New 2-(benzothiazol-2-yl)-1,3-tropolones derived from 3,4,5,6-tetrachloro-1,2-benzoquinone

An acid-catalyzed reaction of substituted 5-chloro-2-methylbenzothiazoles with 3,4,5,6-tetrachloro-1,2-benzoquinone leads to 5,6,7-trichloro-2-(5-chlorobenzothiazol-2-yl)-1,3-tropolone and 4,5,6,7-tetrachloro-2-(5-chlorobenzothiazol-2-yl)-1,3-tropolone. Molecular structure of 4,5,6,7-tetrachloro-2-(5-chlorobenzothiazol-2-yl)-1,3-tropolone was established by X-ray crystallography.     

Synthesis and Structure of New 2-(2-Quinolyl)-1,3-tropolone Derivatives

4,6-Di-tert-butyl-3-nitro-1,2-benzoquinone reacts with substituted 2-methylquinolines to give the corresponding 2-(2-quinolyl)-4-nitro-1,3-tropolones and 2-(2-quinolyl)-1,3-tropolones.     

Synthesis and isomerization reaction of 2-(benzoxazol-2-yl)-1,3-tropolones

An acid-catalyzed reaction of 2-methylbenzoxazole with 3,4,5,6-tetrachloro-1,2-benzoquinone leads to 2-(benzoxazol-2-yl)-5,6,7-trichloro-1,3-tropolone and 2-(benzoxazol-2-yl)-4,5,6,7-tetrachloro-1,3-tropolone. 1,3-Tropolones upon reflux in ethyl alcohol undergo the rearrangement resulted in the seven-membered ring contraction to form ethyl 2-(benzoxazol-2-yl)-5,6-dichloro-3-hydroxybenzoate and ethyl 2-(benzoxazol-2-yl)-4,5,6-trichloro-3-hydroxybenzoate. The molecular structure of the latter was established by X-ray diffraction analysis.     

Syntheses and coordination behaviour of 2-(ortho-phosphinophenyl)-functionalised 1,3-dioxolanes and 1,3-dioxanes towards a [(COD)Rh]-complex fragment - models for immobilised complexes

The syntheses are reported of the ether-phosphine ligands: 2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane (1a), 2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane (1b), 2-(ortho-diphenylphosphinophenyl)-1,3-dioxane (1c), 2-(ortho-diisopropylphosphinophenyl)-1,3-dioxane (1d). Their reaction with [(COD)RhCl]₂ (COD: 1,5-cyclooctadiene) results in the formation of the mononuclear complexes: {chloro(COD)[2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane]rhodium(I)} (2a), {chloro(COD)[2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane]rhodium(I)} (2b), {chloro(COD)[2-(ortho-diphenylphosphinophenyl)-1,3-dioxane]rhodium(I)} (2c), and {chloro(COD)[2-(ortho-diisopropylphosphinophenyl)-1,3-dioxane]rhodium(I)} (2d). The chloride ligands of compounds 2a and 2b were abstracted with TlPF₆, with accompanied insertion of an acetal oxygen atom of the ligands 1a and 1b into the coordination sphere of the metal centre, producing {(COD)[η²-P,O-2-(ortho-diphenylphosphinophenyl)-1,3-dioxolane]rhodium(I)}PF₆ (3a∗PF₆) and {(COD)[η²-P,O-2-(ortho-diisopropylphosphinophenyl)-1,3-dioxolane]rhodium(I)}PF₆ (3b∗PF₆). In contrast the dioxane analogues of 3, 3c∗BF₄ and 3d∗BF₄, were formed by reacting the ligands 1c, 1d with [Rh(COD)₂]BF₄. The ligands 1 and the complexes 2 serve as model compounds for their via acetalation to a polyvinylalcohol resin bound analogues. The complexes synthesised were employed as pre-catalysts in the hydroformylation reaction of 1-octene.     

Synthesis, characterization and electroluminescence of B(III) compounds: BPh2(2-(2-quinolyl)naphtho[b]imidazolato) and BPh2(2-(2-quinolyl)benzimidazolato)

Two novel luminescent boron compounds, BPh₂(2-(2-quinolyl)naphtho[b]imidazolato) (1) and BPh₂(2-(2-quinolyl)benzimidazolato) (2), have been synthesized by the reactions of triphenylboron with appropriate ligands, 2-(2-quinolyl)naphtho[b]imidazole (QNI) and 2-(2-quinolyl)benzimidazole (QBI), respectively. The structure of 1 was determined by single crystal X-ray diffraction, while 2 by spectroscopic methods. The structure of 1 reveals that the boron center is four coordinated. Several types of OLED possessing different colors were fabricated by using 1 as emitter. For the three-layer OLED with the structure ITO/NPB/2/Alq₃/Mg-Ag, an emission band covering the whole visible region from 400 to 750 nm with the maximum brightness of 320 cd/m² was observed, indicating a perfect white light OLED (CIE = 0.33, 0.37). Compounds 1 and 2 form a new family of organometallic emitting materials which could be of interest for practical application.     

