Fracture analysis of circular-arc interface cracks in piezoelectric materials

The anti-plane problem of N arc-shaped interfacial cracks between a circular piezoelectric inhomogeneity and an infinite piezoelectric matrix is investigated by means of the complex variable method. Cracks are assumed to be permeable and then explicit expressions are presented, respectively, for the electric field on the crack faces, the complex potentials in media and the intensity factors near the crack-tips. As examples, the corresponding solutions are obtained for a piezoelectric bimaterial system with one or two permeable arc-shaped interfacial cracks, respectively. Additionally, the solutions for the cases of impermeable cracks also are given by treating an impermeable crack as a particular case of a permeable crack. It is shown that for the case of permeable interfacial cracks, the electric field is jumpy ahead of the crack tips, and its intensity factor is always dependent on that of stress. Moreover all the field singularities are dependent not only on the applied mechanical load, but also on the applied electric load. However, for the case of a homogeneous material with permeable cracks, all the singular factors are related only to the applied stresses and material constants.     

ANALYSIS OF CRACK-TIP SINGULARITIES FOR AN INTERFACIAL PERMEABLE CRACK IN METAL/PIEZOELECTRIC BIMATERIALS

By modeling metal as a special piezoelectric material with extremely small piezoelec- tricity and extremely large permittivity,we have obtained the analytical solutions for an interfacial permeable crack in metal/piezoelectric bimaterials by means of the generalized Stroh formalism. The analysis shows that the stress fields near a permeable interfacial crack tip are usually with three types of singularities:r~(-1/2 iε)and r~(-1/2).Further numerical calculation on the oscillatory indexεare given for 28 types of metal/piezoelectric bimaterials combined by seven commercial piezoelectric materials: PZT-4,BaTiO_3,PZT-5H,PZT-6B,PZT-7A,P-7 and PZT-PIC 151 and four metals:copper,silver,lead and aluminum,respectively.The explicit expressions of the crack tip energy release rate(ERR)and the crack tip generalized stress intensity factors(GSIF)are obtained.It is found that both the ERR and GSIF are independent of the electric displacement loading,although they seriously depends on the mechanical loadings.     

Asymptotic fields in the finite element analysis of electrically permeable interface cracks in piezoelectric bimaterials

Summary The interface crack problem for a piezoelectric bimaterial based on permeable conditions is studied numerically. To find the singular electromechanical field at the crack tip, an asymptotic solution is derived in connection with the conventional finite element method. For mechanical and electrical loads, the complex stress intensity factor for an interface crack is obtained. The influence of the applied loads on the electromechanical fields near the crack tip is also studied. For a particular case of a short crack with respect to the bimaterial size, the numerical results are compared with the exact analytical solutions, obtained for a piezoelectric bimaterial plane with an interface crack.One author (V.G.) gratefully acknowledges the support provided by the Alexander von Humboldt Foundation of Germany.accepted for publication 7 June 2004     

层状磁电复合材料界面共线裂纹平面问题分析

本文研究了面内电磁势载荷作用下双层压电压磁复合材料中共线界面裂纹问题．考虑了压电材料的导磁性质和压磁材料的介电性质,引入了界面电位移和磁感强度的连续性条件．利用Fourier 变换得到一组第二类Cauchy 型奇异积分方程．进一步导出了相应问题的应力强度因子、电位移强度因子和磁感强度强度因子的表达式,给出了应力强度因子的数值结果．结果表明电磁载荷会导致界面裂纹尖端I、II 混合型应力奇异性,同时还伴随着电位移和磁感强度的奇异性．比较了双裂纹左右端的应力强度因子,发现在面内极化方向上施加面内磁势载荷时共线裂纹内侧尖端区域的两个法向应力场发生互相干涉增强．     

Exact solutions for piezoelectric screw dislocations near two asymmetrical edge cracks emanating from an elliptical hole

The interaction between piezoelectric screw dislocations and two asymmetrical interfacial cracks emanating from an elliptic hole under combined mechanical and electric load at infinity is dealt with. The closed-form solutions are derived for complex potentials and generalized stress fields. In the limiting cases, some well-known results can be obtained from the present solutions. Moreover, some new exact solutions are shown. The stress intensity factor and the energy release rate at the right tip due to a screw dislocation near the right interfacial crack are also calculated. The results show that the shielding effect of dislocation on crack expanding decreases with the increase in dislocation azimuth angle and the distance between the dislocation and the crack tip, and the repulsion acting on the dislocation from the other half plane demotes crack propagation. The increasing of the length of the other crack promotes crack growth, but the increasing of the minor semi-axis demotes it.     

