properties of imidazolium-based room-temperature ionic liquids (RTILs) using a solid physical background. In the present work, we apply this FF to derive thermodynamic, structure, and transport properties of the mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF(4)], and acetonitrile (ACN) over the whole composition range. Three approaches to derive a force field are formulated based on different treatments of the ion-ion and ion-molecule Coulomb interactions: unit-charge, scaled-charge and floating-charge approaches. The simulation results are justified with the help of experimental data on specific density and shear viscosity for these mixtures. We find that a phenomenological account (particularly, a simple scaled-charge model) of electronic polarization leads to the best-performing model. Remarkably, its validity does not depend on the molar fraction of [BMIM][BF(4)] in the mixture. The derived FF is so far the first molecular model which is able to simulate all transport properties of the mixtures, comprising RTIL and ACN, fully realistically.     

Enhanced refolding of lysozyme with imidazolium-based room temperature ionic liquids: Effect of hydrophobicity and sulfur residue

The expression of recombinant proteins in microorganism frequently leads to the formation of insoluble aggregates, inclusion bodies (IBs). Thus, the additional in vitro protein refolding process is required to convert inactive IBs into water-soluble active proteins. This study investigated the effect of sulfur residue and hydrophobicity of imidazolium-based room temperature ionic liquids (RTILs) on the refolding of lysozyme as a model protein in the batch dilution method which is the most commonly used refolding method. When lysozyme was refolded in the refolding buffer containing [BF4]-based RTILs with a systematic variety of alkyl chain on cations varying from two to eight, less hydrophobic imidazolium cations having shorter alkyl chains were effective to facilitate lysozyme refolding. Compared to the conventional refolding buffer, 2 times higher lysozyme refolding yield was obtained in 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]) containing refolding buffer. The refolding yield of lysozyme was even more increased by 2.5 times when 1-butyl-3-methylimidazolium methylsulfate ([BMIM][MS]) containing sulfur residue on anion was used. The sulfur residue in [BMIM][MS] is supposed to improve the refolding yield of lysozyme which has 4 intramolecular disulfide bonds. For dilution-based refolding of lysozyme, the optimum concentrations of RTILs in refolding buffer were found to be 1.0 M [EMIM][BF4] and 0.5 M [BMIM][MS], respectively. The optimum temperate for dilution-based refolding of lysozyme with RTILs was 4 °C.     

Headspace Single Drop Microextraction Using Micellar Ionic Liquid Extraction Solvents

A headspace single drop microextraction (SDME) method using extraction solvents comprised of micellar ionic liquids (ILs) was used to perform the extraction of 17 aromatic compounds from aqueous solution and coupled with liquid chromatography. The effects of various experimental parameters including type of micellar IL extraction solvent, stir rate, extraction time, volume of the microdroplet, and addition of organic solvent were investigated and optimized. Two different micellar solutions were formed by dissolving 1-decyl-3-methylimidazolium bromide ([DMIM][Br]) and sodium dodecyl sulfate (SDS) in 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). It was observed that the enrichment factors of the 17 studied compounds were all enhanced with the micellar ionic liquid extraction solvent compared to the neat [BMIM][Cl] IL. The highest sensitivity was obtained with the [BMIM][Cl]–[DMIM][Br] micellar solution for polycyclic aromatic hydrocarbons (PAHs) with high molecular weight and fused rings while the [BMIM][Cl]–SDS micellar solution was proven to be more sensitive for smaller, more polar molecules. The detection limits were lower when utilizing the [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] extraction solvents compared to the neat [BMIM][Cl] extraction solvent. The reproducibility of the extraction method at 20 °C using extraction solvents composed of [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] ranged from 6.7 to 14.0 and 4.2 to 14.7%, respectively.     

Application of novel room temperature ionic liquids in flexible supercapacitors

This paper studied application of different types of room temperature ionic liquids (RTILs) into flexible supercapacitors. Typical RTILs including 1-buthyl-3-methyl-imidazolium [BMIM][Cl], trioctylmethylammonium bis(trifluoromethylsulfonyl)imide [OMA][TFSI] and triethylsulfonium bis(trifluoromethylsulfonyl)imide ([SET₃][TFSI]) were studied. [SET₃][TFSI] shows the best result as electrolyte in electrochemical double-layer (EDLC) supercapacitors with very high specific capacitance of 244 F/g at room temperature, overceiling the performance of conventional carbonate electrolyte such as dimethyl carbonate (DMC) with more stable performance and much larger electrochemical window.     