An efficient method for the synthesis of 1-chlorophenazines based on the selective cathodic reduction of 3,3,6,6-tetrachloro-1,2-cyclohexanedione

An efficient method for the synthesis of 1-chlorophenazines has been established. It is based on the use of 3,6,6-trichloro-2-hydroxy-2-cyclohexen-1-one 4 as a synthetic equivalent of 3-chloro-1,2-benzoquinone 3. The intermediate 4 was prepared in near quantitative yield by electroreductive monodechlorination of 3,3,6,6-tetrachloro-1,2-cyclohexanedione 1, which is an inexpensive and easily available starting material. Efficient reactions of 4 with primary 1,2-phenylenediamines provided the corresponding 1,1,4-trichloro-1,2,3,4-tetrahydrophenazines 6, which were directly aromatized by treatment with 2,6-lutidine to give the title compounds in high yields. X-ray crystallographic structures for 1,1,4-trichloro-1,2,3,4-tetrahydro-6-methylphenazine 6f, 8-benzoyl-1,1,4-trichloro-1,2,3,4-tetrahydro-phenazine 6ea, and 1,7-dichlorophenazine 10db have been determined.     

Synthesis and stereochemical studies of 1- and 2-phenyl-substituted 1,3-oxazino[4,3-a]isoquinoline derivatives

Starting from the 1′- or 2′-phenyl-substituted 1-(2′-hydroxyethyl)-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinoline diastereomers 3 and 6, 4-unsubstituted and 4-(p-nitrophenyl)- and 4-oxo-substituted 1-phenyl- and 2-phenyl-9,10-dimethoxy-2H,4H-1,6,7,11b-tetrahydro-1,3-oxazino[4,3-a]isoquinolines (7-12) were prepared. The relative configurations and the predominant conformations of the products were determined by NMR spectroscopy, by quantum chemical calculations and, for (2R^∗,4S^∗,11bR^∗)-9,10-dimethoxy-4-(p-nitrophenyl)-2-phenyl-2H,4H-1,6,7,11b-tetrahydro-1,3-oxazino[4,3-a]isoquinoline (11), by X-ray diffraction.     

Stereoselective carbonyl reductions of chloro-substituted 8-oxabicyclo[3.2.1]oct-6-en-3-ones

The lithium aluminium hydride reduction of 2,2,4,4-tetrachloro-8-oxabicyclo[3.2.1]oct-6-en-3-one (8) was reinvestigated. In contrast to most halogeno-substituted oxabicyclic ketones, which give predominantly the corresponding endo alcohols, the expected (3endo)-2,2,4,4-tetrachloro-8-oxabicyclo[3.2.1]oct-6-en-3-ol (9n) is formed in a minute proportion. An X-ray structure analysis of the dominating product gave proof of the exo-alcohol, i.e., (3exo)-2,2,4,4-tetrachloro-8-oxabicyclo[3.2.1]oct-6-en-3-ol (9x). On the other hand, reduction of trichloroketone 11, 2,2,endo-4-trichloro-8-oxabicyclo[3.2.1]oct-6-en-3-one, and the methoxy-substituted chloroketones 13 and 14 provided the corresponding endo alcohols (12 and 15).     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

Regio- and stereoselective cycloadditions of (1Z,4R,5R)-1-arylmethylidene-4-benzoylamino-3-oxo-5-phenylpyrazolidin-1-ium-2-ides to methyl methacrylate

[3+2] Cycloadditions of (1Z,4R^∗,5R^∗)-1-arylmethylidene-4-benzoylamino-3-oxo-5-phenylpyrazolidin-1-ium-2-ides 1a-e to methyl methacrylate gave the 1-CO₂Me regioisomers 3/3′, exclusively, in 1-67% yields. Stereocontrol was dependent on the ortho-substituents at the 1′-aryl group in dipole 1: ortho-unsubstituted dipoles 1a-c gave the major (1R^∗,3R^∗,5R^∗,6R^∗)-isomers 3a-c, whilst ortho-disubstituted dipoles gave the major (1R^∗,3S^∗,5R^∗,6R^∗)-isomers 3′d,e. The structures of cycloadducts were determined by NMR and X-ray diffraction.     