An analytically-numerical approach for the analysis of an interface crack with a contact zone in a piezoelectric bimaterial compound

An interface crack with an artificial contact zone at the right-hand side crack tip between two dissimilar finite-sized piezoelectric materials is considered under remote mixed-mode loading. To find the singular electromechanical field at the crack tip, an asymptotic solution is derived in connection with the conventional finite element method. For mechanical loads, the stress intensity factors at the singular points are obtained. As a particular case of this solution, the contact zone model (in Comninou’s sense) is derived. A simple transcendental equation and an asymptotic formula for the determination of the real contact zone length are derived. The dependencies of the contact zone lengths on external load coefficients are illustrated in graphical form. For a particular case of a short crack with respect to the dimensions of the bimaterial compound, the numerical results are compared to the exact analytical solutions, obtained for a piezoelectric bimaterial plane with an interface crack.     

Anti-plane shear crack normal to and terminating at the interface of two bonded piezoelectric ceramics

The electroelastic analysis of two bonded dissimilar piezoelectric ceramics with a crack perpendicular to and terminating at the interface is made. By using Fourier integral transform, the associated boundary value problem is reduced to a singular integral equation with generalized Cauchy kernel, the solution of which is given in closed form. Results are presented for a permeable crack under anti-plane shear loading and in-plane electric loading. Obtained results indicate that the electroelastic field near the crack tip in the homogeneous piezoelectric ceramic is dominated by a traditional inverse square-root singularity, while the electroelastic field near the crack tip at the interface exhibits the singularity of power law r^−α, r being distance from the interface crack tip and α depending on the material constants of a bi-piezoceramic. In particular, electric field has no singularity at the crack tip in a homogeneous solid, whereas it is singular around the interface crack tip. Numerical results are given graphically to show the effects of the material properties on the singularity order and field intensity factors.     

On the influence of the electric permeability on an interface crack in a piezoelectric bimaterial compound

An interface crack between two semi-infinite piezoelectric spaces under the action of remote mixed mode loading and electric flux is considered. The properties of the materials, loading and crack geometry admit to consider a two-dimensional problem in the plane perpendicular to the crack front. The crack is assumed to be free from mechanical loading and the limited permeable electric condition holds true. Assuming the electric flux is constant along the crack area, using the known presentations of all electromechanical fields via a piecewise holomorphic vector function, the problem is reduced to a vector Hilbert problem and solved in an analytical way. Clear analytical expressions for stresses and electric displacement as well as for stress and electric intensity factors are derived. As a particular case, a crack in a homogeneous piezoelectric material is considered and exact analytical formulae are presented for this case. The numerical analysis of the obtained formulae showed that for small values of the electric flux the model of a completely permeable crack can be used for any real crack permeability’s. The validity of such an approximation decreases with increase in the mechanical loading and especially of the electric flux.     

矩形压电体中反平面裂纹的电弹性场

基于线性压电理论,本文获得了含有中心反平面裂纹的矩形压电体中的奇异应力和电场。利用Fourier积分变换和Fourier正弦级数将电绝缘型裂纹问题化为对偶积分方程,并进一步归结为易于求解的第二类Fred-holm积分方程。获得了裂纹尖端应力、应变、电位移和电场的解析解,求得了裂纹尖端场的强度因子及能量释放率。分析了压电矩形体的几何尺寸对它们的影响。结果表明,对于电绝缘型裂纹,裂纹尖端附近的各个场变量都具有-1/2阶的奇异性,能量释放率与电荷载的方向及大小有关,并且有可能为负值。     

On the dynamic behaviour of a piezoelectric laminate with multiple interfacial collinear cracks

This paper investigates the dynamic behaviour of a piezoelectric laminate containing multiple interfacial collinear cracks subjected to steady-state electro-mechanical loads. Both the permeable and impermeable boundary conditions are examined and discussed. Based on the use of integral transform techniques, the problem is reduced to a set of singular integral equations, which can be solved using Chebyshev polynomial expansions. Numerical results are provided to show the effect of the geometry of interacting collinear cracks, the applied electric fields, the electric boundary conditions along the crack faces and the loading frequency on the resulting dynamic stress intensity and electric displacement intensity factors.     

