Rapid separation of pharmaceutical enantiomers using electrokinetic chromatography with a novel chiral microemulsion

A novel oil-in-water microemulsion incorporating the chiral surfactant dodecoxycarbonylvaline (DDCV) was used to achieve the rapid enantiomeric separation of pharmaceutical drugs by electrokinetic chromatography (EKC). Incorporation of DDCV into a microemulsion resulted in an elution range more than double that provided the micellar form of the surfactant aggregate. Interestingly, for the same compounds the enantioselectivity provided by the chiral DDCV microemulsions ranged from 1.06-1.30 for the neutral and cationic drugs, which was slightly higher than that provided by chiral DDCV micelles. The use of a low surface tension oil (ethyl acetate) permitted a much lower concentration of chiral surfactant to be employed; this, together with the use of a zwitterionic buffer (ACES) resulted in a very low conductivity microemulsion that allowed a higher separation voltage to be utilized, resulting in rapid enantiomeric separations (< 8 min.). Mobility matching of the buffer cation(s) was used to improve peak shape and efficiencies. In our limited survey of the phase diagram, the optimum composition of the microemulsion buffer was 1.0% (w/v) DDCV (30 mM), 0.5% (v/v) ethyl acetate, 1.2% (v/v) 1-butanol and 50 mM ACES buffer at pH 7.     

Effect of surfactant concentration and buffer selection on chromatographic figures of merit in chiral microemulsion electrokinetic chromatography

The enantiomeric resolution of 15 different pharmaceutical compounds was explored using chiral microemulsion electrokinetic chromatography (MEEKC). The microemulsion employed was comprised of the chiral surfactant dodecoxycarbonylvaline (DDCV), 1-butanol, and ethyl acetate, at an initial composition of 1% w/v:1.2% v/v:0.5% v/v, respectively. The effect of varying the background buffer composition, voltage, and ultimately the surfactant concentration and/or aggregate phase ratio were examined. Changing from a zwitterionic buffer ((2-[2-amino-2-oxoethyl)amino]ethanesulfonic acid, ACES) to the same concentration of phosphate buffer improved the efficiency and decreased overall analysis time, but also resulted in a decrease in chiral resolution. Furthermore, using phosphate buffer while simultaneously increasing the percent DDCV from 1 to 4% increased the efficiencies from a range of 34,000 to 59,000 N/m to a range of 160,000 to 400,000 N/m. While the enantioselectivities did not change significantly, the improvement in efficiencies, elution range, and retention factors provided an increase in both resolution and the number of enantiomers that were separated. Using an optimized microemulsion comprised of phosphate buffer and 4% DDCV, chiral separation was achieved for all 11 pairs of enantiomers, with a resolution ranging from 0.90 to 4.71. Moreover, the average resolution doubled in going from nonoptimized to optimized conditions for five of the eleven compounds. Finally, a comparison was made of the effect of increasing only the surfactant concentration by a factor of 4 versus increasing the overall composition (or phase ratio) by a factor of 4. Ultimately, the microemulsion containing 4% DDCV provided a larger elution range, greater resolution, and more optimal retention than that provided by the 4x phase increase.     

Influence of microemulsion chirality on chromatographic figures of merit in EKC: results with novel three-chiral-component microemulsions and comparison with one- and two-chiral-component microemulsions