A new synthetic procedure to spiro[cyclohexane-1,3′-indoline]-2′,4-diones

A new synthetic pathway to spiro[cyclohexane-1,3′-indoline]-2′,4-diones was found starting from 3-chloromethylene-2-indolones 1 and Danishefsky's diene 2. Their synthesis consists of several steps involving the formation of the cycloadducts, the 6-chloro-4-trimethylsilyloxy-2-methoxyspiro[cyclohex-3-en-1,3′-indolin]-2′-one derivatives, transformed into spiro[cyclohexa-2,5-dien-1,3′-indoline]-2′,4-diones via 6-chloro-spiro[cyclohex-2-en-1,3′-indoline]-2′,4-dione intermediates. The reduction of spiro[cyclohexa-2,5-dien-1,3′-indoline]-2′,4-diones gave spiro[cyclohexane-1,3′-indoline]-2′,4-diones 7. Using a ‘one pot reaction’, starting from 1 and 2, compounds 7 were obtained in satisfactory overall yield.     

Synthesis of (±)-2R,4R,5S-2-methoxy-4-nitro-5-(2,3,4-trimethoxyphenyl)cyclohexanone and (±)-2R,4S,5R-2-methoxy-5-nitro-4-(2,3,4-trimethoxyphenyl)cyclohexanone as colchicine mimetics

Colchicine mimetic (±)-4S,5R-4-nitro-5-(2,3,4-trimethoxyphenyl)cyclohexene (1) was epoxidized to afford a mixture of epoxides. The epoxides were separately converted in two steps, with high stereoselectivity, to two regioisomeric α-methoxyketones. One regioisomer, (±)-2R,4S,5R-2-methoxy-5-nitro-4-(2,3,4-trimethoxyphenyl)cyclohexanone (17), proved to be about 12-fold more potent than synthetic precursor 1 against HCT-116 tumor cells while the other regioisomer, (±)-2R,4R,5S-2-methoxy-4-nitro-5-(2,3,4-trimethoxyphenyl)cyclohexanone (16), and the synthetic intermediates tested showed no improvement in potency.     

Nitroalkylation and nitroalkenylation reactions of γ-lactone enolates. A facile ring switch from polysubstituted γ-lactones to polysubstituted γ-lactams

Michael addition of lithium enolates of γ-butyrolactone 1 and α-methyl-γ-butyrolactone 1′ to (E)-1-nitropropene 2, (E)-β-nitrostyrene 3 and (E)-2-nitro-1-phenylpropene 4 is described. Reactions of the lithium enolate of 1′ with 2 and 4 occurred with high diasteroselectivity (80 and 92% d.e., respectively). Reactions of the zinc enolate of 1′ with two β-nitroenamines and two methylthio-substituted 1-amino-2-nitro-1,3-dienes were also examined. Catalytic reduction of the nitroalkylated and nitroalkenylated products allowed the achievement of functionalized γ-lactams and/or cyclic hydroxamic acids.     

A novel synthesis of spiro[(2,2-dimethyl-[1,3]-dioxane)-5,2′-(2′,3′-dihydroindole)] using SRN1 reaction conditions

A concise synthesis of the spiro[(2,2-dimethyl-[1,3]-dioxane)-5,2′-(2′,3′-dihydroindole)] nucleus from substituted benzyl chlorides and 5-(hydroxymethyl)-2,2-dimethyl-5-nitro-1,3-dioxane 5 as starting materials is reported. The nitro intermediates 6 and 7 were prepared under S_RN1 reaction conditions.     

Synthesis,electrochemistry, MO properties,and X-ray diffraction structures of the new redox-active diphosphine ligand 2-(2-thienylidene)-4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (tbpcd) and the rhenium compound fac-BrRe(CO)3(tbpcd)

Knoevenagel condensation of 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) with thiophene-2-carboxaldehyde furnishes the second-generation unsaturated diphosphine ligand 2-(2-thienylidene)-4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (1, tbpcd) in high yield. The substitution chemistry of the rhenium compounds BrRe(CO)₅ and BrRe(CO)₃(THF)₂ with tbpcd has been investigated and found to produce fac-BrRe(CO)₃(tbpcd) (2). Compounds 1 and 2 have been isolated and fully characterized in solution by IR and NMR (¹H and ³¹P) spectroscopies, in addition to mass spectrometry, and X-ray crystallography. The redox properties of 1 and 2 have been examined by cyclic voltammetry, and these data are discussed relative to the results obtained from extended Hückel MO calculations and emission spectroscopic studies, as well as related ligand derivatives previously prepared by us. Our data indicate that the lowest excited state in tbpcd and fac-BrRe(CO)₃(tbpcd) arises from a π → π^∗ intraligand (IL) transition confined exclusively to the tbpcd ligand.     