Limited permeable crack moving along the interface of a piezoelectric bi-material

A plane problem for a crack moving with a subsonic speed along the interface of two piezoelectric semi-infinite spaces is considered. The crack is assumed to be free from mechanical loading. The limited permeable electric condition with an account of electric traction is adopted at its faces. A uniformly distributed mixed mode mechanical loading and an electric flux are prescribed at infinity. The problem is reduced to the Riemann–Hilbert problem by means of introducing a moving coordinate system and assuming that the electric flux is uniformly distributed along the crack region. An exact solution of this problem is proposed. It permits to find in closed form all necessary electromechanical characteristics at the interface and to formulate the equation for the determination of the electric flux. Analysis of this equation confirms the correctness of the assumption concerning the uniform distribution of the electric flux in the crack region. The values of the electric flux are determined by solving the obtained equation. Thereafter, the stress and electric intensity factors as well as their asymptotic fields at the crack tip are also found. The particular case of a crack moving in a homogeneous piezoelectric material is considered. The values of the electric flux and the fracture parameters are found exactly in a simple form for this case. Also, a numerical analysis is performed for a crack propagating with a subsonic speed between PZT4 and PZT5 materials and for a crack moving in PZT4 material. The electric flux in the crack region, stress and electric intensity factors, crack opening and the energy release rate (ERR) are found as functions of the crack speed, loading and electric permeability of the crack medium. The influence of the electric traction on the crack faces upon the mentioned parameters is demonstrated.     

压电双材料界面钝裂纹附近螺型位错的屏蔽效应与发射条件

研究了压电双材料界面钝裂纹附近螺型位错的屏蔽效应与发射条件.应用保角变换技术,得到了复势函数与应力场的封闭形式解,讨论了位错方位、双材料电弹常数及裂纹钝化程度对位错屏蔽效应和发射条件的影响.结果表明,Burgers矢量为正的螺型位错可以降低界面钝裂纹尖端的应力强度因子(屏蔽效应),屏蔽效应随位错方位角及位错与裂纹尖端距...     

Pre-kinking of a moving crack in a magnetoelectroelastic material under in-plane loading

A constant moving crack in a magnetoelectroelastic material under in-plane mechanical, electric and magnetic loading is studied for impermeable crack surface boundary conditions. Fourier transform is employed to reduce the mixed boundary value problem of the crack to dual integral equations, which are solved exactly. Steady-state asymptotic fields near the crack tip are obtained in closed form and the corresponding field intensity factors are expressed explicitly. The crack speed influences the singular field distribution around the crack tip and the effects of electric and magnetic loading on the crack tip fields are discussed. The crack kinking phenomena is investigated using the maximum hoop stress intensity factor criterion. The magnitude of the maximum hoop stress intensity factor tends to increase as the crack speed increases.     

压电体中裂纹与孤立电偶极子的相互作用

研究压电体裂纹与电偶极子的相互作用,得到问题的闭合解,包括应力-电位移场,裂纹张开位移和电势差,以及裂尖应力强度因子,结果表明,电偶极子的方向对裂纹场的影响可由压电体各向异性方向函数表示;当电偶极子位于裂尖附近时,在原点取在裂尖的局部极坐标系中电偶极子位置的极角对裂尖场的影响可由各向异性方向函数表示,电偶极子引起的裂尖应力强度因子与其距裂尖的距离的-3/2次幂成正比。     

功能梯度压电板条中电绝缘型运动裂纹的电弹性场

基于三维弹性理论和压电理论，对材料系数按指数函数规律分布的功能梯度压电板条中的反平面运动裂纹问题进行了求解。利用Fourier积分变换方法将电绝缘型运动裂纹问题化为对偶积分方程，并进一步归结为易于求解的第二类Fredholm积分方程。通过渐近分析，获得了裂纹尖端应力、应变、电位移和电场的解析解，给出了裂纹尖端场各个变量的角分布函数，并求得了裂纹尖端场的强度因子，分析了压电材料物性梯度参数、几何尺寸及裂纹运动速度对它们的影响。结果表明，对于电绝缘型裂纹，功能梯度压电板条中运动裂纹尖端附近的各个场变量都具有-1／2阶的奇异性；当裂纹运动速度增大时，裂纹扩展的方向会偏离裂纹面。     

