Use of sodium tetraethylborate for the analysis of trimethyllead species in artificial rainwater and a natural road dust sample

Several artificial rainwater samples and a natural sample of road dust have been analysed for trimethyllead under the aegis of a European Union Measurement and Testing (Bureau of Community Reference — BCR) intercomparison exercise, using a new and simplified purge and trap ethylation technique. Levels of trimethyllead found have been similar to those reported at lower levels from the natural environment. The method has been successful in the presence of excess amounts of inorganic lead, even for organic lead levels one tenth of those recently reported for the natural environment.     

An interlaboratory comparison on whole water samples

The European Water Framework Directive 2000/60/EC requires monitoring of organic priority pollutants in so-called whole water samples, i.e. in aqueous non-filtered samples that contain natural colloidal and suspended particulate matter. Colloids and suspended particles in the liquid phase constitute a challenge for sample homogeneity and stability. Within the joint research project ENV08 “Traceable measurements for monitoring critical pollutants under the European Water Framework Directive 2000/60/EC”, whole water test materials were developed by spiking defined amounts of aqueous slurries of ultra-finely milled contaminated soil or sediment and aqueous solutions of humic acid into a natural mineral water matrix. This paper presents the results of an European-wide interlaboratory comparison (ILC) using this type of test materials. Target analytes were tributyltin, polybrominated diphenyl ethers and polycyclic aromatic hydrocarbons in the ng/L concentration range. Results of the ILC indicate that the produced materials are sufficiently homogeneous and stable to serve as samples for, e.g. proficiency testing or method validation. To our knowledge, this is the first time that ready-to-use water materials with a defined amount of suspended particulate and colloidal matter have been applied as test samples in an interlaboratory exercise. These samples meet the requirements of the European Water Framework Directive. Previous proficiency testing schemes mainly employed filtered water samples fortified with a spike of the target analyte in a water-miscible organic solvent.     

The proton spectrum including 13C-satellites of π-benzenechromium tricarbonyl in a nematic solvent

The proton spectrum of π-benzenechromium tricarbonyl with ¹³C-satellites due to ring- and carbonyl-carbons at natural abundance has been investigated in a nematic solvent. The structural data are found to be in agreement with those from electron and neutron diffraction measurements. The proton–proton indirect coupling constants have also been determined.     

VACUUM ULTRAVIOLET NATURAL AND MAGNETIC CIRCULAR DICHROISM WITH CONVENTIONAL SOURCES AND SYNCHROTRON RADIATION

Vacuum ultraviolet natural and magnetic circular dichroism measurements have added significantly to our knowledge of the geometric and electronic structure of molecules and have provided a better understanding of the correct approach for theoretical calculations. In this review, I define natural and magnetic circular dichroism, and discuss information obtained with these techniques. The instrumentation for vacuum ultraviolet natural and magnetic circular dichroism is reviewed, from its beginning with conventional sources to the present time use of synchrotron radiation. The future possibilities and challenges for these measurements are examined with particular reference to making measurements to higher energies.     

Stress relaxation of rubbers in tension— the simple approach

Stress relaxation measurements in tension are potentially an elegant way of assessing the accelerated ageing characteristics of rubbers. Generally, relatively specialised and expensive test equipment is required and this has perhaps contributed to the lack of widespread adoption of stress relaxation as a routine measurement. Recently, tensile stress relaxation measurements have been proposed for international standardisation and the proposal included a simplified procedure using a tensile machine. This method is described and an example of results compared to the change of modulus after natural ageing is given.     

An intercomparison exercise on the determination of neptunium-237 in an environmental material

An intercomparison exercise has been carried out on the measurement of²³⁷Np in a sample of sea-born sediment taken from the estuary of the River Esk in Cumbria, United Kingdom. The sediment had been contaminated by radioactive liquid discharges from the nuclear fuels reprocessing plant at Sellafield. The measure of agreement between the submitted values was such that one would accept with confidence²³⁷Np analyses reported by the participating laboratories. The exercise was arranged by the Analysts' Informal Working Group (AIWG). The AIWG is a small group of chemists from several Government laboratories in the United Kingdom having an interest in radionuclides in the environment. From time-to-time the Group arranges intercomparison exercises; these exercises are in addition to the members' normal quality assurance schemes, and in addition to intercomparison exercises arranged by other organizations. So far as the authors are aware, there has been no report of such an exercise involving²³⁷Np, and there appear to be no natural matrix reference materials available for environmental²³⁷Np.     