Structure and interaction between the [BMIM][Ala] alanine anion and the 1-butyl-3-methylimidazolium cation in ion pairs

The equilibrium geometries and vibrational frequencies of the ionic liquid 1-butyl-3-methylimidazolium cation and the alanine anion [BMIM][Ala] are studied using density functional theory (DFT) at the B3PW91/6-311+G(d,p) leve1. The most stable structures of the anion, the cation, and the ion pairs are obtained and characterized, and the geometry parameters of the ion pairs confirm the presence of a hydrogen bonding interaction between the anion and the cation. Natural bond orbital (NBO) analysis is also performed to analyze the atomic charge distribution and charge transfer in the [BMIM]⁺ cation and [BMIM][Ala] ionic liquids. The results show that there are the electrostatic interaction and multiple hydrogen bond interactions between the cation and the anion of the ionic liquids, and the stability of the ground state of the ion pairs mostly results from the hydrogen bonding between the lone pairs of O atoms in the anion and H in the imidazole cycle of the cation. There are some changes in microstructures and the charge distribution during the formation of the ion pairs.     

Dynamics of solvent and rotational relaxation of coumarin-153 in room-temperature ionic liquid 1-butyl-3-methyl imidazolium tetrafluoroborate confined in poly(oxyethylene glycol) ethers containing micelles

We have investigated solvent and rotational relaxation of coumarin 153 (C-153) in room-temperature ionic liquid (RTILs) 1-butyl-3-methyl-imidazolium tetrafluoroborate ([bmim][BF(4)]) and the ionic liquid confined in alkyl poly(oxyethylene glycol) ethers containing micelles. We have used octaethylene glycol monotetradecyl ether (C(14)E(8)) and octaethylene glycol monododecyl ether (C(12)E(8)) as surfactants. In the [bmim][BF(4)]-C(14)E(8) micelle, we have observed only a 22% increase in solvation time compared to neat [bmim][BF(4)], whereas in the [bmim][BF(4)]-C(12)E(8) system, we have observed approximately 57% increase in average solvation time due to micelle formation. However, the slowing down in solvation time on going from neat RTIL to RTIL-confined micelles is much smaller compared to that on going from water to water confined micellar aggregates. The 22-57% increase in solvation time is attributed to the slowing down of collective motions of cations and anions in micelles. The rotational relaxation times become faster in both the micelles compare to neat [bmim][BF(4)].     

Structures of ionic liquids with different anions studied by infrared vibration spectroscopy

We investigated the structures of ionic liquids (1-butyl-3-methylimidazolium iodide [BMIM][I] and 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4]) and their aqueous mixtures using attenuated total reflection (ATR) infrared absorption and Raman spectroscopy. The ATR spectrum in the CHx (x = 1, 2, 3) vibration region from 2800 to 3200 cm-1 was very different between [BMIM][BF4] and [BMIM][I] even though all the spectral features in this region were from the butyl chain and the imidazolium ring of the same cation. The spectrum did not change appreciably irrespective of the water concentration for [BMIM][BF4], whereas the spectrum from [BMIM][I] showed significant changes as the water concentration was increased, especially in CH-vibration modes from the imidazolium ring. For very diluted solutions both aqueous mixtures of [BMIM][I] and [BMIM][BF4] showed very similar spectra. Mixing of [BMIM][I] with heavy water (D2O) facilitated the isotopic exchange of the proton attached to the most acidic carbon of the imidazolium ring into deuterium from D2O, whereas even prolonged exposure to D2O did not induce any isotopic exchange for [BMIM][BF4]. Raman spectra around 600 cm(-1) indicative of the butyl chain conformation also changed differently as the water concentration was increased between [BMIM][I] and [BMIM][BF4]. These differences are considered to come from the variation in the position of the anion, where I- is expected to be closer to the C(2) hydrogen of the imidazolium cation and interacting more specifically as compared to BF(4-).     

