Reaction of N-methylsulfonyl-and N-(p-tolylsulfonyl)-2-(cyclopent-1-en-1-yl)anilines with bromine in the presence of potassium thiocyanate and in methanol

The reactions of N-methylsulfonyl-and N-(p-tolylsulfonyl)-2-(cyclopent-1-en-1-yl)-6-methylaniline with molecular bromine in the presence of potassium thiocyanate gave N-methylsulfonyl-and N-(ptolylsulfonyl)-2-(5-isothiocyanatocyclopent-1-en-1-yl)-6-methylanilines. N-Methylsulfonyl-2-(cyclopent-1-en-1-yl)-6-methylaniline reacted with bromine in methanol in the presence of NaHCO₃ or with CuBr₂ in MeOH to afford N-methylsulfonyl-2-(5-methoxycyclopent-1-en-1-yl)-6-methylaniline. The reaction of N-methylsulfonyl-2-(5-isothiocyanatocyclopent-1-en-1-yl)-6-methylaniline with diethylamine led to the formation of N-methylsulfonyl-2-{5-[diethylamino(thioxo)methyl]aminocyclopent-1-en-1-yl}-6-methylaniline which was converted into 5-methyl-4-methylsulfonyl-2,3,3a,4-tetrahydrocyclopenta[b]indole by heating with potassium hydroxide.     

Synthesis and reactions of N-acetyl- and N-(2-chloroacetyl)-N-[(2E)-1-methylbut-2-en-1-yl]-2-iodoanilines

The reaction of N-(1-methylbut-2-en-1-yl)-2-iodaniline with Ac₂O or ClCH₂C(O)Cl results in a mixture of syn- and anti-atropisomers of N-acetyl- and N-chloroacetyl-N-(1-methylbut-2-en-1-yl)-2-iodaniline in a ratio of 1:1. Ozonolysis of the latter followed by reduction with dimethyl sulfide in CH₂Cl₂ gives rise to the atropisomers mixture of 2-[N-(chloroacetyl)-N-(2-iodophenyl)]aminopropanal in a ratio of 1:3. When heated in boiling benzene, the mixture of atropoisomeric aldehydes reacts with triphenylphosphine to afford a mixture of 2-[(N-acetyl)-N-(2-iodophenyl)]aminopropanal atropisomers in 1:3 ratio.     

N-Arylation of a hindered indoline as a route to 2-(2-methyl-1-(4-oxo-3,4-dihydrophthalazin-1-yl)-1H-indol-3-yl)acetic acid derivatives

A convenient synthesis of 2-(2-methyl-1-(4-oxo-3,4-dihydrophthalazin-1-yl)-1H-indol-3-yl)acetic acid derivatives is described using a microwave-promoted multi-step S_NAr reaction. The desired products were found to exhibit atropisomerism.     

Synthesis of (E)-2-(1-ferrocenylmethylidene)malonic acid derivatives by a cobalt-catalyzed domino reaction of ethyl diazoacetate, carbon monoxide and ferrocenylimines

The domino reaction of ethyl diazoacetate, carbon monoxide and ferrocenylimines was investigated in the presence of Co₂(CO)₈ as catalyst. In most cases the main products are 2-(1-ferrocenylmethylidene) malonates formed by an N(1)-C(4) cleavage of the primarily derived β-lactams. The latter compounds could only be isolated when the reaction was carried out at relatively low CO pressure, using an excess of ethyl diazoacetate. trans-N-(tert-Butyl)-3-ethoxycarbonyl-4-ferrocenyl-β-lactam proved to be the most stable one among these compounds and could be isolated in 55% yield. N-alkyl β-lactams were shown to undergo acidic cleavage leading to the E isomers of 2-(1-ferrocenylmethylidene) malonates as the main products. The structures of the two new compounds, (E)-2-ethoxycarbonyl-3-ferrocenyl-N-((R)-1-phenylethyl)-2-propenamide and trans-N-(tert-butyl)-3-ethoxycarbonyl-4-ferrocenyl-β-lactam were confirmed by X-ray crystallography. The relative thermodynamical stability of the products as well as the energetics of the acid-mediated cleavage of the β-lactam ring was elucidated with DFT calculations.     