A convenient one-pot synthesis of 2-(trifluoromethyl)-3,4,7,8-tetrahydro-2H-chromen-5(6H)-one derivatives and their further transformations

The trifluoromethyl containing heterocycles, 2-hydroxy-4-aryl-3-(thien-2-oyl)-2-(trifluoromethyl)-3,4,7,8-tetrahydro-2H-chromen-5(6H)-one derivatives 4, were synthesized via a one-pot three-component reaction of aldehyde 1 with 1,3-cyclohexanedione 2 and 4,4,4-trifluoro-1-(thien-2-yl)butane-1,3-dione 3 in the presence of a catalytic amount of Et₃N. The effect of bases and solvents on the reaction efficiency and yield was briefly investigated. Treatment of 4 with an excess amount of NH₄OAc in ethanol afforded 2-trifluoromethyl-1H-quinolin-5-one derivatives 5. Refluxing of 4 with TsOH in CHCl₃ gave the corresponding dehydrated products 8.     

Reaction of nido-1,2-(CpRuH)2B3H7 with ethynylferrocene to yield new metallacarboranes

Addition of ethynylferrocene to nido-1,2-(Cp^∗RuH)₂B₃H₇ (1) at ambient temperature leads to nido-1,2-(Cp^∗Ru)₂(1,5-μ-C{Fc}Me)B₃H₇ (2, 3) and closo-4-Fc-1,2-(Cp^∗RuH)₂-4,6-C₂B₂H₃ (4). Compounds 2 and 3 represent a pair of geometric isomers, nido-species in which the regiochemistry of the alkyne reduction conforms to the Markovnikoff rule. Compound 4 is an octahedral structure in which the inserted alkyne is on an open face of the closo cluster.     

Effect of the rigidity and flexibility features of 2-pyridinyl or 8-quinolinyl based N-N chiral ligands on the stereochemical properties of [Pd(N-N)Cl2] complexes

The [Pd(N-N^∗)Cl₂] complexes have been obtained, as yellow solids, in almost quantitative yields; N-N^∗ indicate bidentate chiral ligands (S_a)-1, (S_a)-2, (S,S)-3, (R,R)-4, containing the rigid 2-pyridinyl or 8-quinolinyl building block skeleton and the C₂-symmetric chiral framework trans-2,5-dimethylpyrrolidinyl or (S)-(+)-2,2′-(2-azapropane-1,3-diyl)-1,1′-binaphthalene. The ligands pairs have the same C₂-symmetric chiral framework but different building block skeleton, beyond that for the basicity in the N-donor atoms, for rigidity and flexibility features. The N-N^∗ ligands act as chelating ligands leading a square planar geometry. The compounds [Pd(S,S-3)Cl₂] and [Pd(R,R-4)Cl₂] have been also characterised by X-ray diffraction. The rigidity and flexibility features of (S,S)-3 and (R,R)-4 ligands induce a different orientation of the trans-2,5-dimethylpyrrolidinyl moiety with respect to the pyridinyl and quinolinyl plane. This work shows that intrinsic rigidity and flexibility are not enough to define the ligand properties and to preview the effects that they induce on the reactivity of the metal complex.     

Cycloaddition of methyl 2-(2,6-dichorophenyl)-2H-azirine-3-carboxylate to electron-rich 2-azadienes

tert-Butyldimethylsililoxy-2-aza-1,3-butadienes react with 2H-azirine 3 leading to Diels-Alder cycloadducts in moderate yields. The reactions are endo- and regioselective with the azirine being added by its less hindered face. There is only one product in the case of 1b, 4b. There are two isomers (4 and 5) from 1a, 1c and 1d. A different result was obtained with the diene 1e. Diene 1e formed products 4e and 8. Some of compounds 4 and 5 have been hydrolysed leading to functionalised aziridines 7. Compound 8 gave aziridine 9.     

A mechanistic study on the intramolecular ionic Diels-Alder reaction of 2-methyl-3,9,11-tridecatriene-2-ol and 2,11-dimethyl-1,3,9,11-dodecatetraene

Intramolecular ionic Diels-Alder reaction of 2-methyl-3,9,11-tridecatriene-2-ol (1) was studied under acidic conditions. Treatment of 2-methyl-3,9,11-tridecatriene-2-ol (1) with trifluoromethanesulfonic acid yielded 7-methyl-8-isopropenyl-1,2,3,4,4aR^∗,7R^∗,8R^∗,8aS^∗-octahydronaphthalene (4) and (1Z)-1-((E)-but-2-enylidene)-2-(2-methylpropenyl)cyclohexane (5) through regioselective intramolecular ionic Diels-Alder reaction. The reaction appeared to proceed partly through a stepwise mechanism involving a carbocation intermediate. However, a concerted pathway rather than a stepwise one is suggested to be involved in the acid-catalyzed intramolecular Diels-Alder reaction of 2,11-dimethyl-1,3,9,11-dodecatetraene (13).