哌啶氧铵盐对醇氧化反应的活性和选择性

系统地研究了12种具有不同4-位取代基(R=H、CH~3O、Cl)及反离子(X=Cl、BF~4、ClO~4、Br或Br~3)的2, 2, 6, 6-四甲基哌啶氧铵盐对醇的氧化反应, 发现这些氧铵盐都能以很高的由率将一级醇氧化为醛, 二级醇氧化为酮。氧化反应的活性与4-位取代基及反离子有关。当反离子相同时, 反应活性的顺序为Cl>CH~3O>H;当4-位取代基相同时, 反应活性的顺序为Cl^-》BF~4^->ClO~4^->Br^-。氧化反应的选择性主要与反离子有关, 当反离子为Cl^-时, 主要氧化一级醇; 当反离子为BF~4^-、ClO~4^-、Br^-或Br~3^-时, 主要氧化二级醇。     

Morphology of poly(ethylene oxide) dissolved in a room temperature ionic liquid: a small angle neutron scattering study

Solutions of deuterated poly(ethylene oxide) (d-PEO) in 1-butyl-3-methyl imidazolium tetrafluoroborate ([bmim][BF4]), a prototype room-temperature ionic liquid (RTIL), have been studied at room temperature over a range of polymer concentrations, using small angle neutron scattering (SANS), characterizing the conformation of PEO dissolved in RTILs. [bmim][BF4] behaves as a good solvent for d-PEO, which organizes in this solvent in non entangled random coils. These findings will help in optimizing the designing of microemulsions in these potentially environmentally friendly solvents.     

Effect of Cosolvent on Bulk and Interfacial Characteristics of Imidazolium Based Room Temperature Ionic Liquids

Here we report a systematic study on electrical conductivity and surface tension of various concentrated solutions of imidazolium based room temperature ionic liquids (RTILs), viz. 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][ $\hbox {PF}_{6}$ ]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][ $\hbox {BF}_{4}$ ]) in the cosolvents methanol and acetonitrile at 298.15 K. The aim of the investigations was to explore the impact of cosolvents on bulk and interfacial characteristics of imidazolium based RTILs. It was observed that both methanol and acetonitrile mix non-ideally with and enhance the transport parameters of the imidazolium based RTILs. An interesting outcome of the presented work is that the investigated RTILs retain their inherent structural characteristics up to a high dilution limit with cosolvent, and this limit is higher in acetonitrile than in methanol as cosolvent. The findings establish that, in comparison to methanol, acetonitrile is a better cosolvent that can be used for enhancing the transport parameters of imidazolium based RTILs for electrochemical and other applications. The results are explained in light of structure-composition-property relations and ion-ion and ion-cosolvent interactions.     

Can the absence of solvation of neutral reagents by ionic liquids be responsible for the high reactivity in base-assisted intramolecular nucleophilic substitutions in these solvents?

[reaction: see text] The kinetics of the rearrangement of the Z-phenylhydrazone of 3-benzoyl-5-phenyl-1,2,4-oxadiazole (1a) into the relevant 4-benzoylamino-2,5-diphenyl-1,2,3-triazole (2a) induced by amines have been studied in two room-temperature ionic liquids (IL-1, [BMIM][BF4] and IL-2, [BMIM][PF6]). The data collected show that the reaction occurs faster in ionic liquids than in other conventional solvents previously studied (both polar or apolar, protic or aprotic). Presumably, this could depend on their peculiar ability to minimize the strong substrate-solvent, amine-solvent and amine-amine interactions occurring in conventional solvents.     