Novel microemulsion formulations containing all chiral components are described for the enantioseparation of six pairs of pharmaceutical enantiomers (atenolol, ephedrine, metoprolol, N-methyl ephedrine, pseudoephedrine, and synephrine). The chiral surfactant dodecoxycarbonylvaline (DDCV, R- and S-), the chiral cosurfactant S-2-hexanol, and the chiral oil diethyl tartrate (R- and S-) were combined to create four different chiral microemulsions, three of which were stable. Results obtained for enantioselectivity, efficiency, and resolution were compared for the triple-chirality systems and the single-chirality system that contained chiral surfactant only. Improvements in enantioselectivity and resolution were achieved by simultaneously incorporating three chiral components into the aggregate. The one-chiral-component microemulsion provided better efficiencies. Enantioselective synergies were identified for the three-chiral-component nanodroplets using a thermodynamic model. Additionally, two types of dual-chirality systems, chiral surfactant/chiral cosurfactant and chiral surfactant/chiral oil, were examined in terms of chromatographic figures of merit, with the former providing much better resolution. The two varieties of two-chiral-component microemulsions gave similar values for enantioselectivity and efficiency. Lastly, the microemulsion formulations were divided into categories based on the number of chiral microemulsion reagents and the average results for each pair of enantiomers were analyzed for trends. In general, enantioselectivity and resolution were enhanced while efficiency was decreased as more chiral components were used to create the pseudostationary phase (PSP).     

Two-chiral-component microemulsion electrokinetic chromatography-chiral surfactant and chiral oil: part 1. dibutyl tartrate

The first simultaneous use of a chiral surfactant and a chiral oil for microemulsion EKC (MEEKC) is reported. Six stereochemical combinations of dodecoxycarbonylvaline (DDCV: R, S, or racemic, 2.00% w/v), racemic 2-hexanol (1.65% v/v), and dibutyl tartrate (D, L, or racemic, 1.23% v/v) were examined as chiral pseudostationary phases (PSPs) for the separation of six pairs of pharmaceutical enantiomers: pseudoephedrine, ephedrine, N-methyl ephedrine, metoprolol, synephrine, and atenolol. Subtle differences were observed for three chromatographic figures of merit (alpha(enant), alpha(meth), k) among the chiral microemulsions; a moderate difference was observed for efficiency (N) and elution range. Dual-chirality microemulsions provided both the largest and smallest enantioselectivities, due to small positive and negative synergies between the chiral microemulsion components. For the ephedrine family of compounds, dual-chiral microemulsions with surfactant and oil in opposite stereochemical configurations provided higher enantioselectivities than the single-chiral component microemulsion (RXX), whereas dual-chiral microemulsions with surfactant and oil in the same stereochemical configurations provided lower enantioselectivities than RXX. Slight to moderate enantioselective synergies were confirmed using a thermodynamic model. Efficiencies observed with microemulsions comprised of racemic dibutyl tartrate or dibutyl-D-tartrate were significantly higher than those obtained with dibutyl-L-tartrate, with an average difference in plate count of about 25 000. Finally, one two-chiral-component microemulsion (RXS) provided significantly better resolution than the remaining one- and two-chiral-component microemulsions for the ephedrine-based compounds, but only slightly better or equivalent resolution for non-ephedrine compounds.     

Temperature effects on chiral microemulsion electrokinetic chromatography employing the chiral surfactant dodecoxycarbonylvaline

Dodecoxycarbonylvaline (DDCV) microemulsions (1% and 4%, w/v) were employed to evaluate the retention mechanism of a series of enantiomers over a temperature range of 15-35 degrees C. From the acquired retention data, van't Hoff plots were constructed and enthalpy and entropy of transfer were calculated from the slope and intercept, respectively. Resolution, enantioselectivity, distribution coefficients and Gibb's free energy were also calculated, as well as between enantiomer differences in enthalpy, entropy and Gibb's free energy. Finally, comparisons were made between the microemulsion thermodynamic data and a corresponding set of micellar data. While the 4% DDCV microemulsion did not provide a linear van't Hoff relationship, the 1% DDCV microemulsion was linear over a temperature range of 15-30 degrees C. For the 1% DDCV microemulsion, the enthalpic contribution to retention was consistently favorable (deltaH < 0), whereas the entropic contribution varied from compound to compound. Finally, while the achiral attraction of the analytes was greater for the micellar phase, the microemulsion seemed to provide a suitable difference in entropy (and Gibb's free energy) between enantiomers to achieve chiral discrimination.     