Mode III crack problems for two bonded functionally graded piezoelectric materials

This paper investigates the singular electromechanical field near the crack tips of an internal crack. The crack is perpendicular to the interface formed by bonding two half planes of different functionally graded piezoelectric material. The properties of two materials, such as elastic modulus, piezoelectric constant and dielectric constant, are assumed in exponential forms and vary along the crack direction. The singular integral equations for impermeable and permeable cracks are derived and solved by using the Gauss–Chebyshev integration technique. It shows that the stresses and electrical displacements around the crack tips have the conventional square root singularity. The stress intensity and electric displacement intensity factors are highly affected by the material nonhomogeneity parameters β and γ. The solutions for some degenerated problems can also be obtained.     

An interface crack with partially electrically conductive crack faces under antiplane mechanical and in-plane electric loadings

An interface crack in a bimaterial piezoelectric space under the action of antiplane mechanical and in-plane electric loadings is analyzed. One zone of the crack faces is electrically conductive while the other part is electrically permeable. All electro-mechanical values are presented using sectionally-analytic vector-functions and a combined Dirichlet-Riemann boundary value problem is formulated. An exact analytical solution of this problem is obtained. Simple analytical expressions for the shear stress, electric field and also for mechanical displacement jump of the crack faces are derived. These values are also presented graphically along the corresponding parts of the material interface. Singular points of the shear stress, electric field and electric displacement jump are found. Their intensity factors are determined as well. Intensity factors variations with respect to the external electric field and different ratios between the electrically conductive and electrically permeable crack face zones are also demonstrated.     

压电薄板板边导电裂纹尖端的力电场分析

采用有限元方法，分析了压电薄板板边不同长度导电裂纹尖端的力电场分布规律，发现导电裂纹尖端的应力场和电场强度存在明显的集中和奇异现象，集中和奇异的程度与裂纹长度有关。而且，在裂纹延长线上分别存在两点，这里的应力和电场对裂纹长度不太敏感，总等于无裂纹时薄板的均匀应力和均匀电场强度；同时，还研究了导电裂纹尖端的应力强度因子和电场强度因子对裂纹长度的依赖关系，发现在线性本构的前提下，导电裂纹尖端的应力强度因子与电场强度因子之间具有近似的线性关系。     

基于新型裂尖杂交元的压电材料断裂力学研究

提出了一种裂尖邻域杂交元模型，将其与标准杂交应力元结合来求解压电材料裂纹尖 端的奇性电弹场和断裂参数的数值解．裂纹尖端杂交元的建立步骤为：1) 利用高次内插有限元特征法求解特征问题，得到反映裂尖奇异性电弹场状况的特 征值和特征角分布函数；2) 利用广义Hellinger-Reissner变分泛函以及特征问题的解来建立裂尖邻域杂交元模型．该 方法求解电弹场时，摒弃了传统有限元方法中裂尖奇异性场需要借助解析解的做法，也避免 了单纯有限元方法中需要在裂尖端部进行高密度单元划分．采用PZT5板中心裂纹问题 作为考核例，数值结果显示了良好的精确性．作为进一步应用，求解了含中心界面裂纹 的PZT4-PZT5两相压电材料的应力强度因子和电位移强度因子．所有的算例都考虑 了3种裂纹面电边界条件．     

Analysis of electric boundary condition effects on crack propagation in piezoelectric ceramics

There are three types of cracks: impermeable crack, permeable crack and conducting crack, with different electric boundary conditions on faces of cracks in piezoelectric ceramics, which poses difficulties in the analysis of piezoelectric fracture problems. In this paper, in contrast to our previous FEM formulation, the numerical analysis is based on the used of exact electric boundary conditions at the crack faces, thus the common assumption of electric impermeability in the FEM analysis is avoided. The crack behavior and elasto-electric fields near a crack tip in a PZT-5 piezoelectric ceramic under mechanical, electrical and coupled mechanical-electrical loads with different electric boundary conditions on crack faces are investigated. It is found that the dielectric medium between the crack faces will reduce the singularity of stress and electric displacement. Furthermore, when the permittivity of the dielectric medium in the crack gap is of the same order as that of the piezoelectric ceramic, the crack becomes a conducting crack, the applied electric field has no effect on the crack propagation. The project supported by the National Natural Science Foundation of China (19672026, 19891180)