Activite optique de polyamines tertiaires du type poly[thio-(N-R1-N-R2 aminomethyl)-1 ethylene]

Ultra-violet, ORD and CD spectra of (?)poly[thio1-(N-N-diethylaminomethyl) ethylene] (Ia) prepared by stereoelective polymerization of racemic N-N-diethyl-N-(thiirane-2-ylmethyl) amine using ZnEt₂-(—) 3-3-dimethyl-1,2 butanediol as initiator system, of (+)poly[thio1-(N-N-diethyl aminomethyl) ethylene] obtained from a partially resolved enantiomer using ZnEt₂-CH₃OH as initiator system, of poly[thio1-(N-methyl-N-sec-butyl aminomethyl) ethylene] and of poly[thio1-(N-methyl-N-(1-phenylethyl) aminomethyl) ethylene] in organic solvents (tertiary amine form) and in water (hydrochloride form) are described. Observed Cotton effects are associated with electronic transitions of chromophores by comparison with model molecules: N-methyl2-aminobutane, ethyl-thio-2-methylbutane and polypropylene sulfide. For polyamine (Ia), their contributions to optical rotatory powers in the visible are evaluated after decomposition of corresponding CD curves in Gaussian partial Cotton effects. The effects of other optically active electronic transitions located below 180 nm are deduced by difference. Influence of positions of chromophores with regard to chiral centers and of the protonation of nitrogen atoms on observed Cotton effects are discussed.     

Stability and thermodynamics of La(III)-, Pr(III)-, Nd(III)-, Gd(III)- and Eu(III)-p-nitrobenzaldehyde thiosemicarbazone systems

Three complexes containing bidentate N-2,3-dimethylphenylglycine, (2,3-HDPG), N-2,4-dimethylphenylglycine, (2,4-HDPG) and N-2-ethylphenylglycine, (2-HEPG) acids have been prepared and characterized. These compounds have the general formula Zn(2,3-DPG)₂·2 H₂O, Zn(2,4-DPG)₂ and Zn(2-EPG)₂·2 H₂O, respectively. The structure of the complexes as inferred from their chemistries have been found to be compatible with the infrared spectral data. The thermal behaviour of these complexes has been studied from their TG, DTG and DSC diagrams obtained in a dynamic atmosphere of pure air. Heats of dehydration have been calculated from DSC curves.     

Copper-catalyzed asymmetric conjugate addition of Grignard reagents to 1-(N,N-diisopropylcarbamoyloxy)-1-tosyl-1-alkenes

A copper-catalyzed conjugate addition of Grignard reagents to 1-(N,N-diisopropylcarbamoyloxy)-1-tosyl-1-alkenes led to 1-(N,N-diisopropylcarbamoyloxy)-1-tosyl-2-branched alkanes. Various copper ligands were screened for this reaction. From certain substrates and allylmagnesium bromide, several Josiphos ligands gave low to moderate asymmetric inductions, along with good diastereoselectivity. The stereochemistry of the 1-(N,N-diisopropylcarbamoyloxy)-1-tosyl-2-branched alkanes from this reaction was assigned by comparison with the same products from another synthetic route using chiral pool synthesis and stereoselective lithiation methods.     