Effect of oil substitution in chiral microemulsion electrokinetic chromatography

In a previous publication (Pascoe, R., Foley, J. P., Analyst 2002, 127, 710-714), a novel chiral microemulsion based on 1.0% w/v dodecoxycarbonylvaline (DDCV), 0.50% v/v ethyl acetate and 1.2% v/v 1-butanol, was shown to provide rapid enantiomeric separations of various pharmaceutical compounds. The two deficiencies noted with this method were that the peak shapes obtained were asymmetric and the efficiencies were lower than those previously obtained using DDCV micelles (Peterson, A. G., Ahuja, E. S., Foley, J. P., J. Chromatogr. B 1996, 683, 15-28). This study examines the use of three alternative low-interfacial-tension oils (methyl acetate, methyl propionate, and methyl formate), in combination with DDCV, to characterize their effect on the elution range, efficiency, resolution, and enantioselectivity of various pharmaceutical enantiomers. The oils were evaluated in both the same volume percentage and the same molar concentration as ethyl acetate in the original DDCV microemulsion system. Including ethyl acetate, a total of seven microemulsion systems were examined. For the compounds that were separated, average enantioselectivities ranged from 1.09 to 1.28, with corresponding efficiencies of 14,000-20,000. While some interesting differences were observed, ethyl acetate still proved to be the most advantageous in terms of enantioselectivity, resolution, and elution range.     

An initial assessment of the use of gradient elution in microemulsion and micellar liquid chromatography

Novel microemulsion and micellar HPLC separations have been achieved using gradient elution and columns packed with reverse phase material. Initial attempts at gradient microemulsion liquid chromatography proved impossible on use of a microemulsion successfully used in capillary electrophoresis. Optimisation of the microemulsion composition allowed the generation of stable microemulsions to achieve separations in HPLC. The novel use of organic-solvent micellar chromatography in gradient elution mode was shown to give efficient separations. A range of efficient separations of pharmaceuticals and related impurities were obtained. Acidic, basic, and neutral solutes were resolved covering a wide range of water solubilities and polarities. Elution times were in the order of 4-15 minutes. Separations were briefly compared to those accomplished with a micellar HPLC system. It is proposed that gradient elution in both microemulsion and micellar HPLC can be regarded as a highly successful means of achieving resolution of complex mixtures and should be considered for routine analysis and further investigation.     

Characterization of cephalosporin transfer between aqueous and colloidal phases by micellar electrokinetic chromatography

A new electrokinetic chromatographic method was applied to the determination of the partition coefficient between water and micelle for a group of cephalosporins (cefmetazol, cephradin, cefaclor, ceftazidim, cefodizim, cephapirin, cephalothin and ceftriaxon) using sodium dodecyl sulphate as an anionic surfactant in microemulsion and in micellar systems. In the new method, the running buffer contains both the micelles and the drug, and the injected solution contains the same concentration of micelles as the running buffer but not the drug. The mobility of the drug can be measured from a negative peak recorded the chromatogram. The required parameters for the determination of the capacity factor (mu(aq) and /mu(me) are the electrophoretic mobilities of the solutes in the aqueous and the micelle phases, mu(eff) is the effective mobility in the micellar system or in the microemulsion) were measured by the new micellar and microemulsion electrokinetic chromatography technique. Linear log-log relationships were found between both the micelle-water partition coefficient and the capacity factor and the n-octanol-water partition coefficient.     