Certification of two human hair reference materials issued by the International Atomic Energy Agency

Two new human hair reference materials, with different levels of mercury and methylmercury, have been developed and characterized by the International Atomic Energy Agency, for use in validation of measurements for mercury exposure. The set of materials consists of IAEA-086, with a low level of methylmercury, and IAEA-085, with an elevated methylmercury level. An international intercomparison exercise was carried out, and 68 institutes from 40 countries have contributed data. Based on the evaluation of the results from the intercomparison and analyses by expert laboratories, values of 23.2 and 0.57 mg/kg total mercury are recommended for IAEA-085 and IAEA-086, respectively. Values for methylmercury are recommended at 22.9 mg/kg, MeHg as Hg, for IAEA-085, and at 0.26 mg/kg, MeHg as Hg, for IAEA-086. Recommended and information values are also given for other selected trace elements.     

Application of multivariate self-modeling curve resolution to the quantitation of trace levels of organophosphorus pesticides in natural waters from interlaboratory studies

Multivariate self-modeling curve resolution is applied to the quantitation of coeluted organophosphorus pesticides: fenitrothion, azinphos-ethyl, diazinon, fenthion and parathion-ethyl. Analysis of these pesticides at levels of 0.1 to 1 μg/l in the presence of natural interferences is achieved using automated on-line liquid-solid extraction (Prospekt) coupled to liquid chromatography and diode array detection followed by a recently developed multivariate self-modeling curve resolution method. The proposed approach uses only 100 ml of natural water sample and has improved resolution of the coeluted organophosphorus insecticides and their quantitation at trace level. The results have been compared with those obtained by different laboratories participating in the Aquacheck interlaboratory exercise (WRC, Medmenham, UK) where more conventional analytical techniques are being used.     

Degradation and stabilisation of blue water pipe

Degradation caused by natural and artificial exposure of blue polyethylene water pipe compounds has been studied using thermal, spectroscopic and mechanical testing techniques. The results indicate that whilst thermal properties can be used as an effective quality control tool, deterioration of mechanical properties corresponds rather more with carbonyl index measurements. Samples in thin and thick sections have been studied and differences in behaviour are noted, with thick section samples retaining mechanical (impact) properties even after substantial degradation has occurred.

Limitations in the use of artificial exposure to monitor changes that occur during natural weathering are discussed. It is concluded that, in thick section, the surface nature of ultraviolet degradation in the extreme conditions of artificial exposure affects mechanical properties in a different manner than longer-term periods of natural exposure.     

Seasonal variation, chemical behavior and kinetics of uranium in an unconfined groundwater system

The seasonal changes in the concentration of uranium in an unconfined groundwater system in Cyprus have been investigated and compared to corresponding changes of boron and salinity, to better understand the chemical behavior of uranium in the respective system. Uranium concentration measurements were performed by alpha spectroscopy after selective pre-concentration, whereas boron concentration analysis and electrical conductivity measurements were carried out by photometry using azomethine-H and an electrical conductivity electrode, respectively. The experimental data show that seasonal variations are mainly related to rainwater infiltration and the specific chemical behavior of a species. Increased levels of uranium and boron in natural water systems are attributed to the increased stability of the uranium(VI)-carbonato complexes and the boric acid, which are in natural waters the predominant chemical species for uranium and boron, respectively. Dilution/dissolution processes govern the seasonal concentration changes of uranium and boron in a groundwater system, however redox-reactions resulting in the reduction of U(VI) to U(IV) affect significantly the concentration of uranium in the respective system, particularly under suboxic conditions.     

Activation cross-sections of longer lived products of proton induced nuclear reactions on cobalt up to 70 MeV

As a part of our series of studies on charged particle induced reactions on various target materials, proton induced excitation functions on natural cobalt have been determined by using the stacked-foil technique. In these measurements the radionuclides ^55,56,57,58Co, ⁵¹Cr, ^52,54,56Mn and ^56,57Ni have been identified. For the above mentioned nuclides the cross-sections were derived from the measured activities and were compared with the literature data and with the results of EMPIRE code calculations and tabulated values in the TENDL 2011 library (based on TALYS code calculations). The agreement with previous measurements and with theoretical values was acceptable.     