Halo- and azidodediazoniation of arenediazonium tetrafluoroborates with trimethylsilyl halides and trimethylsilyl azide and sandmeyer-type bromodediazoniation with Cu(I)Br in [BMIM][PF6] ionic liquid

Reaction of [ArN(2)][BF(4)] salts immobilized in [BMIM][PF(6)] ionic liquid (IL) with TMSX (X = I, Br) and TMSN(3) represents an efficient method for the preparation of iodo-, bromo-, and azido-derivatives via dediazoniation. The reactions can also be effected starting with ArNH(2) by in situ diazotization with [NO][BF(4)] followed by reaction with TMSX or TMSN(3). Depending on the substituents on the benzenediazonium cation, competing fluorodediazoniation (ArF formation) and hydrodediazoniation (ArH formation) were observed. Dediazoniation with TMSN(3) and with TMSI generally gave the highest chemoselectivity toward ArN(3) and ArI formation. The IL was recycled and reused up to 5 times with no appreciable decrease in the conversions. Multinuclear NMR monitoring of the interaction of [ArN(2)][BF(4)]/TMSX, [BMIM][PF6]/TMSX, and [BMIM][PF(6)]/TMSX/[ArN(2)][BF(4)] indicated that TMSF is formed primarily via [ArN(2)][BF(4)]/TMSX, generating [ArN(2)][X] in situ, which gives ArX on dediazoniation. Competing formation of ArF in Sandmeyer-type bromodediazoniation of [ArN(2)][BF(4)] with Cu(I)Br immobilized in the IL points to significant involvement of heterolytic dediazoniation.     

Sum frequency generation study of the room-temperature ionic liquids/quartz interface

The purpose of this investigation is to study the ionic liquid/quartz interface with sum frequency generation vibrational spectroscopy (SFG). SFG spectroscopy was chosen for this study because of its unique ability to yield vibrational spectra of molecules at an interface. Different polarization combinations are used, which probe different susceptibilities, giving SFG the ability to determine molecular orientation at the interface. The ionic liquids used were 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF(4)], and 1-butyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF(6)]. To determine the influence of the molecular structure and charge on orientation at the interface, neutral, 1-methylimidazole, and 1-butylimidazole were also studied. Raman spectra and depolarization ratios were obtained for neat samples of 1-methylimidazole, 1-butylimidazole, and 1-butyl-3-methylimidazolium tetrafluoroborate recorded from 2700 to 3300 cm(-1). SFG spectra of the 1-methylimidazole/quartz interface showed both methyl and aromatic C-H vibrations. Orientation calculations determined that the ring of the molecule is tilted 45-68 degrees from normal, with the methyl group oriented 32-35 degrees from normal. The SFG spectra of 1-butylimidazole contain several resonances from the alkyl chain with only one weak resonance from the aromatic ring. Orientation calculations suggest that the ring is lying in the plane of the surface with the methyl group pointing 43-47 degrees from normal. The orientation of the [BMIM][PF(6)] ionic liquid was sensitive to trace amounts of water and had to be evacuated to <3 x 10(-5) Torr for the water to be removed. SFG spectra of both ionic liquids were similar, displaying resonances from the alkyl chain as well as the aromatic ring. Orientation analysis suggests the aromatic ring was tilted 45-90 degrees from normal for [BMIM][BF(4)], while the ring for [BMIM][PF(6)] was tilted 38-58 degrees from normal. This suggests the orientation of the molecule is influenced by the size of the anion.     

Dynamically coated silica monolith with ionic liquids for capillary electrochromatography

An ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) was introduced as dynamic coating of a silica monolithic column for capillary electrochromatography of phenols and nucleoside monophosphates. The run-to-run and column-to-column repeatability of migration time for six phenols were satisfactory on this column with relative standard deviation values less than 0.90 and 4.31%, respectively. Anodic electroosmotic flow (EOF) was observed, which increased with the increase of [BMIM][BF4] concentration within 120 mM and when [BMIM][BF4] concentration was above 120 mM, EOF leveled off due to the saturation of [BMIM][BF4] on the monolith. Efficient separation of phenols and nucleoside monophosphates on this dynamically coated monolithic column was obtained, compared with a dynamically coated fused-silica column and unmodified silica monolithic column. The retention behavior of uncharged phenols is mainly manipulated by hydrophobic interactions due to the presence of butyl groups, and that of nucleoside monophosphates is governed by the electrostatic attraction mechanism based on the interaction between positively charged [BMIM][BF4] moieties and negatively charged phosphate groups. In addition, silica matrix also contributes to the separation resolution.     