Comparing micellar electrokinetic chromatography and microemulsion electrokinetic chromatography for the analysis of preservatives in pharmaceutical and cosmetic products

In this study, separation and determination of nine preservatives ranging from hydrophilic to hydrophobic properties, which are commonly used as additives in various pharmaceutical and cosmetic products, by micellar electrokinetic chromatograpy (MEKC) and microemulsion electrokinetic chromatography (MEEKC) were compared. The effect of temperature, buffer pH, and concentration of surfactant on separation were examined. In MEKC, the separation resolution of preservatives improved markedly by changing the sodium dodecyl sulfate concentration. Temperature and pH of running buffers were used mainly to shorten the magnitude of separation time. However, in order to detect all preservatives in a single run in a MEEKC system, a microemulsion of higher pH was needed. The separation resolution was improved dramatically by changing temperature, and a higher concentration of SDS was necessary for maintaining a stable microemulsion solution, therefore the separation of the nine preservatives in MEEKC took longer than in MEKC. An optimum MEKC method for separation of the nine preservatives was obtained within 9.0 min with a running buffer of pH 9.0 containing 20 mM SDS at 25 degrees C. A separation with baseline resolution was also obtained within 16 min using a microemulsion of pH 9.5 which composed of SDS, 1-butanol, and octane, and a shorter capillary column at 34 degrees C. Finally, the developed MEKC and MEEKC methods determined successfully preservatives in various cosmetic and pharmaceutical products.     

Chiral cyclodextrin-modified microemulsion electrokinetic chromatography

Cyclodextrin (CD)-modified microemulsion electrokinetic chromatography (MEEKC) or CD-MEEKC has not previously been applied to the area of chiral separations. Herein, the results of investigations of various microemulsions with CD additives are presented. Two different microemulsions are explored: an ethyl acetate sodium dodecyl sulfate microemulsion, and a chiral dodecoxycarbonylvaline (DDCV) microemulsion. Each microemulsion is paired separately with a neutral CD (hydroxypropyl-beta-CD) and an anionic CD (sulfated-beta-CD). In addition, the chiral DDCV microemulsion is investigated in both the R- and S- form. By varying simple parameters such as buffer system, applied voltage, surfactant enantiomer, and type of cyclodextrin, dramatic improvements in the chiral separations were noted. Resolution was found to be highly dependent on buffer identity and concentration, and somewhat dependent on whether the CDs used were randomly or highly sulfated. Under optimized conditions, the resolution ranged from 0.8 to 4.8, with plate counts ranging from 4000 to 26 000. Additionally, S- and R-levetiracetam, which had never before been enantioseparated via capillary electrophoresis (CE) methodologies, were separated in less than 8 min, with a resolution of 1.1.     

Enantioseparation of esbiothrin by cyclodextrin‐modified microemulsion and micellar electrokinetic chromatography

A comparison between chiral cyclodextrin‐modified microemulsion electrokinetic chromatography (CD‐MEEKC) and cyclodextrin‐modified micellar electrokinetic chromatography (CD‐MEKC) for the enantiomeric separation of esbiothrin was carried out. For both methods, the separation conditions were optimized by varying CD types and concentration, running buffer pH and compositions, organic modifiers, and temperature. The optimal CD‐MEEKC conditions were 0.8% n‐heptane, 2.3% SDS, 6.6% n‐butanol, 90.3% 10 mM sodium tetraborate containing 3% (w/v, the ratio of CD mass to microemulsion volume) methyl‐β‐cyclodextrin, pH 10, 25°C. The optimized CD‐MEKC conditions were 3.3% SDS, 96.7% 10 mM sodium tetraborate containing 5% (w/v) β‐CD, pH 10, 25°C. The difference in physicochemical properties of the buffer and CDs resulted in different optimal CD type. The competitive distribution between the microemulsion (or micelle) and chiral CD contributed to the chiral separation. Both methods provided excellent separation (R_s ～? 3) with similar migration time (ca. 15 min). CD‐MEEKC provided higher separation efficiencies (>300000) than CD‐MEKC (>200000). The LODs for CD‐MEEKC and CD‐MEKC were 4.7 μg/mL and 3.2 μg/mL, respectively. The RSDs of migration time and peak area for CD‐MEEKC were slightly higher than for CD‐MEKC. Both the demonstrated CD‐MEEKC and CD‐MEKC methods provided high efficiencies, low LODs, and reproducible enantioseparations of esbiothrin.     