Peculiarities of the reaction of (SPY-5-34)-dichloro-(κ2(C,O)-2-formylbenzylidene)(1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene)ruthenium with potassium hydridotris(pyrazolyl)borate

The reaction of (SPY-5-34)-dichloro-(κ²(C,O)-2-formylbenzylidene)(H₂IMes)ruthenium (H₂IMes=1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) with potassium hydridotris(pyrazolyl)borate (KTp) in dichloromethane yielded an unusual ruthenium complex chloro(κ³(N,N,N)-chlorotris(pyrazolyl)borate)(κ²(C,C)-1-(2,4,6-trimethylphenyl)-3-(4,6-dimethylphenyl-2-methylidene)-4,5-dihydroimidazol-2-ylidene)ruthenium (2). In 2, a chlorotris(pyrazolyl)borate ligand, which had been created during this reaction, binds in κ³(N,N,N)-mode to the central ruthenium atom. Additionally, a double C–H activation of a methyl group of the H₂IMes resulted in the formation of a chelating N-heterocyclic biscarbene ligand and liberation of the former 2-formylbenzylidene as 2-methylbenzaldehyde. Formally, a double hydrogen transfer from a methyl group of the H₂IMes to the initial carbene carbon occurred. 2 was characterized by NMR spectroscopy, elemental analysis and single crystal X-ray structure determination. The reaction of KTp with (SPY-5-34)-dichloro(κ²(C,O)-2-ethoxycarbonylbenzylidene)(H₂IMes)ruthenium, on the other hand, gave the expected product chloro(κ³(N,N,N)-hydridotris(pyrazolyl)borate)(H₂IMes)(2-ethoxycarbonylbenzylidene)ruthenium (6). Compound 6 was characterized by NMR spectroscopy, elemental analysis and single crystal X-ray structure determination. Investigations of the relative activities of these complexes in model ring opening metathesis polymerizations showed a pronounced thermal latency. Polymerizations proceeded at temperatures above 100 °C in case of 6 and 130 °C in case of 2.     

Enantioselective synthesis of (1S,2S)-1,2-di-tert-butyl and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamines

An enantioselective synthesis of sterically congested 1,2-di-tert-butyl and 1,2-di-(1-adamantyl)ethylenediamines has been developed. Thus, diastereomerically pure trans-1-apocamphanecarbonyl-4,5-dimethoxy-2-imidazolidinones 6 and 7 were successfully prepared by optical resolution of (±)-trans-4,5-dimethoxy-2-imidazolidinone using apocamphanecarbonyl chloride (MAC-Cl) followed by stereospecific and stepwise substitution of the dimethoxyl groups using tert-butyl or 1-adamantyl cuprates to provide (4S,5S)-4,5-di-tert-butyl and (4R,5R)-4,5-di-(1-adamantyl)-2-imidazolidinones 12 and 15, respectively. Furthermore, N-acetyl 4,5-di-tert-butyl and 4,5-di-(1-adamantyl)-2-imidazolidinones 16a,b were enantioselectively deacetylated using a catalytic oxazaborolidine system to provide enantiopure 1-p-tolylsulfonyl-4,5-di-tert-butyl-2-imidazolidinones 12 and 19 and 1-p-tolylsulfonyl-4,5-di-(1-adamantyl)-2-imidazolidinones 18 and 20, respectively. Finally, N-p-tolylsulfonyl-2-imidazolidinones 12 and 15 were treated with 30 equiv of Ba(OH)₂·8H₂O to achieve ring cleavage and to provide (1S,2S)-1,2-di-tert-butylethylenediamine 3 and (1R,2R)-1,2-di-(1-adamantyl)ethylenediamine 4.     

Synthesis of N-acetyl-3,3a,4,8b- and -1,3a,4,8b-tetrahydrocyclopenta[b]indoles from N- and 2-(cyclopent-2-en-1-yl)anilines

Reactions of 2-bromo-N-(cyclopent-2-en-1-yl)-4-methylaniline and N-(cyclopent-2-en-1-yl)-2-iodo-4,6-dimethylaniline with acetyl bromide in the presence of potassium carbonate gave mixtures of syn and anti atropisomers of the corresponding N-acetyl derivatives at ratios of 1: 1 and 3: 2 respectively. Heating of these mixtures in toluene in the presence of Pd(OAc)₂, PPh₃, Et₃N, and K₂CO₃ (KOAc) afforded mixtures of isomeric N-acetyl-7-methyl-3,3a,4,8b- and -1,3a,4,8b-tetrahydrocyclopenta[b]indoles at a ratio of 3: 1 or N-acetyl-5,7-dimethyl-3,3a,4,8b- and -1,3a,4,8b-tetrahydrocyclopenta[b]indoles at a ratio of 2: 3. N-Acetyl-3,3a,4,8b-tetrahydrocyclopenta[b]indole was found to undergo thermal isomerization into N-acetyl-1,3a,4,8btetrahydrocyclopenta[b]indole.     