Thorium series disequilibrium and geochemical processes in estuarine sediments of Mandovi river

The measurements of natural radioactivity due to thorium isotopes have been carried out in estuarine sediments of Mandovi river (Goa). The geochemical behaviour of these sediments has been studied by leaching the samples with 5 % ethylenediaminetetraacetic acid at pH 3.0 in order to investigate the processes occurring on the surface of the sediment particles and the distribution of natural thorium in estuarine sediments. The²²⁸Th/²³²Th activity ratios have been found to be in the range of 2.00 to 2.12. This anomaly between²³²Th and²²⁸Th has been attributed to the preferential leaching of²²⁸Ra by water flowing over these sediments. The activities of²²⁸Ra on the surface labile layers of the sediments have also been determined. The²³⁰Th/²³²Th activity ratios have been found to be in the range of 0.94 to 1.04. These ratios are mainly dependent on the precipitation action of²³⁰Th on adjacent sediments.     

Synthesis and properties of novel chiral-amine-functionalized ionic liquids

A novel class of chiral-amine-functionalized ionic liquids (CAFILs) has been synthesized efficiently from natural amino acids, and their structures have been determined by spectroscopic analysis and low temperature X-ray diffraction analysis. The CAFILs have been characterized by physical properties such as melting point, glass transition temperature, thermal degradation and specific rotation. NMR measurements indicate that the CAFILs may be promising alternatives in the field of chiral discrimination.     

The Fluorophore 4′,6‐Diamidino‐2‐phenylindole (DAPI) Induces DNA Folding in Long Double‐Stranded DNA

DAPI (4′,6‐diamidino‐2‐phenylindole) is a widely used fluorescent dye, whose complicated binding features to DNAs and RNAs have been the object of debates and are still not fully understood. In this study, different approaches were employed, including binding equilibrium measurements (spectrofluorometry), melting experiments (spectrophotometry), viscometric measurements, circular dichroism, and T‐jump kinetic analyses; all data concur in shedding light on the complex mechanistic aspects of the binding mode of DAPI to natural DNA. Conditions are found that induce the mode of the DAPI/DNA interaction to change from groove binding to intercalation. Moreover, it is observed, for the first time, that DAPI is able to induce the formation of a rather compact polymer–dye adduct under particular conditions. The results suggest that this form is a folded or coiled DNA structure stabilized by DAPI dye bridges.     

Natural radioactivity in bioassay by alpha-spectrometry measurements

Personnel of nuclear facilities are checked regularly for internal contamination by bioassay measurements. Although these persons are generally not involved in any incident, natural radioactivity from U, Th and Ra can be found in their urine or faeces. Uranium total activity in urine has been found with a range of 0.051 to 3.0 mBq/24 h and in faeces from 14.5 to 380 mBq/d. ²³⁴U/²³⁸U ratio for urine is 1.48 but this ratio varies from 0.47 to 19. By comparison, the ²³⁴U/²³⁸U ratio found in urine from workers in volved with natural uranium or 4.5% enriched uranium is 1.0 and around 4.0 respectively. ²³⁰Th, ²²⁸Th and sometimes ²³²Th have also been detected. The total thorium activity varies from 0.137 to 5.6 mBq/24 h in urine and from 9 to 183 mBq/d in faeces. ²²⁸Th has generally been found in excess of ²³²Th. All these measurements were performed by alpha-spectrometry. The few ²²⁶Ra results have been measured using the Lucas or emanation method.     

Determination of boron isotopic variations in aquatic systems with negative thermal ionization mass spectrometry as a tracer for anthropogenic influences

A technique for precise boron isotope ratio measurements with a high detection power has been developed by negative thermal ionization mass spectrometry (NTIMS). Relative standard deviations in the range of 0.03-0.3% have been obtained for the determination of the (11)B/(10)B isotope ratio using nanogram amounts of boron. Ba(OH)(2) has been applied as ionization promoter for the formation of negative thermal ions. By adding MgCl(2) better reproducibilities of the measurement have been achieved. A possible interference of BO(-)(2) ions at mass number 42 by CNO(-) could be excluded by the sample preparation technique used. Contrary to other NTI techniques no dependence of the measured isotope ratio on the boron amount used has been observed. Anthropogenic and natural saline influences in ground water have been successfully identified by boron isotope ratio determinations with this NTIMS method, due to the different isotopic composition of boron in natural and anthropogenic substances. In sewage, the boron isotope ratio is substantially influenced by washing powder, which contains low (11)B/(10)B ratios (expressed in delta(11)B values normalized to the standard reference material NIST SRM 951). In contaminated ground water, low delta(11)B values are normally correlated with high boron and high chloride concentrations. On the other hand, delta(11)B shifts to higher values in less contaminated samples. For ground water with saline influences, only the delta(11)B determination, and not the boron or chloride content, allowed the correct identification of this natural source of contamination.     