Polymeric alkenoxy amino acid surfactants: III. Chiral separations of binaphthyl derivatives

Micellar electrokinetic chromatography (MEKC) was investigated for the enantiomeric separations of three binaphthyl derivatives ((+/-)-1,1'-bi-(2-naphthol) (BOH), (+/-)-1,1'-binaphthyl-2,2'-diyl hydrogenphosphate (BNP), and (+/-)-1,1'-binaphthyl-2,2'-diamine (BNA)) using two recently synthesized chiral polymeric surfactants (polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) and polysodium N-undecenoxy carbonyl-L-isoleucinate (poly-L-SUCIL)) in our laboratory. Enantiomeric separation (resolution and selectivity) of the binaphthyl derivatives was influenced by polymerization concentration of the monomeric surfactant, pH, type and concentration of the background electrolyte (BGE) as well as concentration of the polymeric surfactant. Two BGEs (dibasic phosphate and Tris-borate) were compared for this study. The use of dibasic phosphate as BGE in poly-L-SUCL provides baseline resolution of (+/-) BOH and (+/-) BNP, however, no resolution and selectivity at all was observed for (+/-) BNA. A similar approach was adopted with Tris-borate-poly-L-SUCL system at fixed pH 10.1, which resulted in baseline resolution of all three binaphthyl derivatives. Although R(s) of binaphthyl derivatives was always higher and electroosmotic flow (EOF) was always lower using Tris-borate than with dibasic phosphate, the selectivity values for the two buffer systems did not differ significantly. In addition, it was found that poly-L-SUCL provided better enantiomeric resolution and selectivity for (+/-) BOH and (+/-) BNA, while poly-L-SUCIL provided enhanced enantiomeric resolution but similar enantioselectivity for (+/-) BNP. This indicates that the depth of analyte penetration into the palisade layer and the micellar core are responsible for chiral recognition of hydrophobic analyte (e.g., (+/-) BOH, and (+/-) BNA) whereas for moderately hydrophobic analyte (e.g., (+/-) BNP) interaction with the polar head group seems to dictate chiral recognition. Simultaneous enantioresolution of all three binaphthyl derivatives was possible in a single electrophoretic run using either poly-L-SUCL or poly-L-SUCIL. Further comparison of the two polymeric surfactants showed that poly-L-SUCL provided slightly longer analysis time than poly-L-SUCIL but the use of the former polymeric surfactant should be preferred due to its ability to provide complete baseline resolution and higher selectivity of all the three atropisomers with a wider chiral window.     

Chiral microemulsion electrokinetic chromatography with two chiral components: Improved separations via synergies between a chiral surfactant and a chiral cosurfactant

In this study, the combination of two chiral components in a microemulsion formulation for the separation of enantiomers via microemulsion EKC (MEEKC) was successfully accomplished. Previous publications of chiral microemulsions have utilized only one chiral entity; the surfactant, cosurfactant, or oil was chiral. This is the first study, to date, of the effects of using two chiral species in a single pseudostationary phase (PSP). The chiral surfactant dodecoxycarbonylvaline (DDCV) was used in conjunction with the chiral cosurfactant S-2-hexanol. Ethyl acetate was incorporated as the oil core of the microemulsion and the buffer was 50 mM phosphate at a pH of 7. Additionally, a microemulsion prepared with racemic 2-hexanol was used for comparison to a previous DDCV microemulsion and as a baseline for the newly formulated dual chiral microemulsion. The efficiencies, resolutions, and enantioselectivities for the S-2-hexanol, racemic 2-hexanol, and original 1-butanol DDCV microemulsions are compared. The hexanol-based PSPs provide improved efficiencies and resolutions. To evaluate the combination of each DDCV enantiomer (R and S) with S-2-hexanol, changes in Gibb's free energy were calculated. A synergistic effect was found when two chiral components were combined to form a microemulsion.     