Synthesis, structure and dynamic stereochemistry of (O → Si)-chelate N-(trifluorosilylmethyl)-[N-(S)-(1-phenylethyl)]acetamide and 1-(trifluorosilylmethyl)-2-oxoperhydroazepine: Retention of the O → Si coordination in the adduct with KF and 18-crown-6

The novel compounds, N-(trifluorosilylmethyl)-[N-(S)-(1-phenylethyl)]-acetamide (1a) and 1-(trifluorosilylmethyl)-2-oxoperhydroazepine (1b) have been prepared from the corresponding NH-compounds using ClCH₂SiCl₃/Et₃N or ClCH₂SiCl₃/(Me₃Si)₂NH followed by methanolysis or hydrolysis of the reaction mixture in the presence of Lewis bases, and then BF₃ etherate. Potassium-(18-crown-6)-(2-oxoperhydroazepinomethyl)tetrafluorosilicate (2) was synthesized by reaction of the trifluoride (1b) with KF in the presence of 18-crown-6. Using ¹⁹F, ²⁹Si NMR and X-ray diffraction techniques it was established that the silicon atom is pentacoordinate in the trifluorides (1a, b) and hexacoordinate in the adduct 2. Thus the internal coordination of the O → Si bond present in the trifluoride (1b) is retained in the adduct 2.The stereochemical non-rigidity of the trifluorides (1a, b) and the N-(trifluorosilylmethyl)-N-methylacetamide (1c) was investigated using dynamic ¹⁹F NMR spectroscopy. The activation barriers for permutational isomerization are in the range 9.5-10 kcal mol⁻¹. Lower values of ΔG^# for permutation of trifluorides (1a-c) compared to the monofluorides with the coordination core OSiC₃F together with small negative values for the activation entropy implies a non-dissociative mechanism. Quantum-chemical analysis suggests a mechanism involving a turnstile rotation.     

Chiral fluoroacetic acid: synthesis of (R)- and (S)-[2H1]-fluoroacetate in high enantiopurity

A two-step synthesis of (R)- and (S)-[²H₁]-fluoroacetate (sodium salts) in high enantioselectivity is reported. The synthesis is the development of a previous one in which the enantioselectivity has been increased from ～38% ee to >95% ee. The improvement in enantioselectivity applied Bio’s methodology, which involved a deoxyfluorination reaction with DAST on either enantiomer of [²H₁]-benzyl alcohol, adding TMS-morpholine to the reaction. The additive promotes an S_N2 inversion process, and suppresses a competing non-stereospecific S_N1 reaction course, and as a result significantly improves the stereointegrity of the C–F bond formation. The intermediate [²H₁]-benzyl alcohols, [²H₁]-benzyl fluorides and the product [²H₁]-fluoroacetates as their hexyl esters were separately assayed for their stereochemical integrity, using the Courtieu method. This method involved measuring their ²H NMR spectra in a chiral matrix of poly-γ-benzyl l-glutamate. The chiral assay demonstrated that there was no significant loss in stereointegrity during the deoxyfluorination reaction and showed that the enantiomers of [²H₁]-fluoroacetate were generated with high enantiomeric purity (95% ee).     