Beryllium-7 activity at Comprehensive Nuclear-Test-Ban Treaty stations hosted by the United Kingdom

The Comprehensive Nuclear-Test-Ban Treaty (CTBT) is supported by a global network of monitoring stations that perform high-resolution gamma-spectrometry on air filter samples for the identification of radionuclides indicative of nuclear weapons tests and reactor incidents. These daily measurements have created an invaluable resource for understanding variations in natural background radioactivity, including the contribution of ⁷Be. Statistical analysis has been performed on ⁷Be data collected by CTBT stations hosted by the United Kingdom including at British Indian Ocean Territory (RN66), St Helena (RN67) and Tristan da Cunha (RN68) during 2005–2013. The results have been found to follow a lognormal distribution which implies that the ⁷Be activity is the multiplicative product of many small independent factors, such as meteorology, elevation, local station conditions, sample acquisition and analysis. This has the potential to identify discrepant measurements not attributable to the intrinsic variability of the distribution and indicative of station malfunction. Variations in ⁷Be activity have been considered on monthly, weekly and daily timescales and characterised using the geometric mean in accordance with the properties of the lognormal probability density function. Seasonal variations have been identified, with summer maxima and winter minima that are attributable to changes in mixing within the stratosphere and troposphere. Such fluctuations have been examined using the Fast Fourier Transform which may indicate variations associated with the 27 day solar cycle.     

State-of-the-art of gas chromatography-based methods for analysis of anthropogenic volatile organic compounds in estuarine waters,illustrated with the river Scheldt as an example

This review focuses on a number of key procedural steps in the analysis of volatile organic compounds (VOCs) in estuarine waters. The most critical step, from an analytical point of view, is sample preparation. So far, only purge-and-trap and, to some extent, membrane inlet mass spectrometry have successfully been applied in estuarine monitoring of VOCs. The advantages and disadvantages of both techniques are discussed and novel developments are reviewed. Other key elements in VOC analysis and assessment include quality assurance (QA), quality control (QC) and statistical data analysis. This paper gives a brief overview of QA/QC measures of interest in the estuarine monitoring exercise, and provides guidelines for adequate statistical treatment of environmental data. Finally, field measurements of VOCs in estuarine waters are reviewed. Concentrations are reported, and distribution patterns, sources and time-trends are discussed. In addition to literature data, results of a 3-year monitoring survey (May 1998–November 2000) in the Scheldt estuary are presented.     

Investigation of the helix unwinding process in thick freely suspended smectic films

Optical and electro-optical measurements have been performed on free-standing chiral smectic films sufficiently thick (10 000 layers) to preserve the natural smectic helix. The Goldstone mode appears at about 200Hz, showing that these films are a much better approximation of the 'ideal' smectic bulk state than a thick planar sample between glass plates (where the Goldstone mode is found at about 3 kHz). In these films the unwinding of the helix is studied, as a function of applied electric field, by monitoring Bragg reflections and their Fourier components. When the helix deforms, a reflection appears which at first sight might be taken for a subharmonic, but must be interpreted as the main 'full pitch mode' reflection relative to the 'half pitch' reflection from the undeformed helix. Our measurements further confirm that in anticlinic materials no helix unwinding takes place prior to the antiferroelectric-ferroelectric transition.     

STANDARDS FOR UV INSTRUMENTS AND RISK OF EXISTING DEVICES

Abstract— Different methods for measurements of UV-radiation of various light sources are quantitatively compared: direct measurements, based on detectors of known responsivity, as well as indirect measurements, based on a spectral irradiance calibration. The optical arrangement of an accurate spectroradiometric equipment, and the structure and parameters for a new type of cosine corrected detector for the measurement of actinic radiation are described, too. The measurements of actinic radiation with commercial devices are affected by great relative errors.
A standard for natural irradiance will allow a comparison of weighted irradiances and threshold irradiations with natural insolation and with artificial UV radiation. The risk of existing irradiation apparatuses will be calculable by this comparison.