Simultaneous isocratic separation of phenolic acids and flavonoids using micellar liquid chromatography

The simultaneous isocratic separation of a mixture of five phenolic acids and four flavonoids (two important groups of natural polyphenolic compounds with very different polarities) was investigated in three different RPLC modes using a hydro‐organic mobile phase, and mobile phases containing SDS at concentrations below and above the critical micellar concentration (submicellar LC and micellar LC (MLC), respectively). In the hydro‐organic mode, methanol and acetonitrile; in the submicellar mode methanol; and in the micellar mode, methanol and 1‐propanol were examined individually as organic modifiers. Regarding the other modes, MLC provided more appropriate resolutions and analysis time and was preferred for the separation of the selected compounds. Optimization of separation in MLC was performed using an interpretative approach for each alcohol. In this way, the retention of phenolic acids and flavonoids were modeled using the retention factors obtained from five different mobile phases, then the Pareto optimality method was applied to find the best compatibility between analysis time and quality of separation. The results of this study showed some promising advantages of MLC for the simultaneous separation of phenolic acids and flavonoids, including low consumption of organic solvent, good resolution, short analysis time, and no requirement of gradient elution.     

Concentration and medium micellar kinetic effects caused by morphological transitions

The reaction methyl naphthalene-2-sulfonate + Br(-) was investigated in several alkanediyl-α-ω-bis(dodecyldimethylammonium) bromide, 12-s-12,2Br(-) (with s = 2, 3, 4, 5, 6, 8, 10, 12), micellar solutions in the absence and in the presence of various additives. The additives were 1,2-propylene glycol, which remains in the bulk phase, N-decyl N-methylglucamide, MEGA10, which forms mixed micelles with the dimeric surfactants, and 1-butanol, which distributes between the aqueous and micellar phases. Information about the micellar reaction media was obtained by using conductivity and fluorescence measurements. In all cases, with the exception of water-1,2-prop 12-5-12,2Br(-) micellar solutions, with 30% weight percentage of the organic solvent, a sphere-to-rod transition takes place upon increasing surfactant concentration. In order to quantitatively explain the experimental data within the whole surfactant concentration range, a kinetic equation based on the pseudophase kinetic model was considered, together with the decrease in the micellar ionization degree accompanying micellar growth. However, theoretical predictions did not agree with the experimental kinetic data for surfactant concentrations above the morphological transition. An empirical kinetic equation was proposed in order to explain the data. It contains a parameter b which is assumed to account for the medium micellar kinetic effects caused by the morphological transition. The use of this empirical equation permits the quantitative rationalization of the kinetic micellar effects in the whole surfactant concentration range.     

Positron annihilation spectroscopy and micellar systems

Positron annihilation spectroscopy (PAS) has emerged as a powerful technique for investigating structural changes, phase transitions and microenvironmental transformations in a variety of systems. The process of molecular aggregation in micellar systems is known to be cooperative and size limited; it shows features similar to that of a classical phase transition. Similarly, the changes in the concentration of surfactant and the solubilizate bring about several microstructural and conformational transformations in these systems. High sensitivity of positron annihilation parameters to such changes makes it a potential candidate for investigating micellar and microemulsion systems. This paper deals with this aspect of positron annihilation spectroscopy. Applications of this technique to investigate conformational, structural and microenvironmental transformations in micellar and microemulsion systems are discussed. Its superiority over the conventional techniques in such investigations is demonstrated. It is shown that this technique reveals finer details of otherwise considered to be single phase regions in a phase diagram. Its usefulness in delineating phase boundaries and hence in mapping of phase diagrams is also discussed.     