4-Substituted 5-nitroisoquinolin-1-ones from intramolecular Pd-catalysed reaction of N-(2-alkenyl)-2-halo-3-nitrobenzamides

4-Methyl- and 4-benzyl-5-aminoisoquinolin-1-ones are close analogues of the water-soluble PARP-1 inhibitor 5-AIQ. Their synthesis was approached through Pd-catalysed cyclisations of N-(2-alkenyl)-2-iodo-3-nitrobenzamides. Reaction of N,N-diallyl-2-iodo-3-nitrobenzamide with Pd(PPh₃)₄ gave a mixture of 2-allyl-4-methyl-5-nitroisoquinolin-1-one and 2-allyl-4-methylene-5-nitro-3,4-dihydroisoquinolin-1-one. N-Benzhydryl-N-cinnamyl-2-iodo-3-nitrobenzamide similarly gave 2-benzhydryl-4-benzyl-5-nitroisoquinolin-1-one and 2-benzhydryl-4-benzylidene-5-nitro-3,4-dihydroisoquinolin-1-one. The isomeric products are not interconvertible. A deuterium-labelling study indicated that the isomers were formed by different pathways: a π-allyl-Pd route and the classical Heck route. The corresponding secondary amides N-allyl-2-iodo-3-nitrobenzamide and N-((substituted)-cinnamyl)-2-iodo-3-nitrobenzamide gave good yields of the required 4-methyl- and 4-((substituted)-benzyl)-5-nitroisoquinolin-1-ones, respectively, under optimised conditions (Pd(PPh₃)₄, Et₃N, Bu₄NCl, 150 °C, rapid heating). Hydrogenation of the nitro groups gave 4-methyl- and 4-benzyl-5-aminoisoquinolin-1-ones, which were potent inhibitors of PARP-1 activity.     

Preparation,molecular structures,and characteristic properties of (E)-1-(2-furyl)- and (E)-1-(2-thienyl)-2-(3-guaiazulenyl)ethylenes and (E)-1-(3-furyl)- and (E)-1-(3-thienyl)-2-(3-guaiazulenyl)ethylenes

Wittig reactions of 2-furaldehyde (20) [and thiophene-2-carbaldehyde (21)] with (3-guaiazulenylmethyl)triphenylphosphonium bromide (19) in ethanol containing NaOEt at 25 °C for 24 h under argon give (E)-1-(2-furyl)-2-(3-guaiazulenyl)ethylene (22E) and (E)-1-(2-thienyl)-2-(3-guaiazulenyl)ethylene (23E) in 53 and 36% yields. Similarly, Wittig reactions of 3-furaldehyde (29) [and thiophene-3-carbaldehyde (30)] with 19 under the same reaction conditions as for 20 and 21 afford (E)-1-(3-furyl)-2-(3-guaiazulenyl)ethylene (31E) and (E)-1-(3-thienyl)-2-(3-guaiazulenyl)ethylene (32E) in 32 and 46% yields. Molecular structures and characteristic properties as well as preparation of the title E (i.e., one of the geometrical isomers) forms, with a view to comparative study, are reported. Moreover, reactions of those conjugated π-electron systems with TCNE (=tetracyanoethylene) in benzene [and in DMF (=N,N-dimethylformamide)] at 25 °C for 24 h under argon yield unique products, possessing interesting molecular structures, respectively, whose characteristic properties and crystal structures are documented, also.     

Reaction of N-acetyl- and N-[1-(arylsulfonylimino)ethyl]-1,4-benzoquinone imines with sodium arenesulfinates

N-Acetyl- and N-[1-(arylsulfonylimino)ethyl]-1,4-benzoquinone imines having no substituent in the 2- and/or 6-position of the quinoid ring react with sodium arenesulfinates preferentially according to the 1,4-addition pattern. The presence of an ArSO₂N group favors radical ion reaction with formation of 1,6-addition products.     

A novel synthesis of N(1)-(substituted)-pyrimido[5,4-e]-1,2,4-triazine-5,7(1H,6H)-diones

A new synthesis of N₁-(substituted)-pyrimido[5,4-e]-1,2,4-triazine-5,7(1H,6H)-diones, which are analogues of the natural product toxoflavin, is reported. Condensation of preformed alkyl or aryl hydrazones with 6-chloro-3-methyl-5-nitrouracil efficiently provides pyrimidotriazinediones in a three-step process that broadens the scope of R₁ substituents.     