Microwave-assisted synthesis of sulfide M2S3 (m = Bi, Sb) nanorods using an ionic liquid

Single-crystalline Bi(2)S(3) and Sb(2)S(3) nanorods have been successfully synthesized by the microwave-assisted ionic liquid method. The starting reagents were Bi(2)O(3) or Sb(2)O(3), HCl, Na(2)S(2)O(3), and ethylene glycol (EG) or ethanolamine, and the ionic liquid used was 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF(4)]). Our experiments showed that the ionic liquid played an important role in the morphology of M(2)S(3) (M = Bi, Sb). Single-crystalline Bi(2)S(3) nanorods could be prepared in the presence of [BMIM][BF(4)]. However, urchinlike Bi(2)S(3) structures consisting of nanorods were formed without using [BMIM][BF(4)]. Single-crystalline Sb(2)S(3) nanorods were obtained in the presence of [BMIM][BF(4)]. However, single-crystalline Sb(2)S(3) nanosheets could be prepared in the absence of [BMIM][BF(4)]. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and electron diffraction (ED).     

Determination of the hydrogen-bonding induced local viscosity enhancement in room temperature ionic liquids via femtosecond time-resolved depleted spontaneous emission

The fluorescence depletion dynamics of Rhodamine 700 (R-700) molecules in room temperature ionic liquids (RTILs) 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF(4)]) and 1-hydroxyethyl-3-methylimidazolium tetrafluoroborate ([HOemim][BF(4)]) were investigated to determine the local viscosity of the microenvironment surrounding the fluorescent molecules, which is induced by strong hydrogen bonding interaction between cationic and anionic components in RTILs. The solvation and rotation dynamics of R-700 molecules in RTILs show slower time constants relative to that in conventional protic solvents with the same bulk viscosity, indicating that the probe molecule is facing a more viscous microenvironment in RTILs than in conventional solvents because of the strong hydrogen bonding interaction between cationic and anionic components. In addition, this effect is more pronounced in hydroxyl-functionalized ionic liquid than in the regular RTIL due to the presence of a hydroxyl group as a strong hydrogen bonding donor. The hydrogen-bonding-induced local viscosity enhancement effect related to the heterogeneity character of RTILs is confirmed by the nonexponential rotational relaxation of R-700 determined by time-correlated single photon counting (TCSPC). The geometry of hydrogen bonding complexes with different components and sizes are further optimized by density functional theory methods to show the possible hydrogen-bond networks. A model of the hydrogen-bonding network in RTILs is further proposed to interpret the observed specific solvation and local viscosity enhancement effect in RTILs, where most of the fluoroprobes exist as the free nonbonding species in the RTIL solutions and are surrounded by the hydrogen-bonding network formed by the strong hydrogen-bonding between the cationic and anionic components in RTIL. The optimized geometry of hydrogen bonding complexes with different components and sizes by density functional theory methods confirms the local viscosity enhancement effect deduced from fluorescence depletion and TCSPC experiments. The calculated interaction energies reveal the existence of the stronger hydrogen bonding network in RTILs (especially in hydroxyl-functionalized ionic liquid) than that in conventional protic solvent, which leads to the enhancement effect of local microviscosity, and therefore leads to the slow solvation and rotation dynamics of probe molecules observed in RTILs.     

Determination of an acidic scale in room temperature ionic liquids

The acidity scale of different Br?nsted acids in ionic liquids such as [BMIM][NTf2], [BMIM][BF4], and [BMMIM][BF4] has been investigated by determination of Hammett functions, using a spectrophotometric indicator method. This scale should permit one to correlate the acidity strength of ionic liquid systems with their ability to achieve acid-catalyzed reactions.     

Ionic liquid modified GC electrode for the direct electrochemistry of chloroperoxidase

Chloropcroxidase （CPO） was immobilized by konjac glucomannan （KGM） on the 1-butyl-3-methyl imidazolium tetrafluoroborate [BMIM][BF4]/Nafion modified glassy carbon eloctrode. The electrochemical behaviors of the immobilized CPO were investigated by cyclic voltammetry. The results showed that CPO was successfully immobilized on the GCE and underwent fast direct electron transfer reactions with the formal potential at -0.3 V vs. SCE. The modified electrode showed a good catalytic activity for elcctrocatalytical reduction of O2 and H2O2.