Kinetic micellar effects in tetradecyltrimethylammonium bromide-pentanol micellar solutions

The reactions 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane + OH(-) and 2-(p-nitrophenyl)ethyl bromide + OH(-) were studied in tetradecyltrimethylamonium bromide, TTAB, and TTAB-pentanol micellar solutions. The influence of changes in the surfactant concentration as well as changes in the hydroxide ion concentration on the observed rate constant was investigated. If changes in the cmc and ionization degree provoked by the presence of the different amounts of n-pentanol in the micellar solutions are taken into account, the experimental kinetic data can be rationalized quantitatively by using the PIE model. Assuming that the ion-exchange equilibrium constant, K(OH(-)/Br(-)), for the competition between the bromide and the hydroxide ions in all TTAB and in TTAB-pentanol micellar solutions studied is the same, a good agreement between the theoretical and the experimental kinetic data was found in all the micellar media for the two processes studied. This assumption was checked by experimentally determining the ion-exchange equilibrium constant K(OH(-)/Br(-)) in TTAB and TTAB-pentanol micellar solutions through a spectroscopic method, results showing that the presence of n-pentanol does not affect substantially the value of K(OH(-)/Br(-)). The second-order rate constants obtained from the fittings decrease slightly when the amount of pentanol increases, being greater than that in aqueous solution. This acceleration can be explained considering that micelles accelerate the reactions in which the charge is delocalized in the transition state.     

Aliphatic carboxylic acids as new modifiers for separation of 2,4-dinitrophenyl amino acids by micellar liquid chromatography

The possibilities of isocratic separation of 2,4-dinitrophenyl derivatives of 12 amino acids that considerably differ in hydrophobicity by micellar mobile phases with different organic modifiers have been discussed. For the first time aliphatic carboxylic acids have been used as modifiers of micellar eluent in micellar liquid chromatography with C18 columns. Elution strength of hybrid micellar phases on the basis of sodium dodecylsulfate and aliphatic carboxylic acids increases in sequence: acetic相似文献   

A comparative study of microemulsion electrokinetic capillary chromatography and micellar electrokinetic capillary chromatography for the analysis of UV-absorbing compounds in human urine

Separations of human urine by microemulsion electrokinetic chromatography (MEEKC) and micellar electrokinetic capillary chromatography (MEKC) with respect to resolution, migration times and efficiencies were optimized and compared. The optimised MEEKC and MEKC methods were simple and fast, both of which are excellent characteristics for the complex separations required in clinical and biomedical studies. However, resolution in MEKC was significantly greater than in MEEKC although migration times were 30% faster for the optimised MEEKC method. In addition, a faster analysis method (short-end injection) specifically for routine screening purposes was also investigated. With both MEEKC and MEKC modes, this provided short separations (less than 4 min for urine) with no major compromise in resolution. In conclusion, we found that MEEKC offered no real advantage over MEKC for urine analysis.     

Investigation of the chiral surfactant N-dodecoxycarbonylvaline in electrokinetic chromatography: improvements in elution range and pH stability via mixed micelles and vesicles, and the hydrophobicity determination of basic pharmaceutical drugs

The chiral surfactant dodecoxycarbonylvaline (DDCV) has proven to be an effective pseudostationary phase for the separation of many enantiomeric pharmaceutical compounds. In this study the elution range and the prediction of octanol-water partitioning for the DDCV micellar system was examined. Through incorporation of DDCV in mixed micelles and unilamellar vesicles, enhancement of the elution range was observed. The mixed micelles contained a second anionic surfactant, sodium dodecyl sulfate (SDS), while the vesicles were composed of DDCV and the cationic surfactant cetyltrimethylammonium bromide (CTAB). Enantioselectivity, as well as other chromatographic and electrophoretic parameters, were compared between the mixed micelles, vesicles, and DDCV micelles. The hydrophobicity of the DDCV system was also evaluated as a predictor of n-octanol-water partition coefficients for 15 beta amino alcohols. The correlation between the logarithm of the retention factor (log k) and log P(ow) for seven hydrophobic beta-blockers and eight beta-agonists were r2 = 0.964 and r2 = 0.814, respectively.