Synthesis of 1-organyl-1-(trimethylsiloxy)-2-(dimethylamino)ethenes and new hypervalent silicon compounds based thereon

1-Organyl-1-(trimethylsiloxy)-2-(dimethylamino)ethenes were synthesized for the first time, and their reactions with trichloro(methyl)silane and trifluoro(phenyl)silane afforded silicon bis-chelates, methylbis-[2-(dimethylamino)-1-(organyl)ethenolato-N,O]siliconium chlorides and bis[1-(dimethylamino)-3,3-dimethylbut-1-en-2-olato-N,O]fluoro(phenyl)silicon(IV), respectively.     

Coordination properties of N2S (1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane) or N2S2 (1,8-bis(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane or 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene) donor ligands toward Rh(I)

The 1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane ligand (bdtp) reacts with [Rh(COD)(THF)₂][BF₄] to give [Rh(COD)(bdtp)][BF₄] ([1][BF₄]), which is fluxional in solution on the NMR time scale. Its further treatment with carbon monoxide leads to a displacement of the 1,5-cyclooctadiene ligand, generating a mixture of two complexes, namely, [Rh(CO)₂(bdtp)][BF₄] ([2][BF₄]) and [Rh(CO)(bdtp-κ³N,N,S)][BF₄] ([3][BF₄]). In solution, [2][BF₄] exists as a mixture of two isomers, [Rh(CO)₂(bdtp-κ²N,N)]⁺ ([2a]⁺) and [Rh(CO)₂(bdtp-κ³N,N,S)]⁺ ([2b]⁺; major isomer) rapidly interconverting on the NMR time scale. At room temperature, [2][BF₄] easily loses one molecule of carbon monoxide to give [3][BF₄]. The latter is prone to react with carbon monoxide to partially regenerate [2][BF₄]. The ligands 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene (bddf) and 1,8-bis(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane (bddo) are seen to react with two equivalents of [Rh(COD)(THF)₂][BF₄] to give the dinuclear complexes [Rh₂(bddf)(COD)₂][BF₄]₂ ([4][BF₄]₂) and [Rh₂(bddo)(COD)₂][BF₄]₂ ([5][BF₄]₂), respectively. In such complexes, the ligand acts as a double pincer holding two rhodium atoms through a chelation involving S and N donor atoms. Bubbling carbon monoxide into a solution of [4][BF₄]₂ results in loss of the COD ligand and carbonylation to give [Rh₂(bddf)(CO)₄][BF₄]₂ ([6][BF₄]₂). The single-crystal X-ray structures of [3][CF₃SO₃], [5][BF₄]₂ and [6][BF₄]₂ are reported.     

Palladium-catalyzed selective N-(hetero)arylation or N,N′-di(hetero)arylation of 1-aminoindoles

The selective synthesis of N-(hetero)aryl-1-aminoindoles 3 from the corresponding N-aminoindoles and (hetero)aryl halides using a catalyst combination of Pd₂(dba)₃ associated to Josiphos is described. By switching to Xantphos as the ligand, the alternate catalytic system allows the coupling to proceed efficiently for the preparation of symmetrical and unsymmetrical N,N′-diaryl-1-aminoindole derivatives in good yields.     

Rapid access to 3-(N-substituted)-aminoquinolin-2(1H)-ones using palladium-catalyzed C-N bond coupling reaction

A series of 3-(N-substituted)-aminoquinolin-2(1H)-ones have been synthesized by the palladium-catalyzed C-N coupling reaction starting from 3-bromoquinolin-2-(1H)-ones. Various nucleophiles including amines, amides, sulfonamides, carbamates and ureas have been used successfully. In all the cases, the reactions take place rapidly in 1,4-dioxane and proceed in good to excellent yield using palladium acetate as a catalyst, Xantphos as a ligand and Cs₂CO₃ as a base.